- 07 May, 2019 12 commits
-
-
Ville Syrjälä authored
For us KBP is 100% identical to SPT. Kill the redundant enum value. Also bspec doesn't talk about KBP either, so this might avoid some confusion when cross checking the code against the spec. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506152627.20283-1-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
Do not treat reset as a normal preemption event and avoid giving the guilty request a priority boost for simply being active at the time of reset. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190507122954.6299-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we couple the scheduler more tightly with the execlists policy, we can apply the preemption policy to the question of whether we need to kick the tasklet at all for this priority bump. v2: Rephrase it as a core i915 policy and not an execlists foible. v3: Pull the kick together. Signed-off-by:
-
Chris Wilson authored
If the user is racing a call to debugfs/i915_drop_caches with ongoing submission from another thread/process, we may never end up idling the GPU and be uninterruptibly spinning in debugfs/i915_drop_caches trying to catch an idle moment. Just flush the work once, that should be enough to park the system under correct conditions. Outside of those we either have a driver bug or the user is racing themselves. Sadly, because the user may be provoking the unwanted situation we can't put a warn here to attract attention to a probable bug. Signed-off-by:
-
Chris Wilson authored
Replace the racy continuation check within retire_work with a definite kill-switch on idling. The race was being exposed by gem_concurrent_blit where the retire_worker would be terminated too early leaving us spinning in debugfs/i915_drop_caches with nothing flushing the retirement queue. Although that the igt is trying to idle from one child while submitting from another may be a contributing factor as to why it runs so slowly... v2: Use the non-sync version of cancel_delayed_work(), we only need to stop it from being scheduled as we independently check whether now is the right time to be parking. Testcase: igt/gem_concurrent_blit Fixes: 79ffac85 ("drm/i915: Invert the GEM wakeref hierarchy") Signed-off-by:
-
Chris Wilson authored
The original intent for the delay before running the idle_work was to provide a hysteresis to avoid ping-ponging the device runtime-pm. Since then we have also pulled in some memory management and general device management for parking. But with the inversion of the wakeref handling, GEM is no longer responsible for the wakeref and by the time we call the idle_work, the device is asleep. It seems appropriate now to drop the delay and just run the worker immediately to flush the cached GEM state before sleeping. Signed-off-by:
-
Chris Wilson authored
To complete the idle worker, we must complete 2 passes of wait-for-idle. At the end of the first pass, we queue a switch-to-kernel-context and may only idle after waiting for its completion. Speed up the flush_work by doing the wait explicitly, which then allows us to remove the unbounded loop trying to complete the flush_work in the next patch. References: 79ffac85 ("drm/i915: Invert the GEM wakeref hierarchy") Testcase: igt/gem_ppgtt/flind-and-close-vma-leak Signed-off-by:
-
Clinton Taylor authored
v2: Fix commit msg to reflect why issue occurs(Jani) Set GCP_COLOR_INDICATION only when we set 10/12 bit deep color. Changing settings from 10/12 bit deep color to 8 bit(& vice versa) doesn't work correctly using xrandr max bpc property. When we connect a monitor which supports deep color, the highest deep color setting is selected; which sets GCP_COLOR_INDICATION. When we change the setting to 8 bit color, we still set GCP_COLOR_INDICATION which doesn't allow the switch back to 8 bit color. v3,4: Add comments & drop changes in intel_hdmi_compute_config(Ville) Since HSW+, GCP_COLOR_INDICATION is not required for 8bpc. Drop the changes in intel_hdmi_compute_config as desired_bpp is needed to change values for pipe_bpp based on bw_constrained flag. v5: Fix missing logical && in condition for setting GCP_COLOR_INDICATION. v6: Fix comment formatting (Ville) v7: Add reviewed by Ville v8: Set GCP_COLOR_INDICATION based on spec: For Gen 7.5 or later platforms, indicate color depth only for deep color modes. Bspec: 8135,7751,50524 Pre DDI platforms, indicate color depth if deep color is supported by sink. Bspec: 7854 Exception: CHERRYVIEW behaves like Pre DDI platforms. Bspec: 15975 Check pipe_bpp is less than bpp * 3 in hdmi_deep_color_possible, to not set 12 bit deep color for every modeset. This fixes the issue where 12 bit color was selected even when user selected 10 bit.(Ville) v9: Maintain a consistent behavior for all platforms and support GCP_COLOR_INDICATION only when we are in deep color mode. Remove hdmi_sink_is_deep_color() - no longer needed as checking pipe_bpp > 24 takes care of the deep color mode scenario. Separate patch for fixing switch from 12 bit to 10 bit deep color mode. Co-developed-by:
Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Clinton Taylor <Clinton.A.Taylor@intel.com> Signed-off-by:
-
Chris Wilson authored
Due to the asynchronous tasklet and recursive GT wakeref, it may happen that we submit to the engine (underneath it's own wakeref) prior to the central wakeref being marked as taken. Switch to checking the local wakeref for greater consistency. Fixes: 79ffac85 ("drm/i915: Invert the GEM wakeref hierarchy") Signed-off-by:
-
Chris Wilson authored
The counter goes to zero at the start of the parking cycle, but the wakeref itself is held until the end. Likewise, the counter becomes one at the end of the unparking, but the wakeref is taken first. If we check the wakeref instead of the counter, we include the unpark/unparking time as intel_wakeref_is_active(), and do not spuriously declare inactive if we fail to park (i.e. the parking and wakeref drop is postponed). Signed-off-by:
-
Chris Wilson authored
Inside the signal handler, we expect the requests to be ordered by their breadcrumb such that no later request may be complete if we find an earlier incomplete. Add an assert to check that the next breadcrumb should not be logically before the current. v2: Move the overhanging line into its own function and reuse it after doing the insertion. Signed-off-by:
-
Chris Wilson authored
Acquiring the signaler's timeline takes an active reference to their HWSP that we would like to avoid if possible, so take it after performing all of our allocations required to set up the fencing. The acquisition also provides the final check that the target has not already signaled allowing us to avoid the semaphore at the last moment. Signed-off-by:
-
- 06 May, 2019 5 commits
-
-
Ville Syrjälä authored
hsw_enable_pc8()/hsw_disable_pc8() are more less equivalent to the display core init/unit functions of later platforms. Relocate the hsw/bdw code into intel_runtime_pm.c so that it sits next to its cousins. Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
intel_ddi_pll_init() is an anachronism. Rename it to hsw_assert_cdclk() and move it to the power domain init code. Signed-off-by:
-
Ville Syrjälä authored
Move the w/a to disable IPC on SKL closer to the actual code that implements IPS. Otherwise I just end up confused as to what is excluding SKL from considerations. IMO this makes more sense anyway since the hw does have the feature, we're just not supposed to use it. And this also makes us actually disable IPC in case eg. the BIOS enabled it when it shouldn't have. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190503173807.10834-3-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Drop WaIncreaseLatencyIPCEnabled/Display w/a #1140 for early cnl steppings. v2: Drop the IS_GEN9_BC() change since other related parts of the code also use the KBL||CFL pattern Signed-off-by: -
Ville Syrjälä authored
Display w/a #1141 is also known as WaIncreaseLatencyIPCEnabled. Add that to the comment. Signed-off-by:
-
- 04 May, 2019 1 commit
-
-
Chris Wilson authored
Asking the GPU to busywait on a memory address, perhaps not unexpectedly in hindsight for a shared system, leads to bus contention that affects CPU programs trying to concurrently access memory. This can manifest as a drop in transcode throughput on highly over-saturated workloads. The only clue offered by perf, is that the bus-cycles (perf stat -e bus-cycles) jumped by 50% when enabling semaphores. This corresponds with extra CPU active cycles being attributed to intel_idle's mwait. This patch introduces a heuristic to try and detect when more than one client is submitting to the GPU pushing it into an oversaturated state. As we already keep track of when the semaphores are signaled, we can inspect their state on submitting the busywait batch and if we planned to use a semaphore but were too late, conclude that the GPU is overloaded and not try to use semaphores in future requests. In practice, this means we optimistically try to use semaphores for the first frame of a transcode job split over multiple engines, and fail if there are multiple clients active and continue not to use semaphores for the subsequent frames in the sequence. Periodically, we try to optimistically switch semaphores back on whenever the client waits to catch up with the transcode results. With 1 client, on Broxton J3455, with the relative fps normalized by %cpu: x no semaphores + drm-tip * patched +------------------------------------------------------------------------+ | * | | *+ | | **+ | | **+ x | | x * +**+ x | | x x * * +***x xx | | x x * * *+***x *x | | x x* + * * *****x *x x | | + x xx+x* + *** * ********* x * | | + x xx+x* * *** +** ********* xx * | | * + ++++* + x*x****+*+* ***+*************+x* * | |*+ +** *+ + +* + *++****** *xxx**********x***+*****************+*++ *| | |__________A_____M_____| | | |_______________A____M_________| | | |____________A___M________| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 120 2.60475 3.50941 3.31123 3.2143953 0.21117399 + 120 2.3826 3.57077 3.25101 3.1414161 0.28146407 Difference at 95.0% confidence -0.0729792 +/- 0.0629585 -2.27039% +/- 1.95864% (Student's t, pooled s = 0.248814) * 120 2.35536 3.66713 3.2849 3.2059917 0.24618565 No difference proven at 95.0% confidence With 10 clients over-saturating the pipeline: x no semaphores + drm-tip * patched +------------------------------------------------------------------------+ | ++ ** | | ++ ** | | ++ ** | | ++ ** | | ++ xx *** | | ++ xx *** | | ++ xxx*** | | ++ xxx*** | | +++ xxx*** | | +++ xx**** | | +++ xx**** | | +++ xx**** | | +++ xx**** | | ++++ xx**** | | +++++ xx**** | | +++++ x x****** | | ++++++ xxx******* | | ++++++ xxx******* | | ++++++ xxx******* | | ++++++ xx******** | | ++++++ xxxx******** | | ++++++ xxxx******** | | ++++++++ xxxxx********* | |+ + + + ++++++++ xxx*xx**********x* *| | |__A__| | | |__AM__| | | |__A_| | +------------------------------------------------------------------------+ N Min Max Median Avg Stddev x 120 2.47855 2.8972 2.72376 2.7193402 0.074604933 + 120 1.17367 1.77459 1.71977 1.6966782 0.085850697 Difference at 95.0% confidence -1.02266 +/- 0.0203502 -37.607% +/- 0.748352% (Student's t, pooled s = 0.0804246) * 120 2.57868 3.00821 2.80142 2.7923878 0.058646477 Difference at 95.0% confidence 0.0730476 +/- 0.0169791 2.68622% +/- 0.624383% (Student's t, pooled s = 0.0671018) Indicating that we've recovered the regression from enabling semaphores on this saturated setup, with a hint towards an overall improvement. Very similar, but of smaller magnitude, results are observed on both Skylake(gt2) and Kabylake(gt4). This may be due to the reduced impact of bus-cycles, where we see a 50% hit on Broxton, it is only 10% on the big core, in this particular test. One observation to make here is that for a greedy client trying to maximise its own throughput, using semaphores is the right choice. It is only the holistic system-wide view that semaphores of one client impacts another and reduces the overall throughput where we would choose to disable semaphores. The most noticeable negactive impact this has is on the no-op microbenchmarks, which are also very notable for having no cpu bus load. In particular, this increases the runtime and energy consumption of gem_exec_whisper. Signed-off-by:
-
- 03 May, 2019 22 commits
-
-
Ville Syrjälä authored
We have a lot of '(u64)foo * bar' everywhere. Replace with mul_u32_u32() to avoid gcc failing to use a regular 32x32->64 multiply for this. Signed-off-by:
-
Ville Syrjälä authored
Turns out the cursor is compatible with the pipe "HDR mode". It's only the actual SDR planes that get entirely bypassed during blending. So let's ignore the cursor when checking if we have any planes active that aren't HDR compatible. This fixes the regressions in the kms_cursor_crc and kms_plane_cursor tests. Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110579 Fixes: 09b25812 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used") Signed-off-by:
Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
I fumbled the PIPEMISC write into the wrong place. It only gets called for fastsets, but since value needs to be updated based on the set of active planes it needs to be done for all plane updates. Move it to the correct spot. The symptoms include SDR planes never showing up if a previous modeset/fastset left the pipe in HDR mode. This was immediately obvious when running the kms_plane pixel format tests. Unfortunately the test didn't realize it was scanning out pure black all the time and declared success anyway. Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Fixes: 09b25812 ("drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used") Signed-off-by:
-
Chris Wilson authored
Currently we submit the semaphore busywait as soon as the signaler is submitted to HW. However, we may submit the signaler as the tail of a batch of requests, and even not as the first context in the HW list, i.e. the busywait may start spinning far in advance of the signaler even starting. If we wait until the request before the signaler is completed before submitting the busywait, we prevent the busywait from starting too early, if the signaler is not first in submission port. To handle the case where the signaler is at the start of the second (or later) submission port, we will need to delay the execution callback until we know the context is promoted to port0. A challenge for later. Fixes: e8861964 ("drm/i915: Use HW semaphores for inter-engine synchroni sation on gen8+") Signed-off-by:
-
Chris Wilson authored
Given sufficient preemption, we may see a busy system that doesn't advance seqno while performing work across multiple contexts, and given sufficient pathology not even notice a change in ACTHD. What does change between the preempting contexts is their RING, so take note of that and treat a change in the ring address as being an indication of forward progress. Signed-off-by:
-
Chris Wilson authored
Drop the check in GEM parking that the engines were already parked. The intention here was that before we dropped the GT wakeref, we were sure that no more interrupts could be raised -- however, we have already dropped the wakeref by this point and the warning is no longer valid. Signed-off-by:
-
Chris Wilson authored
Tidy up the cleanup sequence by always ensure that the tasklet is flushed on parking (before we cleanup). The parking provides a convenient point to ensure that the backend is truly idle. v2: Do the full check for idleness before parking, to be sure we flush any residual interrupt. Signed-off-by:
-
Chris Wilson authored
We are not allowed to rpm_get() inside the runtime-suspend callback, so split the intel_uc_suspend() into the core that assumes the caller holds the wakeref (intel_uc_runtime_suspend), and one that acquires the wakeref as necessary (intel_uc_suspend). Reported-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Fixes: 79ffac85 ("drm/i915: Invert the GEM wakeref hierarchy") Signed-off-by:
-
Jani Nikula authored
It used to be handy that we only had a couple of headers, but over time i915_drv.h has become unwieldy. Extract declarations to a separate header file corresponding to the implementation module, clarifying the modularity of the driver. Ensure the new header is self-contained, and do so with minimal further includes, using forward declarations as needed. Include the new header only where needed, and sort the modified include directives while at it and as needed. While at it, rename intel_i2c.c to intel_gmbus.c and the functions to intel_gmbus_*. No functional changes. Reviewed-by:
-
Jani Nikula authored
Reduce clutter from i915_drv.h and intel_drv.h. Reviewed-by:
-
Jani Nikula authored
And ensure it stays that way. Reviewed-by:
-
Jani Nikula authored
Reduce clutter from i915_drv.h. Reviewed-by:
-
Jani Nikula authored
It used to be handy that we only had a couple of headers, but over time i915_drv.h has become unwieldy. Extract declarations to a separate header file corresponding to the implementation module, clarifying the modularity of the driver. Ensure the new header is self-contained, and do so with minimal further includes, using forward declarations as needed. Include the new header only where needed, and sort the modified include directives while at it and as needed. No functional changes. Reviewed-by:
-
Jani Nikula authored
It used to be handy that we only had a couple of headers, but over time i915_drv.h has become unwieldy. Extract declarations to a separate header file corresponding to the implementation module, clarifying the modularity of the driver. Ensure the new header is self-contained, and do so with minimal further includes, using forward declarations as needed. Include the new header only where needed, and sort the modified include directives while at it and as needed. No functional changes. Reviewed-by:
-
Jani Nikula authored
It used to be handy that we only had a couple of headers, but over time i915_drv.h has become unwieldy. Extract declarations to a separate header file corresponding to the implementation module, clarifying the modularity of the driver. Ensure the new header is self-contained, and do so with minimal further includes, using forward declarations as needed. Include the new header only where needed, and sort the modified include directives while at it and as needed. No functional changes. Reviewed-by:
-
Jani Nikula authored
It used to be handy that we only had a couple of headers, but over time i915_drv.h has become unwieldy. Extract declarations to a separate header file corresponding to the implementation module, clarifying the modularity of the driver. Ensure the new header is self-contained, and do so with minimal further includes, using forward declarations as needed. Include the new header only where needed, and sort the modified include directives while at it and as needed. No functional changes. Reviewed-by:
-
Jani Nikula authored
Reduce clutter from i915_drv.h. Reviewed-by:
-
Jani Nikula authored
Reduce clutter from intel_drv.h. Reviewed-by:
-
Jani Nikula authored
Reduce clutter from intel_drv.h with the minimal change. Reviewed-by:
-
Jani Nikula authored
Reduce clutter from intel_drv.h with the minimal change. Reviewed-by:
-
Jani Nikula authored
Reduce clutter from intel_drv.h with the minimal change. Reviewed-by:
-
Jani Nikula authored
Work on the principle that files should prefer not to expose platform specific functions. v2, v3: Rebase Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
