- 27 Jan, 2020 40 commits
-
-
Rafael J. Wysocki authored
[ Upstream commit 3cd7957e ] First, after a previous change causing all runtime-suspended devices in the ACPI PM domain (and ACPI LPSS devices) to be resumed before creating a snapshot image of memory during hibernation, it is not necessary to worry about the case in which them might be left in runtime-suspend any more, so get rid of the code related to that from ACPI PM domain and ACPI LPSS hibernation callbacks. Second, it is not correct to use pm_generic_resume_early() and acpi_subsys_resume_noirq() in hibernation "restore" callbacks (which currently happens in the ACPI PM domain and ACPI LPSS), so introduce proper _restore_late and _restore_noirq callbacks for the ACPI PM domain and ACPI LPSS. Fixes: 05087360 (ACPI / PM: Take SMART_SUSPEND driver flag into account) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Rafael J. Wysocki authored
[ Upstream commit 501debd4 ] Both the PCI bus type and the ACPI PM domain avoid resuming runtime-suspended devices with DPM_FLAG_SMART_SUSPEND set during hibernation (before creating the snapshot image of system memory), but that turns out to be a mistake. It leads to functional issues and adds complexity that's hard to justify. For this reason, resume all runtime-suspended PCI devices and all devices in the ACPI PM domains before creating a snapshot image of system memory during hibernation. Fixes: 05087360 (ACPI / PM: Take SMART_SUSPEND driver flag into account) Fixes: c4b65157 (PCI / PM: Take SMART_SUSPEND driver flag into account) Link: https://lore.kernel.org/linux-acpi/917d4399-2e22-67b1-9d54-808561f9083f@uwyo.edu/T/#maf065fe6e4974f2a9d79f332ab99dfaba635f64cReported-by:
Robert R. Howell <RHowell@uwyo.edu> Tested-by:
-
Jouni Malinen authored
[ Upstream commit bebe4681 ] The conversion of UML to use epoll based IRQ controller claimed that clone_one_chan() can safely call um_free_irq() while starting to ignore the delay_free_irq parameter that explicitly noted that the IRQ cannot be freed because this is being called from chan_interrupt(). This resulted in free_irq() getting called in interrupt context ("Trying to free IRQ 6 from IRQ context!"). Fix this by restoring previously used delay_free_irq processing. Fixes: ff6a1798 ("Epoll based IRQ controller") Signed-off-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Chuck Lever authored
[ Upstream commit 2d0abe36 ] Dereference wr->next /before/ the memory backing wr has been released. This issue was found by code inspection. It is not expected to be a significant problem because it is in an error path that is almost never executed. Fixes: 7c8d9e7c ("xprtrdma: Move Receive posting to ... ") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 3427beb6 ] With gcc 4.1: net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’: net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function Indeed, if the first jump to the send_fragmentable label is made, and the address family is not handled in the switch() statement, ret will be used uninitialized. Fix this by BUG()'ing as is done in other places in rxrpc where internal support for future address families will need adding. It should not be possible to reach this normally as the address families are checked up-front. Fixes: 5a924b89 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 02f36911 ] ida instances allocate some internal memory for ->free_bitmap in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Fixes: 4b45efe8 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Kevin Mitchell authored
[ Upstream commit 3ddbe913 ] Make it safe to call iommu_disable during early init error conditions before mmio_base is set, but after the struct amd_iommu has been added to the amd_iommu_list. For example, this happens if firmware fails to fill in mmio_phys in the ACPI table leading to a NULL pointer dereference in iommu_feature_disable. Fixes: 2c0ae172 ('iommu/amd: Convert iommu initialization to state machine') Signed-off-by:
Kevin Mitchell <kevmitch@arista.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 4ca5fa39 ] Some firmware versions do not support this so use the silent variant to send the message to firmware to suppress the harmless error. This error message is unnecessarily alarming the user. Fixes: afdc8a84 ("bnxt_en: Add DCBNL DSCP application protocol support.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit d27e2ca1 ] After ethtool loopback packet tests, we re-open the nic for the next IRQ test. If the open fails, we must not proceed with the IRQ test or we will crash with NULL pointer dereference. Fix it by checking the bnxt_open_nic() return code before proceeding. Reported-by:
Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Fixes: 67fea463 ("bnxt_en: Add interrupt test to ethtool -t selftest.") Signed-off-by:
-
Andrea Arcangeli authored
[ Upstream commit 1bf4580e ] Commit 5eed6f1d ("fork,memcg: fix crash in free_thread_stack on memcg charge fail") corrected two instances, but there was a third instance of this bug. Without setting tsk->stack, if memcg_charge_kernel_stack fails, it'll execute free_thread_stack() on a dangling pointer. Enterprise kernels are compiled with VMAP_STACK=y so this isn't critical, but custom VMAP_STACK=n builds should have some performance advantage, with the drawback of risking to fail fork because compaction didn't succeed. So as long as VMAP_STACK=n is a supported option it's worth fixing it upstream. Link: http://lkml.kernel.org/r/20190619011450.28048-1-aarcange@redhat.com Fixes: 9b6f7e16 ("mm: rework memcg kernel stack accounting") Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Rik van Riel <riel@surriel.com> Acked-by:
Roman Gushchin <guro@fb.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Matthias Kaehlcke authored
[ Upstream commit 73fbfc49 ] With commit 88ba95be ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") the number of set bits (aka hweight()) in the PWM period is used in the heuristic to determine the number of brightness levels, when the brightness table isn't specified in the DT. The number of set bits doesn't provide a reliable clue about the length of the period, instead change the heuristic to: nlevels = period / fls(period) Also limit the maximum number of brightness levels to 4096 to avoid excessively large tables. With this the number of levels increases monotonically with the PWM period, until the maximum of 4096 levels is reached: period (ns) # levels 100 16 500 62 1000 111 5000 416 10000 769 50000 3333 100000 4096 Fixes: 88ba95be ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Tested-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 6c6874f4 ] cgroup code tries to use argv[0] as the cgroup path, but if it fails uses argv[1] to report errors. Fixes: 5ccda64d ("bpftool: implement cgroup bpf operations") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Bryan O'Donoghue authored
[ Upstream commit 159dbaf5 ] The RELAX field of the OCOTP block is turning out as a zero on i.MX8MM. This messes up the subsequent re-load of the fuse shadow registers. After some discussion with people @ NXP its clear we have missed a trick here in Linux. The OCOTP fuse programming time has a physical minimum 'burn time' that is not related to the ipg_clk. We need to define the RELAX, STROBE_READ and STROBE_PROG fields in terms of desired timings to allow for the burn-in to safely complete. Right now only the RELAX field is calculated in terms of an absolute time and we are ending up with a value of zero. This patch inherits the u-boot timings for the OCOTP_TIMING calculation on the i.MX6 and i.MX8. Those timings are known to work and critically specify values such as STROBE_PROG as a minimum timing. Fixes: 0642bac7 ("nvmem: imx-ocotp: add write support") Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bryan O'Donoghue authored
[ Upstream commit 0493c479 ] The i.MX6 and i.MX8 both have a bit-field spanning bits 27:22 called the WAIT field. The WAIT field according to the documentation for both parts "specifies time interval between auto read and write access in one time program. It is given in number of ipg_clk periods." This patch ensures that the relevant field is read and written back to the timing register. Fixes: 0642bac7 ("nvmem: imx-ocotp: add write support") Signed-off-by:
-
Nathan Huckleberry authored
[ Upstream commit da642427 ] Clang produces the following warning drivers/clk/qcom/gcc-msm8996.c:133:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div_map[] = { ^drivers/clk/qcom/gcc-msm8996.c:141:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll0_early_div[] = { ^ drivers/clk/qcom/gcc-msm8996.c:187:32: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map' [-Wunused-const-variable] static const struct parent_map gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div_map[] = { ^ drivers/clk/qcom/gcc-msm8996.c:197:27: warning: unused variable 'gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div' [-Wunused-const-variable] static const char * const gcc_xo_gpll0_gpll2_gpll3_gpll1_gpll4_gpll0_early_div[] = { It looks like these were never used. Fixes: b1e010c0 ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver") Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/518Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit c24a5c73 ] The commit 080edf75 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") has been mistakenly submitted. The further investigations show that the original code does better job since the memory side transfer size has never been configured by DMA users. As per latest revision of documentation: "Channel minimum transfer size (CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and minimum value that can be programmed is 1." This reverts commit 080edf75. Fixes: 080edf75 ("dmaengine: hsu: set HSU_CH_MTSR to memory width") Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Ravi Bangoria authored
[ Upstream commit 913a90bc ] perf_event_open() limits the sample_period to 63 bits. See: 0819b2e3 ("perf: Limit perf_event_attr::sample_period to 63 bits") Make ioctl() consistent with it. Also on PowerPC, negative sample_period could cause a recursive PMIs leading to a hang (reported when running perf-fuzzer). Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: maddy@linux.vnet.ibm.com Cc: mpe@ellerman.id.au Fixes: 0819b2e3 ("perf: Limit perf_event_attr::sample_period to 63 bits") Link: https://lkml.kernel.org/r/20190604042953.914-1-ravi.bangoria@linux.ibm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 40cb35d5 ] When we perform an inexact match on FIB nodes via fib6_locate_1(), longer prefixes will be preferred to shorter ones. However, it might happen that a node, with higher fn_bit value than some other, has no valid routing information. In this case, we'll pick that node, but it will be discarded by the check on RTN_RTINFO in fib6_locate(), and we might miss nodes with valid routing information but with lower fn_bit value. This is apparent when a routing exception is created for a default route: # ip -6 route list fc00:1::/64 dev veth_A-R1 proto kernel metric 256 pref medium fc00:2::/64 dev veth_A-R2 proto kernel metric 256 pref medium fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 pref medium fe80::/64 dev veth_A-R1 proto kernel metric 256 pref medium fe80::/64 dev veth_A-R2 proto kernel metric 256 pref medium default via fc00:1::2 dev veth_A-R1 metric 1024 pref medium # ip -6 route list cache fc00:4::1 via fc00:2::2 dev veth_A-R2 metric 1024 expires 593sec mtu 1500 pref medium fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 593sec mtu 1500 pref medium # ip -6 route flush cache # node for default route is discarded Failed to send flush request: No such process # ip -6 route list cache fc00:3::1 via fc00:1::2 dev veth_A-R1 metric 1024 expires 586sec mtu 1500 pref medium Check right away if the node has a RTN_RTINFO flag, before replacing the 'prev' pointer, that indicates the longest matching prefix found so far. Fixes: 38fbeeee ("ipv6: prepare fib6_locate() for exception table") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Rob Clark authored
[ Upstream commit f47bee2b ] These regs are write-only, and the hw throws a hissy-fit (ie. reboots) when we try to read them for GPU state snapshot, in response to a GPU hang. It is rather impolite when GPU recovery triggers an insta- reboot, so lets remove the TPL1 registers from the snapshot. Fixes: 7198e6b0 drm/msm: add a3xx gpu support Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 0bb9d187 ] The external PCF8563 RTC chip's interrupt line is connected to the NMI line on the SoC. Add the interrupt line to the device tree. Fixes: 17ebc33a ("arm64: allwinner: h6: add PCF8563 RTC on Pine H64 board") Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 45d5cb13 ] If register_qdisc fails, we should unregister netdevice notifier. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: e0a7683d ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Fabrizio Castro authored
[ Upstream commit d211650a ] SDR50 isn't working anymore because the GPIO regulator driver is using descriptors since commit d6cd33ad ("regulator: gpio: Convert to use descriptors") which in turn causes the system to use the polarity of the GPIOs (as specified in the DT) for selecting the states, but the polarity specified in the DT is wrong. This patch fixes the regulator DT definition, and that fixes SDR50. Fixes: 029efb3a ("ARM: dts: iwg20d-q7: Add SDHI1 support") Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 3572e8ae ] Besides the alarm, the PCF8563 also has a timer triggered interrupt. In cases where the previous system left the timer and interrupts on, or somehow the bits got enabled, the interrupt would keep triggering as the kernel doesn't know about it. Clear both the alarm and timer event flags, and disable the interrupts, before requesting the interrupt line. Fixes: ede3e9d4 ("drivers/rtc/rtc-pcf8563.c: add alarm support") Fixes: a45d528a ("rtc: pcf8563: clear expired alarm at boot time") Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 65f662cb ] The PCF8563 datasheet says the interrupt line is active low and stays active until the events are cleared, i.e. a level trigger interrupt. Fix the flags used to request the interrupt. Fixes: ede3e9d4 ("drivers/rtc/rtc-pcf8563.c: add alarm support") Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit fd14f443 ] If multiple serializers are connected in the system and the number of channels will need to use more than one serializer the mask to enable the serializers were left to 0 if tdm_mask is provided Fixes: dd55ff83 ("ASoC: davinci-mcasp: Add set_tdm_slots() support") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 06996c1d ] Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still open HiperTransport-based connections. For robust operation these connections require the af_iucv_netdev_notifier, so register it unconditionally. Also handle any error that register_netdevice_notifier() returns. Fixes: 9fbd87d4 ("af_iucv: handle netdev events") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 238965b7 ] The HiperSockets-based transport path in af_iucv is still too closely entangled with qeth. With commit a647a025 ("s390/qeth: speed-up L3 IQD xmit"), the relevant xmit code in qeth has begun to use skb_cow_head(). So to avoid unnecessary skb head expansions, af_iucv must learn to 1) respect dev->needed_headroom when allocating skbs, and 2) drop the header reference before cloning the skb. While at it, also stop hard-coding the LL-header creation stage and just use the appropriate helper. Fixes: a647a025 ("s390/qeth: speed-up L3 IQD xmit") Signed-off-by:
-
Fred Klassen authored
[ Upstream commit 76e21533 ] Fixes an issue where TX Timestamps are not arriving on the error queue when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING. This can be illustrated with an updated updgso_bench_tx program which includes the '-T' option to test for this condition. It also introduces the '-P' option which will call poll() before reading the error queue. ./udpgso_bench_tx -4ucTPv -S 1472 -l2 -D 172.16.120.18 poll timeout udp tx: 0 MB/s 1 calls/s 1 msg/s The "poll timeout" message above indicates that TX timestamp never arrived. This patch preserves tx_flags for the first UDP GSO segment. Only the first segment is timestamped, even though in some cases there may be benefital in timestamping both the first and last segment. Factors in deciding on first segment timestamp only: - Timestamping both first and last segmented is not feasible. Hardware can only have one outstanding TS request at a time. - Timestamping last segment may under report network latency of the previous segments. Even though the doorbell is suppressed, the ring producer counter has been incremented. - Timestamping the first segment has the upside in that it reports timestamps from the application's view, e.g. RTT. - Timestamping the first segment has the downside that it may underreport tx host network latency. It appears that we have to pick one or the other. And possibly follow-up with a config flag to choose behavior. v2: Remove tests as noted by Willem de Bruijn <willemb@google.com> Moving tests from net to net-next v3: Update only relevant tx_flag bits as per Willem de Bruijn <willemb@google.com> v4: Update comments and commit message as per Willem de Bruijn <willemb@google.com> Fixes: ee80d1eb ("udp: add udp gso") Signed-off-by:
Fred Klassen <fklassen@appneta.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 177b8007 ] When GSO frame has to be corrupted netem uses skb_gso_segment() to produce the list of frames, and re-enqueues the segments one by one. The backlog length has to be adjusted to account for new frames. The current calculation is incorrect, leading to wrong backlog lengths in the parent qdisc (both bytes and packets), and incorrect packet backlog count in netem itself. Parent backlog goes negative, netem's packet backlog counts all non-first segments twice (thus remaining non-zero even after qdisc is emptied). Move the variables used to count the adjustment into local scope to make 100% sure they aren't used at any stage in backports. Fixes: 6071bd1a ("netem: Segment GSO packets on enqueue") Signed-off-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jeffrey Hugo authored
[ Upstream commit fc19cbb7 ] If mdp5_cfg_init fails because of an unknown major version, a null pointer dereference occurs. This is because the caller of init expects error pointers, but init returns NULL on error. Fix this by returning the expected values on error. Fixes: 2e362e17 (drm/msm/mdp5: introduce mdp5_cfg module) Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Mike Marciniszyn authored
[ Upstream commit 942a8993 ] The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Anton Protopopov authored
[ Upstream commit 56f0f84e ] The bpf_ipv6_fib_lookup function should return BPF_FIB_LKUP_RET_FWD_DISABLED when forwarding is disabled for the input device. However instead of checking if forwarding is enabled on the input device, it checked the global net->ipv6.devconf_all->forwarding flag. Change it to behave as expected. Fixes: 87f5fc7e ("bpf: Provide helper to do forwarding lookups in kernel FIB table") Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Nathan Lynch authored
[ Upstream commit e610a466 ] It's common for the platform to replace the cache device nodes after a migration. Since the cacheinfo code is never informed about this, it never drops its references to the source system's cache nodes, causing it to wind up in an inconsistent state resulting in warnings and oopses as soon as CPU online/offline occurs after the migration, e.g. cache for /cpus/l3-cache@3113(Unified) refers to cache for /cpus/l2-cache@200d(Unified) WARNING: CPU: 15 PID: 86 at arch/powerpc/kernel/cacheinfo.c:176 release_cache+0x1bc/0x1d0 [...] NIP release_cache+0x1bc/0x1d0 LR release_cache+0x1b8/0x1d0 Call Trace: release_cache+0x1b8/0x1d0 (unreliable) cacheinfo_cpu_offline+0x1c4/0x2c0 unregister_cpu_online+0x1b8/0x260 cpuhp_invoke_callback+0x114/0xf40 cpuhp_thread_fun+0x270/0x310 smpboot_thread_fn+0x2c8/0x390 kthread+0x1b8/0x1c0 ret_from_kernel_thread+0x5c/0x68 Using device tree notifiers won't work since we want to rebuild the hierarchy only after all the removals and additions have occurred and the device tree is in a consistent state. Call cacheinfo_teardown() before processing device tree updates, and rebuild the hierarchy afterward. Fixes: 410bccf9 ("powerpc/pseries: Partition migration in the kernel") Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nathan Lynch authored
[ Upstream commit d4aa219a ] Allow external callers to force the cacheinfo code to release all its references to cache nodes, e.g. before processing device tree updates post-migration, and to rebuild the hierarchy afterward. CPU online/offline must be blocked by callers; enforce this. Fixes: 410bccf9 ("powerpc/pseries: Partition migration in the kernel") Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit 43cf40d9 ] Fix uninitialized variable warning by static checker. Fixes: ae3488ff ("qed: Add ll2 connection for processing unaligned MPA packets") Signed-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit 6117561e ] Destroy QP waits for it's ep object state to be set to CLOSED before proceeding. ep->state can be updated from a different context. Add smp_store_release/READ_ONCE to synchronize. Fixes: fc4c6065 ("qed: iWARP implement disconnect flows") Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 7e0d7d0f ] Right justified format is actually not supported by the amlogic tdm output encoder. Fixes: c41c2a35 ("ASoC: meson: add tdm output driver") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 47c317b7 ] Right justified format is actually not supported by the amlogic tdm input decoder. Fixes: 13a22e6a ("ASoC: meson: add tdm input driver") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ff148d8a ] This code triggers a Smatch warning: drivers/ntb/hw/mscc/ntb_hw_switchtec.c:884 switchtec_ntb_init_sndev() warn: should '(1 << sndev->peer_partition)' be a 64 bit type? The "part_map" and "tpart_vec" variables are u64 type so this seems like a valid warning. Fixes: 3df54c87 ("ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setups") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Peng Fan authored
[ Upstream commit c0759b9b ] The boolean rate_discrete needs to be assigned to clk->rate_discrete, so that clock driver can distinguish between the continuous range and discrete rates. It uses this in scmi_clk_round_rate could get the rounded value if it's a continuous range. Fixes: 5f6c6430 ("firmware: arm_scmi: add initial support for clock protocol") Signed-off-by:
Peng Fan <peng.fan@nxp.com> [sudeep.holla: updated commit message] Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
