Skip to content

L
linux
Switch branch/tag
  1. 14 Dec, 2015 33 commits
  3. 13 Dec, 2015 7 commits
    • David Howells's avatar
      FS-Cache: Handle a write to the page immediately beyond the EOF marker · c8aedb3b
      David Howells authored 
      commit 102f4d90 upstream.

Handle a write being requested to the page immediately beyond the EOF
marker on a cache object.  Currently this gets an assertion failure in
CacheFiles because the EOF marker is used there to encode information about
a partial page at the EOF - which could lead to an unknown blank spot in
the file if we extend the file over it.

The problem is actually in fscache where we check the index of the page
being written against store_limit.  store_limit is set to the number of
pages that we're allowed to store by fscache_set_store_limit() - which
means it's one more than the index of the last page we're allowed to store.
The problem is that we permit writing to a page with an index _equal_ to
the store limit - when we should reject that case.

Whilst we're at it, change the triggered assertion in CacheFiles to just
return -ENOBUFS instead.

The assertion failure looks something like this:

CacheFiles: Assertion failed
1000 < 7b1 is false
------------[ cut here ]------------
kernel BUG at fs/cachefiles/rdwr.c:962!
...
RIP: 0010:[<ffffffffa02c9e83>]  [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles]
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
[ kamal: backport to 3.13-stable: no __kernel_write(); thanks Ben H. ]
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      c8aedb3b
    • Mathias Krause's avatar
      printk: prevent userland from spoofing kernel messages · fd7060f6
      Mathias Krause authored 
      commit 3824657c upstream.

The following statement of ABI/testing/dev-kmsg is not quite right:

   It is not possible to inject messages from userspace with the
   facility number LOG_KERN (0), to make sure that the origin of the
   messages can always be reliably determined.

Userland actually can inject messages with a facility of 0 by abusing the
fact that the facility is stored in a u8 data type.  By using a facility
which is a multiple of 256 the assignment of msg->facility in log_store()
implicitly truncates it to 0, i.e.  LOG_KERN, allowing users of /dev/kmsg
to spoof kernel messages as shown below:

The following call...
   # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg
...leads to the following log entry (dmesg -x | tail -n 1):
   user  :emerg : [   66.137758] Kernel panic - not syncing: beer empty

However, this call...
   # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg
...leads to the slightly different log entry (note the kernel facility):
   kern  :emerg : [   74.177343] Kernel panic - not syncing: beer empty

Fix that by limiting the user provided facility to 8 bit right from the
beginning and catch the truncation early.

Fixes: 7ff9554b ("printk: convert byte-buffer to variable-length...")
Signed-off-by: default avatarMathias Krause <minipli@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Alex Elder <elder@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
[ kamal: backport to 3.13-stable: retain local 'int i' ]
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      fd7060f6
    • Takashi Iwai's avatar
      ALSA: hda - Disable 64bit address for Creative HDA controllers · cd21931f
      Takashi Iwai authored 
      commit cadd16ea upstream.

We've had many reports that some Creative sound cards with CA0132
don't work well.  Some reported that it starts working after reloading
the module, while some reported it starts working when a 32bit kernel
is used.  All these facts seem implying that the chip fails to
communicate when the buffer is located in 64bit address.

This patch addresses these issues by just adding AZX_DCAPS_NO_64BIT
flag to the corresponding PCI entries.  I casually had a chance to
test an SB Recon3D board, and indeed this seems helping.

Although this hasn't been tested on all Creative devices, it's safer
to assume that this restriction applies to the rest of them, too.  So
the flag is applied to all Creative entries.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
[ kamal: backport to 3.13-stable: context ]
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      cd21931f
    • Ingo Molnar's avatar
      fs/proc, core/debug: Don't expose absolute kernel addresses via wchan · a9ba345c
      Ingo Molnar authored 
      commit b2f73922 upstream.

So the /proc/PID/stat 'wchan' field (the 30th field, which contains
the absolute kernel address of the kernel function a task is blocked in)
leaks absolute kernel addresses to unprivileged user-space:

        seq_put_decimal_ull(m, ' ', wchan);

The absolute address might also leak via /proc/PID/wchan as well, if
KALLSYMS is turned off or if the symbol lookup fails for some reason:

static int proc_pid_wchan(struct seq_file *m, struct pid_namespace *ns,
                          struct pid *pid, struct task_struct *task)
{
        unsigned long wchan;
        char symname[KSYM_NAME_LEN];

        wchan = get_wchan(task);

        if (lookup_symbol_name(wchan, symname) < 0) {
                if (!ptrace_may_access(task, PTRACE_MODE_READ))
                        return 0;
                seq_printf(m, "%lu", wchan);
        } else {
                seq_printf(m, "%s", symname);
        }

        return 0;
}

This isn't ideal, because for example it trivially leaks the KASLR offset
to any local attacker:

  fomalhaut:~> printf "%016lx\n" $(cat /proc/$$/stat | cut -d' ' -f35)
  ffffffff8123b380

Most real-life uses of wchan are symbolic:

  ps -eo pid:10,tid:10,wchan:30,comm

and procps uses /proc/PID/wchan, not the absolute address in /proc/PID/stat:

  triton:~/tip> strace -f ps -eo pid:10,tid:10,wchan:30,comm 2>&1 | grep wchan | tail -1
  open("/proc/30833/wchan", O_RDONLY)     = 6

There's one compatibility quirk here: procps relies on whether the
absolute value is non-zero - and we can provide that functionality
by outputing "0" or "1" depending on whether the task is blocked
(whether there's a wchan address).

These days there appears to be very little legitimate reason
user-space would be interested in  the absolute address. The
absolute address is mostly historic: from the days when we
didn't have kallsyms and user-space procps had to do the
decoding itself via the System.map.

So this patch sets all numeric output to "0" or "1" and keeps only
symbolic output, in /proc/PID/wchan.

( The absolute sleep address can generally still be profiled via
  perf, by tasks with sufficient privileges. )
Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
Acked-by: default avatarKees Cook <keescook@chromium.org>
Acked-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150930135917.GA3285@gmail.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
[ kamal: backport to 3.16-stable: proc_pid_wchan context ]
Signed-off-by: default avatarKamal Mostafa <kamal@canonical.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a9ba345c
    • Kosuke Tatsukawa's avatar
      tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c · b83c9091
      Kosuke Tatsukawa authored 
      commit e81107d4 upstream.

My colleague ran into a program stall on a x86_64 server, where
n_tty_read() was waiting for data even if there was data in the buffer
in the pty.  kernel stack for the stuck process looks like below.
 #0 [ffff88303d107b58] __schedule at ffffffff815c4b20
 #1 [ffff88303d107bd0] schedule at ffffffff815c513e
 #2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818
 #3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2
 #4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23
 #5 [ffff88303d107dd0] tty_read at ffffffff81368013
 #6 [ffff88303d107e20] __vfs_read at ffffffff811a3704
 #7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57
 #8 [ffff88303d107f00] sys_read at ffffffff811a4306
 #9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7

There seems to be two problems causing this issue.

First, in drivers/tty/n_tty.c, __receive_buf() stores the data and
updates ldata->commit_head using smp_store_release() and then checks
the wait queue using waitqueue_active().  However, since there is no
memory barrier, __receive_buf() could return without calling
wake_up_interactive_poll(), and at the same time, n_tty_read() could
start to wait in wait_woken() as in the following chart.

        __receive_buf()                         n_tty_read()
------------------------------------------------------------------------
if (waitqueue_active(&tty->read_wait))
/* Memory operations issued after the
   RELEASE may be completed before the
   RELEASE operation has completed */
                                        add_wait_queue(&tty->read_wait, &wait);
                                        ...
                                        if (!input_available_p(tty, 0)) {
smp_store_release(&ldata->commit_head,
                  ldata->read_head);
                                        ...
                                        timeout = wait_woken(&wait,
                                          TASK_INTERRUPTIBLE, timeout);
------------------------------------------------------------------------

The second problem is that n_tty_read() also lacks a memory barrier
call and could also cause __receive_buf() to return without calling
wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken()
as in the chart below.

        __receive_buf()                         n_tty_read()
------------------------------------------------------------------------
                                        spin_lock_irqsave(&q->lock, flags);
                                        /* from add_wait_queue() */
                                        ...
                                        if (!input_available_p(tty, 0)) {
                                        /* Memory operations issued after the
                                           RELEASE may be completed before the
                                           RELEASE operation has completed */
smp_store_release(&ldata->commit_head,
                  ldata->read_head);
if (waitqueue_active(&tty->read_wait))
                                        __add_wait_queue(q, wait);
                                        spin_unlock_irqrestore(&q->lock,flags);
                                        /* from add_wait_queue() */
                                        ...
                                        timeout = wait_woken(&wait,
                                          TASK_INTERRUPTIBLE, timeout);
------------------------------------------------------------------------

There are also other places in drivers/tty/n_tty.c which have similar
calls to waitqueue_active(), so instead of adding many memory barrier
calls, this patch simply removes the call to waitqueue_active(),
leaving just wake_up*() behind.

This fixes both problems because, even though the memory access before
or after the spinlocks in both wake_up*() and add_wait_queue() can
sneak into the critical section, it cannot go past it and the critical
section assures that they will be serialized (please see "INTER-CPU
ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a
better explanation).  Moreover, the resulting code is much simpler.

Latency measurement using a ping-pong test over a pty doesn't show any
visible performance drop.
Signed-off-by: default avatarKosuke Tatsukawa <tatsu@ab.jp.nec.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: backported to 3.16:
  - always use wake_up_interruptible() instead of wake_up_interruptible_poll()
  - adjusted context ]
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      b83c9091
    • Maxim Sheviakov's avatar
      drm/radeon: fix quirk for MSI R7 370 Armor 2X · 775ea2c0
      Maxim Sheviakov authored 
      commit 515c752d upstream.

There was a typo in the original.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=92865Signed-off-by: default avatarMaxim Sheviakov <mrader3940@yandex.ru>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      775ea2c0
    • Alex Deucher's avatar
      drm/radeon: add quirk for ASUS R7 370 · 2dc80e80
      Alex Deucher authored 
      commit 2b02ec79 upstream.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=92260Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2dc80e80
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7