Current SOF implementation limits period and buffer sizes to multiples
of period_min. Period_min is defined in topology, but is in practise set
to align with the SOF DSP timer tick (typically 1ms).

While this approach helps user-space to avoid period sizes, which are
not aligned to the DSP timer tick, it causes problems to applications
which want to align data processing size to that of ALSA period size.
One example is JACK audio server, which limits period sizes to power of
two values.

Other ALSA drivers where audio data transfer is driven by a timer tick,
like USB, do not constraint period and buffer sizes to exact multiple of
the timer tick.

To align SOF to follow the same behaviour, drop the additional alignment
constraints. As a side-effect, this patch can cause irregularity to
period wakeup timing. This happens when application chooses settings
which were previously forbidden. For example, if application configures
period size to 2^14 bytes and audio config of S32_LE/2ch/48000Hz, one
period represents 42.667ms of audio. Without this patch, this
configuration is not allowed by SOF. With the patch applied,
configuration is allowed but the wakeups are paced by the DSP timer
tick, which is typically 1ms. Application will see period wakeups with a
42/43/42/43ms repeating pattern.

Both approaches are valid within ALSA context, but relaxing the
constraints is better aligned with existing applications and other ALSA
drivers like USB audio.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201118140545.2138895-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Select WANT_DEV_COREDUMP for catpt driver.
Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com>
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>

--
Changes in v2:
 - change should be added to catpt only
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201117145223.21222-1-gustaw.lewandowski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

On VF610, mclk0 = bus_clk;
On i.MX6SX/6UL/6ULL/7D, mclk0 = mclk1;
On i.MX7ULP, mclk0 = bus_clk;
On i.MX8QM/8QXP, mclk0 = bus_clk;
On i.MX8MQ/8MN/8MM/8MP, mclk0 = bus_clk;

So add variable mclk0_is_mclk1 in fsl_sai_soc_data to
distinguish these platforms.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1605768038-4582-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

COMMON_CLK is a user-selectable option with its own dependencies.  The
most important dependency is !HAVE_LEGACY_CLK.  User-selectable drivers
should not select COMMON_CLK because they will create a dependency cycle
and build failures.  For example on MIPS a configuration with COMMON_CLK
(selected by SND_SUN8I_CODEC) and HAVE_LEGACY_CLK (selected by
SOC_RT305X) is possible:

  WARNING: unmet direct dependencies detected for COMMON_CLK
    Depends on [n]: !HAVE_LEGACY_CLK [=y]
    Selected by [y]:
    - SND_SUN8I_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
      (ARCH_SUNXI || COMPILE_TEST [=y]) && OF [=y] && (MACH_SUN8I || ARM64 && ARCH_SUNXI || COMPILE_TEST [=y])

    /usr/bin/mips-linux-gnu-ld: drivers/clk/clk.o: in function `clk_set_rate':
    (.text+0xaeb4): multiple definition of `clk_set_rate'; arch/mips/ralink/clk.o:(.text+0x88): first defined here
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201118201420.4878-1-krzk@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: soc-component: add snd_soc_component_xxx()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

These are v2 of snd_soc_component_compr_xxx() function patches.
I think component related function should be implemented at
soc-component.c, otherwise it is confusable to read.
These are for it.

v1 -> v2
	- fixup function return timing on
		snd_soc_component_compr_get_params()
		snd_soc_component_compr_get_metadata()

	- use mutex at compr side on
		snd_soc_component_compr_get_caps()
		snd_soc_component_compr_get_codec_caps()
		snd_soc_component_compr_copy()

Link: https://lore.kernel.org/r/878sb78ac4.wl-kuninori.morimoto.gx@renesas.com

Kuninori Morimoto (12):
  ASoC: soc-component: add snd_soc_component_compr_open()
  ASoC: soc-component: add snd_soc_component_compr_free()
  ASoC: soc-component: add snd_soc_component_compr_trigger()
  ASoC: soc-component: add snd_soc_component_compr_set_params()
  ASoC: soc-component: add snd_soc_component_compr_get_params()
  ASoC: soc-component: add snd_soc_component_compr_get_caps()
  ASoC: soc-component: add snd_soc_component_compr_get_codec_caps()
  ASoC: soc-component: add snd_soc_component_compr_ack()
  ASoC: soc-component: add snd_soc_component_compr_pointer()
  ASoC: soc-component: add snd_soc_component_compr_copy()
  ASoC: soc-component: add snd_soc_component_compr_set_metadata()
  ASoC: soc-component: add snd_soc_component_compr_get_metadata()

 include/sound/soc-component.h |  22 +++
 sound/soc/soc-component.c     | 255 ++++++++++++++++++++++++++++++++
 sound/soc/soc-compress.c      | 263 ++++------------------------------
 3 files changed, 303 insertions(+), 237 deletions(-)

--
2.25.1

This series updates Sameer's patch to repartition the graph card binding
schema and incorporate the OF graph schema. The schema was also mixing
card node and DAI node properties, so I've split the DAI part (the
'port' node) into a separate schema.

There's another problem that 'frame-master' and 'bitclock-master' have
inconsistent types of boolean and phandle. Having the properties just
point to the local or remote endpoint within an endpoint node is kind of
pointless. We should have gone with just boolean, but looks like we
already have several users. MMP OLPC is the one platform using boolean,
but it happens to work because the properties are effectively ignored
and CPU DAI as the master is the default.

Rob

Rob Herring (3):
  ASoC: dt-bindings: Use OF graph schema
  ASoC: dt-bindings: marvell,mmp-sspa: Use audio-graph-port schema
  ASoC: dt-bindings: Refine 'frame-master' and 'bitclock-master' type

Sameer Pujar (1):
  ASoC: audio-graph-card: Refactor schema

 .../bindings/sound/audio-graph-card.yaml      | 106 +-----------------
 .../bindings/sound/audio-graph-port.yaml      |  72 ++++++++++++
 .../bindings/sound/audio-graph.yaml           |  45 ++++++++
 .../bindings/sound/marvell,mmp-sspa.yaml      |  25 +----
 .../bindings/sound/renesas,rsnd.yaml          |  12 +-
 .../bindings/sound/simple-card.yaml           |   6 +-
 6 files changed, 132 insertions(+), 134 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-port.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/audio-graph.yaml

base-commit: e2e99930ec006c6fe1d62af339a765ade71a0d9a
--
2.25.1

This reverts commit 1afc60e0
(dt-bindings: mediatek: mt8192: add audio afe document).

 https://mailman.alsa-project.org/pipermail/alsa-devel/2020-November/176873.html
 These dependency are continuing to upstream, I will revert this patch first.
 After the dependencies are merged, I will send 'mt8192-afe-pcm.yaml' again.

[Massaged commit message to put hint about issue being fixed into there
rather than the trailer -- broonie]
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1605081920-11848-1-git-send-email-jiaxin.yu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

./sound/soc/samsung/midas_wm1811.c:534:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1605529740-68757-1-git-send-email-zou_wei@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The transmit phase register value is never cleared during hw params.
So once hw params sets this bit to handle a two channel format, it
remains configured for dual-phase, which is not desirable for mono
playback.
Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Link: https://lore.kernel.org/r/20201106145905.365903-1-bkylerussell@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The '>=' expression itself is bool, no need to convert it to bool.
Fix the following coccicheck warning:

./sound/soc/codecs/wcd9335.c:3982:25-30: WARNING: conversion to bool not needed here
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1604652816-1330-1-git-send-email-kaixuxia@tencent.comSigned-off-by: Mark Brown <broonie@kernel.org>

'frame-master' and 'bitclock-master' are only a single phandle, so use
the more specific 'phandle' type definition instead.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20201117013349.2458416-5-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Now that we have a graph schema, reference it from the marvell,mmp-sspa
schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20201117013349.2458416-4-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

There can be customized sound cards which are based on generic audio
graph. In such cases most of the stuff is reused from generic audio
graph. To facilitate this, refactor audio graph schema into multiple
files and the base schema can be reused for specific sound cards.

The graph card nodes and port nodes are separate entities, so they
should be separate schemas.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[robh: Split out port schema. Add graph.yaml in subsequent commit]
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20201117013349.2458416-2-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zh3l6gl8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_set_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rgx7v5t.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_copy().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87361d7v5z.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_pointer().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874klt7v65.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_ack().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875z697v6c.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_codec_caps().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877dqp7v6i.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_caps().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878sb57v6q.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a6vl7v6x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_set_params()
to soc-component as snd_soc_component_compr_set_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87blg17v74.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_trigger()
to soc-component as snd_soc_component_compr_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87d00h7v7k.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_free()
to soc-component as snd_soc_component_compr_free().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eekx7v7r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

component related function should be implemented at
soc-component.c.
This patch moves soc-compress soc_compr_components_open()
to soc-component as snd_soc_component_compr_open().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ft5d7v7x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some entries used 7 or 8 spaces instead if a single TAB.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20201110174904.3413846-1-geert@linux-m68k.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The Intel Keem Bay audio module is only present on Intel Keem Bay SoCs.
Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about
this driver when configuring a kernel without Intel Keem Bay platform
support.

Fixes: c544912b ("ASoC: Intel: Add makefiles and kconfig changes for KeemBay")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201110145001.3280479-1-geert+renesas@glider.beSigned-off-by: Mark Brown <broonie@kernel.org>

The Freescale/NXP AUDIO TO HDMI TX module is only present on NXP i.MX 8
Series SoCs.  Hence add a dependency on ARCH_MXC, to prevent asking the
user about this driver when configuring a kernel without i.MX 8 platform
support.

Fixes: 8a24c834 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201110145120.3280658-1-geert+renesas@glider.beSigned-off-by: Mark Brown <broonie@kernel.org>

Audio ADI reference designs are also used on some ZynqMP boards, and can
also be used on Intel FPGA boards and also on some more complex FPGA
combinations (FPGA cards connected through PCIe).

This change removes the dependency on Microblaze and Zynq architectures
to allow the usage of this driver for the systems described above.
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201110152213.37811-1-alexandru.ardelean@analog.comSigned-off-by: Mark Brown <broonie@kernel.org>

This change converts the old device-tree binding for ADAU1977 from text
format to the new yaml format.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201110084754.46756-1-alexandru.ardelean@analog.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: catpt: Offload fixes and code optimization" from Cezary Rojewski <cezary.rojewski@intel.com>:

First two of the series address bugs connected mainly to offload streams:
- scenarios with very low buffer sizes: RESET_STREAM IPC timeouts
- fix lp clock selection when switching between PAUSE <-> RESUME states:
  glitches on first offload when no additional stream is opened
  simultaneously

Follow ups are: code reduction and optimization oriented patches.
This has been foretold in:

[PATCH v10 00/14] ASoC: Intel: Catpt - Lynx and Wildcat point
https://www.spinics.net/lists/alsa-devel/msg116440.html
  Note: LPT power up/down sequences might get aligned with WPT once
  enough testing is done as capabilities are shared for both DSPs.

First, optimize applying of user settings - prevent redundand calls from
happening - and then as mentioned above, streamline power on/off sequence
for LPT and WPT.

Cezary Rojewski (5):
  ASoC: Intel: catpt: Skip position update for unprepared streams
  ASoC: Intel: catpt: Correct clock selection for dai trigger
  ASoC: Intel: catpt: Optimize applying user settings
  ASoC: Intel: catpt: Streamline power routines across LPT and WPT
  ASoC: Intel: catpt: Cleanup after power routines streamlining

 sound/soc/intel/catpt/core.h   |  10 ++-
 sound/soc/intel/catpt/device.c |  18 +++---
 sound/soc/intel/catpt/dsp.c    |  56 ++--------------
 sound/soc/intel/catpt/pcm.c    | 113 ++++++++++++++++-----------------
 4 files changed, 74 insertions(+), 123 deletions(-)

--
2.17.1

base-commit: 3650b228

Merge series "ASoC: pcm512x: Patch series to set fmt from `set_fmt()`" from Kirill Marinushkin <kmarinushkin@birdec.com>:

Set format from `set_fmt()` func instead of `hw_params()`, plus supportive
commits

Kirill Marinushkin (4):
  ASoC: pcm512x: Fix not setting word length if DAIFMT_CBS_CFS
  ASoC: pcm512x: Rearrange operations in `hw_params()`
  ASoC: pcm512x: Move format check into `set_fmt()`
  ASoC: pcm512x: Add support for more data formats

 sound/soc/codecs/pcm512x.c | 134 ++++++++++++++++++++++++++++-----------------
 1 file changed, 84 insertions(+), 50 deletions(-)

--
2.13.6

Register shutdown handler to stop sc7180 lpass platform driver
and to disable audio clocks.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1605292702-25046-1-git-send-email-srivasam@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add 32 bit format support for capture in lpass-sc7180
snd_soc_dai_driver capabilities. Need to add contstraints
in machine driver so that only specific format allowed.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Manidadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1605512955-7017-1-git-send-email-srivasam@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add Kconfig entries, PCI ID and chip info for Alderlake-S product.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201116142642.2106067-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When compiled with CONFIG_HAVE_CLK, the kernel need to get provider for the
clock API. This is usually selected by the platform and the sound drivers
should not really care about this. However COMPILE_TEST is special and the
platform required may not have been selected, leading to this type of
error:

> aiu-encoder-spdif.c:(.text+0x3a0): undefined reference to `clk_set_parent'

Since we need a sane provider of the API with COMPILE_TEST, depends on
COMMON_CLK.

Fixes: 6dc4fa17 ("ASoC: meson: add axg fifo base driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201116172423.546855-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "no_headphone" variable is never set to "false" so it could be
uninitialized.

Fixes: e936619b ("ASoC: qcom: sc7180: Modify machine driver for sound card")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201116125950.GA44063@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

With LPT switching to WPT-based power on/off routines, functions that
have been previously used by it are rendered redundant so remove them.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201116133332.8530-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is no need for separate power on/off routines for LPT and WPT as
as the protocol is shared for both platforms. Make WPT routines generic
and reuse them in LPT case too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201116133332.8530-5-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Initial user settings such as volume control need to be applied only
once after stream is allocated. As prepare() operation can be invoked
multiple times during the stream's lifetime, relocate
catpt_dai_apply_usettings() and call it directly within
catpt_dai_hw_params() rather than on every catpt_dai_prepare().

catpt_dai_apply_usettings() remains unchanged.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201116133332.8530-4-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>