- 22 Jan, 2023 40 commits
-
-
Tomi Valkeinen authored
Add a subdev capability flag to expose to userspace if a subdev supports multiplexed streams. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Tomi Valkeinen authored
Add subdev flag V4L2_SUBDEV_FL_STREAMS. It is used to indicate that the subdev supports the new API with multiplexed streams (routing, stream configs). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Tomi Valkeinen authored
Sort the includes alphabetically. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Yang Yingliang authored
Add missing clk_disable_unprepare(), if imx7_csi_dma_setup() fails in imx7_csi_init(). Fixes: ff43ca91 ("media: imx: imx7-media-csi: Move CSI configuration before source start") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Jiasheng Jiang authored
Add check for the return value of devm_regulator_get since it may return error pointer. Fixes: 448de7e7 ("[media] omap3isp: OMAP3 ISP core") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
-
Xavier Roumegue authored
In case the IRQ allocation returns an error in dw100_probe(), the pm runtime is not disabled before to return. Add the missing unwind goto on the error handling path of the IRQ allocation request. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Xavier Roumegue <xavier.roumegue@oss.nxp.com> Signed-off-by:
-
Marek Vasut authored
The power-domains property is mandatory on i.MX8M Quad and Mini. Document the property and mark it as required on the aforementioned variants of the IP, present in those SoCs. Signed-off-by:
Marek Vasut <marex@denx.de> Acked-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Miaoqian Lin authored
There is no media_graph_walk_free(). media_graph_walk_cleanup() is used to release the resources. Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
Document the function parameters, the requirements on the pad0 and pad1 arguments, the locking requirements and the return value. Also improve the documentation of the corresponding .has_pad_interdep() operation, stating clearly that the operation must be called through the media_entity_has_pad_interdep() function only. Signed-off-by:
-
Gaosheng Cui authored
The memory of ctx is allocated in cal_ctx_create(), but it will not be freed when cal_ctx_v4l2_init() fails, so add kfree() when cal_ctx_v4l2_init() fails to fix it. Fixes: d68a94e9 ("media: ti-vpe: cal: Split video device initialization and registration") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Laurent Pinchart authored
The power-up GMSL link configuration is controlled by the HIM and BWS pins, whose state is reflected in register 0x1c. Print the detected power-up config in a debug message to help debugging. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Laurent Pinchart authored
GMSL can transport three synchronization signals: VSync, HSync and Data Enable. The MAX9286 can select either HS or DE as a line valid signal. Not all serializers (and transmission formats) support the DE signal. The MAX9271, used by the RDACM20 and RDACM21 cameras, doesn't document DE support. Nonetheless, the max9286 driver selects the DE signal as line valid in register 0x0c (by not setting the DESEL bit). It's not clear why this works. As HS is a more common line valid qualifier, set the DESEL bit by default. This is needed to support the onsemi MARS cameras. If a camera requires usage of the DE signal in the future, this will need to be made configurable. Signed-off-by:
-
Laurent Pinchart authored
The GMSL serial data bus width is normally selected through the BWS pin. On some systems, the pin may not be wired to the correct value. Support overriding the bus width by software, using the value specified in the device tree. Signed-off-by:
-
Laurent Pinchart authored
Read the maxim,i2c-clock-frequency DT property that specifies the speed of the remote I2C bus, and configure the MAX9286 accordingly. The remote serializers must all have a matching configuration. Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Macros are easier to read than numerical values. Signed-off-by:
-
Laurent Pinchart authored
Add support for 12-bit raw bayer formats to the driver, configuring the GMSL format accordingly. Signed-off-by:
-
Laurent Pinchart authored
The MAX9286_DATATYPE_RAW11 value is used to configure the MAX9286 for 11-bit or 12-bit input data. While 11-bit data is supported on the GMSL side, CSI-2 doesn't have a RAW11 format. 11-bit data is transferred over CSI-2 as RAW12. Rename the macro accordingly to avoid confusion. Signed-off-by:
-
Laurent Pinchart authored
The MAX9286 can generate a framesync signal to synchronize the cameras, using an internal timer. Support this mode of operation and configure it through the .s_frameinterval() operation. If the frame interval is not 0, framesync is switched to manual mode with the specified interval, otherwise automatic mode is used. Signed-off-by:
-
Thomas Nizan authored
Allow users to use one PoC regulator per port, instead of a global regulator. The properties '^port[0-3]-poc-supply$' in the DT node are used to indicate the regulators for individual ports. Signed-off-by:
Thomas Nizan <tnizan@witekio.com> Signed-off-by:
-
Laurent Pinchart authored
The GMSL serial data bus width is normally selected by the BWS pin, but it can also be configured by software. Add a DT property that allows overriding the value of the BWS-selected bus width to support systems whose BWS pin doesn't result in the correct value. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
The I2C speed on the remote side (the I2C master bus of the connected serializers) is configurable, and doesn't need to match the speed of the local bus (the slave bus of the MAX9286). All remote buses must use the same speed, and the MAX9286 needs to be programmed accordingly. Add a new DT property to select the speed to make it configurable. Signed-off-by:
-
Laurent Pinchart authored
Power supplies for the ports can be controlled per port depending on the hardware design. Support per-port supplies in the DT bindings, mutually exclusive with the global supply. Signed-off-by:
-
Mauro Carvalho Chehab authored
Merge tag 'media-uvc-next-20230115' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into media_stage uvcvideo fixes and improvements * tag 'media-uvc-next-20230115' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux: (27 commits) media: uvcvideo: Silence memcpy() run-time false positive warnings media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910 media: uvcvideo: Fix race condition with usb_kill_urb media: uvcvideo: Use standard names for menus media: uvcvideo: Fix power line control for Lenovo Integrated Camera media: uvcvideo: Refactor power_line_frequency_controls_limited media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU media: uvcvideo: Extend documentation of uvc_video_clock_decode() media: uvcvideo: Limit power line control for Acer EasyCamera media: uvcvideo: Refactor __uvc_ctrl_add_mapping media: uvcvideo: Fix handling on Bitmask controls media: uvcvideo: Do not return positive errors in uvc_query_ctrl() media: uvcvideo: Return -EACCES for Wrong state error media: uvcvideo: Improve error logging in uvc_query_ctrl() media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible() media: uvcvideo: Factor out usb_string() calls media: uvcvideo: Limit power line control for Acer EasyCamera media: uvcvideo: Recover stalled ElGato devices media: uvcvideo: Remove void casting for the status endpoint ... Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Jean Delvare authored
Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. As a minor optimization, this also lets us drop of_match_ptr(), as we now know what it will resolve to, we might as well save cpp some work. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> Acked-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. [hverkuil: remove obsolete kerneldoc 'id' documentation] Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
