While HDAudio controller supports buffer packets up to 128 bytes low,
audio format shall be taken into consideration when calculating buffer
and period sizes to avoid undesired xruns.

As *_size in ALSA terms means frames (channels times bit-depth-bytes),
hw_rules can calculate minimal buffer and period sizes solely from
sample rate and the number of milliseconds commonly used on the
AudioDSP firmware side.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-14-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order to make sure that IPC interface is stable use assert_static to
check union and struct sizes that describe communication interface.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-13-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When bringing up setups it's vital to have access to debug functionality
even if firmware boot fails. As order of probe()ing operations is
changed, update remove() procedure accordingly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-12-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is recommended to keep the DSP domain in full-power when starting DMA
engines.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-11-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The result of list_next_entry()/list_last_entry() is never null.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-10-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

While PROBE_MOD_UUID is always part of the base AudioDSP firmware
manifest, from maintenance point of view it is better to check the
result.

Fixes: dab8d000 ("ASoC: Intel: avs: Add data probing requests")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-9-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

While stream_tag for CLDMA on SKL-based platforms is always 1, function
hda_cldma_setup() uses AZX_SD_CTL_STRM() macro which does:
	stream_tag << 20

what combined with stream_tag type of 'unsigned int' generates a
potential overflow issue. Update the field type to fix that.

Fixes: 45864e49 ("ASoC: Intel: avs: Implement CLDMA transfer")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-8-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

strscpy() and snprintf() are the recommended equivalents of their
riskier friends.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-7-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The ASRC module configuration consists of several reserved fields. Zero
them out when initializing the module to avoid sending invalid data.

Fixes: 274d79e5 ("ASoC: Intel: avs: Configure modules according to their type")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Copier's config_length shall always be at least one even if there is no
configuration payload to carry. While the firmware treats
config_length=0 or 1 in the same manner, the driver shall initialize the
module properly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-5-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Commit df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") enforced
strict flex array declarations. This generates false-positive in form of:
"memcpy: detected field-spanning write". Avoid it by utilizing the
DECLARE_FLEX_ARRAY() macro.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-4-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

For resources with ID other than 0 the current calculus is incorrect.

Fixes: 275b583d ("ASoC: Intel: avs: ICL-based platforms support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-3-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Revert changes from commit b87b8f43 ("ASoC: Intel: avs: Drop
superfluous stream decoupling") to restore working streaming during S3.

Fixes: b87b8f43 ("ASoC: Intel: avs: Drop superfluous stream decoupling")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Deduplicate Kconfig entries for CONFIG_CXL_PMU

 - Fix unselectable choice entry in MIPS Kconfig, and forbid this
   structure

 - Remove unused include/asm-generic/export.h

 - Fix a NULL pointer dereference bug in modpost

 - Enable -Woverride-init warning consistently with W=1

 - Drop KCSAN flags from *.mod.c files

* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: Fix typo HEIGTH to HEIGHT
  Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
  kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
  kbuild: make -Woverride-init warnings more consistent
  modpost: do not make find_tosym() return NULL
  export.h: remove include/asm-generic/export.h
  kconfig: do not reparent the menu inside a choice block
  MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
  cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig

Pull EDAC fixes from Borislav Petkov:

 - Fix more issues in the AMD FMPM driver

* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  RAS: Avoid build errors when CONFIG_DEBUG_FS=n
  RAS/AMD/FMPM: Safely handle saved records of various sizes
  RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()

Pull irq fixes from Borislav Petkov:

 - Fix an unused function warning on irqchip/irq-armada-370-xp

 - Fix the IRQ sharing with pinctrl-amd and ACPI OSL

* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/armada-370-xp: Suppress unused-function warning
  genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd

Pull x86 perf fixes from Borislav Petkov:

 - Define the correct set of default hw events on AMD Zen4

 - Use the correct stalled cycles PMCs on AMD Zen2 and newer

 - Fix detection of the LBR freeze feature on AMD

* tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later
  perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later
  perf/x86/amd/lbr: Use freeze based on availability
  x86/cpufeatures: Add new word for scattered features

Pull timers update from Borislav Petkov:

 - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that
   tglx can relax more :-P

* tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add co-maintainers for time[rs]

Pull objtool fix from Borislav Petkov:

 - Fix a format specifier build error in objtool during an x32 build

* tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix compile failure when using the x32 compiler

Pull x86 fixes from Borislav Petkov:

 - Make sure single object builds in arch/x86/virt/ ala
      make ... arch/x86/virt/vmx/tdx/seamcall.o
   work again

 - Do not do ROM range scans and memory validation when the kernel is
   running as a SEV-SNP guest as those can get problematic and, before
   that, are not really needed in such a guest

 - Exclude the build-time generated vdso-image-x32.o object from objtool
   validation and in particular the return sites in there due to a
   warning which fires when an unpatched return thunk is being used

 - Improve the NMI CPUs stall message to show additional information
   about the state of each CPU wrt the NMI handler

 - Enable gcc named address spaces support only on !KCSAN configs due to
   compiler options incompatibility

 - Revert a change which was trying to use GB pages for mapping regions
   only when the regions would be large enough but that change lead to
   kexec failing

 - A documentation fixlet

* tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use obj-y to descend into arch/x86/virt/
  x86/sev: Skip ROM range scans and validation for SEV-SNP guests
  x86/vdso: Fix rethunk patching for vdso-image-x32.o too
  x86/nmi: Upgrade NMI backtrace stall checks & messages
  x86/percpu: Disable named address spaces for KCSAN
  Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped."
  Documentation/x86: Fix title underline length

Fixed a typo in some variables where height was misspelled as heigth.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

As of the first s390 pull request during the 6.9 merge window,
commit 691632f0 ("Merge tag 's390-6.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be
built with LLVM=1 when using LLVM 18.1.0, which is the first version
that has SystemZ support implemented in ld.lld and llvm-objcopy.

Update the supported architectures table in the Kbuild LLVM
documentation to note this explicitly to make it more discoverable by
users and other developers. Additionally, this brings s390 in line with
the rest of the architectures in the table, which all support LLVM=1.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When KCSAN and CONSTRUCTORS are enabled, one can trigger the

  "Unpatched return thunk in use. This should not happen!"

catch-all warning.

Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.

KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:

  -------------------
  Disassembly of section .text.startup:

  ...

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:

  -------------------
  Disassembly of section .text.startup:

  0000000000000010 <_sub_I_00099_0>:
    10:   f3 0f 1e fa             endbr64
    14:   e8 00 00 00 00          call   19 <_sub_I_00099_0+0x9>
                          15: R_X86_64_PLT32      __tsan_init-0x4
    19:   e9 00 00 00 00          jmp    1e <_sub_I_00099_0+0xe>
                          1a: R_X86_64_PLT32      __x86_return_thunk-0x4

  ...

  0000000000000030 <_sub_I_00099_0>:
    30:   f3 0f 1e fa             endbr64
    34:   e8 00 00 00 00          call   39 <_sub_I_00099_0+0x9>
                          35: R_X86_64_PLT32      __tsan_init-0x4
    39:   e9 00 00 00 00          jmp    3e <__ksymtab_cryptd_alloc_ahash+0x2>
                          3a: R_X86_64_PLT32      __x86_return_thunk-0x4
  -------------------

in the .ko file.

Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.

Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.

Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.deSigned-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.

Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.

There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.

Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.

Fixes: 2cd3271b ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.

	In file included from check.c:16:
	check.c: In function ‘add_dead_ends’:
	/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
	   46 |                 "%s: warning: objtool: " format "\n",   \
	      |                 ^~~~~~~~~~~~~~~~~~~~~~~~
	check.c:613:33: note: in expansion of macro ‘WARN’
	  613 |                                 WARN("can't find unreachable insn at %s+0x%" PRIx64,
	      |                                 ^~~~
	...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org

Pull xfs fixes from Chandan Babu:

 - Allow stripe unit/width value passed via mount option to be written
   over existing values in the super block

 - Do not set current->journal_info to avoid its value from being miused
   by another filesystem context

* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't use current->journal_info
  xfs: allow sunit mount option to repair bad primary sb stripe values

Pull SCSI fixes and updates from James Bottomley:
 "Fully half this pull is updates to lpfc and qla2xxx which got
  committed just as the merge window opened. A sizeable fraction of the
  driver updates are simple bug fixes (and lock reworks for bug fixes in
  the case of lpfc), so rather than splitting the few actual
  enhancements out, we're just adding the drivers to the -rc1 pull.

  The enhancements for lpfc are log message removals, copyright updates
  and three patches redefining types. For qla2xxx it's just removing a
  debug message on module removal and the manufacturer detail update.

  The two major fixes are the sg teardown race and a core error leg
  problem with the procfs directory not being removed if we destroy a
  created host that never got to the running state. The rest are minor
  fixes and constifications"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
  scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
  scsi: core: Fix unremoved procfs host directory regression
  scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
  scsi: sd: Fix TCG OPAL unlock on system resume
  scsi: sg: Avoid sg device teardown race
  scsi: lpfc: Copyright updates for 14.4.0.1 patches
  scsi: lpfc: Update lpfc version to 14.4.0.1
  scsi: lpfc: Define types in a union for generic void *context3 ptr
  scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
  scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
  scsi: lpfc: Use a dedicated lock for ras_fwlog state
  scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
  scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
  scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
  scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
  scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
  scsi: lpfc: Remove unnecessary log message in queuecommand path
  scsi: qla2xxx: Update version to 10.02.09.200-k
  scsi: qla2xxx: Delay I/O Abort on PCI error
  scsi: qla2xxx: Change debug message during driver unload
  ...

Pull i2c fix from Wolfram Sang:
 "A fix from Andi for I2C host drivers"

* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1

Pull USB fixes from Greg KH:
 "Here are a bunch of small USB fixes for reported problems and
  regressions for 6.9-rc2. Included in here are:

   - deadlock fixes for long-suffering issues

   - USB phy driver revert for reported problem

   - typec fixes for reported problems

   - duplicate id in dwc3 dropped

   - dwc2 driver fixes

   - udc driver warning fix

   - cdc-wdm race bugfix

   - other tiny USB bugfixes

  All of these have been in linux-next this past week with no reported
  issues"

* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: core: Fix deadlock in port "disable" sysfs attribute
  USB: core: Add hub_get() and hub_put() routines
  usb: typec: ucsi: Check capabilities before cable and identity discovery
  usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
  usb: typec: ucsi_acpi: Refactor and fix DELL quirk
  usb: typec: ucsi: Ack unsupported commands
  usb: typec: ucsi: Check for notifications after init
  usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
  usb: typec: Return size of buffer if pd_set operation succeeds
  usb: udc: remove warning when queue disabled ep
  usb: dwc3: pci: Drop duplicate ID
  usb: dwc3: Properly set system wakeup
  Revert "usb: phy: generic: Get the vbus supply"
  usb: cdc-wdm: close race between read and workqueue
  usb: dwc2: gadget: LPM flow fix
  usb: dwc2: gadget: Fix exiting from clock gating
  usb: dwc2: host: Fix ISOC flow in DDMA mode
  usb: dwc2: host: Fix remote wakeup from hibernation
  usb: dwc2: host: Fix hibernation flow
  USB: core: Fix deadlock in usb_deauthorize_interface()
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small staging driver fixes for the vc04_services driver
  that resolve reported problems:

   - strncpy fix for information leak

   - another information leak discovered by the previous strncpy fix

  Both of these have been in linux-next all this past week with no
  reported issues"

* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vc04_services: fix information leak in create_component()
  staging: vc04_services: changen strncpy() to strscpy_pad()

Merge tag 'i2c-host-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

One fix in the i801 driver where a bug caused touchpad
malfunctions on some Lenovo P1 models by incorrectly overwriting
a status variable during successful SMBUS transactions.

Commit c33621b4 ("x86/virt/tdx: Wire up basic SEAMCALL functions")
introduced a new instance of core-y instead of the standardized obj-y
syntax.

X86 Makefiles descend into subdirectories of arch/x86/virt inconsistently;
into arch/x86/virt/ via core-y defined in arch/x86/Makefile, but into
arch/x86/virt/svm/ via obj-y defined in arch/x86/Kbuild.

This is problematic when you build a single object in parallel because
multiple threads attempt to build the same file.

  $ make -j$(nproc) arch/x86/virt/vmx/tdx/seamcall.o
    [ snip ]
    AS      arch/x86/virt/vmx/tdx/seamcall.o
    AS      arch/x86/virt/vmx/tdx/seamcall.o
  fixdep: error opening file: arch/x86/virt/vmx/tdx/.seamcall.o.d: No such file or directory
  make[4]: *** [scripts/Makefile.build:362: arch/x86/virt/vmx/tdx/seamcall.o] Error 2

Use the obj-y syntax, as it works correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240330060554.18524-1-masahiroy@kernel.org

Pull drm fixes from Dave Airlie:
 "Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and
  then mostly scattered around. rc3 might be quieter with the holidays
  but we shall see.

  bridge:
   - select DRM_KMS_HELPER

  dma-buf:
   - fix NULL-pointer deref

  dp:
   - fix div-by-zero in DP MST unplug code

  fbdev:
   - select FB_IOMEM_FOPS for SBus

  sched:
   - fix NULL-pointer deref

  xe:
   - Fix build on mips
   - Fix wrong bound checks
   - Fix use of msec rather than jiffies
   - Remove dead code

  amdgpu:
   - SMU 14.0.1 updates
   - DCN 3.5.x updates
   - VPE fix
   - eDP panel flickering fix
   - Suspend fix
   - PSR fix
   - DCN 3.0+ fix
   - VCN 4.0.6 updates
   - debugfs fix

  amdkfd:
   - DMA-Buf fix
   - GFX 9.4.2 TLB flush fix
   - CP interrupt fix

  i915:
   - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c
   - Update a MTL workaround
   - Fix locking inversion in hwmon's sysfs
   - Remove a bogus error message around PXP
   - Fix UAF on VMA
   - Reset queue_priority_hint on parking
   - Display Fixes:
   - Remove duplicated audio enable/disable on SDVO and DP
   - Disable AuxCCS for Xe driver
   - Revert init order of MIPI DSI
   - DRRS debugfs fix with an extra refactor patch
   - VRR related fixes
   - Fix a JSL eDP corruption
   - Fix the cursor physical dma address
   - BIOS VBT related fix

  nouveau:
   - dmem: handle kcalloc() allocation failures

  qxl:
   - remove unused variables

  rockchip:
   - vop2: remove support for AR30 and AB30 formats

  vmwgfx:
   - debugfs: create ttm_resource_manager entry only if needed"

* tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits)
  drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode()
  drm/i915: Pre-populate the cursor physical dma address
  drm/i915/gt: Reset queue_priority_hint on parking
  drm/i915/vma: Fix UAF on destroy against retire race
  drm/i915: Do not print 'pxp init failed with 0' when it succeed
  drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()
  drm/i915/hwmon: Fix locking inversion in sysfs getter
  drm/i915/dsb: Fix DSB vblank waits when using VRR
  drm/i915/vrr: Generate VRR "safe window" for DSB
  drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status
  drm/i915/drrs: Refactor CPU transcoder DRRS check
  drm/i915/mtl: Update workaround 14018575942
  drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly
  drm/i915/display: Disable AuxCCS framebuffers if built for Xe
  drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP
  drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c
  drm/qxl: remove unused variable from `qxl_process_single_command()`
  drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()`
  drm/i915: add bug.h include to i915_memcpy.c
  drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
  ...

Merge tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fixes to seccomp and ftrace tests and a change to add config file for
  dmabuf-heap test to increase coverage"

* tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: dmabuf-heap: add config file for the test
  selftests/seccomp: Try to fit runtime of benchmark into timeout
  selftests/ftrace: Fix event filter target_func selection

Merge tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "One urgent fix for --alltests build failure related to renaming of
  CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED to the missing config
  option"

* tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: configs: Enable CONFIG_DAMON_DBGFS_DEPRECATED for --alltests

The config fragment enlists all the config options needed for the test.
This config is merged into the kernel's config on which this test is
run.

Fixed whitespace errors during commit:
Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The seccomp benchmark runs five scenarios, one calibration run with no
seccomp filters enabled then four further runs each adding a filter. The
calibration run times itself for 15s and then each additional run executes
for the same number of times.

Currently the seccomp tests, including the benchmark, run with an extended
120s timeout but this is not sufficient to robustly run the tests on a lot
of platforms. Sample timings from some recent runs:

   Platform          Run 1  Run 2  Run 3  Run 4
   ---------         -----  -----  -----  -----
   PowerEdge R200    16.6s  16.6s  31.6s  37.4s
   BBB (arm)         20.4s  20.4s  54.5s
   Synquacer (arm64) 20.7s  23.7s  40.3s

The x86 runs from the PowerEdge are quite marginal and routinely fail, for
the successful run reported here the timed portions of the run are at
117.2s leaving less than 3s of margin which is frequently breached. The
added overhead of adding filters on the other platforms is such that there
is no prospect of their runs fitting into the 120s timeout, especially
on 32 bit arm where there is no BPF JIT.

While we could lower the time we calibrate for I'm also already seeing the
currently completing runs reporting issues with the per filter overheads
not matching expectations:

Let's instead raise the timeout to 180s which is only a 50% increase on the
current timeout which is itself not *too* large given that there's only two
tests in this suite.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

The event filter function test has been failing in our internal test
farm:

| # not ok 33 event filter function - test event filtering on functions

Running the test in verbose mode indicates that this is because the test
erroneously determines that kmem_cache_free() is the most common caller
of kmem_cache_free():

  # # + cut -d: -f3 trace
  # # + sed s/call_site=([^+]*)+0x.*/1/
  # # + sort
  # # + uniq -c
  # # + sort
  # # + tail -n 1
  # # + sed s/^[ 0-9]*//
  # # + target_func=kmem_cache_free

... and as kmem_cache_free() doesn't call itself, setting this as the
filter function for kmem_cache_free() results in no hits, and
consequently the test fails:

  # # + grep kmem_cache_free trace
  # # + grep kmem_cache_free
  # # + wc -l
  # # + hitcnt=0
  # # + grep kmem_cache_free trace
  # # + grep -v kmem_cache_free
  # # + wc -l
  # # + misscnt=0
  # # + [ 0 -eq 0 ]
  # # + exit_fail

This seems to be because the system in question has tasks with ':' in
their name (which a number of kernel worker threads have). These show up
in the trace, e.g.

  test:.sh-1299    [004] .....  2886.040608: kmem_cache_free: call_site=putname+0xa4/0xc8 ptr=000000000f4d22f4 name=names_cache

... and so when we try to extact the call_site with:

  cut -d: -f3 trace | sed 's/call_site=\([^+]*\)+0x.*/\1/'

... the 'cut' command will extrace the column containing
'kmem_cache_free' rather than the column containing 'call_site=...', and
the 'sed' command will leave this unchanged. Consequently, the test will
decide to use 'kmem_cache_free' as the filter function, resulting in the
failure seen above.

Fix this by matching the 'call_site=<func>' part specifically to extract
the function name.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge tag 'drm-intel-fixes-2024-03-28' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes

Core/GT Fixes:
- Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c (Joonas)
- Update a MTL workaround (Tejas)
- Fix locking inversion in hwmon's sysfs (Janusz)
- Remove a bogus error message around PXP (Jose)
- Fix UAF on VMA (Janusz)
- Reset queue_priority_hint on parking (Chris)

Display Fixes:
- Remove duplicated audio enable/disable on SDVO and DP (Ville)
- Disable AuxCCS for Xe driver (Juha-Pekka)
- Revert init order of MIPI DSI (Ville)
- DRRS debugfs fix with an extra refactor patch (Bhanuprakash)
- VRR related fixes (Ville)
- Fix a JSL eDP corruption (Jonathon)
- Fix the cursor physical dma address (Ville)
- BIOS VBT related fix (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZgYaIVgjIs30mIvS@intel.com