Merge tag 'regulator-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two fixes here, one from Johan which fixes error handling when we
  attempt to create duplicate debugfs files and one for an incorrect
  specification of ramp_delay with the rtq2208"

* tag 'regulator-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: fix debugfs creation regression
  regulator: rtq2208: Fix the BUCK ramp_delay range to maximum of 16mVstep/us

Pull timer fix from Ingo Molnar:
 "Fix possible (but unlikely) out-of-bounds access in the timer
  migration per-CPU-init code"

* tag 'timers-urgent-2024-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Prevent out of bounds access on failure

Pull iommu fixes from Joerg Roedel:

 - Fix offset miscalculation on ARM-SMMU driver

 - AMD IOMMU fix for initializing state of untrusted devices

* tag 'iommu-fixes-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault()
  iommu/amd: Enhance def_domain_type to handle untrusted device

This was missed because of the function pointer indirection.

nvidia_smmu_context_fault() is also installed as a irq function, and the
'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain
is embedded at a non-zero offset this causes nvidia_smmu_context_fault()
to miscompute the offset. Fixup the types.

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120
  Mem abort info:
    ESR = 0x0000000096000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
    FSC = 0x04: level 0 translation fault
  Data abort info:
    ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
    CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
  user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000
  [0000000000000120] pgd=0000000000000000, p4d=0000000000000000
  Internal error: Oops: 0000000096000004 [#1] SMP
  Modules linked in:
  CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1
  Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023
  Workqueue: events_unbound deferred_probe_work_func
  pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : nvidia_smmu_context_fault+0x1c/0x158
  lr : __free_irq+0x1d4/0x2e8
  sp : ffff80008044b6f0
  x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970
  x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30
  x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000
  x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff
  x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888
  x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0
  x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c
  x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f
  x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000
  x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057
  Call trace:
   nvidia_smmu_context_fault+0x1c/0x158
   __free_irq+0x1d4/0x2e8
   free_irq+0x3c/0x80
   devm_free_irq+0x64/0xa8
   arm_smmu_domain_free+0xc4/0x158
   iommu_domain_free+0x44/0xa0
   iommu_deinit_device+0xd0/0xf8
   __iommu_group_remove_device+0xcc/0xe0
   iommu_bus_notifier+0x64/0xa8
   notifier_call_chain+0x78/0x148
   blocking_notifier_call_chain+0x4c/0x90
   bus_notify+0x44/0x70
   device_del+0x264/0x3e8
   pci_remove_bus_device+0x84/0x120
   pci_remove_root_bus+0x5c/0xc0
   dw_pcie_host_deinit+0x38/0xe0
   tegra_pcie_config_rp+0xc0/0x1f0
   tegra_pcie_dw_probe+0x34c/0x700
   platform_probe+0x70/0xe8
   really_probe+0xc8/0x3a0
   __driver_probe_device+0x84/0x160
   driver_probe_device+0x44/0x130
   __device_attach_driver+0xc4/0x170
   bus_for_each_drv+0x90/0x100
   __device_attach+0xa8/0x1c8
   device_initial_probe+0x1c/0x30
   bus_probe_device+0xb0/0xc0
   deferred_probe_work_func+0xbc/0x120
   process_one_work+0x194/0x490
   worker_thread+0x284/0x3b0
   kthread+0xf4/0x108
   ret_from_fork+0x10/0x20
  Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1)

Cc: stable@vger.kernel.org
Fixes: e0976331 ("iommu/arm-smmu: Pass arm_smmu_domain to internal functions")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Closes: https://lore.kernel.org/all/jto5e3ili4auk6sbzpnojdvhppgwuegir7mpd755anfhwcbkfz@2u5gh7bxb4ivSigned-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v1-24ce064de41f+4ac-nvidia_smmu_fault_jgg@nvidia.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Merge tag 'hwmon-for-v6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - pmbus/ucd9000: Increase chip access delay to avoid random access
   errors

 - corsair-cpro: Protect kernel code against parallel hidraw access from
   userspace

* tag 'hwmon-for-v6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/ucd9000) Increase delay from 250 to 500us
  hwmon: (corsair-cpro) Protect ccp->wait_input_report with a spinlock
  hwmon: (corsair-cpro) Use complete_all() instead of complete() in ccp_raw_event()
  hwmon: (corsair-cpro) Use a separate buffer for sending commands

Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.

To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e65 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and IPsec.

  The bridge patch is actually a follow-up to a recent fix in the same
  area. We have a pending v6.8 AF_UNIX regression; it should be solved
  soon, but not in time for this PR.

  Current release - regressions:

   - eth: ks8851: Queue RX packets in IRQ handler instead of disabling
     BHs

   - net: bridge: fix corrupted ethernet header on multicast-to-unicast

  Current release - new code bugs:

   - xfrm: fix possible bad pointer derferencing in error path

  Previous releases - regressionis:

   - core: fix out-of-bounds access in ops_init

   - ipv6:
      - fix potential uninit-value access in __ip6_make_skb()
      - fib6_rules: avoid possible NULL dereference in fib6_rule_action()

   - tcp: use refcount_inc_not_zero() in tcp_twsk_unique().

   - rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation

   - rxrpc: fix congestion control algorithm

   - bluetooth:
      - l2cap: fix slab-use-after-free in l2cap_connect()
      - msft: fix slab-use-after-free in msft_do_close()

   - eth: hns3: fix kernel crash when devlink reload during
     initialization

   - eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
     family

  Previous releases - always broken:

   - xfrm: preserve vlan tags for transport mode software GRO

   - tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets

   - eth: hns3: keep using user config after hardware reset"

* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
  net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
  net: hns3: fix kernel crash when devlink reload during initialization
  net: hns3: fix port vlan filter not disabled issue
  net: hns3: use appropriate barrier function after setting a bit value
  net: hns3: release PTP resources if pf initialization failed
  net: hns3: change type of numa_node_mask as nodemask_t
  net: hns3: direct return when receive a unknown mailbox message
  net: hns3: using user configure after hardware reset
  net/smc: fix neighbour and rtable leak in smc_ib_find_route()
  ipv6: prevent NULL dereference in ip6_output()
  hsr: Simplify code for announcing HSR nodes timer setup
  ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
  dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
  rxrpc: Only transmit one ACK per jumbo packet received
  rxrpc: Fix congestion control algorithm
  selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
  ipv6: Fix potential uninit-value access in __ip6_make_skb()
  net: phy: marvell-88q2xxx: add support for Rev B1 and B2
  appletalk: Improve handling of broadcast packets
  ...

Pull ARM fix from Russell King:

 - clear stale KASan stack poison when a CPU resumes

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9381/1: kasan: clear stale stack poison

regulator_get() may sometimes be called more than once for the same
consumer device, something which before commit dbe954d8 ("regulator:
core: Avoid debugfs: Directory ...  already present! error") resulted in
errors being logged.

A couple of recent commits broke the handling of such cases so that
attributes are now erroneously created in the debugfs root directory the
second time a regulator is requested and the log is filled with errors
like:

	debugfs: File 'uA_load' in directory '/' already present!
	debugfs: File 'min_uV' in directory '/' already present!
	debugfs: File 'max_uV' in directory '/' already present!
	debugfs: File 'constraint_flags' in directory '/' already present!

on any further calls.

Fixes: 2715bb11 ("regulator: core: Fix more error checking for debugfs_create_dir()")
Fixes: 08880713 ("regulator: core: Streamline debugfs operations")
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240509133304.8883-1-johan+linaro@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Pull dentry leak fix from Al Viro:
 "Dentry leak fix in the qibfs driver that I forgot to send a pull
  request for ;-/

  My apologies - it actually sat in vfs.git#fixes for more than two
  months..."

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qibfs: fix dentry leak

On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports.
Modified the mv88e6352_get_port4_serdes_cmode function to pass a port
number since the register set of the 6352 is equal on the 6320/21.
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

As of commit de5c9bf4 ("net: phylink: require supported_interfaces to
be filled")
Marvell 88e6320/21 switches fail to be probed:

...
mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
...

The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.

Fixes: de5c9bf4 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://lore.kernel.org/r/20240507134224.2646246-1-shaojijie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.

This patch fixes this by registering the devlink after
hardware initialization.

Fixes: cd624299 ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77 ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state,  and the port VLAN filter
remains enabled.

To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".

Fixes: 184cd221 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba30662 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().

          CPU0                        CPU1
========================== ===================================
hclgevf_set_timer_task()    hclgevf_periodic_service_task()
  set_bit(DOWN,state)         test_bit(DOWN,state)

pf also has this issue.

Fixes: ff200099 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6f ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point,  the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.

Fixes: eaf83ae5 ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.

Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.

Fixes: bb5790b7 ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:

+------+               +----+                +----+
| USER |               | PF |                | HW |
+---+--+               +-+--+                +-+--+
    |  ethtool --reset   |                     |
    +------------------->|    reset command    |
    |  ethtool --reset   +-------------------->|
    +------------------->|                     +---+
    |                    +---+                 |   |
    |                    |   |reset currently  |   | HW RESET
    |                    |   |and wait to do   |   |
    |                    |<--+                 |   |
    |                    | send pervious cfg   |<--+
    |                    | (1000M FULL AN_ON)  |
    |                    +-------------------->|
    |                    | read cfg(time task) |
    |                    | (10M HALF AN_OFF)   +---+
    |                    |<--------------------+   | cfg take effect
    |                    |    reset command    |<--+
    |                    +-------------------->|
    |                    |                     +---+
    |                    | send pervious cfg   |   | HW RESET
    |                    | (10M HALF AN_OFF)   |<--+
    |                    +-------------------->|
    |                    | read cfg(time task) |
    |                    |  (10M HALF AN_OFF)  +---+
    |                    |<--------------------+   | cfg take effect
    |                    |                     |   |
    |                    | read cfg(time task) |<--+
    |                    |  (10M HALF AN_OFF)  |
    |                    |<--------------------+
    |                    |                     |
    v                    v                     v

To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration

Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.

Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com
Fixes: e5c4744c ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

According to syzbot, there is a chance that ip6_dst_idev()
returns NULL in ip6_output(). Most places in IPv6 stack
deal with a NULL idev just fine, but not here.

syzbot reported:

general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7]
CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237
Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff
RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202
RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000
RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48
RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad
R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0
R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000
FS:  00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358
  sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248
  sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653
  sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783
  sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline]
  sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212
  sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
  sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169
  sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73
  __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234
  sctp_connect net/sctp/socket.c:4819 [inline]
  sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
  __sys_connect_file net/socket.c:2048 [inline]
  __sys_connect+0x2df/0x310 net/socket.c:2065
  __do_sys_connect net/socket.c:2075 [inline]
  __se_sys_connect net/socket.c:2072 [inline]
  __x64_sys_connect+0x7a/0x90 net/socket.c:2072
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 778d80be ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.

This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.

This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.

The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.

Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot is able to trigger the following crash [1],
caused by unsafe ip6_dst_idev() use.

Indeed ip6_dst_idev() can return NULL, and must always be checked.

[1]

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline]
 RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267
Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c
RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700
RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760
RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd
R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000
R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00
FS:  00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317
  fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108
  ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline]
  ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649
  ip6_route_output include/net/ip6_route.h:93 [inline]
  ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120
  ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250
  sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326
  sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455
  sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662
  sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099
  __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197
  sctp_connect net/sctp/socket.c:4819 [inline]
  sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
  __sys_connect_file net/socket.c:2048 [inline]
  __sys_connect+0x2df/0x310 net/socket.c:2065
  __do_sys_connect net/socket.c:2075 [inline]
  __se_sys_connect net/socket.c:2072 [inline]
  __x64_sys_connect+0x7a/0x90 net/socket.c:2072
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 5e5f3f0f ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.

This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.

Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.

Fixes: c94a9aab ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull smb server fixes from Steve French:
 "Five ksmbd server fixes, all also for stable

   - Three fixes related to SMB3 leases (fixes two xfstests, and a
     locking issue)

   - Unitialized variable fix

   - Socket creation fix when bindv6only is set"

* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: do not grant v2 lease if parent lease key and epoch are not set
  ksmbd: use rwsem instead of rwlock for lease break
  ksmbd: avoid to send duplicate lease break notifications
  ksmbd: off ipv6only for both ipv4/ipv6 binding
  ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()

Pull fuse fixes from Miklos Szeredi:
 "Two one-liner fixes for issues introduced in -rc1"

* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  virtiofs: include a newline in sysfs tag
  fuse: verify zero padding in fuse_backing_map

Pull exfat fixes from Namjae Jeon:

 - Fix xfstests generic/013 test failure with dirsync mount option

 - Initialize the reserved fields of deleted file and stream extension
   dentries to zero

* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: zero the reserved fields of file and stream extension dentries
  exfat: fix timing of synchronizing bitmap and inode

Pull bcachefs fixes from Kent Overstreet:

 - Various syzbot fixes; mainly small gaps in validation

 - Fix an integer overflow in fiemap() which was preventing filefrag
   from returning the full list of extents

 - Fix a refcounting bug on the device refcount, turned up by new
   assertions in the development branch

 - Fix a device removal/readd bug; write_super() was repeatedly dropping
   and retaking bch_dev->io_ref references

* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
  bcachefs: Fix race in bch2_write_super()
  bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
  bcachefs: Add missing skcipher_request_set_callback() call
  bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
  bcachefs: Fix shift-by-64 in bformat_needs_redo()
  bcachefs: Guard against unknown k.k->type in __bkey_invalid()
  bcachefs: Add missing validation for superblock section clean
  bcachefs: Fix assert in bch2_alloc_v4_invalid()
  bcachefs: fix overflow in fiemap
  bcachefs: Add a better limit for maximum number of buckets
  bcachefs: Fix lifetime issue in device iterator helpers
  bcachefs: Fix bch2_dev_lookup() refcounting
  bcachefs: Initialize bch_write_op->failed in inline data path
  bcachefs: Fix refcount put in sb_field_resize error path
  bcachefs: Inodes need extra padding for varint_decode_fast()
  bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
  bcachefs: bucket_pos_to_bp_noerror()
  bcachefs: don't free error pointers
  bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()

Pull ARM SoC fixes from Arnd Bergmann:
 "These are a couple of last minute fixes that came in over the previous
  week, addressing:

   - A pin configuration bug on a qualcomm board that caused issues with
     ethernet and mmc

   - Two minor code fixes for misleading console output in the microchip
     firmware driver

   - A build warning in the sifive cache driver"

* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  firmware: microchip: clarify that sizes and addresses are in hex
  firmware: microchip: don't unconditionally print validation success
  arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
  cache: sifive_ccache: Silence unused variable warning

Pull pci fixes from Bjorn Helgaas:

 - Update kernel-parameters doc to describe "pcie_aspm=off" more
   accurately (Bjorn Helgaas)

 - Restore the parent's (not the child's) ASPM state to the parent
   during resume, which fixes a reboot during resume (Kai-Heng Feng)

* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI/ASPM: Restore parent state to parent, child state to child
  PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched

David Howells says:

====================
rxrpc: Miscellaneous fixes (part)

Here some miscellaneous fixes for AF_RXRPC:

 (1) Fix the congestion control algorithm to start cwnd at 4 and to not cut
     ssthresh when the peer cuts its rwind size.

 (2) Only transmit a single ACK for all the DATA packets glued together
     into a jumbo packet to reduce the number of ACKs being generated.
====================

Link: https://lore.kernel.org/r/20240503150749.1001323-1-dhowells@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Only generate one ACK packet for all the subpackets in a jumbo packet.  If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:

   OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle

For the first four, we reference the lowest offending subpacket; for the
last three, the highest.

This reduces the number of ACKs we end up transmitting to one per UDP
packet transmitted to reduce network loading and packet parsing.

Fixes: 5d7edbc9 ("rxrpc: Get rid of the Rx ring")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman &lt;jaltman@auristor.com <mailto:jaltman@auristor.com&gt;>
Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make the following fixes to the congestion control algorithm:

 (1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
     that's currently held constant - set to the size of a jumbo subpacket
     payload so that we can create jumbo packets on the fly.  The current
     code invariably picks 3 as the starting value.

     Further, the starting cwnd needs to be an even number because we ack
     every other packet, so set it to 4.

 (2) Don't cut ssthresh when we see an ACK come from the peer with a
     receive window (rwind) less than ssthresh.  ssthresh keeps track of
     characteristics of the connection whereas rwind may be reduced by the
     peer for any reason - and may be reduced to 0.

Fixes: 1fc4fa2a ("rxrpc: Fix congestion management")
Fixes: 08511150 ("rxrpc: Reduce ssthresh to peer's receive window")
Signed-off-by: David Howells <dhowells@redhat.com>
Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman &lt;jaltman@auristor.com <mailto:jaltman@auristor.com&gt;>
Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.

On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.

Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240426074015.251854d4@kernel.org/
Fixes: 7648ac72 ("selftests: net: Add bridge neighbor suppression test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As it was done in commit fc1092f5 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.

Fixes: ea30388b ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Different revisions of the Marvell 88q2xxx phy needs different init
sequences.

Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.
Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a broadcast AppleTalk packet is received, prefer queuing it on the
socket whose address matches the address of the interface that received
the packet (and is listening on the correct port). Userspace
applications that handle such packets will usually send a response on
the same socket that received the packet; this fix allows the response
to be sent on the correct interface.

If a socket matching the interface's address is not found, an arbitrary
socket listening on the correct port will be used, if any. This matches
the implementation's previous behavior.

Fixes atalkd's responses to network information requests when multiple
network interfaces are configured to use AppleTalk.

Link: https://lore.kernel.org/netdev/20200722113752.1218-2-vincent.ldev@duvert.net/
Link: https://gist.github.com/VinDuv/4db433b6dce39d51a5b7847ee749b2a4Signed-off-by: Vincent Duvert <vincent.ldev@duvert.net>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The change from skb_copy to pskb_copy unfortunately changed the data
copying to omit the ethernet header, since it was pulled before reaching
this point. Fix this by calling __skb_push/pull around pskb_copy.

Fixes: 59c878cb ("net: bridge: fix multicast-to-unicast with fraglist GSO")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tmigr_setup_groups() fails the level 0 group allocation, then the
cleanup derefences index -1 of the local stack array.

Prevent this by checking the loop condition first.

Fixes: 7ee98877 ("timers: Implement the hierarchical pull model")
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/20240506041059.86877-1-ppbuk5246@gmail.com