DPIB is read currently from a buffer position in memory (indicated by
the registers DPIB[U|L]BASE).Driver reads the position buffer on BDL
completion interrupts to report the DMA position. But the BDL completion
interrupt only indicates the last DMA transfer of the buffer is
completed at the Intel HD Audio subsystem boundary. The periodic DMA
Position-in-Buffer writes may be scheduled at the same time or later
than the MSI and does not guarantee to reflect the position of the last
buffer that was transferred.

Whereas DPIB register in HDA space(vendor specific register indicated by
SDxDPIB) reflects the actual data that is transferred. Hence update the
position based on DPIB for playback.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge remote-tracking branches 'asoc/topic/tpa6130a2', 'asoc/topic/ux500', 'asoc/topic/wm8960', 'asoc/topic/wm8962' and 'asoc/topic/wm8991' into asoc-next

Merge remote-tracking branches 'asoc/topic/tas5086', 'asoc/topic/tegra', 'asoc/topic/tlv320aic31xx', 'asoc/topic/tlv320dac33' and 'asoc/topic/topology' into asoc-next

Merge remote-tracking branches 'asoc/topic/sgtl5000', 'asoc/topic/simple', 'asoc/topic/stac9766', 'asoc/topic/sti' and 'asoc/topic/sunxi' into asoc-next

Merge remote-tracking branches 'asoc/topic/rt5659', 'asoc/topic/rt5660', 'asoc/topic/rt5677' and 'asoc/topic/samsung' into asoc-next

Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rockchip' and 'asoc/topic/rt5616' into asoc-next

Merge remote-tracking branches 'asoc/topic/nau8810', 'asoc/topic/of-bool', 'asoc/topic/omap' and 'asoc/topic/platform-drvdata' into asoc-next

Merge remote-tracking branches 'asoc/topic/max98371', 'asoc/topic/max9867', 'asoc/topic/max98926' and 'asoc/topic/mtk' into asoc-next

Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/fsl', 'asoc/topic/gpio-chip' and 'asoc/topic/hdmi' into asoc-next

Merge remote-tracking branches 'asoc/topic/da7218', 'asoc/topic/da7219' and 'asoc/topic/dpcm' into asoc-next

Merge remote-tracking branches 'asoc/topic/cs35l30', 'asoc/topic/cs42l73', 'asoc/topic/cs53l30' and 'asoc/topic/da7213' into asoc-next

Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ak4104', 'asoc/topic/arizona', 'asoc/topic/atmel' and 'asoc/topic/codec-component' into asoc-next

Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/da7219', 'asoc/fix/nau8825', 'asoc/fix/rt5514' and 'asoc/fix/shift' into asoc-linus

The recent series of changes to the caching in the SSI driver have
caused a number of problems to appear in some test systems.  These are
still not fully understood but we're coming up to the merge window so
for now let's revert commit 7de2763d (ASoC: fsl_ssi: Remove
.num_reg_defaults_raw from regmap_config) as backing that out seems to
resolve the problem on affected systems.
Reported-by: Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>

Currently there is a memory leak of module on a ENOMEM return path.
Fix this by kfree'ing module before returning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds SNDRV_PCM_TRIGGER_SUSPEND/RESUME.
Otherwise, it breaks rsnd driver internal start/stop counter
when suspend/resume. This issue was reported/tested by Hiep
Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b ("ALSA: tlv:
add DECLARE_TLV_DB_RANGE()").

This commit removes usage of the macro, with the obsoleting macro renamed
to SNDRV_CTL_TLVD_DECLARE_DB_RANGE().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b ("ALSA: tlv:
add DECLARE_TLV_DB_RANGE()").

This commit removes usage of the macro, with the obsoleting macro renamed
to SNDRV_CTL_TLVD_DECLARE_DB_RANGE().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b ("ALSA: tlv:
add DECLARE_TLV_DB_RANGE()").

This commit removes usage of the macro, with the obsoleting macro renamed
to SNDRV_CTL_TLVD_DECLARE_DB_RANGE().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

Do s/ststem/system/ .
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports a below warning.

sound/soc/codecs/da7219.c:804:57: warning: dubious: x & !y

The line includes a condition statement; '(a < b) & !c'. Practically, the
evaluated value of this statement equals to the value of '(a < b) && !c'.
Although, it's not an usual way to use bitwise operations as logical
operations to several conditions.

This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This hardware supports only 2-channel DAI, even mono ADC digital output
has two channels with the same data.

Having min_channels=1 results in broken playback of mono files in setups
where CPU DAI supports mono.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

As long as reading datasheet of STAC9766/9767, this driver includes wrong
usage of DECLARE_TLV_DB_LINEAR().

In "8.1.2. Master Volume Registers", attenuation of lineout volumes is
represented in 5 bits by -1.5 dB/step from 0 to -46.5 dB. Thus,
'master_tlv' should be dB step representation.

In "8.1.14. Record Gain", gain of volumes is represented in 4 bits by
1.5 dB/step from 0 to 22.5 dB. Thus, 'record_tlv' should be dB step
representation.

In "8.1.5. PC BEEP Volume", attenuation of volume is represented in 4 bits
by -3 dB/step from 0 to 45 dB. Thus, 'beep_tlv' should be dB step
representation.

In "8.1.7. Stereo or Mic Volume" and so on, gain of volumes is represented
in 5 bits by -1.5 dB from 12 to -34.5 dB. Thus, 'mix_tlv' should be dB
step representation.

Totally, current implementation includes misuse of TLV-related macro.

This commit replaces usage of DECLARE_TLV_DB_LINEAR() with
SNDRV_CTL_TLVD_DECLARE_DB_SCALE(), to give proper information to
applications in user land.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

This driver has some unused variables. They should be removed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

As long as reading datasheet of WM8991, this driver includes wrong usage
of DECLARE_TLV_DB_LINEAR().

In "Table 6 Input PGA Volume Range", volume is represented in 5 bits by
1.5 dB/step between -16.5/30.0 dB. Thus, 'in_pga_tlv' should be dB step
representation.

In "Table 34 LOMIX and ROMIX Volume Range", volume is represented in three
bits by -3 dB/step from 0 to -21 dB. Thus, 'out_mix_tlv' should be dB step
represenation.

In "Table 36 LOPGA, ROPGA, LOUT, ROUT and SPKVOL Volume Range", volume is
represented in 7 bits by 1 dB/step from -73 to 6 dB, including mute. Thus,
'out_pga_tlv' should be dB step representation.

In "Table 26 Digital Volume Range", volume is represented in 8 bits by
3/8 dB/step from -71.625 to 0 dB. Thus, 'out_dac_tlv' should be dB step
representation.

In "Table 16 ADC Digital Volume Range", volume is represented in 8 bits by
3/8 dB/step from -71.625 to 17.625 dB. Thus, 'in_adc_tlv' should be dB step
representation.

In "Table 23 Digital Sidetone Volume", volume is represented in 5 bits by
3 dB/step from -36 to 0 dB. Thus, 'out_sidetone_tlv' should be dB step
representation.

In "Table 12 Left Input Mixer Volume Control", volume is represented in
3 bits by 3 dB/step from -12 to 6 dB

Totally, current implementation includes misuse of TLV-related macro.

This commit replaces usage of DECLARE_TLV_DB_LINEAR() with proper macros,
to give proper information to applications in user land.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports a below warning.

tpa6130a2.c:193:33: warning: symbol 'tpa6130a2_component_driver' was not declared. Should it be static?

The symbol is just used inner the file. Forthermore, it's constant. Thus,
it's better to add static and const qualifier.

This commit adds it.

Fixes: cb7e6225 (ASoC: tpa6130a2: Register component)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports below warnings.

bxt_rt298.c:275:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:290:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:304:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:317:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:331:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:344:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:357:9: warning: obsolete array initializer, use C99 syntax

There's no need to use obsoleted way. This commit fixes it.

Fixes: 76016322 (ASoC: Intel: Add Broxton-P machine driver)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports below warnings.

bxt_da7219_max98357a.c:250:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:275:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:290:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:304:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:317:9: warning: obsolete array initializer, use C99 syntax

There's no need to use obsoleted way. This commit fixes it.

Fixes: 723bad3f (ASoC: Intel: Add Broxton-P Dialog Maxim machine driver)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports below warnings.

rt5616.c:1270:24: warning: symbol 'rt5616_aif_dai_ops' was not declared. Should it be static?
rt5616.c:1277:27: warning: symbol 'rt5616_dai' was not declared. Should it be static?

These two symbols are just used inner the file, thus it's better to add
static qualifier.

This commit adds it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

The later Arizona parts do run write sequences to power up and down the
speaker path as such a delay needs to be inserted into the DAPM sequence
to allow this to run. This patch adds appropriate delays into the
existing coalesced delay scheme.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When debugging it is useful to check the total power up/down delay that
is executed as part of the coalesced output delay. This patch adds some
debug prints for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add channel and rate constraints for Refcap and dmiccap devices
respectively.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When operating the BE, we should print out the dai_link name of BE other
than FE. This is useful when analyzing the kernel log.
Signed-off-by: Donglin Peng <pengdonglin@smartisan.com>
Signed-off-by: Mark Brown <broonie@kernel.org>