- 12 Apr, 2016 37 commits
-
-
Rusty Russell authored
[ Upstream commit 2e7bac53 ] This trivial wrapper adds clarity and makes the following patch smaller. Cc: stable@kernel.org Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Akinobu Mita authored
[ Upstream commit 431386e7 ] According to the datasheet, the resolusion of temperature sensor is -5.35 counts/C. Temperature ADC is 472 counts at 25C. (https://www.sparkfun.com/datasheets/Sensors/Pressure/MPL115A1.pdf NOTE: This is older revision, but this information is removed from the latest datasheet from nxp somehow) Temp [C] = (Tadc - 472) / -5.35 + 25 = (Tadc - 605.750000) * -0.186915888 So the correct offset is -605.750000. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Yong Li authored
[ Upstream commit 97a249e9 ] Without this change, the name entity for mcp4725 is missing in /sys/bus/iio/devices/iio\:device*/name With this change, name is reported correctly Signed-off-by:
Yong Li <sdliyong@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit d590faf9 ] The SPI tx and rx buffers are both supposed to be scan_bytes amount of bytes large and a common allocation is used to allocate both buffers. This puts the beginning of the tx buffer scan_bytes bytes after the rx buffer. The initialization of the tx buffer pointer is done adding scan_bytes to the beginning of the rx buffer, but since the rx buffer is of type __be16 this will actually add two times as much and the tx buffer ends up pointing after the allocated buffer. Fix this by using scan_count, which is scan_bytes / 2, instead of scan_bytes when initializing the tx buffer pointer. Fixes: aacff892 ("staging:iio:adis: Preallocate transfer message") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Jann Horn authored
[ Upstream commit caaee623 ] By checking the effective credentials instead of the real UID / permitted capabilities, ensure that the calling process actually intended to use its credentials. To ensure that all ptrace checks use the correct caller credentials (e.g. in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS flag), use two new flags and require one of them to be set. The problem was that when a privileged task had temporarily dropped its privileges, e.g. by calling setreuid(0, user_uid), with the intent to perform following syscalls with the credentials of a user, it still passed ptrace access checks that the user would not be able to pass. While an attacker should not be able to convince the privileged task to perform a ptrace() syscall, this is a problem because the ptrace access check is reused for things in procfs. In particular, the following somewhat interesting procfs entries only rely on ptrace access checks: /proc/$pid/stat - uses the check for determining whether pointers should be visible, useful for bypassing ASLR /proc/$pid/maps - also useful for bypassing ASLR /proc/$pid/cwd - useful for gaining access to restricted directories that contain files with lax permissions, e.g. in this scenario: lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar drwx------ root root /root drwxr-xr-x root root /root/foobar -rw-r--r-- root root /root/foobar/secret Therefore, on a system where a root-owned mode 6755 binary changes its effective credentials as described and then dumps a user-specified file, this could be used by an attacker to reveal the memory layout of root's processes or reveal the contents of files he is not allowed to access (through /proc/$pid/cwd). [akpm@linux-foundation.org: fix warning] Signed-off-by:
Jann Horn <jann@thejh.net> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 73e7d63e ] as reported by https://bugzilla.kernel.org/show_bug.cgi?id=108481 This bug reports mentions 6d4f5440 ("HID: multitouch: Fetch feature reports on demand for Win8 devices") as the origin of the problem but this commit actually masked 2 firmware bugs that are annihilating each other: The report descriptor declares two features in reports 3 and 5: 0x05, 0x0d, // Usage Page (Digitizers) 318 0x09, 0x0e, // Usage (Device Configuration) 320 0xa1, 0x01, // Collection (Application) 322 0x85, 0x03, // Report ID (3) 324 0x09, 0x22, // Usage (Finger) 326 0xa1, 0x00, // Collection (Physical) 328 0x09, 0x52, // Usage (Inputmode) 330 0x15, 0x00, // Logical Minimum (0) 332 0x25, 0x0a, // Logical Maximum (10) 334 0x75, 0x08, // Report Size (8) 336 0x95, 0x02, // Report Count (2) 338 0xb1, 0x02, // Feature (Data,Var,Abs) 340 0xc0, // End Collection 342 0x09, 0x22, // Usage (Finger) 343 0xa1, 0x00, // Collection (Physical) 345 0x85, 0x05, // Report ID (5) 347 0x09, 0x57, // Usage (Surface Switch) 349 0x09, 0x58, // Usage (Button Switch) 351 0x15, 0x00, // Logical Minimum (0) 353 0x75, 0x01, // Report Size (1) 355 0x95, 0x02, // Report Count (2) 357 0x25, 0x03, // Logical Maximum (3) 359 0xb1, 0x02, // Feature (Data,Var,Abs) 361 0x95, 0x0e, // Report Count (14) 363 0xb1, 0x03, // Feature (Cnst,Var,Abs) 365 0xc0, // End Collection 367 The report ID 3 presents 2 input mode features, while only the first one is handled by the device. Given that we did not checked if one was previously assigned, we were dealing with the ignored featured and we should never have been able to switch this panel into the multitouch mode. However, the firmware presents an other bugs which allowed 6d4f5440 to counteract the faulty report descriptor. When we request the values of the feature 5, the firmware answers "03 03 00". The fields are correct but the report id is wrong. Before 6d4f5440, we retrieved all the features and injected them in the system. So when we called report 5, we injected in the system the report 3 with the values "03 00". Setting the second input mode to 03 in this report changed it to "03 03" and the touchpad switched to the mt mode. We could have set anything in the second field because the actual value (the first 03 in this report) was given by the query of report ID 5. To sum up: 2 bugs in the firmware were hiding that we were accessing the wrong feature. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Raghavendra K T authored
[ Upstream commit 9c03ee14 ] The following PowerPC commit: c118baf8 ("arch/powerpc/mm/numa.c: do not allocate bootmem memory for non existing nodes") avoids allocating bootmem memory for non existent nodes. But when DEBUG_PER_CPU_MAPS=y is enabled, my powerNV system failed to boot because in sched_init_numa(), cpumask_or() operation was done on unallocated nodes. Fix that by making cpumask_or() operation only on existing nodes. [ Tested with and w/o DEBUG_PER_CPU_MAPS=y on x86 and PowerPC. ] Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: <gkurz@linux.vnet.ibm.com> Cc: <grant.likely@linaro.org> Cc: <nikunj@linux.vnet.ibm.com> Cc: <vdavydov@parallels.com> Cc: <linuxppc-dev@lists.ozlabs.org> Cc: <linux-mm@kvack.org> Cc: <peterz@infradead.org> Cc: <benh@kernel.crashing.org> Cc: <paulus@samba.org> Cc: <mpe@ellerman.id.au> Cc: <anton@samba.org> Link: http://lkml.kernel.org/r/1452884483-11676-1-git-send-email-raghavendra.kt@linux.vnet.ibm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit e7fdd527 ] Many codecs, typically found on Realtek codecs, have the analog loopback path merged to the secondary input of the middle of the output paths. Currently, we don't offer the dynamic switching in such configuration but let each loopback path mute by itself. This should work well in theory, but in reality, we often see that such a dead loopback path causes some background noises even if all the elements get muted. Such a problem has been fixed by adding the quirk accordingly to disable aamix, and it's the right fix, per se. The only problem is that it's not so trivial to achieve it; user needs to pass a hint string via patch module option or sysfs. This patch gives a bit improvement on the situation: it adds "Loopback Mixing" control element for such codecs like other codecs (e.g. IDT or VIA codecs) with the individual loopback paths. User can turn on/off the loopback path simply via a mixer app. For keeping the compatibility, the loopback is still enabled on these codecs. But user can try to turn it off if experiencing a suspicious background or click noise on the fly, then build a static fixup later once after the problem is addressed. Other than the addition of the loopback enable/disablement control, there should be no changes. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Johan Rastén authored
[ Upstream commit 27c41dad ] Changed ctl type for Input Gain Control and Input Gain Pad Control to USB_MIXER_S16 as per section 5.2.5.7.11-12 in the USB Audio Class 2.0 definition. Signed-off-by:
Johan Rastén <johan@oljud.se> Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 4392bf33 ] hid_ignore_special_drivers works fine until hid_scan_report autodetects and reassign devices (for hid-multitouch, hid-microsoft and hid-rmi). Simplify the handling of the parameter: if it is there, use hid-generic, no matter what, and if not, scan the device or rely on the hid_have_special_driver table. This was detected while trying to disable hid-multitouch on a Surface Pro cover which prevented to use the keyboard. Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 9578f41a ] This allows the transport layer (I have in mind hid-logitech-dj and uhid) to set the group before it is added to the hid bus. This way, it can bypass the hid_scan_report() call, and choose in advance which driver will handle the newly created hid device. Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 264904cc ] Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by:
Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Lior Amsalem authored
[ Upstream commit b3a7f31e ] The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which requires the PHY speed to be set in the LP_PHY_CTL register for SATA hotplug to work. Therefore, this commit updates the compatible string used to describe the SATA IP in Armada 375 from marvell,orion-sata to marvell,armada-370-sata. Fixes: 4de59085 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Cc: <stable@vger.kernel.org> Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Kamal Mostafa authored
[ Upstream commit 50fe6dd1 ] Use the local uapi headers to keep in sync with "recently" added #define's (e.g. VSS_OP_REGISTER1). Fixes: 3eb2094c ("Adding makefile for tools/hv") Cc: <stable@vger.kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Matej Muzila authored
[ Upstream commit ca04455f ] hv_fcopy_daemon is not mentioned in Makefile so it must be built manually. Add hv_fcopy_daemon to Makefile. Signed-off-by:
Matej Muzila <mmuzila@redhat.com> Signed-off-by:
-
Spencer E. Olson authored
[ Upstream commit 1fd24a47 ] This fixes a bug in function ni_tio_input_inttrig(). The trigger number should be compared to cmd->start_arg, not cmd->start_src. Fixes: 6a760394 ("staging: comedi: ni_tiocmd: clarify the cmd->start_arg validation and use") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by:
Spencer E. Olson <olsonse@umich.edu> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Peter Hurley authored
[ Upstream commit 401879c5 ] The N_IRDA line discipline may access the previous line discipline's closed and already-fre private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] ================================================================== BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068 Read of size 4 by task a.out/13960 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- ... Call Trace: [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279 [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436 [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447 [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607 [< inline >] SYSC_ioctl fs/ioctl.c:622 [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613 [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a Reported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit b31dde2a ] Use a local variable for the exported and imported state so that alignment is not an issue. On export, set a local variable from the request context and then memcpy the contents of the local variable to the export memory area. On import, memcpy the import memory area into a local variable and then use the local variable to set the request context. Cc: <stable@vger.kernel.org> # 3.14.x- Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit d1662165 ] Since the exported information can be exposed to user-space, instead of exporting the entire request context only export the minimum information needed. Cc: <stable@vger.kernel.org> # 3.14.x- Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 7445e45d ] SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.html Cc: stable@vger.kernel.org Reported-by:
Kikim <klucznik0@op.pl> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Tiffany Lin authored
[ Upstream commit 7df5ab87 ] In v4l2-compliance utility, test QUERYBUF required correct length value to go through each planar to check planar's length in multi-planar buffer type Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v3.7 and up Signed-off-by:
-
Peter Hurley authored
[ Upstream commit f33798de ] commit 9ce119f3 ("tty: Fix GPF in flush_to_ldisc()") fixed a GPF caused by a line discipline which does not define a receive_buf() method. However, the vt driver (and speakup driver also) pushes selection data directly to the line discipline receive_buf() method via tty_ldisc_receive_buf(). Fix the same problem in tty_ldisc_receive_buf(). Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit 952bce97 ] Commit 8996eafd ("crypto: ahash - ensure statesize is non-zero") added a check to prevent ahash algorithms from successfully registering if the import and export functions were not implemented. This prevents an oops in the hash_accept function of algif_hash. This commit causes the ccp-crypto module SHA support and AES CMAC support from successfully registering and causing the ccp-crypto module load to fail because the ahash import and export functions are not implemented. Update the CCP Crypto API support to provide import and export support for ahash algorithms. Cc: <stable@vger.kernel.org> # 3.14.x- Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 6f3508f6 ] dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5 ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwandaSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Roman Gushchin authored
[ Upstream commit 3ca8138f ] I got a report about unkillable task eating CPU. Further investigation shows, that the problem is in the fuse_fill_write_pages() function. If iov's first segment has zero length, we get an infinite loop, because we never reach iov_iter_advance() call. Fix this by calling iov_iter_advance() before repeating an attempt to copy data from userspace. A similar problem is described in 124d3b70 ("fix writev regression: pan hanging unkillable and un-straceable"). If zero-length segmend is followed by segment with invalid address, iov_iter_fault_in_readable() checks only first segment (zero-length), iov_iter_copy_from_user_atomic() skips it, fails at second and returns zero -> goto again without skipping zero-length segment. Patch calls iov_iter_advance() before goto again: we'll skip zero-length segment at second iteraction and iov_iter_fault_in_readable() will detect invalid address. Special thanks to Konstantin Khlebnikov, who helped a lot with the commit description. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Maxim Patlasov <mpatlasov@parallels.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Fixes: ea9b9907 ("fuse: implement perform_write") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit acff81ec ] [Al Viro] The bug is in being too enthusiastic about optimizing ->setattr() away - instead of "copy verbatim with metadata" + "chmod/chown/utimes" (with the former being always safe and the latter failing in case of insufficient permissions) it tries to combine these two. Note that copyup itself will have to do ->setattr() anyway; _that_ is where the elevated capabilities are right. Having these two ->setattr() (one to set verbatim copy of metadata, another to do what overlayfs ->setattr() had been asked to do in the first place) combined is where it breaks. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Andreas Schwab authored
[ Upstream commit f15838e9 ] Since binutils 2.26 BFD is doing suffix merging on STRTAB sections. But dedotify modifies the symbol names in place, which can also modify unrelated symbols with a name that matches a suffix of a dotted name. To remove the leading dot of a symbol name we can just increment the pointer into the STRTAB section instead. Backport to all stables to avoid breakage when people update their binutils - mpe. Cc: stable@vger.kernel.org Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 36e5cd6b ] Commit dfd55ad8 ("arm64: vmemmap: use virtual projection of linear region") fixed an issue where the struct page array would overflow into the adjacent virtual memory region if system RAM was placed so high up in physical memory that its addresses were not representable in the build time configured virtual address size. However, the fix failed to take into account that the vmemmap region needs to be relatively aligned with respect to the sparsemem section size, so that a sequence of page structs corresponding with a sparsemem section in the linear region appears naturally aligned in the vmemmap region. So round up vmemmap to sparsemem section size. Since this essentially moves the projection of the linear region up in memory, also revert the reduction of the size of the vmemmap region. Cc: <stable@vger.kernel.org> Fixes: dfd55ad8 ("arm64: vmemmap: use virtual projection of linear region") Tested-by:
Mark Langsdorf <mlangsdo@redhat.com> Tested-by:
David Daney <david.daney@cavium.com> Tested-by:
Robert Richter <rrichter@cavium.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit dfd55ad8 ] Commit dd006da2 ("arm64: mm: increase VA range of identity map") made some changes to the memory mapping code to allow physical memory to reside at an offset that exceeds the size of the virtual mapping. However, since the size of the vmemmap area is proportional to the size of the VA area, but it is populated relative to the physical space, we may end up with the struct page array being mapped outside of the vmemmap region. For instance, on my Seattle A0 box, I can see the following output in the dmesg log. vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 0xffffffbfc0000000 - 0xffffffbfd0000000 ( 256 MB actual) We can fix this by deciding that the vmemmap region is not a projection of the physical space, but of the virtual space above PAGE_OFFSET, i.e., the linear region. This way, we are guaranteed that the vmemmap region is of sufficient size, and we can even reduce the size by half. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andrey Grodzovsky authored
[ Upstream commit c175cd16 ] On DELL U3014 if you clear the table before enabling MST it sometimes hangs the receiver. Signed-off-by:
Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Hersen Wu authored
[ Upstream commit 5e93b820 ] Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
Sekhar Nori authored
[ Upstream commit d3b421cd ] Under some conditions, irq sorting procedure used by INTC can go wrong resulting in a spurious irq getting reported. If this condition is not handled, it results in endless stream of: unexpected IRQ trap at vector 00 messages from ack_bad_irq() Handle the spurious interrupt condition in omap-intc driver to prevent this. Measurements using kernel function profiler on AM335x EVM running at 720MHz show that after this patch omap_intc_handle_irq() takes about 37.4us against 34us before this patch. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.com Cc: stable@vger.kernel.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 6ed34648 ] As it turns out the current IRQ number will *always* be available from SIR register which renders the reads of PENDING registers as plain unnecessary overhead. In order to catch any situation where SIR reads as zero, we're adding a WARN() to turn it into a very verbose error and users actually report it. With this patch average running time of omap_intc_handle_irq() reduced from about 28.5us to 19.8us as measured by the kernel function profiler. Tested with BeagleBoneBlack Rev A5C. Tested-by:
Felipe Balbi <balbi@ti.com> Cc: Linux ARM Kernel Mailing List <linux-arm-kernel@lists.infradead.org> Link: http://lkml.kernel.org/r/20150720204910.GH5394@saruman.tx.rr.comSigned-off-by:
-
Rich Felker authored
[ Upstream commit 114bf37e ] Add Yoshinori Sato and Rich Felker as maintainers for arch/sh (SUPERH). Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by:
D. Jeff Dionne <jeff@uClinux.org> Acked-by:
Rob Landley <rob@landley.net> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: <stable@vger.kernel.org> Signed-off-by:
-
David Henningsson authored
[ Upstream commit 56f27013 ] Inform userspace that one channel of the internal mic has reversed polarity, so it does not attempt to add both channels together and end up with silence. Cc: stable@vger.kernel.org Reported-by:
Andrzej Mendel <andrzej.mendel@gmail.com> Alsa-info: http://www.alsa-project.org/db/?f=3088f82a0cf977855f92af9db8ad406c04f71efa BugLink: https://bugs.launchpad.net/bugs/1529624Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit a0a2a660 ] The commit 738ac1eb ("net: Clone skb before setting peeked flag") introduced a use-after-free bug in skb_recv_datagram. This is because skb_set_peeked may create a new skb and free the existing one. As it stands the caller will continue to use the old freed skb. This patch fixes it by making skb_set_peeked return the new skb (or the old one if unchanged). Fixes: 738ac1eb ("net: Clone skb before setting peeked flag") Reported-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 738ac1eb ] Shared skbs must not be modified and this is crucial for broadcast and/or multicast paths where we use it as an optimisation to avoid unnecessary cloning. The function skb_recv_datagram breaks this rule by setting peeked without cloning the skb first. This causes funky races which leads to double-free. This patch fixes this by cloning the skb and replacing the skb in the list when setting skb->peeked. Fixes: a59322be ("[UDP]: Only increment counter on first peek/recv") Reported-by:
-
- 07 Apr, 2016 1 commit
-
-
Andy Lutomirski authored
commit b7a58459 upstream. On Xen PV, regs->flags doesn't reliably reflect IOPL and the exit-to-userspace code doesn't change IOPL. We need to context switch it manually. I'm doing this without going through paravirt because this is specific to Xen PV. After the dust settles, we can merge this with the 32-bit code, tidy up the iopl syscall implementation, and remove the set_iopl pvop entirely. Fixes XSA-171. Reviewewd-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/693c3bd7aeb4d3c27c92c622b7d0f554a458173c.1458162709.git.luto@kernel.orgSigned-off-by:
-
- 03 Apr, 2016 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 29 Mar, 2016 1 commit
-
-
Will Deacon authored
[ Upstream commit f5e0a12c ] An arm64 allmodconfig fails to build with GCC 5 due to __asmeq assertions in the PSCI firmware calling code firing due to mcount preambles breaking our assumptions about register allocation of function arguments: /tmp/ccDqJsJ6.s: Assembler messages: /tmp/ccDqJsJ6.s:60: Error: .err encountered /tmp/ccDqJsJ6.s:61: Error: .err encountered /tmp/ccDqJsJ6.s:62: Error: .err encountered /tmp/ccDqJsJ6.s:99: Error: .err encountered /tmp/ccDqJsJ6.s:100: Error: .err encountered /tmp/ccDqJsJ6.s:101: Error: .err encountered This patch fixes the issue by moving the PSCI calls out-of-line into their own assembly files, which are safe from the compiler's meddling fingers. Reported-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
