- 07 Dec, 2023 28 commits
-
-
Krzysztof Kozlowski authored
Linux handles both versions, but bindings expect GPIO properties to have 'gpios' suffix instead of 'gpio': sc8180x-primus.dtb: pci@1c10000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected) Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231111164229.63803-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Krzysztof Kozlowski authored
Linux handles both versions, but bindings expect GPIO properties to have 'gpios' suffix instead of 'gpio': sc8180x-lenovo-flex-5g.dtb: pci@1c08000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
Soundwire Devicetree bindings expect the Soundwire controller device node to be named just "soundwire": sdm845-db845c.dtb: swm@c85: $nodename:0: 'swm@c85' does not match '^soundwire(@.*)?$' Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20231111095617.16496-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
There is no "panic-indicator" default trigger but a property with that name: sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected) Fixes: 3f72e2d3 ("arm64: dts: qcom: Add Dragonboard 845c") Signed-off-by: -
Krzysztof Kozlowski authored
There is no "panic-indicator" default trigger but a property with that name: qrb5165-rb5.dtb: leds: led-user4: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected) Fixes: b5cbd84e ("arm64: dts: qcom: qrb5165-rb5: Add onboard LED support") Signed-off-by:Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
-
Bryan O'Donoghue authored
To test out a different GDSC change I wanted to have a USB keypress resume a system in suspend. Adding wakeup-source to usb_1 and usb_2 "just works" for me on rb5. Consistent with qcm2290 and sa8775p add wakeup-source to the dtsi for the SoC. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
-
Steev Klimaszewski authored
The keyboard and touchpad can be used to wake the machine up from sleep, so mark them as such in the dts file. Signed-off-by:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
-
Shazad Hussain authored
The volume down key is controlled by PMIC via the PON hardware on sa8775p platform, so enable the same for sa8775p-ride. Signed-off-by:
Shazad Hussain <quic_shazhuss@quicinc.com> Link: https://lore.kernel.org/r/20231107120503.28917-1-quic_shazhuss@quicinc.comSigned-off-by:
-
Krzysztof Kozlowski authored
The Qualcomm MDSS bindings expect that DPU opp-table is defined within DPU node: sm8350-hdk.dtb: display-subsystem@ae00000: Unevaluated properties are not allowed ('opp-table' was unexpected) Signed-off-by:Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231107103540.27353-3-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Qualcomm MDSS Embedded DisplayPort bindings do not allow sound-dai-cells: sc8280xp-lenovo-thinkpad-x13s.dtb: displayport-controller@aea0000: #sound-dai-cells: False schema does not allow [[0] Signed-off-by:
-
Krzysztof Kozlowski authored
Qualcomm MDSS Embedded DisplayPort bindings do not allow sound-dai-cells: sc8180x-primus.dtb: displayport-controller@ae9a000: #sound-dai-cells: False schema does not allow [[0]] Signed-off-by:
-
Krzysztof Kozlowski authored
Soundwire Devicetree bindings expect the Soundwire controller device node to be named just "soundwire": sm8250-xiaomi-elish-boe.dtb: soundwire-controller@3250000: $nodename:0: 'soundwire-controller@3250000' does not match '^soundwire(@.*)?$' Reported-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Soundwire Devicetree bindings expect the Soundwire controller device node to be named just "soundwire": sc8280xp-lenovo-thinkpad-x13s.dtb: soundwire-controller@3210000: $nodename:0: 'soundwire-controller@3210000' does not match '^soundwire(@.*)?$' Reported-by:
-
Krzysztof Kozlowski authored
There is no "multi-ch-bit-off" property in LLCC, according to bindings and Linux driver: qdu1000-idp.dtb: system-cache-controller@19200000: 'multi-ch-bit-off' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Mukesh Ojha <quic_mojha@quicinc.com> Link: https://lore.kernel.org/r/20231107080417.16700-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
According to bindings and Linux driver there is no "multi_channel_register" address space for LLCC. The first "reg" entry is supposed to be llcc0_base since commit 43aa006e ("dt-bindings: arm: msm: Fix register regions used for LLCC banks"): qdu1000-idp.dtb: system-cache-controller@19200000: reg: [[0, 421527552, 0, 14155776], [0, 438304768, 0, 524288], [0, 572293416, 0, 4]] is too long qdu1000-idp.dtb: system-cache-controller@19200000: reg-names:0: 'llcc0_base' was expected qdu1000-idp.dtb: system-cache-controller@19200000: reg-names: ['llcc_base', 'llcc_broadcast_base', 'multi_channel_register'] is too long Signed-off-by:
-
Neil Armstrong authored
Fix the following dt bindings check: arch/arm64/boot/dts/qcom/sm8450-hdk.dtb: soundwire-controller@31f0000: $nodename:0: 'soundwire-controller@31f0000' does not match '^soundwire(@.*)?$' from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#Signed-off-by: -
Neil Armstrong authored
Fix the following dt bindings check: arch/arm64/boot/dts/qcom/sm8550-mtp.dtb: soundwire-controller@6ab0000: $nodename:0: 'soundwire-controller@6ab0000' does not match '^soundwire(@.*)?$' from schema $id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#Signed-off-by:
-
Bryan O'Donoghue authored
Add in CAMCC for sc8280xp. The sc8280xp Camera Clock Controller looks similar to most of the sdmX, smX and now scX controllers. Signed-off-by:
-
Bjorn Andersson authored
Merge the SC8280XP Camera Clock Controller binding updates from the topic branch, to gain access to clock defines to be used in DeviceTree source.
-
Bryan O'Donoghue authored
Add device tree bindings for the camera clock controller on Qualcomm SC8280XP platform. Signed-off-by:
-
Bryan O'Donoghue authored
Various of the camcc bindings are repeated serially. We can use qcom,gcc.yaml to encapsulate the generic repeated patterns. Signed-off-by:
-
Mukesh Ojha authored
Enable download mode setting for sm8550 which can help collect ramdump for this SoC. Signed-off-by:
-
Mukesh Ojha authored
Enable download mode for sm8350 which can help collect ramdump for this SoC. Signed-off-by:
-
Mukesh Ojha authored
Enable download mode for sm8250 which can help collect ramdump for this SoC. Signed-off-by:
-
Kathiravan Thirumoorthy authored
Like all other IPQ SoCs, bootloader will collect the system RAM contents upon crash for the post morterm analysis. If we don't reserve the memory region used by bootloader, obviously linux will consume it and upon next boot on crash, bootloader will be loaded in the same region, which will lead to loose some of the data, sometimes we may miss out critical information. So lets reserve the region used by the bootloader. Similarly SBL copies some data into the reserved region and it will be used in the crash scenario. So reserve 1MB for SBL as well. While at it, enable the SMEM support along with TCSR mutex. Signed-off-by:
Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by:
-
Kathiravan Thirumoorthy authored
Add the color and function property to the GPIO LED node, which are missed out in the initial submission. Signed-off-by:
-
Kathiravan Thirumoorthy authored
Add support for wlan-2g LED on GPIO64. Signed-off-by:
-
Caleb Connolly authored
The default for the QCM2290 platform that this board is based on is OTG mode, however the role detection logic is not hooked up for this board and the dwc3 driver is configured to not allow role switching from userspace. Force this board to host mode as this is the preferred usecase until we get role switching hooked up. Fixes: e1877196 ("arm64: dts: qcom: Add initial QTI RB1 device tree") Signed-off-by:
Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by:
-
- 03 Dec, 2023 12 commits
-
-
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Make the change. Fixes: 5f82b9cd ("arm64: dts: qcom: Add SM6350 device tree") Reviewed-by:Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20231106144335.v2.8.Ic1d4402e99c70354d501ccd98105e908a902f671@changeidSigned-off-by:
-
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Make the change. Fixes: 152d1faf ("arm64: dts: qcom: add SC8280XP platform") Reviewed-by: -
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Make the change. Fixes: 09b701b8 ("arm64: dts: qcom: sa8775p: add the watchdog node") Reviewed-by:Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20231106144335.v2.6.I909b7c4453d7b7fb0db4b6e49aa21666279d827d@changeidSigned-off-by:
-
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Make the change. Fixes: 46a4359f ("arm64: dts: qcom: sm8250: Add watchdog bark interrupt") Reviewed-by: -
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Make the change. Fixes: b094c8f8 ("arm64: dts: qcom: sm8150: Add watchdog bark interrupt") Reviewed-by: -
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Make the change. Fixes: 36c436b0 ("arm64: dts: qcom: sdm845: Add watchdog bark interrupt") Reviewed-by: -
Douglas Anderson authored
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog bark interrupt edge triggered"), the Qualcomm watchdog timer's bark interrupt should be configured as edge triggered. Make the change. Fixes: 0e51f883 ("arm64: dts: qcom: sc7280: Add APSS watchdog node") Reviewed-by: -
Douglas Anderson authored
On sc7180 when the watchdog timer fires your logs get filled with: watchdog0: pretimeout event watchdog0: pretimeout event watchdog0: pretimeout event ... watchdog0: pretimeout event If you're using console-ramoops to debug crashes the above gets quite annoying since it blows away any other log messages that might have been there. The issue is that the "bark" interrupt (AKA the "pretimeout" interrupt) remains high until the watchdog is pet. Since we've got things configured as "level" triggered we'll keep getting interrupted over and over. Let's switch to edge triggered. Now we'll get one interrupt when the "bark" interrupt goes off and won't get another one until the "bark" interrupt is cleared and asserts again. This matches how many older Qualcomm SoCs have things configured. Fixes: 28cc13e4 ("arm64: dts: qcom: sc7180: Add watchdog bark interrupt") Reviewed-by:
-
Krzysztof Kozlowski authored
The IOMMUs for PCI controller on SC8180x are defined in iommu-map, so drop duplicared iommus: sc8180x-lenovo-flex-5g.dtb: pci@1c08000: Unevaluated properties are not allowed ('iommus' was unexpected) Signed-off-by: -
Luca Weiss authored
Document the compatible for the MSM8926-based HTC One Mini 2 smartphone. Acked-by:
Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20231125-htc-memul-v3-2-e8f4c5839e23@z3ntu.xyzSigned-off-by:
-
Luca Weiss authored
Add the vendor prefix for HTC (https://www.htc.com/). Acked-by:
-
Krzysztof Kozlowski authored
The TX Soundwire controller should take clock from TX macro codec, not VA macro codec clock, otherwise the clock stays disabled. This looks like a copy-paste issue, because the SC8280xp code uses here correctly clock from TX macro. The VA macro clock is already consumed by TX macro codec, thus it won't be disabled by this change. Fixes: 61b00638 ("arm64: dts: qcom: sm8550: add Soundwire controllers") Reported-by:
-
