When processing counter updates, if any action set using the newly
 incremented counter includes an encap action, prod the corresponding
 neighbouring entry to indicate to the neighbour cache that the entry
 is still in use and passing traffic.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230621121504.17004-1-edward.cree@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The QCA8K switch supports additional modes that can be handled in
hardware for the LED netdev trigger.

Add these additional modes to further support the Switch LEDs and
offload more blink modes.

Add additional modes:
- link_10
- link_100
- link_1000
- half_duplex
- full_duplex
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230621095409.25859-1-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Document newly introduced modes and entry for the LED netdev trigger.

Add documentation for new modes:
- link_10
- link_100
- link_1000
- half_duplex
- full_duplex

Add documentation for new entry:
- hw_control

Also add additional info for the interval entry and the tx/rx modes with
the special case of hw_control ON.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230621092653.23172-1-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In a setup where a Thunderbolt hub connects to Ethernet and a display
through USB Type-C, users may experience a hung task timeout when they
remove the cable between the PC and the Thunderbolt hub.
This is because the igb_down function is called multiple times when
the Thunderbolt hub is unplugged. For example, the igb_io_error_detected
triggers the first call, and the igb_remove triggers the second call.
The second call to igb_down will block at napi_synchronize.
Here's the call trace:
    __schedule+0x3b0/0xddb
    ? __mod_timer+0x164/0x5d3
    schedule+0x44/0xa8
    schedule_timeout+0xb2/0x2a4
    ? run_local_timers+0x4e/0x4e
    msleep+0x31/0x38
    igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4]
    __igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4]
    igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4]
    __dev_close_many+0x95/0xec
    dev_close_many+0x6e/0x103
    unregister_netdevice_many+0x105/0x5b1
    unregister_netdevice_queue+0xc2/0x10d
    unregister_netdev+0x1c/0x23
    igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4]
    pci_device_remove+0x3f/0x9c
    device_release_driver_internal+0xfe/0x1b4
    pci_stop_bus_device+0x5b/0x7f
    pci_stop_bus_device+0x30/0x7f
    pci_stop_bus_device+0x30/0x7f
    pci_stop_and_remove_bus_device+0x12/0x19
    pciehp_unconfigure_device+0x76/0xe9
    pciehp_disable_slot+0x6e/0x131
    pciehp_handle_presence_or_link_change+0x7a/0x3f7
    pciehp_ist+0xbe/0x194
    irq_thread_fn+0x22/0x4d
    ? irq_thread+0x1fd/0x1fd
    irq_thread+0x17b/0x1fd
    ? irq_forced_thread_fn+0x5f/0x5f
    kthread+0x142/0x153
    ? __irq_get_irqchip_state+0x46/0x46
    ? kthread_associate_blkcg+0x71/0x71
    ret_from_fork+0x1f/0x30

In this case, igb_io_error_detected detaches the network interface
and requests a PCIE slot reset, however, the PCIE reset callback is
not being invoked and thus the Ethernet connection breaks down.
As the PCIE error in this case is a non-fatal one, requesting a
slot reset can be avoided.
This patch fixes the task hung issue and preserves Ethernet
connection by ignoring non-fatal PCIE errors.
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620174732.4145155-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rasmus Villemoes says:

====================
net: dsa: microchip: fix writes to phy registers >= 0x10

Patch 1 is just a simplification, technically unrelated to the other
two patches. But it would be a bit inconsistent to have the new
ksz_prmw32() introduced in patch 2 use ksz_rmw32() while leaving
ksz_prmw8() as-is.

The actual fix is of course patch 3. I can definitely see some weird
behaviour on our ksz9567 when writing to phy registers 0x1e and 0x1f
(with phytool from userspace), though it does not seem that the effect
is always to write zeroes to the buddy register as the errata sheet
says would be the case. In our case, the switch is connected via i2c;
I hope somebody with other switches and/or the SPI variants can test
this.
====================

Link: https://lore.kernel.org/r/20230620113855.733526-1-linux@rasmusvillemoes.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

According to the errata sheets for ksz9477 and ksz9567, writes to the
PHY registers 0x10-0x1f (i.e. those located at addresses 0xN120 to
0xN13f) must be done as a 32 bit write to the 4-byte aligned address
containing the register, hence requires a RMW in order not to change
the adjacent PHY register.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230620113855.733526-4-linux@rasmusvillemoes.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This will be used in a subsequent patch fixing an errata for writes to
certain PHY registers.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20230620113855.733526-3-linux@rasmusvillemoes.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Implement ksz_prmw8() in terms of ksz_rmw8(), just as all the other
ksz_pX are implemented in terms of ksz_X. No functional change.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20230620113855.733526-2-linux@rasmusvillemoes.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Przemek suggests that I shouldn't accuse GCC of witchcraft,
there is a simpler explanation for why we need manual define.

scripts/headers_install.sh modifies the guard, removing _UAPI.
That's why including a kernel header from the tree and from
/usr leads to duplicate definitions.

This also solves the mystery of why I needed to include
the header conditionally. I had the wrong guards for most
cases but ethtool.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20230621231719.2728928-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Half a year passed since commit 049fe536 ("net: txgbe: Add operations
to interact with firmware") was submitted, the buffer in
txgbe_calc_eeprom_checksum was not used. So remove it and the related
branch codes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306200242.FXsHokaJ-lkp@intel.com/Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620062519.1575298-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
Add and use helper for PCS negotiation modes

Earlier this month, I proposed a helper for deciding whether a PCS
should use inband negotiation modes or not. There was some discussion
around this topic, and I believe there was no disagreement about
providing the helper.

The initial discussion can be found at:

https://lore.kernel.org/r/ZGIkGmyL8yL1q1zp@shell.armlinux.org.uk

Subsequently, I posted a RFC series back in May:

https://lore.kernel.org/r/ZGzhvePzPjJ0v2En@shell.armlinux.org.uk

that added a helper, phylink_pcs_neg_mode() which PCS drivers could use
to parse the state, and updated a bunch of drivers to use it. I got
a couple of bits of feedback to it, including some ACKs.

However, I've decided to take this slightly further and change the
"mode" parameter to both the pcs_config() and pcs_link_up() methods
when a PCS driver opts in to this (by setting "neg_mode" in the
phylink_pcs structure.) If this is not set, we default to the old
behaviour. That said, this series converts all the PCS implementations
I can find currently in net-next.

Doing this has the added benefit that the negotiation mode parameter
is also available to the pcs_link_up() function, which can now know
whether inband negotiation was in fact enabled or not at pcs_config()
time.

It has been posted as RFC at:

https://lore.kernel.org/r/ZIh/CLQ3z89g0Ua0@shell.armlinux.org.uk

and received one reply, thanks Elad, which is a similar amount of
interest to previous postings. Let's post it as non-RFC and see
whether we get more reaction.
====================

Link: https://lore.kernel.org/r/ZIxQIBfO9dH5xFlg@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update macb's embedded PCS drivers to use neg_mode, even though it
makes no use of it or the "mode" argument. This makes the driver
consistent with converted drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Eo-00EaGX-KJ@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update mt7530's embedded PCS driver to use neg_mode, even though it
makes no use of it or the "mode" argument. This makes the driver
consistent with converted drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Ej-00EaGR-Fk@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update B53's embedded PCS driver to use neg_mode, even though it makes
no use of it or the "mode" argument. This makes the driver consistent
with converted drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1qA8Ee-00EaGL-Az@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update Sparx5's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EZ-00EaGF-6F@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update qca8k's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EU-00EaG9-1l@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update prestera's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Acked-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EO-00EaG3-TR@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update mvpp2's embedded PCS drivers to use neg_mode rather than the
mode argument, remembering to update the ACPI path as well. As there
are no pcs_link_up() methods, this only affects the two pcs_config()
methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EJ-00EaFx-P6@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update mvneta's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EE-00EaFr-Kx@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update lan966x's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8E9-00EaFl-GN@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update the Lynx PCS driver to use neg_mode rather than the mode
argument. This ensures that the link_up() method will always program
the speed and duplex when negotiation is disabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8E4-00EaFf-Bf@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update the Lynxi PCS driver to use neg_mode rather than the mode
argument. This ensures that the link_up() method will always program
the speed and duplex when negotiation is disabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Dz-00EaFY-5A@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update xpcs to use neg_mode to configure whether inband negotiation
should be used. We need to update sja1105 as well as that directly
calls into the XPCS driver's config function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Dt-00EaFS-W9@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert fman_dtsec, xilinx_axienet and pcs-lynx to pass the neg_mode
into phylink_mii_c22_pcs_config(). Where appropriate, drivers are
updated to have neg_mode passed into their pcs_config() and
pcs_link_up() functions. For other drivers, we just hoist the call
to phylink_pcs_neg_mode() to their pcs_config() method out of
phylink_mii_c22_pcs_config().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Do-00EaFM-Ra@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use phylink_pcs_neg_mode() for phylink_mii_c22_pcs_config(). This
results in no functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Dj-00EaFG-Mt@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

PCS have to work out whether they should enable PCS negotiation by
looking at the "mode" and "interface" arguments, and the Autoneg bit
in the advertising mask.

This leads to some complex logic, so lets pull that out into phylink
and instead pass a "neg_mode" argument to the PCS configuration and
link up methods, instead of the "mode" argument.

In order to transition drivers, add a "neg_mode" flag to the phylink
PCS structure to PCS can indicate whether they want to be passed the
neg_mode or the old mode argument.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8De-00EaFA-Ht@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Yueh-Shun Li says:

====================
Fix comment typos about "transmit"

Fix typos about "transmit" missing the first "s"
found by searching with keyword "tram" in the first 7
patches.
====================

Link: https://lore.kernel.org/r/20230622012627.15050-1-shamrocklee@posteo.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Spell "retransmit" properly.

Found by searching for keyword "tranm".
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Link: https://lore.kernel.org/r/20230622012627.15050-7-shamrocklee@posteo.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Spell "transmissions" properly.

Found by searching for keyword "tranm".
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Link: https://lore.kernel.org/r/20230622012627.15050-6-shamrocklee@posteo.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Spell "transmission" properly.

Found by searching for keyword "tranm".
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Link: https://lore.kernel.org/r/20230622012627.15050-3-shamrocklee@posteo.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

tools/testing/selftests/net/fcnal-test.sh
  d7a2fc14 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
  dd017c72 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/
https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/

No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from ipsec, bpf, mptcp and netfilter.

  Current release - regressions:

   - netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain

   - eth: mlx5e:
      - fix scheduling of IPsec ASO query while in atomic
      - free IRQ rmap and notifier on kernel shutdown

  Current release - new code bugs:

   - phy: manual remove LEDs to ensure correct ordering

  Previous releases - regressions:

   - mptcp: fix possible divide by zero in recvmsg()

   - dsa: revert "net: phy: dp83867: perform soft reset and retain
     established link"

  Previous releases - always broken:

   - sched: netem: acquire qdisc lock in netem_change()

   - bpf:
      - fix verifier id tracking of scalars on spill
      - fix NULL dereference on exceptions
      - accept function names that contain dots

   - netfilter: disallow element updates of bound anonymous sets

   - mptcp: ensure listener is unhashed before updating the sk status

   - xfrm:
      - add missed call to delete offloaded policies
      - fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets

   - selftests: fixes for FIPS mode

   - dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling

   - eth: sfc: use budget for TX completions

  Misc:

   - wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"

* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
  revert "net: align SO_RCVMARK required privileges with SO_MARK"
  net: wwan: iosm: Convert single instance struct member to flexible array
  sch_netem: acquire qdisc lock in netem_change()
  selftests: forwarding: Fix race condition in mirror installation
  wifi: mac80211: report all unusable beacon frames
  mptcp: ensure listener is unhashed before updating the sk status
  mptcp: drop legacy code around RX EOF
  mptcp: consolidate fallback and non fallback state machine
  mptcp: fix possible list corruption on passive MPJ
  mptcp: fix possible divide by zero in recvmsg()
  mptcp: handle correctly disconnect() failures
  bpf: Force kprobe multi expected_attach_type for kprobe_multi link
  bpf/btf: Accept function names that contain dots
  Revert "net: phy: dp83867: perform soft reset and retain established link"
  net: mdio: fix the wrong parameters
  netfilter: nf_tables: Fix for deleting base chains with payload
  netfilter: nfnetlink_osf: fix module autoload
  netfilter: nf_tables: drop module reference after updating chain
  netfilter: nf_tables: disallow timeout for anonymous sets
  netfilter: nf_tables: disallow updates of anonymous sets
  ...

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Correctly save/restore PMUSERNR_EL0 when host userspace is using
     PMU counters directly

   - Fix GICv2 emulation on GICv3 after the locking rework

   - Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
     document why

  Generic:

   - Avoid setting page table entries pointing to a deleted memslot if a
     host page table entry is changed concurrently with the deletion"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Avoid illegal stage2 mapping on invalid memory slot
  KVM: arm64: Use raw_smp_processor_id() in kvm_pmu_probe_armpmu()
  KVM: arm64: Restore GICv2-on-GICv3 functionality
  KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded
  KVM: arm64: PMU: Restore the host's PMUSERENR_EL0

Pull powerpc fix from Michael Ellerman:

 - Disable IRQs when switching mm in exit_lazy_flush_tlb() called from
   exit_mmap()

Thanks to Nicholas Piggin and Sachin Sant.

* tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled

Pull pci fix from Bjorn Helgaas:

 - Transfer Intel LGM GW PCIe maintenance from Rahul Tanwar to Chuanhua
   Lei (Zhu YiXin)

* tag 'pci-v6.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Chuanhua Lei as Intel LGM GW PCIe maintainer

Pull MMC fixes from Ulf Hansson:

 - Fix support for deferred probing for several host drivers

 - litex_mmc: Use async probe as it's common for all mmc hosts

 - meson-gx: Fix bug when scheduling while atomic

 - mmci_stm32: Fix max busy timeout calculation

 - sdhci-msm: Disable broken 64-bit DMA on MSM8916

* tag 'mmc-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: usdhi60rol0: fix deferred probing
  mmc: sunxi: fix deferred probing
  mmc: sh_mmcif: fix deferred probing
  mmc: sdhci-spear: fix deferred probing
  mmc: sdhci-acpi: fix deferred probing
  mmc: owl: fix deferred probing
  mmc: omap_hsmmc: fix deferred probing
  mmc: omap: fix deferred probing
  mmc: mvsdio: fix deferred probing
  mmc: mtk-sd: fix deferred probing
  mmc: meson-gx: fix deferred probing
  mmc: bcm2835: fix deferred probing
  mmc: litex_mmc: set PROBE_PREFER_ASYNCHRONOUS
  mmc: meson-gx: remove redundant mmc_request_done() call from irq context
  mmc: mmci: stm32: fix max busy timeout calculation
  mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916

Merge tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:
 "One small fix for an AMD PMF driver issue which is causing issues for
  users of just released AMD laptop models"

* tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmf: Register notify handler only if SPS is enabled

Pull io_uring fixes from Jens Axboe:
 "A fix for a race condition with poll removal and linked timeouts, and
  then a few followup fixes/tweaks for the msg_control patch from last
  week.

  Not super important, particularly the sparse fixup, as it was broken
  before that recent commit. But let's get it sorted for real for this
  release, rather than just have it broken a bit differently"

* tag 'io_uring-6.4-2023-06-21' of git://git.kernel.dk/linux:
  io_uring/net: use the correct msghdr union member in io_sendmsg_copy_hdr
  io_uring/net: disable partial retries for recvmsg with cmsg
  io_uring/net: clear msg_controllen on partial sendmsg retry
  io_uring/poll: serialize poll linked timer start with poll removal

Pull cgroup fixes from Tejun Heo:
 "It's late but here are two bug fixes. Both fix problems which can be
  severe but are very confined in scope. The risk to most use cases
  should be minimal.

   - Fix for an old bug which triggers if a cgroup subsystem is
     remounted to a different hierarchy while someone is reading its
     cgroup.procs/tasks file. The risk is pretty low given how seldom
     cgroup subsystems are moved across hierarchies.

   - We moved cpus_read_lock() outside of cgroup internal locks a while
     ago but forgot to update the legacy_freezer leading to lockdep
     triggers. Fixed"

* tag 'cgroup-for-6.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Do not corrupt task iteration when rebinding subsystem
  cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex in freezer_css_{online,offline}()

Merge tag 'kvmarm-fixes-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.4, take #4

- Correctly save/restore PMUSERNR_EL0 when host userspace is using
  PMU counters directly

- Fix GICv2 emulation on GICv3 after the locking rework

- Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
  document why...