Prepare input updates for 6.4 merge window.

This reverts commit db7220c4 because it
causes crashes when trying to dereference xpad->dev->dev in xpad_probe()
which has not been set up yet.

Reported-by: syzbot+a3f758b8d8cb7e49afec@syzkaller.appspotmail.com
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://groups.google.com/g/syzkaller-bugs/c/iMhTgpGuIbMSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the binding doc to dt schema, and also fixed the
example from fixed-regulator to regulator-fixed.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230407075259.1593739-1-peng.fan@oss.nxp.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This commit explicitly disables the audio interface the same way the official
driver does. This is needed for some controllers, such as the PowerA Enhanced
Wired Controller for Series X|S (0x20d6:0x200e) to report the guide button.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230411031650.960322-3-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Wired GIP devices present multiple interfaces with the same USB identification
other than the interface number. This adds constants for differentiating two of
them and uses them where appropriate
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230411031650.960322-2-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prior to this patch, the sensing configuration data was not parsed
correctly, breaking detection of max_tch. The vendor driver includes
this field. This change informs the driver about the correct maximum
number of simultaneous touch inputs.

Tested on a Pine64 PineNote with a modified touch screen controller
firmware.
Signed-off-by: hrdl <git@hrdl.eu>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20230411211651.3791304-1-git@hrdl.euSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

No functional modification involved.

drivers/input/rmi4/rmi_bus.c:300: warning: expecting prototype for rmi_register_function_handler(). Prototype was for __rmi_register_function_handler() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230209040710.111456-1-jiapeng.chong@linux.alibaba.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

rpi_firmware_get() take reference, we need to release it in error paths
as well. Use devm_rpi_firmware_get() helper to handling the resources.
Also remove the existing rpi_firmware_put().

Fixes: 0b9f28fe ("Input: add official Raspberry Pi's touchscreen driver")
Fixes: 3b8ddff7 ("input: raspberrypi-ts: Release firmware handle when not needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

After starting to use regmap API to access registers the edt-ft5x06
driver depends on symbols provided by REGMAP_I2C:

edt-ft5x06.o: in function `edt_ft5x06_ts_probe':
edt-ft5x06.c:1154: undefined reference to `__regmap_init_i2c'
edt-ft5x06.o: in function `edt_ft5x06_ts_identify':
edt-ft5x06.c:897: undefined reference to `__regmap_init_i2c'

Make sure support for I2C regmap is actually selected by adding this
dependency to Kconfig.

Fixes: 9dfd9708 ("Input: edt-ft5x06 - convert to use regmap API")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZDRBExF1xmxalMZc@makrotopia.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver had the code to differentiate between finger and palm touches,
but did not use this information when reporting contacts. Change it so that
proper "tool" type is assigned to reported contacts.
Signed-off-by: JungHoon Hyun <hyunjunghoon@melfas.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fix WARNING in pegasus_open/usb_submit_urb
Syzbot bug: https://syzkaller.appspot.com/bug?id=bbc107584dcf3262253ce93183e51f3612aaeb13

Warning raised because pegasus_driver submits transfer request for
bogus URB (pipe type does not match endpoint type). Add sanity check at
probe time for pipe value extracted from endpoint descriptor. Probe
will fail if sanity check fails.

Reported-and-tested-by: syzbot+04ee0cb4caccaed12d78@syzkaller.appspotmail.com
Signed-off-by: Soumya Negi <soumya.negi97@gmail.com>
Link: https://lore.kernel.org/r/20230404074145.11523-1-soumya.negi97@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Function input_set_abs_params() has already set EV_ABS bit for us.

drivers/input/misc/cma3000_d0x.c:328 cma3000_init() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230407021343.63512-1-jiapeng.chong@linux.alibaba.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It is pointless and expensive to calculate data in the interrupt that
depends on the type of touchscreen, which is detected on the driver
probe and cannot then be changed.
So calculate the size of the data buffer on the driver probe, as well as
the data retrieval command, and then use them in the ISR.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-10-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

With this patch, the CRC is always verified by the same function, even in
the case of accessing registers where the number of bytes is minimal.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-9-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It replaces custom read/write functions with regmap API, making the
driver code more generic.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-8-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In some parts of the code, error messages were improperly printed with
dev_dbg() calls. In those cases, dev_dbg() has been replaced with
dev_err().
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-7-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The use of the macros M06_REG_ADDR and M06_REG_CMD avoids code
duplication without impacting the application load, and reduces the
chances of errors or mistakes.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-6-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is no need to recalculate the CRC when the data has not changed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-5-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It adds spaces around '-' as recommended by the Linux coding style.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-4-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It removes unnecessary blank lines so that checkpatch doesn't complain
anymore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-3-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Matches the alignment to the open parenthesis as suggested by
checkpatch.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-2-dario.binacchi@amarulasolutions.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When a hard IRQ is triggered, the soft IRQ, which decides if an actual
pen down happened, should always be triggered. This enables the usage of
"can_sleep" GPIO chips as "pen down" GPIO, as the value is not read
during the hard IRQ anymore. This might be the case if the GPIO chip is
an expander behind i2c.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The input subsystem doesn't currently have any unit tests, let's add a
CONFIG_INPUT_KUNIT_TEST option that builds a test suite to be executed
with the KUnit test infrastructure.

For now, only three tests were added for some of the input core helper
functions that are trivial to test:

  * input_test_polling: set/get poll interval and set-up a poll handler.

  * input_test_timestamp: set/get input event timestamps.

  * input_test_match_device_id: match a device by bus, vendor, product,
                                version and events capable of handling.

But having the minimal KUnit support allows to add more tests and suites
as follow-up changes. The tests can be run with the following command:

  $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/input/tests/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Enric Balletbo i Serra <eballetbo@redhat.com>
config: powerpc-allnoconfig (https://download.01.org/0day-ci/archive/20230330/202303301815.kRKFM3NH-lkp@intel.com/config)
Link: https://lore.kernel.org/r/20230330081831.2291351-1-javierm@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a new driver for the Novatek i2c touchscreen controller as found
on the Acer Iconia One 7 B1-750 tablet. Unfortunately the touchscreen
controller model-number is unknown. Even with the tablet opened up it
is impossible to read the model-number.

Android calls this a "NVT-ts" touchscreen, but that may apply to other
Novatek controller models too.

This appears to be the same controller as the one supported by
https://github.com/advx9600/android/blob/master/touchscreen/NVTtouch_Android4.0/NVTtouch.c
but unfortunately that does not give us a model-number either.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20230326212308.55730-1-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and
Gamesir-G3w, require a specific packet that the first-party XInput driver sends
before it will start sending reports. It's not currently known what this packet
does, but since the first-party driver always sends it's unlikely that this
could cause issues with existing controllers.
Co-authored-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230324040446.3487725-3-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

They act that way in PC mode.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230324040446.3487725-2-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # for mediatek,mt6779-keypad.yaml
Link: https://lore.kernel.org/r/20230320234718.2930154-1-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This adds support for the Turtle Beach REACT-R and Recon Xbox controllers
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The list of specific VID/PID combinations for various controllers recently
added a new field "xtype". However, this field isn't used, nor filled in
the table itself, and was likely added by mistake and overlooked during
review.  Since this field isn't used, it's safe to remove.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230225012147.276489-3-vi@endrift.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.

Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU
and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after
boot and sometimes also after resume. However both are required for the
keyboard to not fail completely sometimes after boot or resume.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230321191619.647911-1-wse@tuxedocomputers.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The AlpsPS/2 code previously relied on the assumption that `char` is a
signed type, which was true on x86 platforms (the only place where this
driver is used) before kernel 6.2. However, on 6.2 and later, this
assumption is broken due to the introduction of -funsigned-char as a new
global compiler flag.

Fix this by explicitly specifying the signedness of `char` when sign
extending the values received from the device.

Fixes: f3f33c67 ("Input: alps - Rushmore and v7 resolution support")
Signed-off-by: msizanoen <msizanoen@qtmlabs.xyz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230320045228.182259-1-msizanoen@qtmlabs.xyzSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The recent change of -funsigned-char causes additions of negative
numbers to become additions of large positive numbers, leading to wrong
calculations of mouse movement. Change these casts to be explicitly
signed, to take into account negative offsets.

Fixes: 3bc753c0 ("kbuild: treat char as always unsigned")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211
Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When commit commit fff1011a ("Input: xpad - add X-Box Adaptive Profile
button") was applied, one hunk ended up in the wrong function; move it to
where it belongs.

Fixes: fff1011a ("Input: xpad - add X-Box Adaptive Profile button")
Signed-off-by: Matthias Benkmann <matthias.benkmann@gmail.com>
Link: https://lore.kernel.org/r/20230318162106.0aef4ba5@ninjaSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If a platform driver's remove callback returns non-zero the driver core
emits an error message. In such a case however iqs62x_keys_remove()
already issued a (better) message. So return zero to suppress the
generic message.

This patch has no other side effects as platform_remove() ignores the
return value of .remove() after the warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230318225110.261439-1-u.kleine-koenig@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).  This
also fixes !CONFIG_OF error:
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312131514.351603-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).  This
also fixes !CONFIG_OF error:

  drivers/input/touchscreen/sun4i-ts.c:392:34: error: ‘sun4i_ts_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230312131514.351603-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:

  drivers/input/keyboard/tm2-touchkey.c:335:34: error: ‘tm2_touchkey_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312131514.351603-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).  This
also fixes !CONFIG_OF error:

  drivers/input/keyboard/st-keyscan.c:251:34: error: ‘keyscan_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312131514.351603-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144708.1542682-1-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144708.1542751-1-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>