- 17 Jan, 2018 40 commits
-
-
Alexei Starovoitov authored
commit b2157399 upstream. Under speculation, CPUs may mis-predict branches in bounds checks. Thus, memory accesses under a bounds check may be speculated even if the bounds check fails, providing a primitive for building a side channel. To avoid leaking kernel data round up array-based maps and mask the index after bounds check, so speculated load with out of bounds index will load either valid value from the array or zero from the padded area. Unconditionally mask index for all array types even when max_entries are not rounded to power of 2 for root user. When map is created by unpriv user generate a sequence of bpf insns that includes AND operation to make sure that JITed code includes the same 'index & index_mask' operation. If prog_array map is created by unpriv user replace bpf_tail_call(ctx, map, index); with if (index >= max_entries) { index &= map->index_mask; bpf_tail_call(ctx, map, index); } (along with roundup to power 2) to prevent out-of-bounds speculation. There is secondary redundant 'if (index >= max_entries)' in the interpreter and in all JITs, but they can be optimized later if necessary. Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array) cannot be used by unpriv, so no changes there. That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on all architectures with and without JIT. v2->v3: Daniel noticed that attack potentially can be crafted via syscall commands without loading the program, so add masking to those paths as well. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexei Starovoitov authored
commit 8041902d upstream. convert_ctx_accesses() replaces single bpf instruction with a set of instructions. Adjust corresponding insn_aux_data while patching. It's needed to make sure subsequent 'for(all insn)' loops have matching insn and insn_aux_data. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexei Starovoitov authored
commit 79741b3b upstream. reduce indent and make it iterate over instructions similar to convert_ctx_accesses(). Also convert hard BUG_ON into soft verifier error. Signed-off-by:
-
Alexei Starovoitov authored
commit e245c5c6 upstream. no functional change. move fixup_bpf_calls() to verifier.c it's being refactored in the next patch Signed-off-by:
-
Jakub Kicinski authored
commit 3df126f3 upstream. Storing state in reserved fields of instructions makes it impossible to run verifier on programs already marked as read-only. Allocate and use an array of per-instruction state instead. While touching the error path rename and move existing jump target. Suggested-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
-
Daniel Borkmann authored
commit c237ee5e upstream. Move the functionality to patch instructions out of the verifier code and into the core as the new bpf_patch_insn_single() helper will be needed later on for blinding as well. No changes in functionality. Signed-off-by:
-
Lepton Wu authored
This finally resolve crash if loaded under qemu + haxm. Haitao Shan pointed out that the reason of that crash is that NX bit get set for page tables. It seems we missed checking if _PAGE_NX is supported in kaiser_add_user_map Link: https://www.spinics.net/lists/kernel/msg2689835.htmlReviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Lepton Wu <ytht.net@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 0d9cac0c upstream. The vmw_view_cmd_to_type() function returns vmw_view_max (3) on error. It's one element beyond the end of the vmw_view_cotables[] table. My read on this is that it's possible to hit this failure. header->id comes from vmw_cmd_check() and it's a user controlled number between 1040 and 1225 so we can hit that error. But I don't have the hardware to test this code. Fixes: d80efd5c ("drm/vmwgfx: Initial DX support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Andrew Honig authored
commit 75f139aa upstream. This adds a memory barrier when performing a lookup into the vmcs_field_to_offset_table. This is related to CVE-2017-5753. Signed-off-by:
Andrew Honig <ahonig@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jia Zhang authored
commit b94b7373 upstream. Instead of blacklisting all model 79 CPUs when attempting a late microcode loading, limit that only to CPUs with microcode revisions < 0x0b000021 because only on those late loading may cause a system hang. For such processors either: a) a BIOS update which might contain a newer microcode revision or b) the early microcode loading method should be considered. Processors with revisions 0x0b000021 or higher will not experience such hangs. For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. [ bp: Heavily massage commit message and pr_* statements. ] Fixes: 723f2828 ("x86/microcode/intel: Disable late loading on model 79") Signed-off-by:
Jia Zhang <qianyue.zj@alibaba-inc.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/1514772287-92959-1-git-send-email-qianyue.zj@alibaba-inc.comSigned-off-by:
-
Ilya Dryomov authored
commit 21acdf45 upstream. Commit d3834fef ("rbd: bump queue_max_segments") bumped max_segments (unsigned short) to max_hw_sectors (unsigned int). max_hw_sectors is set to the number of 512-byte sectors in an object and overflows unsigned short for 32M (largest possible) objects, making the block layer resort to handing us single segment (i.e. single page or even smaller) bios in that case. Fixes: d3834fef ("rbd: bump queue_max_segments") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Eric Biggers authored
commit 9a006742 upstream. syzkaller triggered a NULL pointer dereference in crypto_remove_spawns() via a program that repeatedly and concurrently requests AEADs "authenc(cmac(des3_ede-asm),pcbc-aes-aesni)" and hashes "cmac(des3_ede)" through AF_ALG, where the hashes are requested as "untested" (CRYPTO_ALG_TESTED is set in ->salg_mask but clear in ->salg_feat; this causes the template to be instantiated for every request). Although AF_ALG users really shouldn't be able to request an "untested" algorithm, the NULL pointer dereference is actually caused by a longstanding race condition where crypto_remove_spawns() can encounter an instance which has had spawn(s) "grabbed" but hasn't yet been registered, resulting in ->cra_users still being NULL. We probably should properly initialize ->cra_users earlier, but that would require updating many templates individually. For now just fix the bug in a simple way that can easily be backported: make crypto_remove_spawns() treat a NULL ->cra_users list as empty. Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 862c03ee ] ip6_setup_cork() might return an error, while memory allocations have been done and must be rolled back. Fixes: 6422398c ("ipv6: introduce ipv6_make_skb") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Reported-by:
Mike Maloney <maloney@google.com> Acked-by:
-
Jerome Brunet authored
[ Upstream commit 879626e3 ] Note in the databook - Section 4.4 - EEE : " The EEE feature is not supported when the MAC is configured to use the TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC supports multiple PHY interfaces, you should activate the EEE mode only when the MAC is operating with GMII, MII, or RGMII interface." Applying this restriction solves a stability issue observed on Amlogic gxl platforms operating with RMII interface and the internal PHY. Fixes: 83bf79b6 ("stmmac: disable at run-time the EEE if not supported") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Tested-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 51335502 ] Renesas SH7757 has 2 Fast and 2 Gigabit Ether controllers, while the 'sh_eth' driver can only reset and initialize TSU of the first controller pair. Shimoda-san tried to solve that adding the 'needs_init' member to the 'struct sh_eth_plat_data', however the platform code still never sets this flag. I think that we can infer this information from the 'devno' variable (set to 'platform_device::id') and reset/init the Ether controller pair only for an even 'devno'; therefore 'sh_eth_plat_data::needs_init' can be removed... Fixes: 150647fb ("net: sh_eth: change the condition of initialization") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit dfe8266b ] When switching the driver to the managed device API, I managed to break the case of a dual Ether devices sharing a single TSU: the 2nd Ether port wouldn't probe. Iwamatsu-san has tried to fix this but his patch was buggy and he then dropped the ball... The solution is to limit calling devm_request_mem_region() to the first of the two ports sharing the same TSU, so devm_ioremap_resource() can't be used anymore for the TSU resource... Fixes: d5e07e69 ("sh_eth: use managed device API") Reported-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by:
-
Mohamed Ghannam authored
[ Upstream commit 7d11f77f ] set rm->atomic.op_active to 0 when rds_pin_pages() fails or the user supplied address is invalid, this prevents a NULL pointer usage in rds_atomic_free_op() Signed-off-by:
Mohamed Ghannam <simo.ghannam@gmail.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Mohamed Ghannam authored
[ Upstream commit c0955087 ] When args->nr_local is 0, nr_pages gets also 0 due some size calculation via rds_rm_size(), which is later used to allocate pages for DMA, this bug produces a heap Out-Of-Bound write access to a specific memory region. Signed-off-by:
-
Andrii Vladyka authored
[ Upstream commit b8fd0823 ] Use AF_INET6 instead of AF_INET in IPv6-related code path Signed-off-by:
Andrii Vladyka <tulup@mail.ru> Signed-off-by:
-
Eli Cooper authored
[ Upstream commit 23263ec8 ] When an ip6_tunnel is in mode 'any', where the transport layer protocol can be either 4 or 41, dst_cache must be disabled. This is because xfrm policies might apply to only one of the two protocols. Caching dst would cause xfrm policies for one protocol incorrectly used for the other. Signed-off-by:
Eli Cooper <elicooper@gmx.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 78bbb15f ] A vlan device with vid 0 is allow to creat by not able to be fully cleaned up by unregister_vlan_dev() which checks for vlan_id!=0. Also, VLAN 0 is probably not a valid number and it is kinda "reserved" for HW accelerating devices, but it is probably too late to reject it from creation even if makes sense. Instead, just remove the check in unregister_vlan_dev(). Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: ad1afb00 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Pavel Tatashin authored
In entry_64.S we have code like this: /* Unconditionally use kernel CR3 for do_nmi() */ /* %rax is saved above, so OK to clobber here */ ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER /* If PCID enabled, NOFLUSH now and NOFLUSH on return */ ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID pushq %rax /* mask off "user" bit of pgd address and 12 PCID bits: */ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax movq %rax, %cr3 2: /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ call do_nmi With this instruction: andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax We unconditionally switch from whatever our CR3 was to kernel page table. But, in arch/x86/platform/efi/efi_64.c We temporarily set a different page table, that does not have the kernel page table with 0x1000 offset from it. Look in efi_thunk() and efi_thunk_set_virtual_address_map(). So, while CR3 points to the other page table, we get an NMI interrupt, and clear 0x1000 from CR3, resulting in a bogus CR3 if the 0x1000 bit was set. The efi page table comes from realmode/rm/trampoline_64.S: arch/x86/realmode/rm/trampoline_64.S 141 .bss 142 .balign PAGE_SIZE 143 GLOBAL(trampoline_pgd) .space PAGE_SIZE Notice: alignment is PAGE_SIZE, so after applying KAISER_SHADOW_PGD_OFFSET which equal to PAGE_SIZE, we can get a different page table. But, even if we fix alignment, here the trampoline binary is later copied into dynamically allocated memory in reserve_real_mode(), so we need to fix that place as well. Fixes: 8a43ddfb ("KAISER: Kernel Address Isolation") Signed-off-by:Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by:
Steven Sistare <steven.sistare@oracle.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit b5213e1e which was commit 46aa6a30 upstream. This is being reverted because the affected commit this was trying to fix, a8ba798b ("selftests: enable O and KBUILD_OUTPUT"), was never backported to the 4.4-stable tree. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Ben Hutchings authored
This is a stable-only fix for the backport of commit 5d9b70f7 ("xhci: Don't add a virt_dev to the devs array before it's fully allocated"). In branches that predate commit c5628a2a ("xhci: remove endpoint ring cache") there is an additional failure path in xhci_alloc_virt_device() where ring cache allocation fails, in which case we need to free the ring allocated for endpoint 0. Signed-off-by:
-
Ani Sinha authored
commit 984cf355 upstream. Commit 984d74a7 ("sysrq: rcu-ify __handle_sysrq") replaced spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since rcu_read_lock() does not disable preemption, faulthandler_disabled() in __do_page_fault() in x86/fault.c returns false. When the code later calls might_sleep() in the pagefault handler, we get the following warning: BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187 in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash Preemption disabled at:[<ffffffff81484339>] printk+0x48/0x4a To fix this, we release the RCU read lock before we crash. Tested this patch on linux 3.18 by booting off one of our boards. Fixes: 984d74a7 ("sysrq: rcu-ify __handle_sysrq") Signed-off-by:
Ani Sinha <ani@arista.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Jiri Slaby authored
commit 1ab87298 upstream. hwrng kthread can be waiting via hwrng_fillfn for some data from a rng like virtio-rng: hwrng D ffff880093e17798 0 382 2 0x00000000 ... Call Trace: [<ffffffff817339c6>] wait_for_completion_killable+0x96/0x210 [<ffffffffa00aa1b7>] virtio_read+0x57/0xf0 [virtio_rng] [<ffffffff814f4a35>] hwrng_fillfn+0x75/0x130 [<ffffffff810aa243>] kthread+0xf3/0x110 And when some user program tries to read the /dev node in this state, we get: rngd D ffff880093e17798 0 762 1 0x00000004 ... Call Trace: [<ffffffff817351ac>] mutex_lock_nested+0x15c/0x3e0 [<ffffffff814f478e>] rng_dev_read+0x6e/0x240 [<ffffffff81231958>] __vfs_read+0x28/0xe0 [<ffffffff81232393>] vfs_read+0x83/0x130 And this is indeed unkillable. So use mutex_lock_interruptible instead of mutex_lock in rng_dev_read and exit immediatelly when interrupted. And possibly return already read data, if any (as POSIX allows). v2: use ERESTARTSYS instead of EINTR Signed-off-by:
-
Jiri Kosina authored
commit 39380b80 upstream. Currently it's possible for broken (or malicious) userspace to flood a kernel log indefinitely with messages a-la Program dmidecode tried to access /dev/mem between f0000->100000 because range_is_allowed() is case of CONFIG_STRICT_DEVMEM being turned on dumps this information each and every time devmem_is_allowed() fails. Reportedly userspace that is able to trigger contignuous flow of these messages exists. It would be possible to rate limit this message, but that'd have a questionable value; the administrator wouldn't get information about all the failing accessess, so then the information would be both superfluous and incomplete at the same time :) Returning EPERM (which is what is actually happening) is enough indication for userspace what has happened; no need to log this particular error as some sort of special condition. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1607081137020.24757@cbobk.fhfr.pmSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric Dumazet authored
commit a9e840a2 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: cc28a20e ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Eric Dumazet authored
commit b7c6d267 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: d0cad871 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by:
-
Eric Dumazet authored
commit d532c108 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: c9b37458 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by:
-
Eric Dumazet authored
commit d4ca7359 upstream. We need to ensure there is enough headroom to push extra header, but we also need to check if we are allowed to change headers. skb_cow_head() is the proper helper to deal with this. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
-
hayeswang authored
commit cda9fb01 upstream. Replace disable_aldps() and enable_aldps() with aldps_en(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
commit 216a8349 upstream. Replace test_bit() followed by clear_bit() with test_and_clear_bit(). Signed-off-by:
-
hayeswang authored
commit 5ee3c60c upstream. When the autosuspend is enabled and occurs before system suspend, we should wake the device before running system syspend. Then, we could change the wake event for system suspend. Otherwise, the device would resume the system when receiving any packet. Signed-off-by:
-
Ulf Hansson authored
commit 79c5623f upstream. The commit 7d32cdef ("usb: musb: fail with error when no DMA controller set"), caused the core platform driver to correctly return an error code when fail probing. Unfurtante it also caused bug for a NULL pointer dereference, during system suspend for the ux500 driver. The reason is a lacking validation of the corresponding ->driver_data pointer, which won't be set when the musb core driver fails to probe (or haven't yet been probed). Fixes: 7d32cdef ("usb: musb: fail with error when no DMA...") Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 588afcc1 upstream. This fixes the crash reported in: http://seclists.org/bugtraq/2015/Oct/35 The interface number needs a sanity check. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Davidlohr Bueso authored
commit 1329ce6f upstream. Make use of wake-queues and enable the wakeup to occur after releasing the wait_lock. This is similar to what we do with rtmutex top waiter, slightly shortening the critical region and allow other waiters to acquire the wait_lock sooner. In low contention cases it can also help the recently woken waiter to find the wait_lock available (fastpath) when it continues execution. Reviewed-by:
Waiman Long <Waiman.Long@hpe.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: Jason Low <jason.low2@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Waiman Long <waiman.long@hpe.com> Cc: Will Deacon <Will.Deacon@arm.com> Link: http://lkml.kernel.org/r/20160125022343.GA3322@linux-uzut.siteSigned-off-by:
-
Jianyu Zhan authored
commit 29b75eb2 upstream. Commit e91467ec ("bug in futex unqueue_me") introduced a barrier() in unqueue_me() to prevent the compiler from rereading the lock pointer which might change after a check for NULL. Replace the barrier() with a READ_ONCE() for the following reasons: 1) READ_ONCE() is a weaker form of barrier() that affects only the specific load operation, while barrier() is a general compiler level memory barrier. READ_ONCE() was not available at the time when the barrier was added. 2) Aside of that READ_ONCE() is descriptive and self explainatory while a barrier without comment is not clear to the casual reader. No functional change. [ tglx: Massaged changelog ] Signed-off-by:
Jianyu Zhan <nasa4836@gmail.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Darren Hart <dvhart@linux.intel.com> Cc: dave@stgolabs.net Cc: peterz@infradead.org Cc: linux@rasmusvillemoes.dk Cc: akpm@linux-foundation.org Cc: fengguang.wu@intel.com Cc: bigeasy@linutronix.de Link: http://lkml.kernel.org/r/1457314344-5685-1-git-send-email-nasa4836@gmail.comSigned-off-by:
-
Jeff Layton authored
commit 0752ba80 upstream. We don't clean out OFD locks on close(), so there's no need to check for a race with them here. They'll get cleaned out at the same time that flock locks are. Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
Mel Gorman <mgorman@suse.de>
-
Dan Streetman authored
commit fd5bb66c upstream. Change the zpool/compressor param callback function to release the zswap_pools_lock spinlock before calling param_set_charp, since that function may sleep when it calls kmalloc with GFP_KERNEL. While this problem has existed for a while, I wasn't able to trigger it using a tight loop changing either/both the zpool and compressor params; I think it's very unlikely to be an issue on the stable kernels, especially since most zswap users will change the compressor and/or zpool from sysfs only one time each boot - or zero times, if they add the params to the kernel boot. Fixes: c99b42c3 ("zswap: use charp for zswap param strings") Link: http://lkml.kernel.org/r/20170126155821.4545-1-ddstreet@ieee.orgSigned-off-by:
Dan Streetman <dan.streetman@canonical.com> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
