- 22 Oct, 2015 28 commits
-
-
Robert Jarzmik authored
commit 8811191f upstream. PCM receive and transmit DMA requestor lines were reverted, breaking the PCM playback interface for PXA platforms using the sound/soc/ variant instead of the sound/arm variant. The commit below shows the inversion in the requestor lines. Fixes: d65a1458 ("ASoC: pxa: use snd_dmaengine_dai_dma_data") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Flatness authored
commit e8ff581f upstream. The MacBookPro 12,1 has the same setup as the 11 for controlling the status of the optical audio light. Simply apply the existing workaround to the subsystem ID for the 12,1. [sorted the fixup entry by tiwai] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105401Signed-off-by:
John Flatness <john@zerocrates.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 225db576 upstream. When OSS emulation is loaded on ISA SB AWE32 chip, we get now kernel warnings like: WARNING: CPU: 0 PID: 2791 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x51/0x80() sysfs: cannot create duplicate filename '/devices/isa/sbawe.0/sound/card0/seq-oss-0-0' It's because both emux synth and opl3 drivers try to register their OSS device object with the same static index number 0. This hasn't been a big problem until the recent rewrite of device management code (that exposes sysfs at the same time), but it's been an obvious bug. This patch works around it just by using a different index number of emux synth object. There can be a more elegant way to fix, but it's enough for now, as this code won't be touched so often, in anyway. Reported-and-tested-by:
Michael Shell <list1@michaelshell.org> Signed-off-by:
-
Mel Gorman authored
commit 2f84a899 upstream. SunDong reported the following on https://bugzilla.kernel.org/show_bug.cgi?id=103841 I think I find a linux bug, I have the test cases is constructed. I can stable recurring problems in fedora22(4.0.4) kernel version, arch for x86_64. I construct transparent huge page, when the parent and child process with MAP_SHARE, MAP_PRIVATE way to access the same huge page area, it has the opportunity to lead to huge page copy on write failure, and then it will munmap the child corresponding mmap area, but then the child mmap area with VM_MAYSHARE attributes, child process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags functions (vma - > vm_flags & VM_MAYSHARE). There were a number of problems with the report (e.g. it's hugetlbfs that triggers this, not transparent huge pages) but it was fundamentally correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that looks like this vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800 prot 8000000000000027 anon_vma (null) vm_ops ffffffff8182a7a0 pgoff 0 file ffff88106bdb9800 private_data (null) flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb) ------------ kernel BUG at mm/hugetlb.c:462! SMP Modules linked in: xt_pkttype xt_LOG xt_limit [..] CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012 set_vma_resv_flags+0x2d/0x30 The VM_BUG_ON is correct because private and shared mappings have different reservation accounting but the warning clearly shows that the VMA is shared. When a private COW fails to allocate a new page then only the process that created the VMA gets the page -- all the children unmap the page. If the children access that data in the future then they get killed. The problem is that the same file is mapped shared and private. During the COW, the allocation fails, the VMAs are traversed to unmap the other private pages but a shared VMA is found and the bug is triggered. This patch identifies such VMAs and skips them. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Reported-by:
SunDong <sund_sky@126.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Rientjes <rientjes@google.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tan, Jui Nee authored
commit 02bc933e upstream. On Intel Baytrail, there is case when interrupt handler get called, no SPI message is captured. The RX FIFO is indeed empty when RX timeout pending interrupt (SSSR_TINT) happens. Use the BIOS version where both HSUART and SPI are on the same IRQ. Both drivers are using IRQF_SHARED when calling the request_irq function. When running two separate and independent SPI and HSUART application that generate data traffic on both components, user will see messages like below on the console: pxa2xx-spi pxa2xx-spi.0: bad message state in interrupt handler This commit will fix this by first checking Receiver Time-out Interrupt, if it is disabled, ignore the request and return without servicing. Signed-off-by:
Tan, Jui Nee <jui.nee.tan@intel.com> Acked-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Guenter Roeck authored
commit a394d635 upstream. Actually, spi_master_put() after spi_alloc_master() must _not_ be followed by kfree(). The memory is already freed with the call to spi_master_put() through spi_master_class, which registers a release function. Calling both spi_master_put() and kfree() results in often nasty (and delayed) crashes elsewhere in the kernel, often in the networking stack. This reverts commit eb4af0f5. Link to patch and concerns: https://lkml.org/lkml/2012/9/3/269 or http://lkml.iu.edu/hypermail/linux/kernel/1209.0/00790.html Alexey Klimov: This revert becomes valid after 94c69f76 when spi-imx.c has been fixed and there is no need to call kfree() so comment for spi_alloc_master() should be fixed. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by:
-
Peter Zijlstra authored
commit 95913d97 upstream. So the problem this patch is trying to address is as follows: CPU0 CPU1 context_switch(A, B) ttwu(A) LOCK A->pi_lock A->on_cpu == 0 finish_task_switch(A) prev_state = A->state <-. WMB | A->on_cpu = 0; | UNLOCK rq0->lock | | context_switch(C, A) `-- A->state = TASK_DEAD prev_state == TASK_DEAD put_task_struct(A) context_switch(A, C) finish_task_switch(A) A->state == TASK_DEAD put_task_struct(A) The argument being that the WMB will allow the load of A->state on CPU0 to cross over and observe CPU1's store of A->state, which will then result in a double-drop and use-after-free. Now the comment states (and this was true once upon a long time ago) that we need to observe A->state while holding rq->lock because that will order us against the wakeup; however the wakeup will not in fact acquire (that) rq->lock; it takes A->pi_lock these days. We can obviously fix this by upgrading the WMB to an MB, but that is expensive, so we'd rather avoid that. The alternative this patch takes is: smp_store_release(&A->on_cpu, 0), which avoids the MB on some archs, but not important ones like ARM. Reported-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 0b34a166 upstream. Currently there is a number of issues preventing PVHVM Xen guests from doing successful kexec/kdump: - Bound event channels. - Registered vcpu_info. - PIRQ/emuirq mappings. - shared_info frame after XENMAPSPACE_shared_info operation. - Active grant mappings. Basically, newly booted kernel stumbles upon already set up Xen interfaces and there is no way to reestablish them. In Xen-4.7 a new feature called 'soft reset' is coming. A guest performing kexec/kdump operation is supposed to call SCHEDOP_shutdown hypercall with SHUTDOWN_soft_reset reason before jumping to new kernel. Hypervisor (with some help from toolstack) will do full domain cleanup (but keeping its memory and vCPU contexts intact) returning the guest to the state it had when it was first booted and thus allowing it to start over. Doing SHUTDOWN_soft_reset on Xen hypervisors which don't support it is probably OK as by default all unknown shutdown reasons cause domain destroy with a message in toolstack log: 'Unknown shutdown reason code 5. Destroying domain.' which gives a clue to what the problem is and eliminates false expectations. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Stephen Smalley authored
commit ab76f7b4 upstream. Unused space between the end of __ex_table and the start of rodata can be left W+x in the kernel page tables. Extend the setting of the NX bit to cover this gap by starting from text_end rather than rodata_start. Before: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB x pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd After: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB NX pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443704662-3138-1-git-send-email-sds@tycho.nsa.govSigned-off-by:
-
Matt Fleming authored
commit a5caa209 upstream. Beginning with UEFI v2.5 EFI_PROPERTIES_TABLE was introduced that signals that the firmware PE/COFF loader supports splitting code and data sections of PE/COFF images into separate EFI memory map entries. This allows the kernel to map those regions with strict memory protections, e.g. EFI_MEMORY_RO for code, EFI_MEMORY_XP for data, etc. Unfortunately, an unwritten requirement of this new feature is that the regions need to be mapped with the same offsets relative to each other as observed in the EFI memory map. If this is not done crashes like this may occur, BUG: unable to handle kernel paging request at fffffffefe6086dd IP: [<fffffffefe6086dd>] 0xfffffffefe6086dd Call Trace: [<ffffffff8104c90e>] efi_call+0x7e/0x100 [<ffffffff81602091>] ? virt_efi_set_variable+0x61/0x90 [<ffffffff8104c583>] efi_delete_dummy_variable+0x63/0x70 [<ffffffff81f4e4aa>] efi_enter_virtual_mode+0x383/0x392 [<ffffffff81f37e1b>] start_kernel+0x38a/0x417 [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef Here 0xfffffffefe6086dd refers to an address the firmware expects to be mapped but which the OS never claimed was mapped. The issue is that included in these regions are relative addresses to other regions which were emitted by the firmware toolchain before the "splitting" of sections occurred at runtime. Needless to say, we don't satisfy this unwritten requirement on x86_64 and instead map the EFI memory map entries in reverse order. The above crash is almost certainly triggerable with any kernel newer than v3.13 because that's when we rewrote the EFI runtime region mapping code, in commit d2f7cbe7 ("x86/efi: Runtime services virtual mapping"). For kernel versions before v3.13 things may work by pure luck depending on the fragmentation of the kernel virtual address space at the time we map the EFI regions. Instead of mapping the EFI memory map entries in reverse order, where entry N has a higher virtual address than entry N+1, map them in the same order as they appear in the EFI memory map to preserve this relative offset between regions. This patch has been kept as small as possible with the intention that it should be applied aggressively to stable and distribution kernels. It is very much a bugfix rather than support for a new feature, since when EFI_PROPERTIES_TABLE is enabled we must map things as outlined above to even boot - we have no way of asking the firmware not to split the code/data regions. In fact, this patch doesn't even make use of the more strict memory protections available in UEFI v2.5. That will come later. Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by:
Matt Fleming <matt.fleming@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Chun-Yi <jlee@suse.com> Cc: Dave Young <dyoung@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: James Bottomley <JBottomley@Odin.com> Cc: Lee, Chun-Yi <jlee@suse.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443218539-7610-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
-
Dirk Müller authored
commit d2922422 upstream. The cpu feature flags are not ever going to change, so warning everytime can cause a lot of kernel log spam (in our case more than 10GB/hour). The warning seems to only occur when nested virtualization is enabled, so it's probably triggered by a KVM bug. This is a sensible and safe change anyway, and the KVM bug fix might not be suitable for stable releases anyway. Signed-off-by:
Dirk Mueller <dmueller@suse.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 83c133cf upstream. The NMI entry code that switches to the normal kernel stack needs to be very careful not to clobber any extra stack slots on the NMI stack. The code is fine under the assumption that SWAPGS is just a normal instruction, but that assumption isn't really true. Use SWAPGS_UNSAFE_STACK instead. This is part of a fix for some random crashes that Sasha saw. Fixes: 9b6e6a83 ("x86/nmi/64: Switch stacks on userspace NMI entry") Reported-and-tested-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/974bc40edffdb5c2950a5c4977f821a446b76178.1442791737.git.luto@kernel.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andy Lutomirski authored
commit fc57a7c6 upstream. PARAVIRT_ADJUST_EXCEPTION_FRAME generates this code (using nmi as an example, trimmed for readability): ff 15 00 00 00 00 callq *0x0(%rip) # 2796 <nmi+0x6> 2792: R_X86_64_PC32 pv_irq_ops+0x2c That's a call through a function pointer to regular C function that does nothing on native boots, but that function isn't protected against kprobes, isn't marked notrace, and is certainly not guaranteed to preserve any registers if the compiler is feeling perverse. This is bad news for a CLBR_NONE operation. Of course, if everything works correctly, once paravirt ops are patched, it gets nopped out, but what if we hit this code before paravirt ops are patched in? This can potentially cause breakage that is very difficult to debug. A more subtle failure is possible here, too: if _paravirt_nop uses the stack at all (even just to push RBP), it will overwrite the "NMI executing" variable if it's called in the NMI prologue. The Xen case, perhaps surprisingly, is fine, because it's already written in asm. Fix all of the cases that default to paravirt_nop (including adjust_exception_frame) with a big hammer: replace paravirt_nop with an asm function that is just a ret instruction. The Xen case may have other problems, so document them. This is part of a fix for some random crashes that Sasha saw. Reported-and-tested-by:
-
David Woodhouse authored
commit 03da3ff1 upstream. In 2007, commit 07190a08 ("Mark TSC on GeodeLX reliable") bypassed verification of the TSC on Geode LX. However, this code (now in the check_system_tsc_reliable() function in arch/x86/kernel/tsc.c) was only present if CONFIG_MGEODE_LX was set. OpenWRT has recently started building its generic Geode target for Geode GX, not LX, to include support for additional platforms. This broke the timekeeping on LX-based devices, because the TSC wasn't marked as reliable: https://dev.openwrt.org/ticket/20531 By adding a runtime check on is_geode_lx(), we can also include the fix if CONFIG_MGEODEGX1 or CONFIG_X86_GENERIC are set, thus fixing the problem. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Cc: Andres Salomon <dilinger@queued.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1442409003.131189.87.camel@infradead.orgSigned-off-by:
-
Shaohua Li authored
commit 5d7c631d upstream. The APIC LVTT register is MMIO mapped but the TSC_DEADLINE register is an MSR. The write to the TSC_DEADLINE MSR is not serializing, so it's not guaranteed that the write to LVTT has reached the APIC before the TSC_DEADLINE MSR is written. In such a case the write to the MSR is ignored and as a consequence the local timer interrupt never fires. The SDM decribes this issue for xAPIC and x2APIC modes. The serialization methods recommended by the SDM differ. xAPIC: "1. Memory-mapped write to LVT Timer Register, setting bits 18:17 to 10b. 2. WRMSR to the IA32_TSC_DEADLINE MSR a value much larger than current time-stamp counter. 3. If RDMSR of the IA32_TSC_DEADLINE MSR returns zero, go to step 2. 4. WRMSR to the IA32_TSC_DEADLINE MSR the desired deadline." x2APIC: "To allow for efficient access to the APIC registers in x2APIC mode, the serializing semantics of WRMSR are relaxed when writing to the APIC registers. Thus, system software should not use 'WRMSR to APIC registers in x2APIC mode' as a serializing instruction. Read and write accesses to the APIC registers will occur in program order. A WRMSR to an APIC register may complete before all preceding stores are globally visible; software can prevent this by inserting a serializing instruction, an SFENCE, or an MFENCE before the WRMSR." The xAPIC method is to just wait for the memory mapped write to hit the LVTT by checking whether the MSR write has reached the hardware. There is no reason why a proper MFENCE after the memory mapped write would not do the same. Andi Kleen confirmed that MFENCE is sufficient for the xAPIC case as well. Issue MFENCE before writing to the TSC_DEADLINE MSR. This can be done unconditionally as all CPUs which have TSC_DEADLINE also have MFENCE support. [ tglx: Massaged the changelog ] Signed-off-by:
Shaohua Li <shli@fb.com> Reviewed-by:
-
Andy Shevchenko authored
commit 6bea0f6d upstream. In case we have less than maximum allowed channels (8) and autoconfiguration is enabled the DWC_PARAMS read is wrong because it uses different arithmetic to what is needed for channel priority setup. Re-do the caclulations properly. This now works on AVR32 board well. Fixes: fed2574b (dw_dmac: introduce software emulation of LLP transfers) Cc: yitian.bu@tangramtek.com Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit 1dbdad75 upstream. The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the pins up, communication with tca6424a doesn't work (controller timeouts) and it is not possible to enable HDMI. Fixes: 9be495c4 ("ARM: dts: omap5-evm: Add I2c pinctrl data") Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Paul Bolle authored
commit fe2b5921 upstream. wf_unregister_client() increments the client count when a client unregisters. That is obviously incorrect. Decrement that client count instead. Fixes: 75722d39 ("[PATCH] ppc64: Thermal control for SMU based machines") Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ard Biesheuvel authored
commit a077224f upstream. While working on the 32-bit ARM port of UEFI, I noticed a strange corruption in the kernel log. The following snprintf() statement (in drivers/firmware/efi/efi.c:efi_md_typeattr_format()) snprintf(pos, size, "|%3s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]", was producing the following output in the log: | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | | | | |UC] |RUN| | | | | | | |UC] As it turns out, this is caused by incorrect code being emitted for the string() function in lib/vsprintf.c. The following code if (!(spec.flags & LEFT)) { while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } } for (i = 0; i < len; ++i) { if (buf < end) *buf = *s; ++buf; ++s; } while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } when called with len == 0, triggers an issue in the GCC SRA optimization pass (Scalar Replacement of Aggregates), which handles promotion of signed struct members incorrectly. This is a known but as yet unresolved issue. (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932). In this particular case, it is causing the second while loop to be executed erroneously a single time, causing the additional space characters to be printed. So disable the optimization by passing -fno-ipa-sra. Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
commit 9b55613f upstream. When a kernel is built covering ARMv6 to ARMv7, we omit to clear the IT state when entering a signal handler. This can cause the first few instructions to be conditionally executed depending on the parent context. In any case, the original test for >= ARMv7 is broken - ARMv6 can have Thumb-2 support as well, and an ARMv6T2 specific build would omit this code too. Relax the test back to ARMv6 or greater. This results in us always clearing the IT state bits in the PSR, even on CPUs where these bits are reserved. However, they're reserved for the IT state, so this should cause no harm. Fixes: d71e1352 ("Clear the IT state when invoking a Thumb-2 signal handler") Acked-by:
H. Nikolaus Schaller <hns@goldelico.com> Tested-by:
-
Guenter Roeck authored
commit 728d2940 upstream. The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit caa47047 upstream. The original patch introducing this header wrote the number of CPUs available and online in one order and then swapped those values when reading, fix it. Before: # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 # echo 0 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 3 # echo 0 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 2 After the fix, bringing back the CPUs online: # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 2 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 3 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: fbe96f29 ("perf tools: Make perf.data more self-descriptive (v8)") Link: http://lkml.kernel.org/r/20150911153323.GP23511@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Kan Liang authored
commit 601083cf upstream. print_aggr() fails to print per-core/per-socket statistics after commit 582ec082 ("perf stat: Fix per-socket output bug for uncore events") if events have differnt cpus. Because in print_aggr(), aggr_get_id needs index (not cpu id) to find core/pkg id. Also, evsel cpu maps should be used to get aggregated id. Here is an example: Counting events cycles,uncore_imc_0/cas_count_read/. (Uncore event has cpumask 0,18) $ perf stat -e cycles,uncore_imc_0/cas_count_read/ -C0,18 --per-core sleep 2 Without this patch, it failes to get CPU 18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 7526851 cycles S0-C0 1 1.05 MiB uncore_imc_0/cas_count_read/ S1-C0 0 <not counted> cycles S1-C0 0 <not counted> MiB uncore_imc_0/cas_count_read/ With this patch, it can get both CPU0 and CPU18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 6327768 cycles S0-C0 1 0.47 MiB uncore_imc_0/cas_count_read/ S1-C0 1 330228 cycles S1-C0 1 0.29 MiB uncore_imc_0/cas_count_read/ Signed-off-by:
Kan Liang <kan.liang@intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 582ec082 ("perf stat: Fix per-socket output bug for uncore events") Link: http://lkml.kernel.org/r/1435820925-51091-1-git-send-email-kan.liang@intel.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit e8e6d37e upstream. When we introduce a new sort key, we need to update the hists__calc_col_len() function accordingly, otherwise the width will be limited to strlen(header). We can't update it when obtaining a line value for a column (for instance, in sort__srcline_cmp()), because we reset it all when doing a resort (see hists__output_recalc_col_len()), so we need to, from what is in the hist_entry fields, set each of the column widths. Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Fixes: 409a8be6 ("perf tools: Add sort by src line/number") Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.orgSigned-off-by:
-
Adrian Hunter authored
commit b5cabbcb upstream. A copy of /proc/kcore containing the kernel text can be made to the buildid cache. e.g. perf buildid-cache -v -k /proc/kcore To workaround objdump limitations, a copy is also made when annotating against /proc/kcore. The copying process stops working from libelf about v1.62 onwards (the problem was found with v1.63). The cause is that a call to gelf_getphdr() in kcore__add_phdr() fails because additional validation has been added to gelf_getphdr(). The use of gelf_getphdr() is a misguided attempt to get default initialization of the Gelf_Phdr structure. That should not be necessary because every member of the Gelf_Phdr structure is subsequently assigned. So just remove the call to gelf_getphdr(). Similarly, a call to gelf_getehdr() in gelf_kcore__init() can be removed also. Committer notes: Note to stable@kernel.org, from Adrian in the cover letter for this patchkit: The "Fix copying of /proc/kcore" problem goes back to v3.13 if you think it is important enough for stable. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443089122-19082-3-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Jenny Derzhavetz authored
commit a4c15cd9 upstream. As documented in iscsit_sequence_cmd: /* * Existing callers for iscsit_sequence_cmd() will silently * ignore commands with CMDSN_LOWER_THAN_EXP, so force this * return for CMDSN_MAXCMDSN_OVERRUN as well.. */ We need to silently finish a command when it's in ISTATE_REMOVE. This fixes an teardown hang we were seeing where a mis-behaved initiator (triggered by allocation error injections) sent us a cmdsn which was lower than expected. Signed-off-by:
Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Michal Hocko authored
commit 537b604c upstream. b9d5c6b7 ("[SCSI] cleanup setting task state in scsi_error_handler()") has introduced a race between scsi_error_handler and scsi_host_dev_release resulting in the hang when the device goes away because scsi_error_handler might miss a wake up: CPU0 CPU1 scsi_error_handler scsi_host_dev_release kthread_stop() kthread_should_stop() test_bit(KTHREAD_SHOULD_STOP) set_bit(KTHREAD_SHOULD_STOP) wake_up_process() wait_for_completion() set_current_state(TASK_INTERRUPTIBLE) schedule() The most straightforward solution seems to be to invert the ordering of the set_current_state and kthread_should_stop. The issue has been noticed during reboot test on a 3.0 based kernel but the current code seems to be affected in the same way. [jejb: additional comment added] Reported-and-debugged-by:
Mike Mayer <Mike.Meyer@teradata.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Jason Wang authored
commit 8f4216c7 upstream. Currently, if we had a zero length mmio eventfd assigned on KVM_MMIO_BUS. It will never be found by kvm_io_bus_cmp() since it always compares the kvm_io_range() with the length that guest wrote. This will cause e.g for vhost, kick will be trapped by qemu userspace instead of vhost. Fixing this by using zero length if an iodevice is zero length. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
- 01 Oct, 2015 12 commits
-
-
Greg Kroah-Hartman authored
-
Keith Busch authored
commit fb35e914 upstream. If an NVMe device becomes ready but fails to create IO queues, the driver creates a character device handle so the device can be managed. The device reference count needs to be initialized before creating the character device. Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
-
Jan Kara authored
commit 23b133bd upstream. Check length of extended attributes and allocation descriptors when loading inodes from disk. Otherwise corrupted filesystems could confuse the code and make the kernel oops. This fixes CVE-2015-4167. Reported-by:
Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by:
Jan Kara <jack@suse.cz> [Use make_bad_inode() instead of branching due to older implementation.] Signed-off-by:
Chas Williams <3chas3@gmail.com> Signed-off-by:
-
Andy Lutomirski authored
commit 810bc075 upstream. We have a tricky bug in the nested NMI code: if we see RSP pointing to the NMI stack on NMI entry from kernel mode, we assume that we are executing a nested NMI. This isn't quite true. A malicious userspace program can point RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to happen while RSP is still pointing at the NMI stack. Fix it with a sneaky trick. Set DF in the region of code that the RSP check is intended to detect. IRET will clear DF atomically. ( Note: other than paravirt, there's little need for all this complexity. We could check RIP instead of RSP. ) Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andy Lutomirski authored
commit a27507ca upstream. Check the repeat_nmi .. end_repeat_nmi special case first. The next patch will rework the RSP check and, as a side effect, the RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so we'll need this ordering of the checks. Note: this is more subtle than it appears. The check for repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code instead of adjusting the "iret" frame to force a repeat. This is necessary, because the code between repeat_nmi and end_repeat_nmi sets "NMI executing" and then writes to the "iret" frame itself. If a nested NMI comes in and modifies the "iret" frame while repeat_nmi is also modifying it, we'll end up with garbage. The old code got this right, as does the new code, but the new code is a bit more explicit. If we were to move the check right after the "NMI executing" check, then we'd get it wrong and have random crashes. ( Because the "NMI executing" check would jump to the code that would modify the "iret" frame without checking if the interrupted NMI was currently modifying it. ) Signed-off-by:
-
Andy Lutomirski authored
commit 0b22930e upstream. I found the nested NMI documentation to be difficult to follow. Improve the comments. Signed-off-by:
-
Andy Lutomirski authored
commit 9b6e6a83 upstream. Returning to userspace is tricky: IRET can fail, and ESPFIX can rearrange the stack prior to IRET. The NMI nesting fixup relies on a precise stack layout and atomic IRET. Rather than trying to teach the NMI nesting fixup to handle ESPFIX and failed IRET, punt: run NMIs that came from user mode on the normal kernel stack. This will make some nested NMIs visible to C code, but the C code is okay with that. As a side effect, this should speed up perf: it eliminates an RDMSR when NMIs come from user mode. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Andy Lutomirski authored
commit 0e181bb5 upstream. Now that do_nmi saves CR2, we don't need to save it in asm. Signed-off-by:
-
Andy Lutomirski authored
commit 9d050416 upstream. 32-bit kernels handle nested NMIs in C. Enable the exact same handling on 64-bit kernels as well. This isn't currently necessary, but it will become necessary once the asm code starts allowing limited nesting. Signed-off-by:
-
Markus Pargmann authored
This reverts commit 279c039c which was commit 06d2f6ca upstream as it should not have been applied. Reported-by:
Luis Henriques <luis.henriques@canonical.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 1e16aa3d ] skb_gso_segment() has a 'features' argument representing offload features available to the output path. A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use those instead of the provided ones when handing encapsulation/tunnels. Depending on dev->hw_enc_features of the output device skb_gso_segment() can then return NULL even when the caller has disabled all GSO feature bits, as segmentation of inner header thinks device will take care of segmentation. This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs that did not fit the remaining token quota as the segmentation does not work when device supports corresponding hw offload capabilities. Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net> [jay.vosburgh: backported to 3.14. ] Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit ade4dc3e ] The commit "e29aa339 bna: Enable Multi Buffer RX" moved packets counter increment from the beginning of the NAPI processing loop after the check for erroneous packets so they are never accounted. This counter is used to inform firmware about number of processed completions (packets). As these packets are never acked the firmware fires IRQs for them again and again. Fixes: e29aa339 ("bna: Enable Multi Buffer RX") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by:
-
