- 22 Aug, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
-
- 21 Aug, 2018 8 commits
-
-
Linus Torvalds authored
Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull core signal handling updates from Eric Biederman: "It was observed that a periodic timer in combination with a sufficiently expensive fork could prevent fork from every completing. This contains the changes to remove the need for that restart. This set of changes is split into several parts: - The first part makes PIDTYPE_TGID a proper pid type instead something only for very special cases. The part starts using PIDTYPE_TGID enough so that in __send_signal where signals are actually delivered we know if the signal is being sent to a a group of processes or just a single process. - With that prep work out of the way the logic in fork is modified so that fork logically makes signals received while it is running appear to be received after the fork completes" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits) signal: Don't send signals to tasks that don't exist signal: Don't restart fork when signals come in. fork: Have new threads join on-going signal group stops fork: Skip setting TIF_SIGPENDING in ptrace_init_task signal: Add calculate_sigpending() fork: Unconditionally exit if a fatal signal is pending fork: Move and describe why the code examines PIDNS_ADDING signal: Push pid type down into complete_signal. signal: Push pid type down into __send_signal signal: Push pid type down into send_signal signal: Pass pid type into do_send_sig_info signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task signal: Pass pid type into group_send_sig_info signal: Pass pid and pid type into send_sigqueue posix-timers: Noralize good_sigevent signal: Use PIDTYPE_TGID to clearly store where file signals will be sent pid: Implement PIDTYPE_TGID pids: Move the pgrp and session pid pointers from task_struct to signal_struct kvm: Don't open code task_pid in kvm_vcpu_ioctl pids: Compute task_tgid using signal->leader_pid ...
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung. Everything but the SPDX identifier updates actually came in earlier through the MFD merge. * tag 'chrome-platform-for-linus-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: chromeos_tbmc - fix SPDX identifier
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull arch/microblaze updates from Michal Simek: - use generic noncoherent direct mapping - use LDFLAGS instead of LD - pci error path fix - remove incorrect comments * tag 'microblaze-v4.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze/PCI: Remove stale pcibios_align_resource() comment microblaze: delete wrong comment about machine_early_init microblaze: add endianness options to LDFLAGS instead of LD microblaze: remove consistent_sync and consistent_sync_page microblaze: use generic dma_noncoherent_ops microblaze: warn if of_iomap() failed
-
Lorenzo Pieralisi authored
commit 01cf9d52 ("microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver") and commit ecf677c8 ("PCI: Add a generic weak pcibios_align_resource()") first patched then removed pcibios_align_resource() from the microblaze architecture code but failed to remove the comment that was added to it. Remove it since it has now become stale and it is quite confusing. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharatku@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 NO_BOOTMEM conversion from Tony Luck: "Mike Rapoport kindly fixed up ia64 to work with NO_BOOTMEM" * tag 'please-pull-noboot' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64: switch to NO_BOOTMEM ia64: use mem_data to detect nodes' minimal and maximal PFNs ia64: remove unused num_dma_physpages member from 'struct early_node_data' ia64: contig/paging_init: reduce code duplication
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: - add cgroup core selftests - fix compile warnings in android ion test - fix to bugs in exclude and skip paths in vDSO test - remove obsolete config options - add missing .gitignore file * tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Fix kprobe string testcase to not probe notrace function selftests: mount: remove no longer needed config option selftests: cgroup: add gitignore file Add cgroup core selftests selftests: vDSO - fix to return KSFT_SKIP when test couldn't be run selftests: vDSO - fix to exclude x86 test on non-x86 platforms selftests/android: initialize heap_type to avoid compiling warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: - Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockdep and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. * tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) tracing: Fix SPDX format headers to use C++ style comments tracing: Add SPDX License format tags to tracing files tracing: Add SPDX License format to bpf_trace.c blktrace: Add SPDX License format header s390/ftrace: Add -mfentry and -mnop-mcount support tracing: Add -mcount-nop option support tracing: Avoid calling cc-option -mrecord-mcount for every Makefile tracing: Handle CC_FLAGS_FTRACE more accurately Uprobe: Additional argument arch_uprobe to uprobe_write_opcode() Uprobes: Simplify uprobe_register() body tracepoints: Free early tracepoints after RCU is initialized uprobes: Use synchronize_rcu() not synchronize_sched() tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister() ftrace: Remove unused pointer ftrace_swapper_pid tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing/irqsoff: Handle preempt_count for different configs tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing: irqsoff: Account for additional preempt_disable trace: Use rcu_dereference_raw for hooks from trace-event subsystem tracing/kprobes: Fix within_notrace_func() to check only notrace functions ...
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "The main things are support for cephx v2 authentication protocol and basic support for rbd images within namespaces (myself). Also included are y2038 conversion patches from Arnd, a pile of miscellaneous fixes from Chengguang and Zheng's feature bit infrastructure for the filesystem" * tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits) ceph: don't drop message if it contains more data than expected ceph: support cephfs' own feature bits crush: fix using plain integer as NULL warning libceph: remove unnecessary non NULL check for request_key ceph: refactor error handling code in ceph_reserve_caps() ceph: refactor ceph_unreserve_caps() ceph: change to void return type for __do_request() ceph: compare fsc->max_file_size and inode->i_size for max file size limit ceph: add additional size check in ceph_setattr() ceph: add additional offset check in ceph_write_iter() ceph: add additional range check in ceph_fallocate() ceph: add new field max_file_size in ceph_fs_client libceph: weaken sizeof check in ceph_x_verify_authorizer_reply() libceph: check authorizer reply/challenge length before reading libceph: implement CEPHX_V2 calculation mode libceph: add authorizer challenge libceph: factor out encrypt_authorizer() libceph: factor out __ceph_x_decrypt() libceph: factor out __prepare_write_connect() libceph: store ceph_auth_handshake pointer in ceph_connection ...
-
- 20 Aug, 2018 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "It is now possible to add custom sysfs attributes while avoiding a possible race condition. Unused code has been removed resulting in a nice reduction of the code base. And more drivers have been switched to SPDX by their maintainers. Summary: Subsystem: - new helpers to add custom sysfs attributes - struct rtc_task removal along with rtc_irq_[un]register() - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore Drivers: - armada38x: reset after rtc power loss - ds1307: now supports m41t11 - isl1208: now supports isl1219 and tamper detection - pcf2127: internal SRAM support" * tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits) rtc: ds1307: simplify hwmon config rtc: s5m: Add SPDX license identifier rtc: maxim: Add SPDX license identifiers rtc: isl1219: add device tree documentation rtc: isl1208: set ev-evienb bit from device tree rtc: isl1208: Add "evdet" interrupt source for isl1219 rtc: isl1208: add support for isl1219 with tamper detection rtc: sysfs: facilitate attribute add to rtc device rtc: remove struct rtc_task char: rtc: remove task handling rtc: pcf85063: preserve control register value between stop and start rtc: sh: remove unused variable rtc_dev rtc: unexport rtc_irq_set_* rtc: simplify rtc_irq_set_state/rtc_irq_set_freq rtc: remove irq_task and irq_task_lock rtc: remove rtc_irq_register/rtc_irq_unregister rtc: sh: remove dead code rtc: sa1100: don't set PIE frequency rtc: ds1307: support m41t11 variant rtc: ds1307: fix data pointer to m41t0 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatchingLinus Torvalds authored
Pull livepatching updates from Jiri Kosina: "Code cleanups from Kamalesh Babulal" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Validate module/old func name length livepatch: Remove reliable stacktrace check in klp_try_switch_task()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - touch_max detection improvements and quirk handling fixes in wacom driver from Jason Gerecke and Ping Cheng - Palm rejection from Dmitry Torokhov and _dial support from Benjamin Tissoires for hid-multitouch driver - Low voltage support for i2c-hid driver from Stephen Boyd - Guitar-Hero support from Nicolas Adenis-Lamarre - other assorted small fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits) HID: intel_ish-hid: tx_buf memory leak on probe/remove HID: intel-ish-hid: Prevent loading of driver on Mehlow HID: cougar: Add support for the Cougar 500k Gaming Keyboard HID: cougar: make compare_device_paths reusable HID: intel-ish-hid: remove redundant variable num_frags HID: multitouch: handle palm for touchscreens HID: multitouch: touchscreens also use confidence reports HID: multitouch: report MT_TOOL_PALM for non-confident touches HID: microsoft: support the Surface Dial HID: core: do not upper bound the collection stack HID: input: enable Totem on the Dell Canvas 27 HID: multitouch: remove one copy of values HID: multitouch: ditch mt_report_id HID: multitouch: store a per application quirks value HID: multitouch: Store per collection multitouch data HID: multitouch: make sure the static list of class is not changed input: add MT_TOOL_DIAL HID: elan: Add support for touchpad on the Toshiba Click Mini L9W HID: elan: Add USB-id for HP x2 10-n000nd touchpad HID: elan: Add a flag for selecting if the touchpad has a LED ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "Core Framework: - Remove unused/obsolete code/comments New Functionality: - Allow less granular brightness specification for high-res PWMs; pwm_bl - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl Fix-ups: - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl Bug Fixes: - Fix uninitialised variable; pwm_bl" * tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix uninitialized variable backlight: adp8860: Mark expected switch fall-through backlight: Remove obsolete comment for ->state dt-bindings: pwm-backlight: Move brightness-levels to optional backlight: pwm_bl: Compute brightness of LED linearly to human eye dt-bindings: pwm-backlight: Add a num-interpolation-steps property backlight: pwm_bl: Linear interpolation between brightness-levels
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from Takashi Iwai" * tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]
-
Joe Perches authored
Various architectures fail to build properly with older versions of the gcc compiler. An example from Guenter Roeck in thread [1]: > > In file included from ./include/linux/mm.h:17:0, > from ./include/linux/pid_namespace.h:7, > from ./include/linux/ptrace.h:10, > from arch/openrisc/kernel/asm-offsets.c:32: > ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct > > This is just an example with gcc 4.5.1 for or32. I have seen the problem > with gcc 4.4 (for unicore32) as well. So update the minimum required version of gcc to 4.6. [1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/ Miscellanea: - Update Documentation/process/changes.rst - Remove and consolidate version test blocks in compiler-gcc.h for versions lower than 4.6 Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tony Luck authored
Commit 0bbf47ea ("ia64: use asm-generic/io.h") results in a BUG while booting ia64. This is because asm-generic/io.h defines PCI_IOBASE, which results in the function acpi_pci_root_remap_iospace() doing a lot of unnecessary (and wrong) things. I'd suggested an #if !CONFIG_IA64 in the functon, but Arnd suggested keeping the fix inside the arch/ia64 tree. Fixes: 0bbf47ea ("ia64: use asm-generic/io.h") Suggested-by: Arnd Bergman <arnd@arndb.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Kosina authored
-
Jiri Kosina authored
Guitar-Hero devices support for hid-wiimote
-
Jiri Kosina authored
Wacom driver updates: - touch_max detection improvements - quirk handling cleanup - get rid of wacom custom usages
-
Jiri Kosina authored
Assorted small driver/core fixes.
-
Jiri Kosina authored
devm_* API conversion for hid-sony
-
Jiri Kosina authored
Multitouch updates: - Dial support - Palm rejection for touchscreens - a few small assorted fixes
-
Jiri Kosina authored
Device-specific fixes for hid-intel-ish
-
Jiri Kosina authored
Low voltage support for i2c-hid
-
Jiri Kosina authored
Resolution/pressure fixes and new device support for hid-elan
-
Jiri Kosina authored
New device support for hid-cougar
-
Wolfram Sang authored
When doing a REP_START after a read message, the driver used to trigger a STOP first which would then be overwritten by REP_START. This was the only stable method found when doing the last refactoring. However, this was not in accordance with the documentation. After research from our BSP team and myself, we now can implement a version which works and is according to the documentation. The new approach ensures the ICMCR register is only changed when really needed. Tested on a R-Car Gen2 (H2) and Gen3 with DMA (M3N). Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
Use BIT macro to avoid shift-31-problem, indent a little more and use GENMASK to make it easier to add new flags. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Hans de Goede authored
Currently acpi_gsb_i2c_read_bytes() directly returns i2c_transfer's return value. i2c_transfer returns a value < 0 on error and 2 (for 2 successfully executed transfers) on success. But the ACPI code expects 0 on success, so currently acpi_gsb_i2c_read_bytes()'s caller does: if (status > 0) status = 0; This commit makes acpi_gsb_i2c_read_bytes() return a value which can be directly consumed by the ACPI code, mirroring acpi_gsb_i2c_write_bytes(), this commit also makes acpi_gsb_i2c_read_bytes() explitcly check that i2c_transfer returns 2, rather then accepting any value > 0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Hans de Goede authored
acpi_gsb_i2c_write_bytes() returns i2c_transfer()'s return value, which is the number of transfers executed on success, so 1. The ACPI code expects us to store 0 in gsb->status for success, not 1. Specifically this breaks the following code in the Thinkpad 8 DSDT: ECWR = I2CW = ECWR /* \_SB_.I2C1.BAT0.ECWR */ If ((ECST == Zero)) { ECRD = I2CR /* \_SB_.I2C1.I2CR */ } Before this commit we set ECST to 1, causing the read to never happen breaking battery monitoring on the Thinkpad 8. This commit makes acpi_gsb_i2c_write_bytes() return 0 when i2c_transfer() returns 1, so the single write transfer completed successfully, and makes it return -EIO on for other (unexpected) return values >= 0. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Fabrizio Castro authored
Document RZ/G2M (R8A774A1) I2C compatibility with the relevant driver dt-bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Fabrizio Castro authored
Document RZ/G2M (R8A774A1) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Esben Haabendal authored
Always update the stopped state when busy status have been checked. This is identical to what was done before, with the exception of error handling. Without this change, some errors cause the stopped state to be left in incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and i2c_imx_xfer(). Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Esben Haabendal authored
This fixes a race condition, where the DMAEN bit ends up being set after I2C slave has transmitted a byte following the dummy read. When that happens, an interrupt is generated instead, and no DMA request is generated to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec). Fixed by setting the DMAEN bit before the dummy read. Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
Darren Stevens authored
The pasemi smbus controller uses PCI_FUNC(dev->devfn) to define which number bus to attach to, however this fails when something else is probed first, for example an ATI Radeon graphics card will claim 9 or 10 busses, including the ones the pasemi wants. Patch the driver to call i2c_add_adapter rather than i2c_add_numbered_adapter. Signed-off-by: Darren Stevens <darren@stevens-zone.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Andy Shevchenko authored
Replace short statement in comment with proper SPDX license tag. Note, for i2c-desingware-slave.c the identifier is chosen in accordance with MODULE_LICENSE() macro since it is visible to user. Another point to this choice is that the header seems to be copy'n'paste from the other file of this very driver. Acked-by: Luis Oliveira <Luis.Oliveira@synopsys.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 19 Aug, 2018 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu updates from Greg Ungerer: "Only two changes. One cleans up warnings in the ColdFire DMA code, the other stubs out (with warnings) ColdFire clock api functions not normally used" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: Fix typos in Coldfire 5272 DMA debug code m68k: coldfire: Normalize clk API
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix races in IPVS, from Tan Hu. 2) Missing unbind in matchall classifier, from Hangbin Liu. 3) Missing act_ife action release, from Vlad Buslov. 4) Cure lockdep splats in ila, from Cong Wang. 5) veth queue leak on link delete, from Toshiaki Makita. 6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From Kees Cook. 7) RCU usage fixup in XDP, from Tariq Toukan. 8) Two TCP ULP fixes from Daniel Borkmann. 9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner Kallweit. 10) Always take tcf_lock with BH disabled, otherwise we can deadlock with rate estimator code paths. From Vlad Buslov. 11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly. From Jian-Hong Pan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) ip6_vti: fix creating fallback tunnel device for vti6 ip_vti: fix a null pointer deferrence when create vti fallback tunnel r8169: don't use MSI-X on RTL8106e net: lan743x_ptp: convert to ktime_get_clocktai_ts64 net: sched: always disable bh when taking tcf_lock ip6_vti: simplify stats handling in vti6_xmit bpf: fix redirect to map under tail calls r8169: add missing Kconfig dependency tools/bpf: fix bpf selftest test_cgroup_storage failure bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist bpf, sockmap: fix map elem deletion race with smap_stop_sock bpf, sockmap: fix leakage of smap_psock_map_entry tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach tcp, ulp: add alias for all ulp modules bpf: fix a rcu usage warning in bpf_prog_array_copy_core() samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM net/xdp: Fix suspicious RCU usage warning net/mlx5e: Delete unneeded function argument Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb isdn: Disable IIOCDBGVAR ...
-
Haishuang Yan authored
When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel device for vti6 when a new namespace is created. Tested: [root@builder2 ~]# modprobe ip6_tunnel [root@builder2 ~]# modprobe ip6_vti [root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net [root@builder2 ~]# unshare -n [root@builder2 ~]# ip link 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-