As of commit 2eaa7909 ("earlycon: Use common framework for
earlycon declarations") it is no longer needer to specify both
EARLYCON_DECLARE() and OF_EARLYCON_DECLARE().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When only a TX DMA channel is specified in DT, pl011_dma_probe() falls
back to looking for the optional RX channel in platform data. What it
doesn't do is check whether that platform data actually exists...

Add the missing check to avoid crashing the kernel.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial8250_em485_init() is supposed to be protected with
p->port.lock spinlock.
This may lead to issues when kmalloc sleeps, so it is better to use
GFP_ATOMIC in this spinlocked context.

Fixes: e490c914 ("tty: Add software emulated RS485 support for 8250")
Reported-by: Ильяс Гасанов <torso.nafi@gmail.com>
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Formally, currently there is no memory leak, but if
serial8250_ports[line] is reused with other 8250 driver, then em485
will be already activated and it will cause issues.

Fixes: e490c914 ("tty: Add software emulated RS485 support for 8250")
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While building with W=1 we were getting build warning:
drivers/tty/tty_audit.c:149:16: warning: variable 'sessionid' set but not used

The local variable sessionid was only assigned the value of
current->sessionid but was never reused. On further inspection it turned
out that there is no need of audit_get_loginuid() also.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit a3f0b77f.

Maarten writes:
	It appears to be wrong and I don't have a good idea how to fix
	it yet.

Cc: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

Add support for manual getting the modem control lines.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for manual setting the modem control lines.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IS_ERR_VALUE() assumes that its parameter is an unsigned long.
It can not be used to check if an unsigned int reflects an error.
Doing so can result in the following build warning.

drivers/tty/serial/digicolor-usart.c: In function ‘digicolor_uart_probe’:
include/linux/err.h:21:38: warning:
	comparison is always false due to limited range of data type
drivers/tty/serial/digicolor-usart.c:485:6: note:
	in expansion of macro ‘IS_ERR_VALUE’

If that warning is seen, an error return from platform_get_irq() is missed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IS_ERR_VALUE() assumes that its parameter is an unsigned long.
It can not be used to check if an unsigned int reflects an error.
Doing so can result in the following build warning.

drivers/tty/serial/clps711x.c: In function ‘uart_clps711x_probe’:
include/linux/err.h:21:38: warning:
	comparison is always false due to limited range of data type
drivers/tty/serial/clps711x.c:471:6: note: in expansion of macro ‘IS_ERR_VALUE’

If that warning is seen, an error return from platform_get_irq() is missed.

Use a temporary variable to check for errors from platform_get_irq().
Also don't use IS_ERR_VALUE() to check if an integer variable is < 0.
The variable can be checked directly in that case.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes error condition check when requesting the irq,
that would not trigger because of uart_port.irq being
defined as unsigned int.

Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Declare an OF early console for Tegra so that the early console device
can be specified via the "stdout-path" property in device-tree.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The mtk8250_runtime_suspend function is not used when runtime PM is
disabled, so we get a warning about an unused function:

drivers/tty/serial/8250/8250_mtk.c:119:12: error: 'mtk8250_runtime_suspend' defined but not used [-Werror=unused-function]
 static int mtk8250_runtime_suspend(struct device *dev)

This marks all the PM functions as __maybe_unused to avoid the warning,
and removes the #ifdef around the PM_SLEEP functions for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the baudrate calculation for 24 MHz XTAL clock found on gxbb platforms.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since Thadeu left IBM, jsm has gone mostly unmaintained, since his email
address doesn't work anymore.  I'm stepping up to help maintain this
driver upstream.

I'm adding Thadeu's personal e-mail address in Cc, hoping that we can
get his ack.
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Thadeu Cascardo <cascardo@cascardo.eti.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the fixes in here, and this resolves a merge error in tty_io.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull char/misc driver fixes from Greg KH:
 "Here are 3 fixes for some reported issues.  Two nvmem driver fixes,
  and one mei fix.  All have been in linux-next just fine"

* tag 'char-misc-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: qfprom: Specify LE device endianness
  nvmem: core: return error for non word aligned access
  mei: validate request value in client notify request ioctl

Pull driver core fix from Greg KH:
 "Here is one driver core, well klist, fix for 4.5-rc4.

  It fixes a problem found in the scsi device list traversal that
  probably also could be triggered by other subsystems.

  The fix has been in linux-next for a while with no reported problems"

* tag 'driver-core-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  klist: fix starting point removed bug in klist iterators

Pull tty/serial fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for 4.5-rc4
  that resolve some reported issues.

  One of them got reverted as it wasn't correct based on testing, and
  all have been in linux-next for a while"

* tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "8250: uniphier: allow modular build with 8250 console"
  pty: make sure super_block is still valid in final /dev/tty close
  pty: fix possible use after free of tty->driver_data
  tty: Add support for PCIe WCH382 2S multi-IO card
  serial/omap: mark wait_for_xmitr as __maybe_unused
  serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
  8250: uniphier: allow modular build with 8250 console
  tty: Drop krefs for interrupted tty lock

Pull PHY fixes from Greg KH:
 "Here are a couple of PHY driver fixes for 4.5-rc4.

  A few small phy issues.  All have been in linux-next with no reported
  issues"

* tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
  phy: twl4030-usb: Relase usb phy on unload
  phy: core: fix wrong err handle for phy_power_on
  phy: Restrict phy-hi6220-usb to HiSilicon arm64

Pull perf tooling fixes from Thomas Gleixner:
 "Another round of fixes for the perf tooling side:

   - Prevent a NULL pointer dereference in tracepoint error handling

   - Fix a thread handling bug in the intel_pt error handling code

   - Search both .eh_frame and .debug_frame sections as toolchains seem
     to have random choices of storing the CFI information

   - Fix the perf state interval output values, which got broken when
     fixing the overall output"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf stat: Fix interval output values
  perf probe: Search both .eh_frame and .debug_frame sections for probe location
  perf tools: Fix thread lifetime related segfaut in intel_pt
  perf tools: tracepoint_error() can receive e=NULL, robustify it

Pull lockdep fix from Thomas Gleixner:
 "A single fix for the stack trace caching logic in lockdep, where the
  duplicate avoidance managed to store no back trace at all"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix stack trace caching logic

Pull timer fix from Thomas Gleixner:
 "A single fix preventing a 32bit overflow in timespec/val to cputime
  conversions on 32bit machines"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()

Pull irqchip fixes from Thomas Gleixner:
 "Another set of ARM SoC related irqchip fixes:
   - Plug a memory leak in gicv3-its
   - Limit features to the root gic interrupt controller
   - Add a missing barrier in the gic-v3 IAR access
   - Another compile test fix for sun4i"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
  irqchip/gic: Only set the EOImodeNS bit for the root controller
  irqchip/gic: Only populate set_affinity for the root controller
  irqchip/gicv3-its: Fix memory leak in its_free_tables()
  irqchip/sun4i: Fix compilation outside of arch/arm

Pull x86 fixes from Thomas Gleixner:
 "Two small fixlets for x86:

   - Prevent a KASAN false positive in thread_saved_pc()

   - Fix a 32-bit truncation problem in the x86 numa code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/numa: Fix 32-bit memblock range truncation bug on 32-bit NUMA kernels
  x86: Fix KASAN false positives in thread_saved_pc()

Pull MIPS fixes from Ralf Baechle:
 "Here's the first round of MIPS fixes after the merge window:

   - Detect Octeon III's PCI correctly.
   - Fix return value of the MT7620 probing function.
   - Wire up the copy_file_range syscall.
   - Fix 64k page support on 32 bit kernels.
   - Fix the early Coherency Manager probe.
   - Allow only hardware-supported page sizes to be selected for R6000.
   - Fix corner cases for the RDHWR nstruction emulation on old hardware.
   - Fix FPU handling corner cases.
   - Remove stale entry for BCM33xx from the MAINTAINERS file.
   - 32 and 64 bit ELF headers are different, handle them correctly"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  mips: Differentiate between 32 and 64 bit ELF header
  MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon III
  MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe()
  MIPS: Fix early CM probing
  MIPS: Wire up copy_file_range syscall.
  MIPS: Fix 64k page support for 32 bit kernels.
  MIPS: R6000: Don't allow 64k pages for R6000.
  MIPS: traps.c: Correct microMIPS RDHWR emulation
  MIPS: traps.c: Don't emulate RDHWR in the CpU #0 exception handler
  MAINTAINERS: Remove stale entry for BCM33xx chips
  MIPS: Fix FPU disable with preemption
  MIPS: Properly disable FPU in start_thread()
  MIPS: Fix buffer overflow in syscall_get_arguments()

Pull ARM fixes from Russell King:
 "A couple of ARM fixes from Linus for the ICST clock generator code"

[ "Linus" here is Linus Walleij.  Name-stealer.

       Linus "there can be only one" Torvalds ]

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8519/1: ICST: try other dividends than 1
  ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()

Pull component helper fixes from Russell King:
 "A few fixes for problems people have encountered with the recent
  update to the component helpers"

* 'component' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  component: remove device from master match list on failed add
  component: Detach components when deleting master struct
  component: fix crash on x86_64 with hda audio drivers

Pull more rdma fixes from Doug Ledford:
 "I think we are getting pretty close to done now.  There are four
  one-off fixes in this update:

   - fix ipoib multicast joins
   - fix mlx4 error handling
   - fix mlx5 size computation
   - fix a thinko in core code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/mlx5: Fix RC transport send queue overhead computation
  IB/ipoib: fix for rare multicast join race condition
  IB/core: Fix reading capability mask of the port info class
  net/mlx4: fix some error handling in mlx4_multi_func_init()

Pull SCSI target fixes from Nicholas Bellinger:
 "This includes the long awaited series to address a set of bugs around
  active I/O remote-port LUN_RESET, as well as properly handling this
  same case with concurrent fabric driver session disconnect ->
  reconnect.

  Note this set of LUN_RESET bug-fixes has been surviving extended
  testing on both v4.5-rc1 and v3.14.y code over the last weeks, and is
  CC'ed for stable as it's something folks using multiple ESX connected
  hosts with slow backends can certainly trigger.

  The highlights also include:

   - Fix WRITE_SAME/DISCARD emulation 4k sector conversion in
     target/iblock (Mike Christie)

   - Fix TMR abort interaction and AIO type TMR response in qla2xxx
     target (Quinn Tran + Swapnil Nagle)

   - Fix >= v3.17 stale descriptor pointer regression in qla2xxx target
     (Quinn Tran)

   - Fix >= v4.5-rc1 return regression with unmap_zeros_data_store new
     configfs store handler (nab)

   - Add CPU affinity flag + convert qla2xxx to use bit (Quinn + HCH +
     Bart)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  qla2xxx: use TARGET_SCF_USE_CPUID flag to indiate CPU Affinity
  target/transport: add flag to indicate CPU Affinity is observed
  target: Fix incorrect unmap_zeroes_data_store return
  qla2xxx: Use ATIO type to send correct tmr response
  qla2xxx: Fix stale pointer access.
  target/user: Fix cast from pointer to phys_addr_t
  target: Drop legacy se_cmd->task_stop_comp + REQUEST_STOP usage
  target: Fix race with SCF_SEND_DELAYED_TAS handling
  target: Fix remote-port TMR ABORT + se_cmd fabric stop
  target: Fix TAS handling for multi-session se_node_acls
  target: Fix LUN_RESET active TMR descriptor handling
  target: Fix LUN_RESET active I/O handling for ACK_KREF
  qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM
  qla2xxx: Fix warning reported by static checker
  target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors

Pull thermal management fixes from Eduardo Valentin:
 "Specifics in this pull request:

   - Compilation fixes on SPEAR, and U8500 thermal drivers.
   - RCAR thermal driver now recognizes OF-thermal based thermal zones.
   - Small code rework on OF-thermal.
   - These change have been CI tested using KernelCI bot [1,2].  \o/

  I am taking over on Rui's behalf while he is out.  Happy New Chinese
  Year!

  [1] - https://kernelci.org/build/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/
  [2] - https://kernelci.org/boot/all/job/evalenti/kernel/v4.5-rc3-16-ga53b8394ec3c/"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: cpu_cooling: fix out of bounds access in time_in_idle
  thermal: allow u8500-thermal driver to be a module
  thermal: allow spear-thermal driver to be a module
  thermal: spear: use __maybe_unused for PM functions
  thermal: rcar: enable to use thermal-zone on DT
  thermal: of: use for_each_available_child_of_node for child iterator

Pull another sound fix from Takashi Iwai:
 "This contains a fix for the double-free of usb-audio MIDI device at
  probe failure"

* tag 'sound-fix-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: avoid freeing umidi object twice

Pull ARC fixes from Vineet Gupta:
 "I've been sitting on some of these fixes for a while.

   - Corner case of returning to delay slot from interrupt
   - Changing default interrupt prioiry level
   - Kconfig'ize support for super pages
   - Other minor fixes"

* tag 'arc-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: mm: Introduce explicit super page size support
  ARCv2: intc: Allow interruption by lowest priority interrupt
  ARCv2: Check for LL-SC livelock only if LLSC is enabled
  ARC: shrink cpuinfo by not saving full timer BCR
  ARCv2: clocksource: Rename GRTC -> GFRC ...
  ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2

The 'umidi' object will be free'd on the error path by snd_usbmidi_free()
when tearing down the rawmidi interface. So we shouldn't try to free it
in snd_usbmidi_create() after having registered the rawmidi interface.

Found by KASAN.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull PCI fixes from Bjorn Helgaas:
 "These are some Renesas binding updates for PCI host controllers, a
  Broadcom fix for a regression we added in v4.5-rc1, and a fix for an
  AER use-after-free problem that can cause memory corruption.

  Summary:

  AER:
    Flush workqueue on device remove to avoid use-after-free (Sebastian Andrzej Siewior)

  Broadcom iProc host bridge driver:
    Allow multiple devices except on PAXC (Ray Jui)

  Renesas R-Car host bridge driver:
    Add gen2 device tree support for r8a7793 (Simon Horman)
    Add device tree support for r8a7793 (Simon Horman)"

* tag 'pci-v4.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rcar: Add device tree support for r8a7793
  PCI: rcar: Add gen2 device tree support for r8a7793
  PCI: iproc: Allow multiple devices except on PAXC
  PCI/AER: Flush workqueue on device remove to avoid use-after-free

Merge fixes from Andrew Morton:
 "10 fixes"

The lockdep hlist conversion is in the locking tree too, waiting for the
next merge window.  Andrew thought it should go in now.  I'll take it,
since it fixes a real problem and looks trivially correct (famous last
words).

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  arch/x86/Kconfig: CONFIG_X86_UV should depend on CONFIG_EFI
  mm: fix pfn_t vs highmem
  kernel/locking/lockdep.c: convert hash tables to hlists
  mm,thp: fix spellos in describing __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
  mm,thp: khugepaged: call pte flush at the time of collapse
  mm/backing-dev.c: fix error path in wb_init()
  mm, dax: check for pmd_none() after split_huge_pmd()
  vsprintf: kptr_restrict is okay in IRQ when 2
  mm: fix filemap.c kernel doc warning
  ubsan: cosmetic fix to Kconfig text

Fix the RC QPs send queue overhead computation to take into account
two additional segments in the WQE which are needed for registration
operations.

The ATOMIC and UMR segments can't coexist together, so chose maximum out
of them.

The commit 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead
computation") was intended to update RC transport as commit messages
states, but added the code to UC transport.

Fixes: 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

A narrow window for race condition still exist between
multicast join thread and *dev_flush workers.
A kernel crash caused by prolong erratic link state changes
was observed (most likely a faulty cabling):

[167275.656270] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib]
[167275.674443] PGD 0
[167275.677373] Oops: 0000 [#1] SMP
...
[167275.977530] Call Trace:
[167275.982225]  [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib]
[167275.992024]  [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490
[ib_ipoib]
[167276.002149]  [<ffffffff8109d5fb>] process_one_work+0x17b/0x470
[167276.010754]  [<ffffffff8109e3cb>] worker_thread+0x11b/0x400
[167276.019088]  [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400
[167276.027737]  [<ffffffff810a5aef>] kthread+0xcf/0xe0
Here was a hit spot:
ipoib_mcast_join() {
..............
      rec.qkey      = priv->broadcast->mcmember.qkey;
                                       ^^^^^^^
.....
 }
Proposed patch should prevent multicast join task to continue
if link state change is detected.
Signed-off-by: Alex Estrin <alex.estrin@intel.com>

Changes from v4:
- as suggested by Doug Ledford, optimized spinlock usage,
i.e. ipoib_mcast_join() is called with lock held.
Changes from v3:
- sync with priv->lock before flag check.
Chages from v2:
- Move check for OPER_UP flag state to mcast_join() to
ensure no event worker is in progress.
- minor style fixes.
Changes from v1:
- No need to lock again if error detected.
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.5 rc4.

  MMC core:
   - Fix an sysfs ABI regression
   - Return an error in a specific error path dealing with mmc ioctls

  MMC host:
   - sdhci-pci|acpi: Fix card detect race for Intel BXT/APL
   - sh_mmcif: Correct TX DMA channel allocation
   - mmc_spi: Fix error handling for dma mapping errors
   - sdhci-of-at91: Fix an unbalance issue for the runtime PM usage count
   - pxamci: Fix the device-tree probe deferral path
   - pxamci: Fix read-only GPIO polarity"

* tag 'mmc-v4.5-rc2' of git://git.linaro.org/people/ulf.hansson/mmc:
  Revert "mmc: block: don't use parameter prefix if built as module"
  mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
  mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
  mmc: sdhci: Allow override of get_cd() called from sdhci_request()
  mmc: sdhci: Allow override of mmc host operations
  mmc: sh_mmcif: Correct TX DMA channel allocation
  mmc: block: return error on failed mmc_blk_get()
  mmc: pxamci: fix the device-tree probe deferral path
  mmc: mmc_spi: add checks for dma mapping error
  mmc: sdhci-of-at91: fix pm runtime unbalanced issue in error path
  mmc: pxamci: fix again read-only gpio detection polarity