- 03 Nov, 2021 8 commits
-
-
Mario Limonciello authored
This was added by commit bd8dcea9 ("drm/amd/pm: add callbacks to read/write sysfs file pp_power_profile_mode") but the feature was deprecated from PMFW. Remove it from the driver. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Graham Sider authored
Previously Renoir compiler gfx target version was forced to Raven. Update driver side for completeness. Signed-off-by:
Graham Sider <Graham.Sider@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Mario Limonciello authored
This is more useful when talking to the SMU team to have the information in this format, save one less step to manually do it. Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Felix Kuehling authored
If some pages fail to migrate to system memory, don't update prange->actual_loc = 0. This prevents endless CPU page faults after partial migration failures due to contested page locks. Migration to RAM must be complete during migrations from VRAM to VRAM and during evictions. Implement retry and fail if the migration to RAM fails. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
-
Felix Kuehling authored
Stack and heap pages tend to be shared by many small allocations. Concurrent access by CPU and GPU is therefore likely, which can lead to thrashing. Avoid this by setting the preferred location to system memory. Signed-off-by:
-
Felix Kuehling authored
The preferred location should be used as the migration destination whenever it is accessible by the faulting GPU. System memory is always accessible. Peer memory is accessible if it's in the same XGMI hive. Signed-off-by:
-
Oak Zeng authored
Aldebaran has different register mask definitions for regiter MC_VM_XGMI_LFB_CNTL. Use the correct masks to interpret fields of this register. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Jingwen Chen authored
[Why] In advance tdr mode, the real bad job will be resubmitted twice, while in drm_sched_resubmit_jobs_ext, there's a dma_fence_put, so the bad job is put one more time than other jobs. [How] Adding dma_fence_get before resbumit job in amdgpu_device_recheck_guilty_jobs and put the fence for normal jobs Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
- 02 Nov, 2021 1 commit
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.16-2021-10-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.16-2021-10-29: amdgpu: - RAS fixes - Fix a potential memory leak in device tear down - Add a stutter mode quirk - Misc display fixes - Further display FP refactoring - Display USB4 fixes - Display DP2.0 fixes - DCN 3.1 fixes - Display 8 ch audio fix - Fix DMA mask regression for SI parts - Aldebaran fixes amdkfd: - userptr fix - BO lifetime fix - Misc code cleanup UAPI: - Minor header cleanup (no functional change) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211029184338.4863-1-alexander.deucher@amd.com
-
- 28 Oct, 2021 31 commits
-
-
Alex Deucher authored
The DMA mask on SI parts is 40 bits not 44. Copy paste typo. Fixes: 244511f3 ("drm/amdgpu: simplify and cleanup setting the dma mask") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1762Acked-by:
Christian König <christian.koenig@amd.com> Tested-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Meenakshikumar Somasundaram authored
[Why] - DPIA MST slot registers are not programmed during payload allocation and hence MST does not work with DPIA. - HPD RX interrupts are not handled for DPIA. [How] - Added inbox command to program the MST slots whenever payload allocation happens for DPIA links. - Added support for handling HPD RX interrupts Signed-off-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Patrik Jakobsson authored
CVE-2021-42327 was fixed by: commit f23750b5 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) Fixes: 918698d5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by:
Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Alex Deucher authored
Add secondary instance version info for soc15 parts. Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
Alex Deucher authored
Add secondary instance version info for vega20, arcturure, and aldebaran. Acked-by:
-
Alex Deucher authored
Move the RAS query parameters to align with the INFO query where they are used. No functional change. Reviewed-by:
-
Jude Shih authored
[Why] DMUB binary is common for both A0 and B0. Hence, driver should notify FW about the support for DPIA in B0. [How] Added dpia_supported bit in dmub_fw_boot_options and will be set only for B0. Assign dpia_supported to true before dm_dmub_hw_init in B0 case. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Signed-off-by:
Jude Shih <shenshih@amd.com> Reviewed-by:
-
Jude Shih authored
[Why] Notify data from outbox corrupt, the notify type should be 2 (HPD) instead of 0 (No data). We copied the address instead of the value. The memory might be freed in the end of outbox IRQ [How] We should allocate the memory of notify and copy the whole content from outbox to hpd handle function Fixes: 88f52b1f ("drm/amd/display: Support for SET_CONFIG processing with DMUB") Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] A deadlock in the kernel occurs when we fallback from the V3 to V2 add_topology_to_display or remove_topology_to_display because they both try to acquire the dtm_mutex but recursive locking isn't supported on mutex_lock(). [How] Make the mutex_lock/unlock more fine grained and move them up such that they're only required for the psp invocation itself. Fixes: bf62221e ("drm/amd/display: Add DCN3.1 HDCP support") Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] On certain configs, SMU clock table voltages don't match which cause parser to behave incorrectly by leaving dcfclk and socclk table entries unpopulated. [HOW] Currently the function that finds the corresponding clock for a given voltage only checks for exact voltage level matches. In the case that no match gets found, parser now falls back to searching for the max clock which meets the requested voltage (i.e. its corresponding voltage is below requested). Signed-off-by:
Michael Strauss <michael.strauss@amd.com> Reviewed-by:
-
Qingqing Zhuo authored
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN301 to DML, where all FPU code should locate. Cc: Christian König <christian.koenig@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
Zhan Liu <Zhan.Liu@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Qingqing Zhuo <Qingqing.Zhuo@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Wenjing Liu authored
[why] We have a regression that cause maximize lane settings to use uninitialized data from unused lanes. This will cause link training to fail for 1 or 2 lanes because the lane adjust is populated incorrectly sometimes. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
-
Wenjing Liu authored
[why] option 1: disallow different lanes to have different lane settings option 2: dpcd lane settings will always use the same hw lane settings even if it doesn't match requested lane adjust Reviewed-by:
-
Wenjing Liu authored
[why] As DP features expands, we have encountered many situations where we must configure a different DPCD lane setting from hw lane settings we output. The change is to decouple hw lane settings from dpcd lane settings to provide flexibility to configure dpcd and hw individually. Reviewed-by:
-
Wenjing Liu authored
[why] Decouple lane settings decision logic all to its own function. The function takes in lane adjust array and link training settings and decide what hw lane setting and dpcd lane setting should be used. Reviewed-by:
-
Wenjing Liu authored
[how] revision 8 SCR requires DP Source to write TPS2 and FFE lane adjustment in one 5 byte write aux transaction. It specifies to read aux rd interval value as soon as we turn on TPS1 pattern. Cc: Wayne Lin <wayne.lin@amd.com> Acked-by:
-
Meenakshikumar Somasundaram authored
[Why] To fix the check condition for fec enable for dpia links in MST mode. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled in MST mode. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by:
-
Meenakshikumar Somasundaram authored
[Why] To fix the check condition for fec enable for dpia links. [How] dc_link_should_enable_fec() to be used to check whether fec should be enabled. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by:
-
Jimmy Kizito authored
[Why] Certain docks appear to NAK I2C writes to the segment pointer with the MOT (middle of transaction) bit clear. This behaviour can cause EDID reads from higher segments to fail. [How] Add workaround flag for links which connect to docks exhibiting this issue. Cc: Wayne Lin <wayne.lin@amd.com> Reviewed-by:
-
Hansen authored
[Why] B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or PHYC/PHY D. [How] Based on chip internal hardware revision id determine it is B0 and set DMUB scratch register so DMUBFW can connect the display pipe is connected correctly to the dig. Cc: Wayne Lin <wayne.lin@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Hansen <Hansen.Dsouza@amd.com> Signed-off-by:
-
Martin Leung authored
why: DCN303's 4 channel SOC BB causes problems at strobe how: workaround to manually adjust strobe calculation using FCLK restrict. Reviewed-by:
Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by:
Martin Leung <Martin.Leung@amd.com> Signed-off-by:
-
Aric Cyr authored
This new DC version brings improvements in the following areas: - Improvements for USB4; - Isolate FPU code for DCN20, DCN301, and DSC; - Fixes on Linking training; - Refactoring some parts of the code, such as PSR; Acked-by:
-
Anthony Koo authored
Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Signed-off-by:
-
Anson Jacob authored
fixed16_to_double & fixed16_to_double_to_cpu are not used. Reviewed-by:
Anson Jacob <Anson.Jacob@amd.com> Signed-off-by:
-
Dmytro Laktyushkin authored
This change adds a config flag to allow non fullscreen MPO during ODM. Scaling calculation will still fail configurations where video is only one one side of the screen. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by:
-
Guo, Bing authored
Why: For audio packet type 0x02, there are 2 Layouts: Layout = 0 for 2 channels and Layout = 1 for > 2 channels. Layout will affect bandwidth check. Currently, for HDMI FRL, Layout field isn't set and has a default value of 0, so theoretically only 2-channel audio for audio packet type 0x02 is supported now. How: 1. Set Layout properly according to maximum audio channel numbers for audios with audio packet type 0x02. 2. 8ch LPCM audio is not supported for timing modes with v_active <= 576. Reviewed-by:
Chris Park <chris.park@amd.com> Tested-by:
Bing Guo <Bing.Guo@amd.com> Signed-off-by:
-
Aric Cyr authored
We found a compilation error that we thought was caused by the 3DLUT patch; later on, we figured out the root cause of the problem, but we already applied the revert in the wrong patch. This commit brings it back the 3DLUT fix. Acked-by:
-
Aric Cyr authored
Acked-by:
-
Anthony Koo authored
- Add flag to control root clock gating in init_hw - Add flag to indicate a diags environment is being used Acked-by:
-
Aric Cyr authored
[Why] When writing long AUX commands some sinks will respond will write status update requiring source to read status. [How] When a write request is replied with data (AUX_ACK_M), retry a read of write status to determine when the write is completed. Reviewed-by:
-
George Shen authored
[Why] Currently the naming of preferred_training_settings is ambiguous and has caused confusion regarding its purpose and usage. [How] Add comment to clarify the intention. Reviewed-by:
George Shen <george.shen@amd.com> Signed-off-by:
-
