- 12 Feb, 2019 40 commits
-
-
Vaibhav Jain authored
commit bb61b843 upstream. Presently when an error is encountered during probe of the cxlflash adapter, a deadlock is seen with cpu thread stuck inside cxlflash_remove(). Below is the trace of the deadlock as logged by khungtaskd: cxlflash 0006:00:00.0: cxlflash_probe: init_afu failed rc=-16 INFO: task kworker/80:1:890 blocked for more than 120 seconds. Not tainted 5.0.0-rc4-capi2-kexec+ #2 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/80:1 D 0 890 2 0x00000808 Workqueue: events work_for_cpu_fn Call Trace: 0x4d72136320 (unreliable) __switch_to+0x2cc/0x460 __schedule+0x2bc/0xac0 schedule+0x40/0xb0 cxlflash_remove+0xec/0x640 [cxlflash] cxlflash_probe+0x370/0x8f0 [cxlflash] local_pci_probe+0x6c/0x140 work_for_cpu_fn+0x38/0x60 process_one_work+0x260/0x530 worker_thread+0x280/0x5d0 kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x80 INFO: task systemd-udevd:5160 blocked for more than 120 seconds. The deadlock occurs as cxlflash_remove() is called from cxlflash_probe() without setting 'cxlflash_cfg->state' to STATE_PROBED and the probe thread starts to wait on 'cxlflash_cfg->reset_waitq'. Since the device was never successfully probed the 'cxlflash_cfg->state' never changes from STATE_PROBING hence the deadlock occurs. We fix this deadlock by setting the variable 'cxlflash_cfg->state' to STATE_PROBED in case an error occurs during cxlflash_probe() and just before calling cxlflash_remove(). Cc: stable@vger.kernel.org Fixes: c21e0bbf("cxlflash: Base support for IBM CXL Flash Adapter") Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit a1960e0f upstream. The send_xchar() and tiocmset() tty operations are optional. Add the missing sanity checks to prevent user-space triggerable NULL-pointer dereferences. Fixes: 6b9ad1c7 ("staging: speakup: add send_xchar, tiocmset and input functionality for tty") Cc: stable <stable@vger.kernel.org> # 4.13 Cc: Okash Khawaja <okash.khawaja@gmail.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Paul Elder authored
commit c418fd6c upstream. Handling short packets (length < max packet size) in the Inventra DMA engine in the MUSB driver causes the MUSB DMA controller to hang. An example of a problem that is caused by this problem is when streaming video out of a UVC gadget, only the first video frame is transferred. For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be set manually by the driver. This was previously done in musb_g_tx (musb_gadget.c), but incorrectly (all csr flags were cleared, and only MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY were set). Fixing that problem allows some requests to be transferred correctly, but multiple requests were often put together in one USB packet, and caused problems if the packet size was not a multiple of 4. Instead, set MUSB_TXCSR_TXPKTRDY in dma_controller_irq (musbhsdma.c), just like host mode transfers. This topic was originally tackled by Nicolas Boichat [0] [1] and is discussed further at [2] as part of his GSoC project [3]. [0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU [1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9 [2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html [3] http://elinux.org/BeagleBoard/GSoC/USBSniffer Fixes: 550a7375 ("USB: Add MUSB and TUSB support") Signed-off-by:
Paul Elder <paul.elder@ideasonboard.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 07c69f11 upstream. (!x & y) strikes again. Fix bitwise and boolean operations by enclosing the expression: intcsr & (1 << NET2272_PCI_IRQ) in parentheses, before applying the boolean operator '!'. Notice that this code has been there since 2011. So, it would be helpful if someone can double-check this. This issue was detected with the help of Coccinelle. Fixes: ceb80363 ("USB: net2272: driver for PLX NET2272 USB device controller") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Tejas Joglekar authored
commit 1e19cdc8 upstream. For OUT endpoints, zero-length transfers require MaxPacketSize buffer as per the DWC_usb3 programming guide 3.30a section 4.2.3.3. This patch fixes this by explicitly checking zero length transfer to correctly pad up to MaxPacketSize. Fixes: c6267a51 ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: stable@vger.kernel.org Signed-off-by:
Tejas Joglekar <joglekar@synopsys.com> Signed-off-by:
-
Bin Liu authored
commit a53469a6 upstream. power off the phy should be done before populate the phy. Otherwise, am335x_init() could be called by the phy owner to power on the phy first, then am335x_phy_probe() turns off the phy again without the caller knowing it. Fixes: 2fc711d7 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
-
Marc Zyngier authored
commit 9791ec7d upstream. On systems or VMs where multiple devices share a single DevID (because they sit behind a PCI bridge, or because the HW is broken in funky ways), we reuse the save its_device structure in order to reflect this. It turns out that there is a distinct lack of locking when looking up the its_device, and two device being probed concurrently can result in double allocations. That's obviously not nice. A solution for this is to have a per-ITS mutex that serializes device allocation. A similar issue exists on the freeing side, which can run concurrently with the allocation. On top of now taking the appropriate lock, we also make sure that a shared device is never freed, as we have no way to currently track the life cycle of such object. Reported-by:
Zheng Xiang <zhengxiang9@huawei.com> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Thomas Gleixner authored
commit 1a1fb985 upstream. commit 56222b21 ("futex: Drop hb->lock before enqueueing on the rtmutex") changed the locking rules in the futex code so that the hash bucket lock is not longer held while the waiter is enqueued into the rtmutex wait list. This made the lock and the unlock path symmetric, but unfortunately the possible early exit from __rt_mutex_proxy_start() due to a detected deadlock was not updated accordingly. That allows a concurrent unlocker to observe inconsitent state which triggers the warning in the unlock path. futex_lock_pi() futex_unlock_pi() lock(hb->lock) queue(hb_waiter) lock(hb->lock) lock(rtmutex->wait_lock) unlock(hb->lock) // acquired hb->lock hb_waiter = futex_top_waiter() lock(rtmutex->wait_lock) __rt_mutex_proxy_start() ---> fail remove(rtmutex_waiter); ---> returns -EDEADLOCK unlock(rtmutex->wait_lock) // acquired wait_lock wake_futex_pi() rt_mutex_next_owner() --> returns NULL --> WARN lock(hb->lock) unqueue(hb_waiter) The problem is caused by the remove(rtmutex_waiter) in the failure case of __rt_mutex_proxy_start() as this lets the unlocker observe a waiter in the hash bucket but no waiter on the rtmutex, i.e. inconsistent state. The original commit handles this correctly for the other early return cases (timeout, signal) by delaying the removal of the rtmutex waiter until the returning task reacquired the hash bucket lock. Treat the failure case of __rt_mutex_proxy_start() in the same way and let the existing cleanup code handle the eventual handover of the rtmutex gracefully. The regular rt_mutex_proxy_start() gains the rtmutex waiter removal for the failure case, so that the other callsites are still operating correctly. Add proper comments to the code so all these details are fully documented. Thanks to Peter for helping with the analysis and writing the really valuable code comments. Fixes: 56222b21 ("futex: Drop hb->lock before enqueueing on the rtmutex") Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Co-developed-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Leonid Iziumtsev authored
commit 341198ed upstream. Once the "ld_queue" list is not empty, next descriptor will migrate into "ld_active" list. The "desc" variable will be overwritten during that transition. And later the dmaengine_desc_get_callback_invoke() will use it as an argument. As result we invoke wrong callback. That behaviour was in place since: commit fcaaba6c ("dmaengine: imx-dma: fix callback path in tasklet"). But after commit 4cd13c21 ("softirq: Let ksoftirqd do its job") things got worse, since possible delay between tasklet_schedule() from DMA irq handler and actual tasklet function execution got bigger. And that gave more time for new DMA request to be submitted and to be put into "ld_queue" list. It has been noticed that DMA issue is causing problems for "mxc-mmc" driver. While stressing the system with heavy network traffic and writing/reading to/from sd card simultaneously the timeout may happen: 10013000.sdhci: mxcmci_watchdog: read time out (status = 0x30004900) That often lead to file system corruption. Signed-off-by:
Leonid Iziumtsev <leonid.iziumtsev@gmail.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Lukas Wunner authored
commit 9e528c79 upstream. There are multiple issues with bcm2835_dma_abort() (which is called on termination of a transaction): * The algorithm to abort the transaction first pauses the channel by clearing the ACTIVE flag in the CS register, then waits for the PAUSED flag to clear. Page 49 of the spec documents the latter as follows: "Indicates if the DMA is currently paused and not transferring data. This will occur if the active bit has been cleared [...]" https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf So the function is entering an infinite loop because it is waiting for PAUSED to clear which is always set due to the function having cleared the ACTIVE flag. The only thing that's saving it from itself is the upper bound of 10000 loop iterations. The code comment says that the intention is to "wait for any current AXI transfer to complete", so the author probably wanted to check the WAITING_FOR_OUTSTANDING_WRITES flag instead. Amend the function accordingly. * The CS register is only read at the beginning of the function. It needs to be read again after pausing the channel and before checking for outstanding writes, otherwise writes which were issued between the register read at the beginning of the function and pausing the channel may not be waited for. * The function seeks to abort the transfer by writing 0 to the NEXTCONBK register and setting the ABORT and ACTIVE flags. Thereby, the 0 in NEXTCONBK is sought to be loaded into the CONBLK_AD register. However experimentation has shown this approach to not work: The CONBLK_AD register remains the same as before and the CS register contains 0x00000030 (PAUSED | DREQ_STOPS_DMA). In other words, the control block is not aborted but merely paused and it will be resumed once the next DMA transaction is started. That is absolutely not the desired behavior. A simpler approach is to set the channel's RESET flag instead. This reliably zeroes the NEXTCONBK as well as the CS register. It requires less code and only a single MMIO write. This is also what popular user space DMA drivers do, e.g.: https://github.com/metachris/RPIO/blob/master/source/c_pwm/pwm.c Note that the spec is contradictory whether the NEXTCONBK register is writeable at all. On the one hand, page 41 claims: "The value loaded into the NEXTCONBK register can be overwritten so that the linked list of Control Block data structures can be dynamically altered. However it is only safe to do this when the DMA is paused." On the other hand, page 40 specifies: "Only three registers in each channel's register set are directly writeable (CS, CONBLK_AD and DEBUG). The other registers (TI, SOURCE_AD, DEST_AD, TXFR_LEN, STRIDE & NEXTCONBK), are automatically loaded from a Control Block data structure held in external memory." Fixes: 96286b57 ("dmaengine: Add support for BCM2835") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.14+ Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Florian Meier <florian.meier@koalo.de> Cc: Clive Messer <clive.m.messer@gmail.com> Cc: Matthias Reichl <hias@horus.com> Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Florian Kauer <florian.kauer@koalo.de> Signed-off-by:
-
Lukas Wunner authored
commit f7da7782 upstream. If IRQ handlers are threaded (either because CONFIG_PREEMPT_RT_BASE is enabled or "threadirqs" was passed on the command line) and if system load is sufficiently high that wakeup latency of IRQ threads degrades, SPI DMA transactions on the BCM2835 occasionally break like this: ks8851 spi0.0: SPI transfer timed out bcm2835-dma 3f007000.dma: DMA transfer could not be terminated ks8851 spi0.0 eth2: ks8851_rdfifo: spi_sync() failed The root cause is an assumption made by the DMA driver which is documented in a code comment in bcm2835_dma_terminate_all(): /* * Stop DMA activity: we assume the callback will not be called * after bcm_dma_abort() returns (even if it does, it will see * c->desc is NULL and exit.) */ That assumption falls apart if the IRQ handler bcm2835_dma_callback() is threaded: A client may terminate a descriptor and issue a new one before the IRQ handler had a chance to run. In fact the IRQ handler may miss an *arbitrary* number of descriptors. The result is the following race condition: 1. A descriptor finishes, its interrupt is deferred to the IRQ thread. 2. A client calls dma_terminate_async() which sets channel->desc = NULL. 3. The client issues a new descriptor. Because channel->desc is NULL, bcm2835_dma_issue_pending() immediately starts the descriptor. 4. Finally the IRQ thread runs and writes BCM2835_DMA_INT to the CS register to acknowledge the interrupt. This clears the ACTIVE flag, so the newly issued descriptor is paused in the middle of the transaction. Because channel->desc is not NULL, the IRQ thread finalizes the descriptor and tries to start the next one. I see two possible solutions: The first is to call synchronize_irq() in bcm2835_dma_issue_pending() to wait until the IRQ thread has finished before issuing a new descriptor. The downside of this approach is unnecessary latency if clients desire rapidly terminating and re-issuing descriptors and don't have any use for an IRQ callback. (The SPI TX DMA channel is a case in point.) A better alternative is to make the IRQ thread recognize that it has missed descriptors and avoid finalizing the newly issued descriptor. So first of all, set the ACTIVE flag when acknowledging the interrupt. This keeps a newly issued descriptor running. If the descriptor was finished, the channel remains idle despite the ACTIVE flag being set. However the ACTIVE flag can then no longer be used to check whether the channel is idle, so instead check whether the register containing the current control block address is zero and finalize the current descriptor only if so. That way, there is no impact on latency and throughput if the client doesn't care for the interrupt: Only minimal additional overhead is introduced for non-cyclic descriptors as one further MMIO read is necessary per interrupt to check for idleness of the channel. Cyclic descriptors are sped up slightly by removing one MMIO write per interrupt. Fixes: 96286b57 ("dmaengine: Add support for BCM2835") Signed-off-by:
-
Miklos Szeredi authored
commit 97e1532e upstream. Dereferencing req->page_descs[0] will Oops if req->max_pages is zero. Reported-by: syzbot+c1e36d30ee3416289cc0@syzkaller.appspotmail.com Tested-by: syzbot+c1e36d30ee3416289cc0@syzkaller.appspotmail.com Fixes: b2430d75 ("fuse: add per-page descriptor <offset, length> to fuse_req") Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit a2ebba82 upstream. NR_WRITEBACK_TEMP is accounted on the temporary page in the request, not the page cache page. Fixes: 8b284dc4 ("fuse: writepages: handle same page rewrites") Cc: <stable@vger.kernel.org> # v3.13 Signed-off-by:
-
Jann Horn authored
commit 9509941e upstream. Some of the pipe_buf_release() handlers seem to assume that the pipe is locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page without taking any extra locks. From a glance through the callers of pipe_buf_release(), it looks like FUSE is the only one that calls pipe_buf_release() without having the pipe locked. This bug should only lead to a memory leak, nothing terrible. Fixes: dd3bb14f ("fuse: support splice() writing to fuse device") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 305a0ade upstream. In the current code, the codec registration may happen both at the codec bind time and the end of the controller probe time. In a rare occasion, they race with each other, leading to Oops due to the still uninitialized card device. This patch introduces a simple flag to prevent the codec registration at the codec bind time as long as the controller probe is going on. The controller probe invokes snd_card_register() that does the whole registration task, and we don't need to register each piece beforehand. Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Charles Keepax authored
commit 4f2ab5e1 upstream. It is normal user behaviour to start, stop, then start a stream again without closing it. Currently this works for compressed playback streams but not capture ones. The states on a compressed capture stream go directly from OPEN to PREPARED, unlike a playback stream which moves to SETUP and waits for a write of data before moving to PREPARED. Currently however, when a stop is sent the state is set to SETUP for both types of streams. This leaves a capture stream in the situation where a new start can't be sent as that requires the state to be PREPARED and a new set_params can't be sent as that requires the state to be OPEN. The only option being to close the stream, and then reopen. Correct this issues by allowing snd_compr_drain_notify to set the state depending on the stream direction, as we already do in set_params. Fixes: 49bb6402 ("ALSA: compress_core: Add support for capture streams") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Rundong Ge authored
[ Upstream commit 17ab4f61 ] The unbalance of master's promiscuity or allmulti will happen after ifdown and ifup a slave interface which is in a bridge. When we ifdown a slave interface , both the 'dsa_slave_close' and 'dsa_slave_change_rx_flags' will clear the master's flags. The flags of master will be decrease twice. In the other hand, if we ifup the slave interface again, since the slave's flags were cleared the 'dsa_slave_open' won't set the master's flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if' will set the master's flags. The flags of master is increase once. Only propagating flag changes when a slave interface is up makes sure this does not happen. The 'vlan_dev_change_rx_flags' had the same problem and was fixed, and changes here follows that fix. Fixes: 91da11f8 ("net: Distributed Switch Architecture protocol support") Signed-off-by:
Rundong Ge <rdong.ge@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Cong Wang authored
[ Upstream commit e8c8b53c ] When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, we have a switch which pads non-zero octets, this causes kernel hardware checksum fault repeatedly. Prior to: commit '88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE ...")' skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated, like what we do for RXFCS. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it is not worthy the effort as the packets are so small that CHECKSUM_COMPLETE can't save anything. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), Cc: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Nikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 8dfb8d2c ] Broadcom STB chips support a deep sleep mode where all register contents are lost. Because we were stashing the MagicPacket password into some of these registers a suspend into that deep sleep then a resumption would not lead to being able to wake-up from MagicPacket with password again. Fix this by keeping a software copy of the password and program it during suspend. Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6fa19f56 ] syzbot was able to catch a bug in rds [1] The issue here is that the socket might be found in a hash table but that its refcount has already be set to 0 by another cpu. We need to use refcount_inc_not_zero() to be safe here. [1] refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked lib/refcount.c:153 [inline] WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23129 Comm: syz-executor3 Not tainted 5.0.0-rc4+ #53 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x48 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:153 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Code: 1d 51 63 c8 06 31 ff 89 de e8 eb 1b f2 fd 84 db 75 dd e8 a2 1a f2 fd 48 c7 c7 60 9f 81 88 c6 05 31 63 c8 06 01 e8 af 65 bb fd <0f> 0b eb c1 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 RSP: 0018:ffff8880a0cbf1e8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90006113000 RDX: 000000000001047d RSI: ffffffff81685776 RDI: 0000000000000005 RBP: ffff8880a0cbf1f8 R08: ffff888097c9e100 R09: ffffed1015ce5021 R10: ffffed1015ce5020 R11: ffff8880ae728107 R12: ffff8880723c20c0 R13: ffff8880723c24b0 R14: dffffc0000000000 R15: ffffed1014197e64 sock_hold include/net/sock.h:647 [inline] rds_sock_addref+0x19/0x20 net/rds/af_rds.c:675 rds_find_bound+0x97c/0x1080 net/rds/bind.c:82 rds_recv_incoming+0x3be/0x1430 net/rds/recv.c:362 rds_loop_xmit+0xf3/0x2a0 net/rds/loop.c:96 rds_send_xmit+0x1355/0x2a10 net/rds/send.c:355 rds_sendmsg+0x323c/0x44e0 net/rds/send.c:1368 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:631 __sys_sendto+0x387/0x5f0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto net/socket.c:1796 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1796 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458089 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc266df8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 0000000000458089 RDX: 0000000000000000 RSI: 00000000204b3fff RDI: 0000000000000005 RBP: 000000000073bf00 R08: 00000000202b4000 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc266df96d4 R13: 00000000004c56e4 R14: 00000000004d94a8 R15: 00000000ffffffff Fixes: cc4dfb7f ("rds: fix two RCU related problems") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 294c149a ] The "p" buffer is 0x4000 bytes long. B3_RI_WTO_R1 is 0x190. The value of "regs->len" is in the 1-0x4000 range. The bug here is that "regs->len - B3_RI_WTO_R1" can be a negative value which would lead to memory corruption and an abrupt crash. Fixes: c3f8be96 ("[PATCH] skge: expand ethtool debug register dump") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6dce3c20 ] When either "goto wait_interrupted;" or "goto wait_error;" paths are taken, socket lock has already been released. This patch fixes following syzbot splat : WARNING: bad unlock balance detected! 5.0.0-rc4+ #59 Not tainted ------------------------------------- syz-executor223/8256 is trying to release lock (sk_lock-AF_RXRPC) at: [<ffffffff86651353>] rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 but there are no more locks to release! other info that might help us debug this: 1 lock held by syz-executor223/8256: #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2798 stack backtrace: CPU: 1 PID: 8256 Comm: syz-executor223 Not tainted 5.0.0-rc4+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_unlock_imbalance_bug kernel/locking/lockdep.c:3391 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3368 __lock_release kernel/locking/lockdep.c:3601 [inline] lock_release+0x67e/0xa00 kernel/locking/lockdep.c:3860 sock_release_ownership include/net/sock.h:1471 [inline] release_sock+0x183/0x1c0 net/core/sock.c:2808 rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg net/socket.c:801 [inline] sock_recvmsg+0xd0/0x110 net/socket.c:797 __sys_recvfrom+0x1ff/0x350 net/socket.c:1845 __do_sys_recvfrom net/socket.c:1863 [inline] __se_sys_recvfrom net/socket.c:1859 [inline] __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:1859 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446379 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe5da89fd98 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00000000006dbc28 RCX: 0000000000446379 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c R13: 0000000000000000 R14: 0000000000000000 R15: 20c49ba5e353f7cf Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 53bc8d2a ] During sendmsg() a cloned skb is saved via dp83640_txtstamp() in ->tx_queue. After the NIC sends this packet, the PHY will reply with a timestamp for that TX packet. If the cable is pulled at the right time I don't see that packet. It might gets flushed as part of queue shutdown on NIC's side. Once the link is up again then after the next sendmsg() we enqueue another skb in dp83640_txtstamp() and have two on the list. Then the PHY will send a reply and decode_txts() attaches it to the first skb on the list. No crash occurs since refcounting works but we are one packet behind. linuxptp/ptp4l usually closes the socket and opens a new one (in such a timeout case) so those "stale" replies never get there. However it does not resume normal operation anymore. Purge old skbs in decode_txts(). Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Kurt Kanzenbach <kurt@linutronix.de> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit 7596175e ] In case of IPv6 pkts, ipv4_csum_ok is 0. Because of this, driver does not set skb->ip_summed. So IPv6 rx checksum is not offloaded. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9b1f19d8 ] Similarly to commit 276bdb82 ("dccp: check ccid before dereferencing") it is wise to test for a NULL ccid. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3+ #37 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b kobject: 'loop5' (0000000080f78fc1): kobject_uevent_env RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 000000008db5e000 CR4: 00000000001406e0 kobject: 'loop5' (0000000080f78fc1): fill_kobj_path: path = '/devices/virtual/block/loop5' DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_rcv_state_process+0x2b6/0x1af6 net/dccp/input.c:654 dccp_v4_do_rcv+0x100/0x190 net/dccp/ipv4.c:688 sk_backlog_rcv include/net/sock.h:936 [inline] __sk_receive_skb+0x3a9/0xea0 net/core/sock.c:473 dccp_v4_rcv+0x10cb/0x1f80 net/dccp/ipv4.c:880 ip_protocol_deliver_rcu+0xb6/0xa20 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1f0/0x740 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1f4/0x2f0 net/ipv4/ip_input.c:414 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xed/0x620 net/ipv4/ip_input.c:524 __netif_receive_skb_one_core+0x160/0x210 net/core/dev.c:4973 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5083 process_backlog+0x206/0x750 net/core/dev.c:5923 napi_poll net/core/dev.c:6346 [inline] net_rx_action+0x76d/0x1930 net/core/dev.c:6412 __do_softirq+0x30b/0xb11 kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:654 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646 smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace 58a0ba03bea2c376 ]--- RIP: 0010:ccid_hc_tx_parse_options net/dccp/ccid.h:205 [inline] RIP: 0010:dccp_parse_options+0x8d9/0x12b0 net/dccp/options.c:233 Code: c5 0f b6 75 b3 80 38 00 0f 85 d6 08 00 00 48 b9 00 00 00 00 00 fc ff df 48 8b 45 b8 4c 8b b8 f8 07 00 00 4c 89 f8 48 c1 e8 03 <80> 3c 08 00 0f 85 95 08 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b RSP: 0018:ffff8880a94df0b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880858ac723 RCX: dffffc0000000000 RDX: 0000000000000100 RSI: 0000000000000007 RDI: 0000000000000001 RBP: ffff8880a94df140 R08: 0000000000000001 R09: ffff888061b83a80 R10: ffffed100c370752 R11: ffff888061b83a97 R12: 0000000000000026 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0defa33518 CR3: 0000000009871000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Signed-off-by:
-
Eduardo Valentin authored
commit 03334ba8 upstream. Avoid warnings like this: thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function] thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) Fixes: 0dd88793 ("thermal: hwmon: move hwmon support to single file") Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Du Changbin authored
[ Upstream commit b058809b ] A bug is present in GDB which causes early string termination when parsing variables. This has been reported [0], but we should ensure that we can support at least basic printing of the core kernel strings. For current gdb version (has been tested with 7.3 and 8.1), 'lx-version' only prints one character. (gdb) lx-version L(gdb) This can be fixed by casting 'linux_banner' as (char *). (gdb) lx-version Linux version 4.19.0-rc1+ (changbin@acer) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21 SMP Sat Sep 1 21:43:30 CST 2018 [0] https://sourceware.org/bugzilla/show_bug.cgi?id=20077 [kbingham@kernel.org: add detail to commit message] Link: http://lkml.kernel.org/r/20181111162035.8356-1-kieran.bingham@ideasonboard.com Fixes: 2d061d99 ("scripts/gdb: add version command") Signed-off-by:
Du Changbin <changbin.du@gmail.com> Signed-off-by:
Kieran Bingham <kbingham@kernel.org> Acked-by:
Jan Kiszka <jan.kiszka@siemens.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Oleg Nesterov authored
[ Upstream commit 8099b047 ] load_script() simply truncates bprm->buf and this is very wrong if the length of shebang string exceeds BINPRM_BUF_SIZE-2. This can silently truncate i_arg or (worse) we can execute the wrong binary if buf[2:126] happens to be the valid executable path. Change load_script() to return ENOEXEC if it can't find '\n' or zero in bprm->buf. Note that '\0' can come from either prepare_binprm()->memset() or from kernel_read(), we do not care. Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.comSigned-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Ben Woodard <woodard@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Davidlohr Bueso authored
[ Upstream commit 76699a67 ] The ep->ovflist is a secondary ready-list to temporarily store events that might occur when doing sproc without holding the ep->wq.lock. This accounts for every time we check for ready events and also send events back to userspace; both callbacks, particularly the latter because of copy_to_user, can account for a non-trivial time. As such, the unlikely() check to see if the pointer is being used, seems both misleading and sub-optimal. In fact, we go to an awful lot of trouble to sync both lists, and populating the ovflist is far from an uncommon scenario. For example, profiling a concurrent epoll_wait(2) benchmark, with CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33% incorrect rate was seen; and when incrementally increasing the number of epoll instances (which is used, for example for multiple queuing load balancing models), up to a 90% incorrect rate was seen. Similarly, by deleting the prediction, 3% throughput boost was seen across incremental threads. Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Reviewed-by:
-
Liu, Chuansheng authored
[ Upstream commit 168e06f7 ] Based on commit 401c636a ("kernel/hung_task.c: show all hung tasks before panic"), we could get the call stack of hung task. However, if the console loglevel is not high, we still can not see the useful panic information in practice, and in most cases users don't set console loglevel to high level. This patch is to force console verbose before system panic, so that the real useful information can be seen in the console, instead of being like the following, which doesn't have hung task information. INFO: task init:1 blocked for more than 120 seconds. Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Kernel panic - not syncing: hung_task: blocked tasks CPU: 2 PID: 479 Comm: khungtaskd Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1 Call Trace: dump_stack+0x4f/0x65 panic+0xde/0x231 watchdog+0x290/0x410 kthread+0x12c/0x150 ret_from_fork+0x35/0x40 reboot: panic mode set: p,w Kernel Offset: 0x34000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A6015B675@SHSMSX101.ccr.corp.intel.comSigned-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Cheng Lin authored
[ Upstream commit 09be1784 ] If the number of input parameters is less than the total parameters, an EINVAL error will be returned. For example, we use proc_doulongvec_minmax to pass up to two parameters with kern_table: { .procname = "monitor_signals", .data = &monitor_sigs, .maxlen = 2*sizeof(unsigned long), .mode = 0644, .proc_handler = proc_doulongvec_minmax, }, Reproduce: When passing two parameters, it's work normal. But passing only one parameter, an error "Invalid argument"(EINVAL) is returned. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals -bash: echo: write error: Invalid argument [root@cl150 ~]# echo $? 1 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# The following is the result after apply this patch. No error is returned when the number of input parameters is less than the total parameters. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# echo $? 0 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# There are three processing functions dealing with digital parameters, __do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax. This patch deals with __do_proc_doulongvec_minmax, just as __do_proc_dointvec does, adding a check for parameters 'left'. In __do_proc_douintvec, its code implementation explicitly does not support multiple inputs. static int __do_proc_douintvec(...){ ... /* * Arrays are not supported, keep this simple. *Do not* add * support for them. */ if (vleft != 1) { *lenp = 0; return -EINVAL; } ... } So, just __do_proc_doulongvec_minmax has the problem. And most use of proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one parameter. Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cnSigned-off-by:
Cheng Lin <cheng.lin130@zte.com.cn> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Reviewed-by:
-
Tetsuo Handa authored
[ Upstream commit 304ae427 ] check_hung_uninterruptible_tasks() is currently calling rcu_lock_break() for every 1024 threads. But check_hung_task() is very slow if printk() was called, and is very fast otherwise. If many threads within some 1024 threads called printk(), the RCU grace period might be extended enough to trigger RCU stall warnings. Therefore, calling rcu_lock_break() for every some fixed jiffies will be safer. Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Paul E. McKenney <paulmck@linux.ibm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 6ae16dfb ] In lenovo_probe_tpkbd(), the function of_led_classdev_register() could return an error value that is unchecked. The fix adds these checks. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Bjorn Andersson authored
[ Upstream commit 9d216211 ] First correct the edge case to return the last element if we're outside the range, rather than at the last element, so that interpolation is not omitted for points between the two last entries in the table. Then correct the formula to perform linear interpolation based the two points surrounding the read ADC value. The indices for temp are kept as "hi" and "lo" to pair with the adc indices, but there's no requirement that the temperature is provided in descendent order. mult_frac() is used to prevent issues with overflowing the int. Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 162bc7f5 ] If you have a CPU that fails to round up and then run 'btc' you'll end up crashing in kdb becaue we dereferenced NULL. Let's add a check. It's wise to also set the task to NULL when leaving the debugger so that if we fail to round up on a later entry into the debugger we won't backtrace a stale task. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Matthias Brugger authored
[ Upstream commit d56c19d0 ] By defaul of-based thermal driver do not enable hwmon. This patch does this explicitly, so that the temperature can be read through the common hwmon sysfs. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Acked-by:
-
Finn Thain authored
[ Upstream commit 296dcc40 ] When the block device is opened with FMODE_EXCL, ref_count is set to -1. This value doesn't get reset when the device is closed which means the device cannot be opened again. Fix this by checking for refcount <= 0 in the release method. Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Scott Wood authored
[ Upstream commit 0d9c9a23 ] These functions are called from atomic context: [ 9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421 [ 9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip [ 9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876 #29 [ 9.163130] Call Trace: [ 9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable) [ 9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164 [ 9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c [ 9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198 [ 9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218 [ 9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c [ 9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4 [ 9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54 [ 9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8 [ 9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0 [ 9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80 [ 9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08 [ 9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0 [ 9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498 [ 9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c [ 9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c [ 9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318 [ 9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444 [ 9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54 [ 9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8 [ 9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0 [ 9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 093c4821 ] In probe_gdrom(), the buffer pointed by 'gd.cd_info' is allocated through kzalloc() and is used to hold the information of the gdrom device. To register and unregister the device, the pointer 'gd.cd_info' is passed to the functions register_cdrom() and unregister_cdrom(), respectively. However, this buffer is not freed after it is used, which can cause a memory leak bug. This patch simply frees the buffer 'gd.cd_info' in exit_gdrom() to fix the above issue. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 7418e652 ] In drivers/isdn/hisax/hfc_pci.c, the functions hfcpci_interrupt() and HFCPCI_l1hw() may be concurrently executed. HFCPCI_l1hw() line 1173: if (!cs->tx_skb) hfcpci_interrupt() line 942: spin_lock_irqsave(); line 1066: dev_kfree_skb_irq(cs->tx_skb); Thus, a possible concurrency use-after-free bug may occur in HFCPCI_l1hw(). To fix these bugs, the calls to spin_lock_irqsave() and spin_unlock_irqrestore() are added in HFCPCI_l1hw(), to protect the access to cs->tx_skb. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
