- 15 Oct, 2018 40 commits
-
-
Qu Wenruo authored
And add one line comment explaining what we're doing for each loop. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
Some qgroup trace events like btrfs_qgroup_release_data() and btrfs_qgroup_free_delayed_ref() can still be triggered even if qgroup is not enabled. This is caused by the lack of qgroup status check before calling some qgroup functions. Thankfully the functions can handle quota disabled case well and just do nothing for qgroup disabled case. This patch will do earlier check before triggering related trace events. And for enabled <-> disabled race case: 1) For enabled->disabled case Disable will wipe out all qgroups data including reservation and excl/rfer. Even if we leak some reservation or numbers, it will still be cleared, so nothing will go wrong. 2) For disabled -> enabled case Current btrfs_qgroup_release_data() will use extent_io tree to ensure we won't underflow reservation. And for delayed_ref we use head->qgroup_reserved to record the reserved space, so in that case head->qgroup_reserved should be 0 and we won't underflow. CC: stable@vger.kernel.org # 4.14+ Reported-by:
Chris Murphy <lists@colorremedies.com> Link: https://lore.kernel.org/linux-btrfs/CAJCQCtQau7DtuUUeycCkZ36qjbKuxNzsgqJ7+sJ6W0dK_NLE3w@mail.gmail.com/Signed-off-by:
-
Filipe Manana authored
In a scenario like the following: mkdir /mnt/A # inode 258 mkdir /mnt/B # inode 259 touch /mnt/B/bar # inode 260 sync mv /mnt/B/bar /mnt/A/bar mv -T /mnt/A /mnt/B fsync /mnt/B/bar <power fail> After replaying the log we end up with file bar having 2 hard links, both with the name 'bar' and one in the directory with inode number 258 and the other in the directory with inode number 259. Also, we end up with the directory inode 259 still existing and with the directory inode 258 still named as 'A', instead of 'B'. In this scenario, file 'bar' should only have one hard link, located at directory inode 258, the directory inode 259 should not exist anymore and the name for directory inode 258 should be 'B'. This incorrect behaviour happens because when attempting to log the old parents of an inode, we skip any parents that no longer exist. Fix this by forcing a full commit if an old parent no longer exists. A test case for fstests follows soon. CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
When replaying a log which contains a tmpfile (which necessarily has a link count of 0) we end up calling inc_nlink(), at fs/btrfs/tree-log.c:replay_one_buffer(), which produces a warning like the following: [195191.943673] WARNING: CPU: 0 PID: 6924 at fs/inode.c:342 inc_nlink+0x33/0x40 [195191.943723] CPU: 0 PID: 6924 Comm: mount Not tainted 4.19.0-rc6-btrfs-next-38 #1 [195191.943724] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [195191.943726] RIP: 0010:inc_nlink+0x33/0x40 [195191.943728] RSP: 0018:ffffb96e425e3870 EFLAGS: 00010246 [195191.943730] RAX: 0000000000000000 RBX: ffff8c0d1e6af4f0 RCX: 0000000000000006 [195191.943731] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8c0d1e6af4f0 [195191.943731] RBP: 0000000000000097 R08: 0000000000000001 R09: 0000000000000000 [195191.943732] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb96e425e3a60 [195191.943733] R13: ffff8c0d10cff0c8 R14: ffff8c0d0d515348 R15: ffff8c0d78a1b3f8 [195191.943735] FS: 00007f570ee24480(0000) GS:ffff8c0dfb200000(0000) knlGS:0000000000000000 [195191.943736] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [195191.943737] CR2: 00005593286277c8 CR3: 00000000bb8f2006 CR4: 00000000003606f0 [195191.943739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [195191.943740] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [195191.943741] Call Trace: [195191.943778] replay_one_buffer+0x797/0x7d0 [btrfs] [195191.943802] walk_up_log_tree+0x1c1/0x250 [btrfs] [195191.943809] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943825] walk_log_tree+0xae/0x1d0 [btrfs] [195191.943840] btrfs_recover_log_trees+0x1d7/0x4d0 [btrfs] [195191.943856] ? replay_dir_deletes+0x280/0x280 [btrfs] [195191.943870] open_ctree+0x1c3b/0x22a0 [btrfs] [195191.943887] btrfs_mount_root+0x6b4/0x800 [btrfs] [195191.943894] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943899] ? pcpu_alloc+0x55b/0x7c0 [195191.943906] ? mount_fs+0x3b/0x140 [195191.943908] mount_fs+0x3b/0x140 [195191.943912] ? __init_waitqueue_head+0x36/0x50 [195191.943916] vfs_kern_mount+0x62/0x160 [195191.943927] btrfs_mount+0x134/0x890 [btrfs] [195191.943936] ? rcu_read_lock_sched_held+0x3f/0x70 [195191.943938] ? pcpu_alloc+0x55b/0x7c0 [195191.943943] ? mount_fs+0x3b/0x140 [195191.943952] ? btrfs_remount+0x570/0x570 [btrfs] [195191.943954] mount_fs+0x3b/0x140 [195191.943956] ? __init_waitqueue_head+0x36/0x50 [195191.943960] vfs_kern_mount+0x62/0x160 [195191.943963] do_mount+0x1f9/0xd40 [195191.943967] ? memdup_user+0x4b/0x70 [195191.943971] ksys_mount+0x7e/0xd0 [195191.943974] __x64_sys_mount+0x21/0x30 [195191.943977] do_syscall_64+0x60/0x1b0 [195191.943980] entry_SYSCALL_64_after_hwframe+0x49/0xbe [195191.943983] RIP: 0033:0x7f570e4e524a [195191.943986] RSP: 002b:00007ffd83589478 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [195191.943989] RAX: ffffffffffffffda RBX: 0000563f335b2060 RCX: 00007f570e4e524a [195191.943990] RDX: 0000563f335b2240 RSI: 0000563f335b2280 RDI: 0000563f335b2260 [195191.943992] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000020 [195191.943993] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000563f335b2260 [195191.943994] R13: 0000563f335b2240 R14: 0000000000000000 R15: 00000000ffffffff [195191.944002] irq event stamp: 8688 [195191.944010] hardirqs last enabled at (8687): [<ffffffff9cb004c3>] console_unlock+0x503/0x640 [195191.944012] hardirqs last disabled at (8688): [<ffffffff9ca037dd>] trace_hardirqs_off_thunk+0x1a/0x1c [195191.944018] softirqs last enabled at (8638): [<ffffffff9cc0a5d1>] __set_page_dirty_nobuffers+0x101/0x150 [195191.944020] softirqs last disabled at (8634): [<ffffffff9cc26bbe>] wb_wakeup_delayed+0x2e/0x60 [195191.944022] ---[ end trace 5d6e873a9a0b811a ]--- This happens because the inode does not have the flag I_LINKABLE set, which is a runtime only flag, not meant to be persisted, set when the inode is created through open(2) if the flag O_EXCL is not passed to it. Except for the warning, there are no other consequences (like corruptions or metadata inconsistencies). Since it's pointless to replay a tmpfile as it would be deleted in a later phase of the log replay procedure (it has a link count of 0), fix this by not logging tmpfiles and if a tmpfile is found in a log (created by a kernel without this change), skip the replay of the inode. A test case for fstests follows soon. Fixes: 471d557a ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay") CC: stable@vger.kernel.org # 4.18+ Reported-by:
Martin Steigerwald <martin@lichtvoll.de> Link: https://lore.kernel.org/linux-btrfs/3666619.NTnn27ZJZE@merkaba/Signed-off-by:
-
Josef Bacik authored
We don't need it, rsv->size is set once and never changes throughout its lifetime, so just use that for the reserve size. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Josef Bacik authored
I ran into an issue where there was some reference being held on an inode that I couldn't track. This assert wasn't triggered, but it at least rules out we're doing something stupid. Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Josef Bacik authored
Allocating new chunks modifies both the extent and chunk tree, which can trigger new chunk allocations. So instead of doing list_for_each_safe, just do while (!list_empty()) so we make sure we don't exit with other pending bg's still on our list. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
-
Josef Bacik authored
We need to clear the max_extent_size when we clear bits from a bitmap since it could have been from the range that contains the max_extent_size. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
If we're allocating a new space cache inode it's likely going to be under a transaction handle, so we need to use memalloc_nofs_save() in order to avoid deadlocks, and more importantly lockdep messages that make xfstests fail. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Josef Bacik authored
We want to release the unused reservation we have since it refills the delayed refs reserve, which will make everything go smoother when running the delayed refs if we're short on our reservation. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Liu Bo authored
Btrfs's btree locking has two modes, spinning mode and blocking mode, while searching btree, locking is always acquired in spinning mode and then converted to blocking mode if necessary, and in some hot paths we may switch the locking back to spinning mode by btrfs_clear_path_blocking(). When acquiring locks, both of reader and writer need to wait for blocking readers and writers to complete before doing read_lock()/write_lock(). The problem is that btrfs_clear_path_blocking() needs to switch nodes in the path to blocking mode at first (by btrfs_set_path_blocking) to make lockdep happy before doing its actual clearing blocking job. When switching to blocking mode from spinning mode, it consists of step 1) bumping up blocking readers counter and step 2) read_unlock()/write_unlock(), this has caused serious ping-pong effect if there're a great amount of concurrent readers/writers, as waiters will be woken up and go to sleep immediately. 1) Killing this kind of ping-pong results in a big improvement in my 1600k files creation script, MNT=/mnt/btrfs mkfs.btrfs -f /dev/sdf mount /dev/def $MNT time fsmark -D 10000 -S0 -n 100000 -s 0 -L 1 -l /tmp/fs_log.txt \ -d $MNT/0 -d $MNT/1 \ -d $MNT/2 -d $MNT/3 \ -d $MNT/4 -d $MNT/5 \ -d $MNT/6 -d $MNT/7 \ -d $MNT/8 -d $MNT/9 \ -d $MNT/10 -d $MNT/11 \ -d $MNT/12 -d $MNT/13 \ -d $MNT/14 -d $MNT/15 w/o patch: real 2m27.307s user 0m12.839s sys 13m42.831s w/ patch: real 1m2.273s user 0m15.802s sys 8m16.495s 1.1) latency histogram from funclatency[1] Overall with the patch, there're ~50% less write lock acquisition and the 95% max latency that write lock takes also reduces to ~100ms from >500ms. -------------------------------------------- w/o patch: -------------------------------------------- Function = btrfs_tree_lock msecs : count distribution 0 -> 1 : 2385222 |****************************************| 2 -> 3 : 37147 | | 4 -> 7 : 20452 | | 8 -> 15 : 13131 | | 16 -> 31 : 3877 | | 32 -> 63 : 3900 | | 64 -> 127 : 2612 | | 128 -> 255 : 974 | | 256 -> 511 : 165 | | 512 -> 1023 : 13 | | Function = btrfs_tree_read_lock msecs : count distribution 0 -> 1 : 6743860 |****************************************| 2 -> 3 : 2146 | | 4 -> 7 : 190 | | 8 -> 15 : 38 | | 16 -> 31 : 4 | | -------------------------------------------- w/ patch: -------------------------------------------- Function = btrfs_tree_lock msecs : count distribution 0 -> 1 : 1318454 |****************************************| 2 -> 3 : 6800 | | 4 -> 7 : 3664 | | 8 -> 15 : 2145 | | 16 -> 31 : 809 | | 32 -> 63 : 219 | | 64 -> 127 : 10 | | Function = btrfs_tree_read_lock msecs : count distribution 0 -> 1 : 6854317 |****************************************| 2 -> 3 : 2383 | | 4 -> 7 : 601 | | 8 -> 15 : 92 | | 2) dbench also proves the improvement, dbench -t 120 -D /mnt/btrfs 16 w/o patch: Throughput 158.363 MB/sec w/ patch: Throughput 449.52 MB/sec 3) xfstests didn't show any additional failures. One thing to note is that callers may set path->leave_spinning to have all nodes in the path stay in spinning mode, which means callers are ready to not sleep before releasing the path, but it won't cause problems if they don't want to sleep in blocking mode. [1]: https://github.com/iovisor/bcc/blob/master/tools/funclatency.pySigned-off-by: -
David Sterba authored
The value of blocking_readers is increased only when the lock is taken for read, no way we can fail the condition with the write lock. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
David Sterba authored
The replace_wait and bio_counter were mistakenly added to fs_info in commit c404e0dc ("Btrfs: fix use-after-free in the finishing procedure of the device replace"), but they logically belong to fs_info::dev_replace. Besides, bio_counter is a very generic name and is confusing in bare fs_info context. Reviewed-by:
-
David Sterba authored
The exit sequence in btrfs_dev_replace_start does not allow to simply add a label to the right place so the error handling after starting transaction failure jumps there. Currently there's a lock that pairs with the unlock in the section, which is unnecessary and only raises questions. Add a variable to track the locking status and avoid the extra locking. Reviewed-by:
-
David Sterba authored
Too trivial, the purpose can be simply documented in a comment. Reviewed-by:
-
David Sterba authored
The wrapper is too trivial, open coding does not make it less readable. Reviewed-by:
-
David Sterba authored
There's a single caller and the function name does not say it's actually taking the lock, so open coding makes it more explicit. For now, btrfs_dev_replace_read_lock is used instead of read_lock so it's paired with the unlocking wrapper in the same block. Reviewed-by:
-
David Sterba authored
This member seems to be copied from the extent_buffer locking scheme and is at least used to assert that the read lock/unlock is properly nested. In some way. While the _inc/_dec are called inside the read lock section, the asserts are both inside and outside, so the ordering is not guaranteed and we can see read/inc/dec ordered in any way (theoretically). A missing call of btrfs_dev_replace_clear_lock_blocking could cause unexpected read_locks count, so this at least looks like a valid assertion, but this will become unnecessary with later updates. Reviewed-by:
-
Qu Wenruo authored
Although we have tree level check at tree read runtime, it's completely based on its parent level. We still need to do accurate level check to avoid invalid tree blocks sneak into kernel space. The check itself is simple, for leaf its level should always be 0. For nodes its level should be in range [1, BTRFS_MAX_LEVEL - 1]. Signed-off-by:
Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by:
-
Qu Wenruo authored
For qgroup_trace_extent_swap(), if we find one leaf that needs to be traced, we will also iterate all file extents and trace them. This is OK if we're relocating data block groups, but if we're relocating metadata block groups, balance code itself has ensured that both subtree of file tree and reloc tree contain the same contents. That's to say, if we're relocating metadata block groups, all file extents in reloc and file tree should match, thus no need to trace them. This should reduce the total number of dirty extents processed in metadata block group balance. [[Benchmark]] (with all previous enhancement) Hardware: VM 4G vRAM, 8 vCPUs, disk is using 'unsafe' cache mode, backing device is SAMSUNG 850 evo SSD. Host has 16G ram. Mkfs parameter: --nodesize 4K (To bump up tree size) Initial subvolume contents: 4G data copied from /usr and /lib. (With enough regular small files) Snapshots: 16 snapshots of the original subvolume. each snapshot has 3 random files modified. balance parameter: -m So the content should be pretty similar to a real world root fs layout. | v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22929 | 22851 | -0.3% qgroup dirty extents | 227757 | 140886 | -38.1% time (sys) | 65.253s | 37.464s | -42.6% time (real) | 74.032s | 44.722s | -39.6% Signed-off-by: -
Qu Wenruo authored
Reloc tree doesn't contribute to qgroup numbers, as we have accounted them at balance time (see replace_path()). Skipping the unneeded subtree tracing should reduce the overhead. [[Benchmark]] Hardware: VM 4G vRAM, 8 vCPUs, disk is using 'unsafe' cache mode, backing device is SAMSUNG 850 evo SSD. Host has 16G ram. Mkfs parameter: --nodesize 4K (To bump up tree size) Initial subvolume contents: 4G data copied from /usr and /lib. (With enough regular small files) Snapshots: 16 snapshots of the original subvolume. each snapshot has 3 random files modified. balance parameter: -m So the content should be pretty similar to a real world root fs layout. | v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22929 | 22900 | -0.1% qgroup dirty extents | 227757 | 167139 | -26.6% time (sys) | 65.253s | 50.123s | -23.2% time (real) | 74.032s | 52.551s | -29.0% Signed-off-by: -
Qu Wenruo authored
Before this patch, with quota enabled during balance, we need to mark the whole subtree dirty for quota. E.g. OO = Old tree blocks (from file tree) NN = New tree blocks (from reloc tree) File tree (src) Reloc tree (dst) OO (a) NN (a) / \ / \ (b) OO OO (c) (b) NN NN (c) / \ / \ / \ / \ OO OO OO OO (d) OO OO OO NN (d) For old balance + quota case, quota will mark the whole src and dst tree dirty, including all the 3 old tree blocks in reloc tree. It's doable for small file tree or new tree blocks are all located at lower level. But for large file tree or new tree blocks are all located at higher level, this will lead to mark the whole tree dirty, and be unbelievably slow. This patch will change how we handle such balance with quota enabled case. Now we will search from (b) and (c) for any new tree blocks whose generation is equal to @last_snapshot, and only mark them dirty. In above case, we only need to trace tree blocks NN(b), NN(c) and NN(d). (NN(a) will be traced when COW happens for nodeptr modification). And also for tree blocks OO(b), OO(c), OO(d). (OO(a) will be traced when COW happens for nodeptr modification.) For above case, we could skip 3 tree blocks, but for larger tree, we can skip tons of unmodified tree blocks, and hugely speed up balance. This patch will introduce a new function, btrfs_qgroup_trace_subtree_swap(), which will do the following main work: 1) Read out real root eb And setup basic dst_path for later calls 2) Call qgroup_trace_new_subtree_blocks() To trace all new tree blocks in reloc tree and their counter parts in the file tree. Signed-off-by: -
Qu Wenruo authored
Introduce new function, qgroup_trace_new_subtree_blocks(), to iterate all new tree blocks in a reloc tree. So that qgroup could skip unrelated tree blocks during balance, which should hugely speedup balance speed when quota is enabled. The function qgroup_trace_new_subtree_blocks() itself only cares about new tree blocks in reloc tree. All its main works are: 1) Read out tree blocks according to parent pointers 2) Do recursive depth-first search Will call the same function on all its children tree blocks, with search level set to current level -1. And will also skip all children whose generation is smaller than @last_snapshot. 3) Call qgroup_trace_extent_swap() to trace tree blocks So although we have parameter list related to source file tree, it's not used at all, but only passed to qgroup_trace_extent_swap(). Thus despite the tree read code, the core should be pretty short and all about recursive depth-first search. Signed-off-by:
-
Qu Wenruo authored
Introduce a new function, qgroup_trace_extent_swap(), which will be used later for balance qgroup speedup. The basis idea of balance is swapping tree blocks between reloc tree and the real file tree. The swap will happen in highest tree block, but there may be a lot of tree blocks involved. For example: OO = Old tree blocks NN = New tree blocks allocated during balance File tree (257) Reloc tree for 257 L2 OO NN / \ / \ L1 OO OO (a) OO NN (a) / \ / \ / \ / \ L0 OO OO OO OO OO OO NN NN (b) (c) (b) (c) When calling qgroup_trace_extent_swap(), we will pass: @src_eb = OO(a) @dst_path = [ nodes[1] = NN(a), nodes[0] = NN(c) ] @dst_level = 0 @root_level = 1 In that case, qgroup_trace_extent_swap() will search from OO(a) to reach OO(c), then mark both OO(c) and NN(c) as qgroup dirty. The main work of qgroup_trace_extent_swap() can be split into 3 parts: 1) Tree search from @src_eb It should acts as a simplified btrfs_search_slot(). The key for search can be extracted from @dst_path->nodes[dst_level] (first key). 2) Mark the final tree blocks in @src_path and @dst_path qgroup dirty NOTE: In above case, OO(a) and NN(a) won't be marked qgroup dirty. They should be marked during preivous (@dst_level = 1) iteration. 3) Mark file extents in leaves dirty We don't have good way to pick out new file extents only. So we still follow the old method by scanning all file extents in the leave. This function can free us from keeping two pathes, thus later we only need to care about how to iterate all new tree blocks in reloc tree. Signed-off-by: -
Qu Wenruo authored
Number of qgroup dirty extents is directly linked to the performance overhead, so add a new trace event, trace_qgroup_num_dirty_extents(), to record how many dirty extents is processed in btrfs_qgroup_account_extents(). This will be pretty handy to analyze later balance performance improvement. Signed-off-by:
-
Qu Wenruo authored
fs/btrfs/relocation.c:build_backref_tree() is some code from 2009 era, although it works pretty fine, it's not that easy to understand. Especially combined with the complex btrfs backref format. This patch adds some basic comment for the backref build part of the code, making it less hard to read, at least for backref searching part. Signed-off-by:
-
Omar Sandoval authored
The only aops we define for symlinks are identical to the aops for regular files. This has been the case since symlink support was added in commit 2b8d99a7 ("Btrfs: symlinks and hard links"). As far as I can tell, there wasn't a good reason to have separate aops then, and there isn't now, so let's just do what most other filesystems do and reuse the same structure. Signed-off-by:
-
Chris Mason authored
During buffered writes, we follow this basic series of steps: again: lock all the pages wait for writeback on all the pages Take the extent range lock wait for ordered extents on the whole range clean all the pages if (copy_from_user_in_atomic() hits a fault) { drop our locks goto again; } dirty all the pages release all the locks The extra waiting, cleaning and locking are there to make sure we don't modify pages in flight to the drive, after they've been crc'd. If some of the pages in the range were already dirty when the write began, and we need to goto again, we create a window where a dirty page has been cleaned and unlocked. It may be reclaimed before we're able to lock it again, which means we'll read the old contents off the drive and lose any modifications that had been pending writeback. We don't actually need to clean the pages. All of the other locking in place makes sure we don't start IO on the pages, so we can just leave them dirty for the duration of the write. Fixes: 73d59314 (the original btrfs merge) CC: stable@vger.kernel.org # v4.4+ Signed-off-by:Chris Mason <clm@fb.com> Reviewed-by:
-
David Sterba authored
The helper does the same math and we take care about the special case when flags is 0 too. Reviewed-by:
-
Nikolay Borisov authored
Refactor the delayed refs loop by using the newly introduced btrfs_run_delayed_refs_for_head function. This greatly simplifies __btrfs_run_delayed_refs and makes it more obvious what is happening. We now have 1 loop which iterates the existing delayed_heads and then each selected ref head is processed by the new helper. All existing semantics of the code are preserved so no functional changes. Signed-off-by:
-
Nikolay Borisov authored
This patch introduces a new helper encompassing the implicit inner loop in __btrfs_run_delayed_refs which processes all the refs for a given head. The code is mostly copy/paste, the only difference is that if we detect a newer reference then -EAGAIN is returned so that callers can react correctly. Also, at the end of the loop the head is relocked and btrfs_merge_delayed_refs is run again to retain the pre-refactoring semantics. Signed-off-by:
-
Nikolay Borisov authored
This is in preparation to refactor the giant loop in __btrfs_run_delayed_refs. As a first step define a new function which implements acquiring a reference to a btrfs_delayed_refs_head and use it. No functional changes. Signed-off-by:
-
David Sterba authored
Avoid the inline ifdefs and use two sections for self-tests enabled and disabled. Though there could be no ifdef and unconditional test_bit of BTRFS_FS_STATE_DUMMY_FS_INFO, the static inline can help to optimize out any code that would depend on conditions using btrfs_is_testing. As this is only for the testing code, drop unlikely(). Reviewed-by:
-
David Sterba authored
Reviewed-by:
-
David Sterba authored
The data used only for tests are better placed at the end of the structure so that they don't change the structure layout. All new members of btrfs_root should be placed before. Reviewed-by:
-
David Sterba authored
The helper find_lock_delalloc_range is now conditionally built static, dpending on whether the self-tests are enabled or not. There's a macro that is supposed to hide the export, used only once. To discourage further use, drop it an add a public wrapper for the helper needed by tests. Reviewed-by:
-
Liu Bo authored
rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). While resolving indirect refs and missing refs, it always looks for the first rb entry in a while loop, it's helpful to use rb_first_cached instead. For more details about the optimization see patch "Btrfs: delayed-refs: use rb_first_cached for href_root". Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by:
-
Liu Bo authored
rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). As evict_inode_truncate_pages() removes all extent mapping by always looking for the first rb entry, it's helpful to use rb_first_cached instead. For more details about the optimization see patch "Btrfs: delayed-refs: use rb_first_cached for href_root". Tested-by:
-
Liu Bo authored
rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). Functions manipulating delayed_item need to get the first entry, this converts it to use rb_first_cached(). For more details about the optimization see patch "Btrfs: delayed-refs: use rb_first_cached for href_root". Tested-by:
-
Liu Bo authored
rb_first_cached() trades an extra pointer "leftmost" for doing the same job as rb_first() but in O(1). Functions manipulating href->ref_tree need to get the first entry, this converts href->ref_tree to use rb_first_cached(). For more details about the optimization see patch "Btrfs: delayed-refs: use rb_first_cached for href_root". Tested-by:
-
