Convert NXP medium quality sound (MQS) device tree binding
documentation to json-schema.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231122101959.30264-4-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The virtual widget example makes use of an undefined SND_SOC_DAPM_NOPM
argument passed to SND_SOC_DAPM_MIXER().  Replace with the correct
SND_SOC_NOPM definition.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20231121120751.77355-1-cristian.ciocaltea@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Low power audio mode requires binding codec still power on while Acore
enters into suspend so Mcore can continue playback music.

ASoC machine driver acquires DAPM endpoints through reading
"ignore-suspend-widgets" property from DT and then forces the path
between these endpoints ignoring suspend.

If the rpmsg sound card is in low power audio mode, the suspend/resume
callback of binding codec is overridden to disable the suspend/resume.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20231121052512.20235-2-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a property to list audio sound widgets which are marked ignoring
system suspend. Paths between these endpoints are still active over
suspend of the main application processor that the current operating
system is running.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20231121052512.20235-1-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:

sound/soc/codecs/nau8810.c:183:25: sparse: warning: incorrect type in assignment
sound/soc/codecs/nau8810.c:183:25: sparse: expected int
sound/soc/codecs/nau8810.c:183:25: sparse: got restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16

This issue is not still actively checked by kernel test robot.
Actually, it is same with nau8822's sparse warnings issue.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231120084227.1766633-1-CTLIN0@nuvoton.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove linux/of.h as is included more than once.
Reported by make includecheck.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20231119104514.25536-1-tanure@linux.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Maciej Strozek <mstrozek@opensource.cirrus.com>:

This patchset aims to add minor fixes (first two patches) and
introduce general improvements to the driver (rest of the patches)

Make sure these inputs are mutually exclusive as recommended by the
datasheet
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-8-mstrozek@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-6-mstrozek@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Also remove one unnecessary debug print
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-5-mstrozek@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SSI block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,r9a07g043-ssi" compatible string will be used on the RZ/Five
SoC so to make this clear and to keep this file consistent, update the
comment to include RZ/Five SoC.

No driver changes are required as generic compatible string
"renesas,rz-ssi" will be used as a fallback on RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231115213358.33400-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

add missing dependent SND_SOC_AMD_ACP_LEGACY_COMMON flag for ACP70 platform.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20231116053405.2574081-1-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add LDO output selection for dacref.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/62cad4e51c044108bad872ab349e36f8@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

ACP7.0 based platform legacy drivers can be built by selecting
necessary kernel config option. This patch enables build support
of the same.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20231113123345.2196504-1-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

RT5650 is I2S codec integrated with HP and SPK.
The HW board connects SoC I2S to RT5650 codec as below:

I2S0: ALC5650 aif1 for Speaker
I2S2: ALC5650 aif2 for Headphone
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231113115907.18539-1-mac.chiang@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fixes: 2b59332e ("ASoC: cs42l43: Use new-style PM runtime macros")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311091824.5z6PROGZ-lkp@intel.com/Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231113151429.1554139-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Zhu Ning <zhuning0077@gmail.com>:

We developed a new version of the chip. 3 Three patches are used for
compatibility with the old and new versions of the chip.We did tests
with the new driver at version_v0 and version_v3.The test results
from the test department met our expectations.Both versions work well
with the new drivers.

Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:

This is used for configuring MICFIL PDM with i.MX8MPlus. Tested
with 8MIC-RPI-MX8 microphone array.

Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:

Instead of using MODULE_ALIAS() to load boards, add proper device id
table and use MODULE_DEVICE_TABLE() macro to create board alias.

Merge series from Trevor Wu <trevor.wu@mediatek.com>:

There are some variables that are no longer being used because they
were declared for the deprecated memory layout. Currently, these code
sections confuse the users. Therefore, this series removes the code
that was implemented for those variables.

Merge series from Seven Lee <wtli@nuvoton.com>:

Determine DMIC slew rate via property setup.

Change:
V3 -> V4:
 - add "maximum: 7" description.

V2 -> V3:
 - Update description of DMIC slew rate and remove
   "selection" key words from property name
 - Corrected variable name of DMIC slew rate from c file

V1 -> V2:
 - Corrected description of DMIC slew rate.

Seven Lee (2):
  ASoC: dt-bindings: nau8821: Add DMIC slew rate.
  ASoC: nau8821: Add slew rate controls.

 .../devicetree/bindings/sound/nuvoton,nau8821.yaml       | 9 +++++++++
 sound/soc/codecs/nau8821.c                               | 7 +++++++
 sound/soc/codecs/nau8821.h                               | 3 +++
 3 files changed, 19 insertions(+)

--
2.25.1

The list iterator in a list_for_each_entry() loop can never be NULL.
Remove the check and pull the code in a tab.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/e376a712-e0c6-446f-9e0b-c444dd795cbb@moroto.mountainSigned-off-by: Mark Brown <broonie@kernel.org>

Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire".  Correct examples, so the incorrect
code will not be re-used.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231107101610.13728-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add sound card for SM8550, which as of now looks fully compatible with
SM8450.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231106180422.170492-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the binding to DT schema format. Note, that "IPVDD-supply"
got fixed to be "HPVDD-supply" during the conversion. This was
obviously a typo in the old binding. The old binding example, DT
files, chip datasheet and Linux driver use HPVDD.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231109184453.108676-1-sebastian.reichel@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Modify the aw88395_lib file so that the bin file
parsing is no longer related to the chip id of the chip.
Adopt the bin file data type "prof_data_type" as the
differentiation between different chip bin file
parsing methods.

Since the chip id macro for the aw88399 is no longer
defined in aw88395_reg.h, define the chip id
for the aw88399 in aw88399.h
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231109093708.13155-1-wangweidong.a@awinic.comSigned-off-by: Mark Brown <broonie@kernel.org>

dma_request_slave_channel() is deprecated. dma_request_chan() should
be used directly instead.

Switch to the preferred function and update the error handling accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b78685e4103f12931ddb09c1654bc6b04b640868.1699724240.git.christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>

The use of 'definitions' is not necessary and also problematic because the
dtschema tools don't process 'definitions' resulting in this spurious
warning:

Documentation/devicetree/bindings/sound/renesas,rsnd.example.dtb: sound@ec500000: port:endpoint: Unevaluated properties are not allowed ('phandle' was unexpected)
        from schema $id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#

Fix this by moving the port schema to #/properties/port and referencing
that directly from the 'ports' schema.

Really, a binding should just always use 'ports' if multiple ports are
possible. There's no benefit to supporting both forms. However, it appears
there are already lots of users of this one with a single 'port' node.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231101140923.16344-2-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Correct the formats order for dai driver structures.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20231031135949.1064581-2-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix indentation issue reported in acp70_pcm_resume() function.

Fixes: e84db124 (ASoC: amd: acp: Add pci legacy driver support
	for acp7.0 platform")
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://lore.kernel.org/r/20231031135949.1064581-1-Syed.SabaKareem@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

New DAPM widgets are created based on a provided template. When cloning
the data, the name and stream name also need to be cloned. Currently the
data and the names are initialized in different places. Simplify the
code by having entire initialization in one place.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026113549.1897368-1-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The sti-uniperf pcm_config is the same as the default pcm_config.

Since commit 43556516 ("ASoC: soc-generic-dmaengine-pcm:
Use default config when none is given"), passing a NULL pointer
could let this driver use the default config.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Link: https://lore.kernel.org/r/20231106-sti-uniperf-v1-1-b2d8749cfa2e@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

To prevent confusion on the follow-up platform, it is necessary to
remove any unused variables within the struct mtk_adsp_chip_info.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-4-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-3-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-2-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The old headset detection time is not enough for the new chip version.
An error occurs with the old detection time.According to tests,
400ms is the best detection time that does not trigger an error.
The delay time after the trigger is reduced by 300ms to
keep the whole detection time unchanged.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-4-zhuning0077@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

New chip versions require new initialisation and playback processes.
Changing the initialisation and playback process for better results.
The old chip versions are going to work well with the new sequences.
We've tested this with version_v0 and version_v3 chips
under the new sequence and they both pass.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-3-zhuning0077@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The new chip version requires the addition of a new clock table.
We determine which clock table to choose based on the version.
Newer versions of the chip have fewer processes to go through
in the headset detection, so the version flag is used to skip them.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-2-zhuning0077@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>