- 09 Nov, 2022 14 commits
-
-
Khazhismel Kumykov authored
oom_bfqq is just a fallback bfqq, so shouldn't be used with waker detection. Suggested-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Khazhismel Kumykov <khazhy@google.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk>
-
Khazhismel Kumykov authored
This fixes crashes in bfq_add_bfqq_busy due to waker_bfqq being NULL, but woken_list_node still being hashed. This would happen when bfq_init_rq() expects a brand new allocated queue to be returned from bfq_get_bfqq_handle_split() and unconditionally updates waker_bfqq without resetting woken_list_node. Since we can always return oom_bfqq when attempting to allocate, we cannot assume waker_bfqq starts as NULL. Avoid setting woken_bfqq for oom_bfqq entirely, as it's not useful. Crashes would have a stacktrace like: [160595.656560] bfq_add_bfqq_busy+0x110/0x1ec [160595.661142] bfq_add_request+0x6bc/0x980 [160595.666602] bfq_insert_request+0x8ec/0x1240 [160595.671762] bfq_insert_requests+0x58/0x9c [160595.676420] blk_mq_sched_insert_request+0x11c/0x198 [160595.682107] blk_mq_submit_bio+0x270/0x62c [160595.686759] __submit_bio_noacct_mq+0xec/0x178 [160595.691926] submit_bio+0x120/0x184 [160595.695990] ext4_mpage_readpages+0x77c/0x7c8 [160595.701026] ext4_readpage+0x60/0xb0 [160595.705158] filemap_read_page+0x54/0x114 [160595.711961] filemap_fault+0x228/0x5f4 [160595.716272] do_read_fault+0xe0/0x1f0 [160595.720487] do_fault+0x40/0x1c8 Tested by injecting random failures into bfq_get_queue, crashes go away completely. Fixes: 8ef3fc3a ("block, bfq: make shared queues inherit wakers") Signed-off-by:
-
Christoph Böhmwalder authored
(Sort of) cherry-picked from the out-of-tree drbd9 branch. Original commit message by Joel Colledge: This simplifies drbd_submit_peer_request by removing most of the arguments. It also makes the treatment of the op better aligned with that in struct bio. Determine fault_type dynamically using information which is already available instead of passing it in as a parameter. Note: The opf in receive_rs_deallocated was changed from REQ_OP_WRITE_ZEROES to REQ_OP_DISCARD. This was required in the out-of-tree module, and does not matter in-tree. The opf is ignored anyway in drbd_submit_peer_request, since the discard/zero-out is decided by the EE_TRIM flag. Signed-off-by:Joel Colledge <joel.colledge@linbit.com> Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221109133453.51652-4-christoph.boehmwalder@linbit.comSigned-off-by:
-
Philipp Reisner authored
The discard_granularity describes the minimum unit of a discard. If that is larger than the maximal discard size, we need to disable discards completely. Reviewed-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
-
Christoph Böhmwalder authored
We currently only set q->limits.max_discard_sectors, but that is not enough. Another field, max_hw_discard_sectors, was introduced in commit 0034af03 ("block: make /sys/block/<dev>/queue/discard_max_bytes writeable"). The difference is that max_discard_sectors can be changed from user space via sysfs, while max_hw_discard_sectors is the "hardware" upper limit. So use this helper, which sets both. This is also a fixup for commit 998e9cbc ("drbd: cleanup decide_on_discard_support"): if discards are not supported, that does not necessarily mean we also want to disable write_zeroes. Fixes: 998e9cbc ("drbd: cleanup decide_on_discard_support") Reviewed-by:
-
Logan Gunthorpe authored
Add documentation for the p2pmem/allocate binary file which allows for allocating p2pmem buffers in userspace for passing to drivers that support them. (Currently only O_DIRECT to NVMe devices.) Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20221021174116.7200-10-logang@deltatee.comSigned-off-by:
-
Logan Gunthorpe authored
Create a sysfs bin attribute called "allocate" under the existing "p2pmem" group. The only allowable operation on this file is the mmap() call. When mmap() is called on this attribute, the kernel allocates a chunk of memory from the genalloc and inserts the pages into the VMA. The dev_pagemap .page_free callback will indicate when these pages are no longer used and they will be put back into the genalloc. On device unbind, remove the sysfs file before the memremap_pages are cleaned up. This ensures unmap_mapping_range() is called on the files inode and no new mappings can be created. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Logan Gunthorpe authored
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be passed from userspace and enables the NVMe passthru requests to use P2PDMA pages. Signed-off-by:
-
Logan Gunthorpe authored
When a bio's queue supports PCI P2PDMA, set FOLL_PCI_P2PDMA for iov_iter_get_pages_flags(). This allows PCI P2PDMA pages to be passed from userspace and enables the O_DIRECT path in iomap based filesystems and direct to block devices. Signed-off-by:
-
Logan Gunthorpe authored
Consecutive zone device pages should not be merged into the same sgl or bvec segment with other types of pages or if they belong to different pgmaps. Otherwise getting the pgmap of a given segment is not possible without scanning the entire segment. This helper returns true either if both pages are not zone device pages or both pages are zone device pages with the same pgmap. Factor out the check for page mergability into a pages_are_mergable() helper and add a check with zone_device_pages_are_mergeable(). Signed-off-by:
-
Logan Gunthorpe authored
Consecutive zone device pages should not be merged into the same sgl or bvec segment with other types of pages or if they belong to different pgmaps. Otherwise getting the pgmap of a given segment is not possible without scanning the entire segment. This helper returns true either if both pages are not zone device pages or both pages are zone device pages with the same pgmap. Add a helper to determine if zone device pages are mergeable and use this helper in page_is_mergeable(). Signed-off-by:
-
Logan Gunthorpe authored
Add iov_iter_get_pages_flags() and iov_iter_get_pages_alloc_flags() which take a flags argument that is passed to get_user_pages_fast(). This is so that FOLL_PCI_P2PDMA can be passed when appropriate. Signed-off-by:
-
Logan Gunthorpe authored
GUP Callers that expect PCI P2PDMA pages can now set FOLL_PCI_P2PDMA to allow obtaining P2PDMA pages. If GUP is called without the flag and a P2PDMA page is found, it will return an error in try_grab_page() or try_grab_folio(). The check is safe to do before taking the reference to the page in both cases seeing the page should be protected by either the appropriate ptl or mmap_lock; or the gup fast guarantees preventing TLB flushes. try_grab_folio() has one call site that WARNs on failure and cannot actually deal with the failure of this function (it seems it will get into an infinite loop). Expand the comment there to document a couple more conditions on why it will not fail. FOLL_PCI_P2PDMA cannot be set if FOLL_LONGTERM is set. This is to copy fsdax until pgmap refcounts are fixed (see the link below for more information). Link: https://lkml.kernel.org/r/Yy4Ot5MoOhsgYLTQ@ziepe.caSigned-off-by:
-
Logan Gunthorpe authored
In order to add checks for P2PDMA memory into try_grab_page(), expand the error return from a bool to an int/error code. Update all the callsites handle change in usage. Also remove the WARN_ON_ONCE() call at the callsites seeing there already is a WARN_ON_ONCE() inside the function if it fails. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
- 07 Nov, 2022 1 commit
-
-
Yang Li authored
Remove the description of @required_features in elevator_match() to clear the below warning: block/elevator.c:103: warning: Excess function parameter 'required_features' description in 'elevator_match' Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2734 Fixes: ffb86425 ("block: don't check for required features in elevator_match") Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20221107062255.2685-1-yang.lee@linux.alibaba.comSigned-off-by:
-
- 02 Nov, 2022 21 commits
-
-
Jinlong Chen authored
if-else is more readable than goto here. Signed-off-by:
Jinlong Chen <nickyc975@zju.edu.cn> Link: https://lore.kernel.org/r/d3306fa4e92dc9cc614edc8f1802686096bafef2.1667356813.git.nickyc975@zju.edu.cnSigned-off-by:
-
Jinlong Chen authored
Use goto-style error handling like we do elsewhere in the kernel. Signed-off-by:
-
Chao Leng authored
All controller namespaces share the same tagset, so we can use this interface which does the optimal operation for parallel quiesce based on the tagset type(e.g. blocking tagsets and non-blocking tagsets). nvme connect_q should not be quiesced when quiesce tagset, so set the QUEUE_FLAG_SKIP_TAGSET_QUIESCE to skip it when init connect_q. Currently we use NVME_NS_STOPPED to ensure pairing quiescing and unquiescing. If use blk_mq_[un]quiesce_tagset, NVME_NS_STOPPED will be invalided, so introduce NVME_CTRL_STOPPED to replace NVME_NS_STOPPED. In addition, we never really quiesce a single namespace. It is a better choice to move the flag from ns to ctrl. Signed-off-by:
Chao Leng <lengchao@huawei.com> [hch: rebased on top of prep patches] Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
Chao Leng authored
Drivers that have shared tagsets may need to quiesce potentially a lot of request queues that all share a single tagset (e.g. nvme). Add an interface to quiesce all the queues on a given tagset. This interface is useful because it can speedup the quiesce by doing it in parallel. Because some queues should not need to be quiesced (e.g. the nvme connect_q) when quiescing the tagset, introduce a QUEUE_FLAG_SKIP_TAGSET_QUIESCE flag to allow this new interface to ski quiescing a particular queue. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
Nothing in blk_mq_wait_quiesce_done needs the request_queue now, so just pass the tagset, and move the non-mq check into the only caller that needs it. Signed-off-by:
-
Christoph Hellwig authored
All I/O submissions have fairly similar latencies, and a tagset-wide quiesce is a fairly common operation. Signed-off-by:
-
Christoph Hellwig authored
For submit_bio based queues there is no (S)RCU critical section during I/O submission and thus nothing to wait for in blk_mq_wait_quiesce_done, so skip doing any synchronization. No non-mq driver should be calling this, but for now we have core callers that unconditionally call into it. Signed-off-by:
-
Christoph Hellwig authored
apple_nvme_reset_work schedules apple_nvme_remove, to be called, which will call apple_nvme_disable and unquiesce the I/O queues. Signed-off-by:
-
Christoph Hellwig authored
nvme_remove_dead_ctrl schedules nvme_remove to be called, which will call nvme_dev_disable and unquiesce the I/O queues. Signed-off-by:
-
Christoph Hellwig authored
nvme_kill_queues does two things: 1) mark the gendisk of all namespaces dead 2) unquiesce all I/O queues These used to be be intertwined due to block layer issues, but aren't any more. So move the unquiscing of the I/O queues into the callers, and rename the rest of the function to the now more descriptive nvme_mark_namespaces_dead. Signed-off-by:
-
Christoph Hellwig authored
None of the callers of nvme_kill_queues needs it to unquiesce the admin queues, as all of them already do it themselves: 1) nvme_reset_work explicit call nvme_start_admin_queue toward the beginning of the function. The extra call to nvme_start_admin_queue in nvme_reset_work this won't do anything as NVME_CTRL_ADMIN_Q_STOPPED will already be cleared. 2) nvme_remove calls nvme_dev_disable with shutdown flag set to true at the very beginning of the function if the PCIe device was not present, which is the precondition for the call to nvme_kill_queues. nvme_dev_disable already calls nvme_start_admin_queue toward the end of the function when the shutdown flag is set to true, so the admin queue is already enabled at this point. 3) nvme_remove_dead_ctrl schedules a workqueue to unbind the driver, which will end up in nvme_remove, which calls nvme_dev_disable with the shutdown flag. This case will call nvme_start_admin_queue a bit later than before. 4) apple_nvme_remove uses the same sequence as nvme_remove_dead_ctrl above. 5) nvme_remove_namespaces only calls nvme_kill_queues when the controller is in the DEAD state. That can only happen in the PCIe driver, and only from nvme_remove. See item 2) above for the conditions there. So it is safe to just remove the call to nvme_start_admin_queue in nvme_kill_queues without replacement. Signed-off-by: -
Christoph Hellwig authored
At the point where namespaces are marked dead, the controller is in a non-live state and we won't get pass the identify commands. Signed-off-by:
-
Christoph Hellwig authored
The NVME_NS_DEAD check only made sense when we revalidated namespaces in nvme_passthrough_end for commands that affected the namespace inventory. These days NVME_NS_DEAD is only set during reset or when tearing down namespaces, and we always remove all namespaces right after that. Signed-off-by:
-
Christoph Hellwig authored
The call to nvme_remove_invalid_namespaces made sense when nvme_passthru_end revalidated all namespaces and had to remove those that didn't exist any more. Since we don't revalidate from nvme_passthru_end now, this call is entirely spurious. Signed-off-by:
-
Christoph Hellwig authored
The code to create, update or delete a tagset and namespaces in nvme_reset_work is a bit convoluted. Refactor it with a two high-level conditionals for first probe vs reset and I/O queues vs no I/O queues to make the code flow more clear. Signed-off-by:
-
Christoph Hellwig authored
nvme and xen-blkfront are already doing this to stop buffered writes from creating dirty pages that can't be written out later. Move it to the common code. This also removes the comment about the ordering from nvme, as bd_mutex not only is gone entirely, but also hasn't been used for locking updates to the disk size long before that, and thus the ordering requirement documented there doesn't apply any more. Signed-off-by:
-
Yu Kuai authored
Prevent unnecessary format conversion for bfqg->bfqd in multiple places. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Paolo Valente <paolo.valente@unimore.it> Link: https://lore.kernel.org/r/20221102022542.3621219-6-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
Such code are not even compiled since they are inside marco "#if 0". Signed-off-by:
-
Yu Kuai authored
Just make the code a litter cleaner by removing the unnecessary variable 'sd'. Signed-off-by:
-
Yu Kuai authored
Current code is a bit ugly and hard to read. Signed-off-by:
-
Yu Kuai authored
After the patch "block, bfq: cleanup bfq_weights_tree add/remove apis"), the local variable 'bfqd' is not used anymore, thus remove it. Signed-off-by:
-
- 01 Nov, 2022 4 commits
-
-
Kemeng Shi authored
We only need a max queue depth for every iolatency to limit the inflight io number. Replace struct rq_depth with unsigned int to simplfy "struct iolatency_grp" and save memory. Signed-off-by:
Kemeng Shi <shikemeng@huawei.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20221018111240.22612-4-shikemeng@huawei.comSigned-off-by:
-
Kemeng Shi authored
Default queue depth of iolatency_grp is unlimited, so we scale down quickly(once by half) in scale_cookie_change. Remove the "subtract 1/16th" part which is not the truth and add the actual way we scale down. Signed-off-by:
-
Kemeng Shi authored
Function blkcg_iolatency_throttle will make sure blkg->parent is not NULL before calls check_scale_change. And function check_scale_change is only called in blkcg_iolatency_throttle. Signed-off-by:
-
Christoph Hellwig authored
Split an elevator_disable helper from elevator_switch for the case where we want to switch to no scheduler at all. This includes removing the pointless elevator_switch_mq helper and removing the switch to no schedule logic from blk_mq_init_sched. Signed-off-by:
-
