- 05 Jun, 2021 4 commits
-
-
Takashi Sakamoto authored
In the workqueue to queue wake-up event, isochronous context is not processed, thus it's useless to check context for the workqueue to switch status of runtime for PCM substream to XRUN. On the other hand, in software IRQ context of 1394 OHCI, it's needed. This commit fixes the bug introduced when tasklet was replaced with workqueue. Cc: <stable@vger.kernel.org> Fixes: 2b3d2987 ("ALSA: firewire: Replace tasklet with work") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20210605091054.68866-1-o-takashi@sakamocchi.jpSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jeremy Szu authored
The HP EliteBook 840 Aero G8 using ALC285 codec which using 0x04 to control mute LED and 0x01 to control micmute LED. In the other hand, there is no output from right channel of speaker. Therefore, add a quirk to make it works. Signed-off-by:
Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210605082539.41797-3-jeremy.szu@canonical.comSigned-off-by:
-
Jeremy Szu authored
The HP EliteBook x360 1040 G8 using ALC285 codec which using 0x04 to control mute LED and 0x01 to control micmute LED. In the other hand, there is no output from right channel of speaker. Therefore, add a quirk to make it works. Signed-off-by:
-
Jeremy Szu authored
The HP Elite Dragonfly G2 using ALC285 codec which using 0x04 to control mute LED and 0x01 to control micmute LED. In the other hand, there is no output from right channel of speaker. Therefore, add a quirk to make it works. Signed-off-by:
-
- 03 Jun, 2021 2 commits
-
-
Hui Wang authored
The patch_realtek.c needs to check if the power_state.event equals PM_EVENT_SUSPEND, after using the direct-complete, the suspend() and resume() will be skipped if the codec is already rt_suspended, in this case, the patch_realtek.c will always get PM_EVENT_ON even the system is really resumed from S3. We could set power_state to PMSG_SUSPEND in the prepare(), if other PM functions are called before complete(), those functions will override power_state; if no other PM functions are called before complete(), we could know the suspend() and resume() are skipped since only S3 pm functions could be skipped by direct-complete, in this case set power_state to PMSG_RESUME in the complete(). This could guarantee the first time of calling hda_codec_runtime_resume() after complete() has the correct power_state. Fixes: 215a22ed ("ALSA: hda: Refactor codec PM to use direct-complete optimization") Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210602145424.3132-1-hui.wang@canonical.comSigned-off-by:
-
Takashi Iwai authored
snd_timer_notify1() calls the notification to each slave for a master event, but it passes a wrong event number. It should be +10 offset, corresponding to SNDRV_TIMER_EVENT_MXXX, but it's incorrectly with +100 offset. Casually this was spotted by UBSAN check via syzkaller. Reported-by: syzbot+d102fa5b35335a7e544e@syzkaller.appspotmail.com Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000e5560e05c3bd1d63@google.com Link: https://lore.kernel.org/r/20210602113823.23777-1-tiwai@suse.deSigned-off-by:
-
- 02 Jun, 2021 1 commit
-
-
Dongliang Mu authored
The snd_ctl_led_sysfs_add and snd_ctl_led_sysfs_remove should contain the refcount operations in pair. However, snd_ctl_led_sysfs_remove fails to decrease the refcount to zero, which causes device_release never to be invoked. This leads to memory leak to some resources, like struct device_private. In addition, we also free some other similar memory leaks in snd_ctl_led_init/snd_ctl_led_exit. Fix this by replacing device_del to device_unregister in snd_ctl_led_sysfs_remove/snd_ctl_led_init/snd_ctl_led_exit. Note that, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device will call kobject_release and delay the release of kobject, which will cause use-after-free when the memory backing the kobject is freed at once. Reported-by: syzbot+08a7d8b51ea048a74ffb@syzkaller.appspotmail.com Fixes: a135dfb5 ("ALSA: led control - add sysfs kcontrol LED marking layer") Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- 01 Jun, 2021 2 commits
-
-
Carlos M authored
For the HP Pavilion 15-CK0xx, with audio subsystem ID 0x103c:0x841c, adding a line in patch_realtek.c to apply the ALC269_FIXUP_HP_MUTE_LED_MIC3 fix activates the mute key LED. Signed-off-by:
Carlos M <carlos.marr.pz@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210531202026.35427-1-carlos.marr.pz@gmail.comSigned-off-by:
-
Stefan Binding authored
Previously this fix was applied only to Bullseye variant laptops, and should be applied to Cyborg and Warlock variants. Fixes: 45b14fe2 ("ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye") Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Signed-off-by:
Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210531163754.136736-1-vitalyr@opensource.cirrus.comSigned-off-by:
-
- 31 May, 2021 1 commit
-
-
Takashi Iwai authored
The recent commit to drop the HDA-specific mute-LED control, e65bf997 ("ALSA: HDA - remove the custom implementation for the audio LED trigger"), caused a regression on the mixer element read for "Capture Switch" when it's built from bind controls. The function create_bind_cap_vol_ctl() creates the snd_kcontrol_new object directly via snd_hda_gen_add_kctl() instead of add_control(). Although the commit above added a workaround for the SNDRV_CTL_ACCESS_READWRITE in add_control() as default, this code path fell out from the radar. As a result, now the driver gives -EPERM error because of the lack of the proper access bit at reading "Capture Switch" element value. Fix the regression by setting the access bit properly. Fixes: e65bf997 ("ALSA: HDA - remove the custom implementation for the audio LED trigger") BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1186634 Link: https://lore.kernel.org/r/20210531180633.27831-1-tiwai@suse.deSigned-off-by:
-
- 30 May, 2021 1 commit
-
-
Kai Vehmanen authored
Add HD Audio PCI ID for Intel AlderLake-M. Add rules to snd_intel_dsp_find_config() to choose SOF driver for ADL-M systems with PCH-DMIC or Soundwire codecs, and legacy driver for the rest. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210528185123.48332-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
- 27 May, 2021 4 commits
-
-
Jeremy Szu authored
The HP ZBook Studio 17.3 Inch G8 is using ALC285 codec which is using 0x04 to control mute LED and 0x01 to control micmute LED. In the other hand, there is no output from right channel of speaker. Therefore, add a quirk to make it works. Signed-off-by:
-
Jeremy Szu authored
The HP ZBook Fury 15.6 Inch G8 is using ALC285 codec which is using 0x04 to control mute LED and 0x01 to control micmute LED. In the other hand, there is no output from right channel of speaker. Therefore, add a quirk to make it works. Signed-off-by:
-
Jeremy Szu authored
The HP ZBook Studio 15.6 Inch G8 is using ALC285 codec which is using 0x04 to control mute LED and 0x01 to control micmute LED. In the other hand, there is no output from right channel of speaker. Therefore, add a quirk to make it works. Signed-off-by:
-
Jeremy Szu authored
The HP EliteBook 855 G8 Notebook PC is using ALC285 codec which needs ALC285_FIXUP_HP_MUTE_LED fixup to make it works. After applying the fixup, the mute/micmute LEDs work good. Signed-off-by:
-
- 25 May, 2021 2 commits
-
-
Peter Ujfalusi authored
Lenovo ThinkStation P340 uses ALC623 codec (SSID 17aa:1048) and it produces bug plock/pop noise over line out (green jack on the back) which can be fixed by applying ALC269_FIXUP_NO_SHUTUP tot he machine. Convert the existing entry for the same SSID to chain to apply this fixup as well. Suggested-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210524203726.2278-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.13 A collection of fixes that have come in since the merge window, mainly device specific things. The fixes to the generic cards from Morimoto-san are handling regressions that were introduced in the merge window on at least the Kontron sl28-var3-ads2.
-
- 23 May, 2021 1 commit
-
-
kernel test robot authored
sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static? Fixes: 265d1a90 ("ALSA: usb-audio: scarlett2: Improve driver startup messages") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 22 May, 2021 2 commits
-
-
Hui Wang authored
The Lenovo Yoga 9i has bass speaker, but the bass speaker can't work, that is because there is an i2s amplifier on that speaker, need to run ideapad_s740_coef() to initialize the amplifier. And also needs to apply ALC285_FIXUP_THINKPAD_HEADSET_JACK to rename the speaker's mixer control name, otherwise the PA can't handle them. BugLink: http://bugs.launchpad.net/bugs/1926165Signed-off-by:
-
Hui Wang authored
On some ASUS and MSI machines, the audio codec is alc1220 and the Headphone is connected to audio mixer 0xf and DAC 0x5, in theory the Headphone volume is controlled by DAC 0x5 (Heapdhone Playback Volume), but somehow it is controlled by DAC 0x2 (Front Playback Volume), maybe this is a defect on the codec alc1220. Because of this issue, the PA couldn't switch the headphone and Lineout correctly, If we apply the quirk CLEVO_P950 to those machines, the Lineout and Headphone will share the audio mixer 0xc and DAC 0x2, and generate Headphone+LO mixer, then PA could handle them when switching between them. BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1206 Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 21 May, 2021 4 commits
-
-
Geoffrey D. Bennett authored
Add separate init function to call the existing controls_create function so a custom error can be displayed if initialisation fails. Use info level instead of error for notifications. Display the VID/PID so device_setup is targeted to the right device. Display "enabled" message to easily confirm that the driver is loaded. Signed-off-by:
Geoffrey D. Bennett <g@b4.vu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/b5d140c65f640faf2427e085fbbc0297b32e5fce.1621584566.git.g@b4.vuSigned-off-by:
-
Geoffrey D. Bennett authored
Use usb_rcvctrlpipe() not usb_sndctrlpipe() for USB control input in the Scarlett Gen 2 mixer driver. This fixes the device hang during initialisation when used with the ehci-pci host driver. Fixes: 9e4d5c1b ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Signed-off-by:
-
Johan Hovold authored
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the UAC2_CS_CUR request which erroneously used usb_sndctrlpipe(). Fixes: 93db51d0 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3") Cc: stable@vger.kernel.org # 5.10 Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210521133742.18098-1-johan@kernel.orgSigned-off-by:
-
Stephen Boyd authored
This driver spits out a warning for me at boot: sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2 but it looks like it is all an optional clk. Use the optional clk APIs here so that we don't see this message and everything else is the same. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Fixes: 3e53ac82 ("ASoC: qcom: make osr clock optional") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 20 May, 2021 1 commit
-
-
Dan Carpenter authored
This error path returns zero (success) but it should return -EINVAL. Fixes: 3333cb71 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwandaSigned-off-by:
-
- 19 May, 2021 2 commits
-
-
Takashi Iwai authored
The initialization of MIDI devices that are found on some LINE6 drivers are currently done in a racy way; namely, the MIDI buffer instance is allocated and initialized in each private_init callback while the communication with the interface is already started via line6_init_cap_control() call before that point. This may lead to Oops in line6_data_received() when a spurious event is received, as reported by syzkaller. This patch moves the MIDI initialization to line6_init_cap_control() as well instead of the too-lately-called private_init for avoiding the race. Also this reduces slightly more lines, so it's a win-win change. Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.deSigned-off-by:
-
Ranjani Sridharan authored
BE hw_params op was recently added for SSP type DAIs. But sending the DAI_CONFIG IPC during hw_params is not supported with older firmware. So add an ABI check to avoid sending the IPC if the firmware ABI is older than 3.18. Fixes: e12be9fb ('ASoC: SOF: Intel: HDA: add hw params callback for SSP DAIs') Tested-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
-
- 18 May, 2021 3 commits
-
-
Arnd Bergmann authored
Kconfig produces a warning with SND_SOC_FSL_RPMSG=y and SND_IMX_SOC=m: WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m] && RPMSG [=y] Selected by [y]: - SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && SND_IMX_SOC [=m]!=n Add a dependency to prevent this configuration. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20210514213118.630427-1-arnd@kernel.orgSigned-off-by:
-
Takashi Sakamoto authored
At high sampling transfer frequency, TC Electronic Konnekt Live transfers/receives 6 audio data frames in multi bit linear audio data channel of data block in CIP payload. Current hard-coded stream format is wrong. Cc: <stable@vger.kernel.org> Fixes: f1f0f330 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic") Signed-off-by:
-
Takashi Sakamoto authored
ALSA dice driver detects jumbo payload at high sampling transfer frequency for below models: * Avid M-Box 3 Pro * M-Audio Profire 610 * M-Audio Profire 2626 Although many DICE-based devices have a quirk at high sampling transfer frequency to multiplex double number of PCM frames into data block than the number in IEC 61883-1/6, the above devices are just compliant to IEC 61883-1/6. This commit disables the mode of double_pcm_frames for the models. Signed-off-by:
-
- 16 May, 2021 1 commit
-
-
Takashi Iwai authored
The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever the hardware sets the corresponding status bit for each stream. This works fine for most cases as long as the hardware behaves properly. But when the hardware gives a wrong bit set, this leads to a zero- division Oops, and reportedly, this seems what happened on a VM. For fixing the crash, this patch adds a internal flag indicating that the stream is ready to be updated, and check it (as well as the flag being in suspended) to ignore such spurious update. Cc: <stable@vger.kernel.org> Reported-and-tested-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.deSigned-off-by:
-
- 14 May, 2021 6 commits
-
-
PeiSen Hou authored
Fix "use as headset mic, without its own jack detect" problen. Signed-off-by:
PeiSen Hou <pshou@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/d0746eaf29f248a5acc30313e3ba4f99@realtek.comSigned-off-by:
-
Takashi Sakamoto authored
The snd_firewire_lib:amdtp_packet tracepoints event includes index of packet processed in a context handling. However in IR context, it is not calculated as expected. Cc: <stable@vger.kernel.org> Fixes: 753e7179 ("ALSA: firewire-lib: use packet descriptor for IR context") Signed-off-by:
-
Takashi Sakamoto authored
The quadlets for CIP header is handled as a part of IR context header, thus it doesn't join in IR context payload. However current calculation includes the quadlets in IR context payload. Cc: <stable@vger.kernel.org> Fixes: f11453c7 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header") Signed-off-by:
-
Takashi Sakamoto authored
The check for size of isochronous packet payload just cares of the size of IR context payload without the size of CIP header. Cc: <stable@vger.kernel.org> Fixes: f11453c7 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header") Signed-off-by:
-
Takashi Sakamoto authored
Mackie d.2 has an extension card for IEEE 1394 communication, which uses BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in function for IEEE 1394 communication by Oxford Semiconductor OXFW971, according to schematic diagram available in Mackie website. Although I misunderstood that Mackie d.2 Pro would be also a model with OXFW971, it's wrong. Mackie d.2 Pro is a model which includes the extension card as factory settings. This commit fixes entries in Kconfig and comment in ALSA OXFW driver. Cc: <stable@vger.kernel.org> Fixes: fd6f4b0d ("ALSA: bebob: Add skelton for BeBoB based devices") Fixes: ec4dba50 ("ALSA: oxfw: Add support for Behringer/Mackie devices") Signed-off-by:
-
Takashi Sakamoto authored
Alesis iO 26 FireWire has two pairs of digital optical interface. It delivers PCM frames from the interfaces by second isochronous packet streaming. Although both of the interfaces are available at 44.1/48.0 kHz, first one of them is only available at 88.2/96.0 kHz. It reduces the number of PCM samples to 4 in Multi Bit Linear Audio data channel of data blocks on the second isochronous packet streaming. This commit fixes hardcoded stream formats. Cc: <stable@vger.kernel.org> Fixes: 28b208f6 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Signed-off-by:
-
- 12 May, 2021 3 commits
-
-
Charles Keepax authored
Fixup a needlessly initialised variable and an unchecked return value. Reported-by:
-
Charles Keepax authored
This device requires single register transactions, this will definely cause problems with the new device ID parsing which uses regmap_bulk_read but might also show up in the cache sync sometimes. Add the missing flags to the regmap_config. Fixes: 283160f1 ("ASoC: cs35l32: Minor error paths fixups") Signed-off-by:
-
Charles Keepax authored
This device requires single register transactions, this will definely cause problems with the new device ID parsing which uses regmap_bulk_read but might also show up in the cache sync sometimes. Add the missing flags to the regmap_config. Fixes: 8cb9b001 ("ASoC: cs35l34: Minor error paths fixups") Signed-off-by:
-
