- 01 May, 2019 3 commits
-
-
Lokesh Vutla authored
TISCI abstracts the handling of IRQ routes where interrupt sources are not directly connected to host interrupt controller. Add support for the set of TISCI commands for requesting and releasing IRQs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Lokesh Vutla authored
TISCI provides support for getting the resources(IRQ, RING etc..) assigned to a specific device. These resources can be handled by the client and in turn sends TISCI cmd to configure the resources. It is very important that client should keep track on usage of these resources. Add support for TISCI commands to get resource ranges. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Grygorii Strashko authored
TISCI has been updated to have support for Resource management(like interrupts etc..). And there can be multiple device instances of a resource type in a SoC. So every driver corresponding to a resource type should get a TISCI handle so that it can make TISCI calls. And each DT node corresponding to a device should exist under its corresponding bus node as per the SoC architecture. But existing apis in TISCI library assumes that all TISCI users are child nodes of TISCI. Which is not true in the above case. So introduce (devm_)ti_sci_get_by_phandle() apis that can be used by TISCI users to get TISCI handle using of phandle property. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
- 29 Apr, 2019 13 commits
-
-
Geert Uytterhoeven authored
There is no need to print a message if devm_kzalloc() fails, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Geert Uytterhoeven authored
IRQ_DOMAIN_HIERARCHY selects IRQ_DOMAIN, hence there is no need for drivers to select both. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Rasmus Villemoes authored
Using list_add + list_sort to insert an element and keeping the list sorted is a somewhat blunt instrument; one can find the right place to insert in fewer lines of code than the cmp callback uses. Moreover, walking the entire list afterwards to merge adjacent ranges is overkill, since we know that only the just-inserted element may be merged with its neighbours. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Rasmus Villemoes authored
There's no reason to ask kmalloc() to zero the allocation, since all the fields get initialized immediately afterwards. Except that there's also not any reason to initialize the ->entry member, since the element gets added to the lpi_range_list immediately. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Rasmus Villemoes authored
There's no reason to do the allocation of the new lpi_range inside the lpi_range_lock. One could change the code to avoid the allocation altogether in case the freed range can be merged with one or two existing ranges (in which case the allocation would naturally be done under the lock), but it's probably not worth complicating the code for that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Fabien Dessenne authored
This irqchip driver uses the hwspinlock framework (coprocessor HW regs access concurrency) for the stm32mp1-exti device. Hence, this driver needs to handle the hwspinlock driver dependency using the deferred probe mechanism which requires to move this driver into a platform one with a probe() ops. This applies only for the device which is "st,stm32mp1-exti" compatible, the management of the other devices (st,stm32h7-exti / st,stm32-exti) is kept unchanged (use IRQCHIP_DECLARE) Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Sameer Pujar authored
If interrupts are enabled for a non-root GIC device that uses the gic-pm driver, when system suspend occurs, the current interrupt state is not saved and restored correctly and so interrupts do not work again on resuming the system. Add a late suspend handler to save and restore the state for these devices. Suggested-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Sameer Pujar authored
gic-pm driver is using pm-clk framework to manage clock resources, where clocks remain always ON. This happens on Tegra devices which use BPMP co-processor to manage the clocks. Calls to BPMP are always blocking and hence it is necessary to enable/disable clocks during prepare/unprepare phase respectively. When pm-clk is used, prepare count of clock is not balanced until pm_clk_remove() happens. Clock is prepared in the driver probe() and thus prepare count of clock remains non-zero, which in turn keeps clock ON always. Please note that above mentioned behavior is specific to Tegra devices using BPMP for clock management and this should not be seen on other devices. Though this patch uses clk_bulk APIs to address the mentioned behavior, this works fine for all devices. To simplify gic_get_clocks() API is removed and instead probe can do necessary setup. Suggested-by: Mohan Kumar D <mkumard@nvidia.com> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Julien Grall authored
The word 'number' has been misspelt in the comment on top of _irq_domain_alloc_irqs(). Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Anson Huang authored
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Julien Grall authored
The word 'entirely' has been misspelt in a comment in its_msi_prepare(). Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Hongbo Yao authored
Some definitions of Inner Cacheability attibutes need to be corrected. Fixes: 8c828a53 ("irqchip/gicv3-its: Restore all cacheability attributes") Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Florian Fainelli authored
It is useful to print which interrupt controllers are registered in the system and which parent IRQ they use, especially given that L2 interrupt controllers do not call request_irq() on their parent interrupt and do not appear under /proc/interrupts for that reason. We used to print the base register address virtual address which had little value, use %pOF to print the path to the Device Tree node which maps to the physical address more easily and is what people need to troubleshoot systems. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
- 14 Apr, 2019 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge page ref overflow branch. Jann Horn reported that he can overflow the page ref count with sufficient memory (and a filesystem that is intentionally extremely slow). Admittedly it's not exactly easy. To have more than four billion references to a page requires a minimum of 32GB of kernel memory just for the pointers to the pages, much less any metadata to keep track of those pointers. Jann needed a total of 140GB of memory and a specially crafted filesystem that leaves all reads pending (in order to not ever free the page references and just keep adding more). Still, we have a fairly straightforward way to limit the two obvious user-controllable sources of page references: direct-IO like page references gotten through get_user_pages(), and the splice pipe page duplication. So let's just do that. * branch page-refs: fs: prevent page refcount overflow in pipe_buf_get mm: prevent get_user_pages() from overflowing page refcount mm: add 'try_get_page()' helper function mm: make page ref count overflow check tighter and more explicit
-
Matthew Wilcox authored
Change pipe_buf_get() to return a bool indicating whether it succeeded in raising the refcount of the page (if the thing in the pipe is a page). This removes another mechanism for overflowing the page refcount. All callers converted to handle a failure. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
If the page refcount wraps around past zero, it will be freed while there are still four billion references to it. One of the possible avenues for an attacker to try to make this happen is by doing direct IO on a page multiple times. This patch makes get_user_pages() refuse to take a new page reference if there are already more than two billion references to the page. Reported-by: Jann Horn <jannh@google.com> Acked-by: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the same as the traditional 'get_page()' function, but instead of unconditionally incrementing the reference count of the page, it only does so if the count was "safe". It returns whether the reference count was incremented (and is marked __must_check, since the caller obviously has to be aware of it). Also like 'get_page()', you can't use this function unless you already had a reference to the page. The intent is that you can use this exactly like get_page(), but in situations where you want to limit the maximum reference count. The code currently does an unconditional WARN_ON_ONCE() if we ever hit the reference count issues (either zero or negative), as a notification that the conditional non-increment actually happened. NOTE! The count access for the "safety" check is inherently racy, but that doesn't matter since the buffer we use is basically half the range of the reference count (ie we look at the sign of the count). Acked-by: Matthew Wilcox <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We have a VM_BUG_ON() to check that the page reference count doesn't underflow (or get close to overflow) by checking the sign of the count. That's all fine, but we actually want to allow people to use a "get page ref unless it's already very high" helper function, and we want that one to use the sign of the page ref (without triggering this VM_BUG_ON). Change the VM_BUG_ON to only check for small underflows (or _very_ close to overflowing), and ignore overflows which have strayed into negative territory. Acked-by: Matthew Wilcox <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 13 Apr, 2019 14 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Set of fixes that should go into this round. This pull is larger than I'd like at this time, but there's really no specific reason for that. Some are fixes for issues that went into this merge window, others are not. Anyway, this contains: - Hardware queue limiting for virtio-blk/scsi (Dongli) - Multi-page bvec fixes for lightnvm pblk - Multi-bio dio error fix (Jason) - Remove the cache hint from the io_uring tool side, since we didn't move forward with that (me) - Make io_uring SETUP_SQPOLL root restricted (me) - Fix leak of page in error handling for pc requests (Jérôme) - Fix BFQ regression introduced in this merge window (Paolo) - Fix break logic for bio segment iteration (Ming) - Fix NVMe cancel request error handling (Ming) - NVMe pull request with two fixes (Christoph): - fix the initial CSN for nvme-fc (James) - handle log page offsets properly in the target (Keith)" * tag 'for-linus-20190412' of git://git.kernel.dk/linux-block: block: fix the return errno for direct IO nvmet: fix discover log page when offsets are used nvme-fc: correct csn initialization and increments on error block: do not leak memory in bio_copy_user_iov() lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs nvme: cancel request synchronously blk-mq: introduce blk_mq_complete_request_sync() scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids virtio-blk: limit number of hw queues by nr_cpu_ids block, bfq: fix use after free in bfq_bfqq_expire io_uring: restrict IORING_SETUP_SQPOLL to root tools/io_uring: remove IOCQE_FLAG_CACHEHIT block: don't use for-inside-for in bio_for_each_segment_all
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fix: - Fix a deadlock in close() due to incorrect draining of RDMA queues Bugfixes: - Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping" as it is causing stack overflows - Fix a regression where NFSv4 getacl and fs_locations stopped working - Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family. - Fix xfstests failures due to incorrect copy_file_range() return values" * tag 'nfs-for-5.1-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping" NFSv4.1 fix incorrect return value in copy_file_range xprtrdma: Fix helper that drains the transport NFS: Fix handling of reply page vector NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "One obvious fix for a ciostor data corruption on error bug" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Here's more than a handful of clk driver fixes for changes that came in during the merge window: - Fix the AT91 sama5d2 programmable clk prescaler formula - A bunch of Amlogic meson clk driver fixes for the VPU clks - A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc clks as critical only when really needed - Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate implementation - Use the right structure to test for a frequency table in i.MX's PLL_1416x driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx: Fix PLL_1416X not rounding rates clk: mediatek: fix clk-gate flag setting platform/x86: pmc_atom: Drop __initconst on dmi table clk: x86: Add system specific quirk to mark clocks as critical clk: meson: vid-pll-div: remove warning and return 0 on invalid config clk: meson: pll: fix rounding and setting a rate that matches precisely clk: meson-g12a: fix VPU clock parents clk: meson: g12a: fix VPU clock muxes mask clk: meson-gxbb: round the vdec dividers to closest clk: at91: fix programmable clock for sama5d2
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - Add a DMA alias quirk for another Marvell SATA device (Andre Przywara) - Fix a pciehp regression that broke safe removal of devices (Sergey Miroshnichenko) * tag 'pci-v5.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: pciehp: Ignore Link State Changes after powering off a slot PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "A minor build fix for 64-bit FLATMEM configs. A fix for a boot failure on 32-bit powermacs. My commit to fix CLOCK_MONOTONIC across Y2038 broke the 32-bit VDSO on 64-bit kernels, ie. compat mode, which is only used on big endian. The rewrite of the SLB code we merged in 4.20 missed the fact that the 0x380 exception is also used with the Radix MMU to report out of range accesses. This could lead to an oops if userspace tried to read from addresses outside the user or kernel range. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Larry Finger, Nicholas Piggin" * tag 'powerpc-5.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Define MAX_PHYSMEM_BITS for all 64-bit configs powerpc/64s/radix: Fix radix segment exception handling powerpc/vdso32: fix CLOCK_MONOTONIC on PPC64 powerpc/32: Fix early boot failure with RTAS built-in
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "The main thing is a fix to our FUTEX_WAKE_OP implementation which was unbelievably broken, but did actually work for the one scenario that GLIBC used to use. Summary: - Fix stack unwinding so we ignore user stacks - Fix ftrace module PLT trampoline initialisation checks - Fix terminally broken implementation of FUTEX_WAKE_OP atomics" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value arm64: backtrace: Don't bother trying to unwind the userspace stack arm64/ftrace: fix inadvertent BUG() in trampoline check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Fix typos in user-visible resctrl parameters, and also fix assembly constraint bugs that might result in miscompilation" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Use stricter assembly constraints in bitops x86/resctrl: Fix typos in the mba_sc mount option
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "Fix the alarm_timer_remaining() return value" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Return correct remaining time
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a NULL pointer dereference crash in certain environments" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Do not re-read ->h_load_next during hierarchical load calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Six kernel side fixes: three related to NMI handling on AMD systems, a race fix, a kexec initialization fix and a PEBS sampling fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix perf_event_disable_inatomic() race x86/perf/amd: Remove need to check "running" bit in NMI handler x86/perf/amd: Resolve NMI latency issues for active PMCs x86/perf/amd: Resolve race condition when disabling PMC perf/x86/intel: Initialize TFA MSR perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Ingo Molnar: "Fixes a crash when accessing /proc/lockdep" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Zap lock classes even with lock debugging disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Two genirq fixes, plus an irqchip driver error handling fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent() genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Ingo Molnar: "Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion bug" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Add rewind_stack_do_exit() to the noreturn list linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
-
- 12 Apr, 2019 4 commits
-
-
Leonard Crestez authored
Code which initializes the "clk_init_data.ops" checks pll->rate_table before that field is ever assigned to so it always picks "clk_pll1416x_min_ops". This breaks dynamic rate rounding for features such as cpufreq. Fix by checking pll_clk->rate_table instead, here pll_clk refers to the constant initialization data coming from per-soc clk driver. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Fixes: 8646d4dc ("clk: imx: Add PLLs driver for imx8mm soc") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Weiyi Lu authored
CLK_SET_RATE_PARENT would be dropped. Merge two flag setting together to correct the error. Fixes: 5a1cc4c2 ("clk: mediatek: Add flags to mtk_gate") Cc: <stable@vger.kernel.org> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix a sparc64 sun4v_pci regression introduced in this merged window, and a dma-debug stracktrace regression from the big refactor last merge window" * tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: only skip one stackframe entry sparc64/pci_sun4v: fix ATU checks for large DMA masks
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "Fix an AMD IOMMU issue where the driver didn't correctly setup the exclusion range in the hardware registers, resulting in exclusion ranges being one page too big. This can cause data corruption of the address of that last page is used by DMA operations" * tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Set exclusion range correctly
-