With MADV_DONTNEED support added to hugetlb mappings, mremap testing can
also be enabled for hugetlb.

Modify the tests to use madvise MADV_DONTNEED and MADV_REMOVE instead of
fallocate hole puch for releasing hugetlb pages.

Link: https://lkml.kernel.org/r/20220215002348.128823-4-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that MADV_DONTNEED support for hugetlb is enabled, add corresponding
tests.  MADV_REMOVE has been enabled for some time, but no tests exist so
add them as well.

Link: https://lkml.kernel.org/r/20220215002348.128823-3-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Add hugetlb MADV_DONTNEED support", v3.

Userfaultfd selftests for hugetlb does not perform UFFD_EVENT_REMAP
testing.  However, mremap support was recently added in commit
550a7d60 ("mm, hugepages: add mremap() support for hugepage backed
vma").  While attempting to enable mremap support in the test, it was
discovered that the mremap test indirectly depends on MADV_DONTNEED.

madvise does not allow MADV_DONTNEED for hugetlb mappings.  However, that
is primarily due to the check in can_madv_lru_vma().  By simply removing
the check and adding huge page alignment, MADV_DONTNEED can be made to
work for hugetlb mappings.

Do note that there is no compelling use case for adding this support.
This was discussed in the RFC [1].  However, adding support makes sense as
it is fairly trivial and brings hugetlb functionality more in line with
'normal' memory.

After enabling support, add selftest for MADV_DONTNEED as well as
MADV_REMOVE.  Then update userfaultfd selftest.

If new functionality is accepted, then madvise man page will be updated to
indicate hugetlb is supported.  It will also be updated to clarify what
happens to the passed length argument.

This patch (of 3):

MADV_DONTNEED is currently disabled for hugetlb mappings.  This certainly
makes sense in shared file mappings as the pagecache maintains a reference
to the page and it will never be freed.  However, it could be useful to
unmap and free pages in private mappings.  In addition, userfaultfd minor
fault users may be able to simplify code by using MADV_DONTNEED.

The primary thing preventing MADV_DONTNEED from working on hugetlb
mappings is a check in can_madv_lru_vma().  To allow support for hugetlb
mappings create and use a new routine madvise_dontneed_free_valid_vma()
that allows hugetlb mappings in this specific case.

For normal mappings, madvise requires the start address be PAGE aligned
and rounds up length to the next multiple of PAGE_SIZE.  Do similarly for
hugetlb mappings: require start address be huge page size aligned and
round up length to the next multiple of huge page size.  Use the new
madvise_dontneed_free_valid_vma routine to check alignment and round up
length/end.  zap_page_range requires this alignment for hugetlb vmas
otherwise we will hit BUGs.

Link: https://lkml.kernel.org/r/20220215002348.128823-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220215002348.128823-2-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If LOCKDEP detects a bug while KASAN is printing a report and if
panic_on_warn is set, KASAN will not be able to finish.  Disable LOCKDEP
while KASAN is printing a report.

See https://bugzilla.kernel.org/show_bug.cgi?id=202115 for an example
of the issue.

Link: https://lkml.kernel.org/r/c48a2a3288200b07e1788b77365c2f02784cfeb4.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - Move kasan_save_enable/restore_multi_shot() declarations to
   mm/kasan/kasan.h, as there is no need for them to be visible outside
   of KASAN implementation.

 - Only define and export these functions when KASAN tests are enabled.

 - Move their definitions closer to other test-related code in report.c.

Link: https://lkml.kernel.org/r/6ba637333b78447f027d775f2d55ab1a40f63c99.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move print_error_description()'s, report_suppressed()'s, and
report_enabled()'s definitions to improve the logical order of function
definitions in report.c.

No functional changes.

Link: https://lkml.kernel.org/r/82aa926c411e00e76e97e645a551ede9ed0c5e79.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, only kasan_report() checks the KASAN_BIT_REPORTED and
KASAN_BIT_MULTI_SHOT flags.

Make other reporting routines check these flags as well.

Also add explanatory comments.

Note that the current->kasan_depth check is split out into
report_suppressed() and only called for kasan_report().

Link: https://lkml.kernel.org/r/715e346b10b398e29ba1b425299dcd79e29d58ce.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a comment explaining why kasan_report() is the only reporting function
that uses user_access_save/restore().

Link: https://lkml.kernel.org/r/1201ca3c2be42c7bd077c53d2e46f4a51dd1476a.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Rename kasan_access_info to kasan_report_info, as the latter name better
reflects the struct's purpose.

Link: https://lkml.kernel.org/r/158a4219a5d356901d017352558c989533a0782c.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Place kasan_report_async() next to the other main reporting routines.
Also simplify printed information.

Link: https://lkml.kernel.org/r/52d942ef3ffd29bdfa225bbe8e327bc5bda7ab09.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Call print_report() in kasan_report_invalid_free() instead of calling
printing functions directly.  Compared to the existing implementation of
kasan_report_invalid_free(), print_report() makes sure that the buggy
address has metadata before printing it.

The change requires adding a report type field into kasan_access_info and
using it accordingly.

kasan_report_async() is left as is, as using print_report() will only
complicate the code.

Link: https://lkml.kernel.org/r/9ea6f0604c5d2e1fb28d93dc6c44232c1f8017fe.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge __kasan_report() into kasan_report().  The code is simple enough to
be readable without the __kasan_report() helper.

Link: https://lkml.kernel.org/r/c8a125497ef82f7042b3795918dffb81a85a878e.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Restructure kasan_report() to make reviewing the subsequent patches
easier.

Link: https://lkml.kernel.org/r/ca28042889858b8cc4724d3d4378387f90d7a59d.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move the addr_has_metadata() check into kasan_find_first_bad_addr().

Link: https://lkml.kernel.org/r/a49576f7a23283d786ba61579cb0c5057e8f0b9b.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Split out the part of __kasan_report() that prints things into
print_report().  One of the subsequent patches makes another error handler
use print_report() as well.

Includes lower-level changes:

 - Allow addr_has_metadata() accepting a tagged address.

 - Drop the const qualifier from the fields of kasan_access_info to
   avoid excessive type casts.

 - Change the type of the address argument of __kasan_report() and
   end_report() to void * to reduce the number of type casts.

Link: https://lkml.kernel.org/r/9be3ed99dd24b9c4e1c4a848b69a0c6ecefd845e.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move the disable_trace_on_warning() call, which enables the
/proc/sys/kernel/traceoff_on_warning interface for KASAN bugs, to
start_report(), so that it functions for all types of KASAN reports.

Link: https://lkml.kernel.org/r/7c066c5de26234ad2cebdd931adfe437f8a95d58.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of duplicating calls to update_kunit_status() in every error
report routine, call it once in start_report().  Pass the sync flag as an
additional argument to start_report().

Link: https://lkml.kernel.org/r/cae5c845a0b6f3c867014e53737cdac56b11edc7.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Check the more specific CONFIG_KASAN_KUNIT_TEST config option when
defining things related to KUnit-compatible KASAN tests instead of
CONFIG_KUNIT.

Also put the kunit_kasan_status definition next to the definitons of other
KASAN-related structs.

Link: https://lkml.kernel.org/r/223592d38d2a601a160a3b2b3d5a9f9090350e62.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - Rename kasan_update_kunit_status() to update_kunit_status() (the
   function is static).

 - Move the IS_ENABLED(CONFIG_KUNIT) to the function's definition
   instead of duplicating it at call sites.

 - Obtain and check current->kunit_test within the function.

Link: https://lkml.kernel.org/r/dac26d811ae31856c3d7666de0b108a3735d962d.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, end_report() does not call trace_error_report_end() for bugs
detected in either async or asymm mode (when kasan_async_fault_possible()
returns true), as the address of the bad access might be unknown.

However, for asymm mode, the address is known for faults triggered by read
operations.

Instead of using kasan_async_fault_possible(), simply check that the addr
is not NULL when calling trace_error_report_end().

Link: https://lkml.kernel.org/r/1c8ce43f97300300e62c941181afa2eb738965c5.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Software Tag-Based mode tags stack allocations when CONFIG_KASAN_STACK
is enabled. Print task name and id in reports for stack-related bugs.

[andreyknvl@google.com: include linux/sched/task_stack.h]
  Link: https://lkml.kernel.org/r/d7598f11a34ed96e508f7640fa038662ed2305ec.1647099922.git.andreyknvl@google.com

Link: https://lkml.kernel.org/r/029aaa87ceadde0702f3312a34697c9139c9fb53.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - Print at least task name and id for reports affecting allocas
   (get_address_stack_frame_info() does not support them).

 - Capitalize first letter of each sentence.

Link: https://lkml.kernel.org/r/aa613f097c12f7b75efb17f2618ae00480fb4bc3.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - Move printing stack frame info before printing page info.

 - Add object_is_on_stack() check to print_address_description() and add
   a corresponding WARNING to kasan_print_address_stack_frame(). This
   looks more in line with the rest of the checks in this function and
   also allows to avoid complicating code logic wrt line breaks.

 - Clean up comments related to get_address_stack_frame_info().

Link: https://lkml.kernel.org/r/1ee113a4c111df97d168c820b527cda77a3cac40.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a line break after each part that describes the buggy address.
Improves readability of reports.

Link: https://lkml.kernel.org/r/8682c4558e533cd0f99bdb964ce2fe741f2a9212.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "kasan: report clean-ups and improvements".

A number of clean-up patches for KASAN reporting code.  Most are
non-functional and only improve readability.

This patch (of 22):

describe_object_addr() used to be called with NULL addr in the early days
of KASAN.  This no longer happens, so drop the check.

Link: https://lkml.kernel.org/r/cover.1646237226.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/761f8e5a6ee040d665934d916a90afe9f322f745.1646237226.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Print virtual mapping range and its creator in reports affecting virtual
mappings.

Also get physical page pointer for such mappings, so page information gets
printed as well.

Link: https://lkml.kernel.org/r/6ebb11210ae21253198e264d4bb0752c1fad67d7.1645548178.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The function kasan_global_oob was renamed to kasan_global_oob_right, but
the comments referring to it were not updated.  Do so.

Link: https://linux-review.googlesource.com/id/I20faa90126937bbee77d9d44709556c3dd4b40be
Link: https://lkml.kernel.org/r/20220219012433.890941-1-pcc@google.comSigned-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In mm/Makefile has:

  obj-$(CONFIG_KASAN)     += kasan/

So that we don't need 'obj-$(CONFIG_KASAN) :=' in mm/kasan/Makefile,
delete it from mm/kasan/Makefile.

Link: https://lkml.kernel.org/r/20220221065421.20689-1-tangmeng@uniontech.comSigned-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Async mode support has already been implemented in commit e80a76aa
("kasan, arm64: tests supports for HW_TAGS async mode") but then got
accidentally broken in commit 99734b53 ("kasan: detect false-positives
in tests").

Restore the changes removed by the latter patch and adapt them for asymm
mode: add a sync_fault flag to kunit_kasan_expectation that only get set
if the MTE fault was synchronous, and reenable MTE on such faults in
tests.

Also rename kunit_kasan_expectation to kunit_kasan_status and move its
definition to mm/kasan/kasan.h from include/linux/kasan.h, as this
structure is only internally used by KASAN.  Also put the structure
definition under IS_ENABLED(CONFIG_KUNIT).

Link: https://lkml.kernel.org/r/133970562ccacc93ba19d754012c562351d4a8c8.1645033139.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the existing vmalloc_oob() test to account for the specifics of the
tag-based modes.  Also add a few new checks and comments.

Add new vmalloc-related tests:

 - vmalloc_helpers_tags() to check that exported vmalloc helpers can
   handle tagged pointers.

 - vmap_tags() to check that SW_TAGS mode properly tags vmap() mappings.

 - vm_map_ram_tags() to check that SW_TAGS mode properly tags
   vm_map_ram() mappings.

 - vmalloc_percpu() to check that SW_TAGS mode tags regions allocated
   for __alloc_percpu(). The tagging of per-cpu mappings is best-effort;
   proper tagging is tracked in [1].

[1] https://bugzilla.kernel.org/show_bug.cgi?id=215019

[sfr@canb.auug.org.au: similar to "kasan: test: fix compatibility with FORTIFY_SOURCE"]
  Link: https://lkml.kernel.org/r/20220128144801.73f5ced0@canb.auug.org.au
  Link: https://lkml.kernel.org/r/865c91ba49b90623ab50c7526b79ccb955f544f0.1644950160.git.andreyknvl@google.com
[andreyknvl@google.com: set_memory_rw/ro() are not exported to modules]
  Link: https://lkml.kernel.org/r/019ac41602e0c4a7dfe96dc8158a95097c2b2ebd.1645554036.git.andreyknvl@google.com
[akpm@linux-foundation.org: fix build]

Cc: Andrey Konovalov <andreyknvl@gmail.com>
[andreyknvl@google.com: vmap_tags() and vm_map_ram_tags() pass invalid page array size]
Link: https://lkml.kernel.org/r/bbdc1c0501c5275e7f26fdb8e2a7b14a40a9f36b.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update KASAN documentation:

 - Bump Clang version requirement for HW_TAGS as ARM64_MTE depends on
   AS_HAS_LSE_ATOMICS as of commit 2decad92 ("arm64: mte: Ensure
   TIF_MTE_ASYNC_FAULT is set atomically"), which requires Clang 12.

 - Add description of the new kasan.vmalloc command line flag.

 - Mention that SW_TAGS and HW_TAGS modes now support vmalloc tagging.

 - Explicitly say that the "Shadow memory" section is only applicable to
   software KASAN modes.

 - Mention that shadow-based KASAN_VMALLOC is supported on arm64.

Link: https://lkml.kernel.org/r/a61189128fa3f9fbcfd9884ff653d401864b8e74.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Generic KASAN already selects KASAN_VMALLOC to allow VMAP_STACK to be
selected unconditionally, see commit acc3042d ("arm64: Kconfig:
select KASAN_VMALLOC if KANSAN_GENERIC is enabled").

The same change is needed for SW_TAGS KASAN.

HW_TAGS KASAN does not require enabling KASAN_VMALLOC for VMAP_STACK, they
already work together as is.  Still, selecting KASAN_VMALLOC still makes
sense to make vmalloc() always protected.  In case any bugs in KASAN's
vmalloc() support are discovered, the command line kasan.vmalloc flag can
be used to disable vmalloc() checking.

Select KASAN_VMALLOC for all KASAN modes for arm64.

Link: https://lkml.kernel.org/r/99d6b3ebf57fc1930ff71f9a4a71eea19881b270.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow enabling CONFIG_KASAN_VMALLOC with SW_TAGS and HW_TAGS KASAN modes.

Also adjust CONFIG_KASAN_VMALLOC description:

 - Mention HW_TAGS support.

 - Remove unneeded internal details: they have no place in Kconfig
   description and are already explained in the documentation.

Link: https://lkml.kernel.org/r/bfa0fdedfe25f65e5caa4e410f074ddbac7a0b59.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow disabling vmalloc() tagging for HW_TAGS KASAN via a kasan.vmalloc
command line switch.

This is a fail-safe switch intended for production systems that enable
HW_TAGS KASAN.  In case vmalloc() tagging ends up having an issue not
detected during testing but that manifests in production, kasan.vmalloc
allows to turn vmalloc() tagging off while leaving page_alloc/slab
tagging on.

Link: https://lkml.kernel.org/r/904f6d4dfa94870cc5fc2660809e093fd0d27c3b.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - Untie kasan_init_hw_tags() code from the default values of
   kasan_arg_mode and kasan_arg_stacktrace.

 - Move static_branch_enable(&kasan_flag_enabled) to the end of
   kasan_init_hw_tags_cpu().

 - Remove excessive comments in kasan_arg_mode switch.

 - Add new comments.

Link: https://lkml.kernel.org/r/76ebb340265be57a218564a497e1f52ff36a3879.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As kasan_arg_stacktrace is only used in __init functions, mark it as
__initdata instead of __ro_after_init to allow it be freed after boot.

The other enums for KASAN args are used in kasan_init_hw_tags_cpu(), which
is not marked as __init as a CPU can be hot-plugged after boot.  Clarify
this in a comment.

Link: https://lkml.kernel.org/r/7fa090865614f8e0c6c1265508efb1d429afaa50.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Besides asking vmalloc memory to be executable via the prot argument of
__vmalloc_node_range() (see the previous patch), the kernel can skip that
bit and instead mark memory as executable via set_memory_x().

Once tag-based KASAN modes start tagging vmalloc allocations, executing
code from such allocations will lead to the PC register getting a tag,
which is not tolerated by the kernel.

Generic kernel code typically allocates memory via module_alloc() if it
intends to mark memory as executable.  (On arm64 module_alloc() uses
__vmalloc_node_range() without setting the executable bit).

Thus, reset pointer tags of pointers returned from module_alloc().

However, on arm64 there's an exception: the eBPF subsystem.  Instead of
using module_alloc(), it uses vmalloc() (via bpf_jit_alloc_exec()) to
allocate its JIT region.

Thus, reset pointer tags of pointers returned from bpf_jit_alloc_exec().

Resetting tags for these pointers results in untagged pointers being
passed to set_memory_x().  This causes conflicts in arithmetic checks in
change_memory_common(), as vm_struct->addr pointer returned by
find_vm_area() is tagged.

Reset pointer tag of find_vm_area(addr)->addr in change_memory_common().

Link: https://lkml.kernel.org/r/b7b2595423340cd7d76b770e5d519acf3b72f0ab.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel can use to allocate executable memory.  The only supported
way to do that is via __vmalloc_node_range() with the executable bit set
in the prot argument.  (vmap() resets the bit via pgprot_nx()).

Once tag-based KASAN modes start tagging vmalloc allocations, executing
code from such allocations will lead to the PC register getting a tag,
which is not tolerated by the kernel.

Only tag the allocations for normal kernel pages.

[andreyknvl@google.com: pass KASAN_VMALLOC_PROT_NORMAL to kasan_unpoison_vmalloc()]
  Link: https://lkml.kernel.org/r/9230ca3d3e40ffca041c133a524191fd71969a8d.1646233925.git.andreyknvl@google.com
[andreyknvl@google.com: support tagged vmalloc mappings]
  Link: https://lkml.kernel.org/r/2f6605e3a358cf64d73a05710cb3da356886ad29.1646233925.git.andreyknvl@google.com
[andreyknvl@google.com: don't unintentionally disabled poisoning]
  Link: https://lkml.kernel.org/r/de4587d6a719232e83c760113e46ed2d4d8da61e.1646757322.git.andreyknvl@google.com

Link: https://lkml.kernel.org/r/fbfd9939a4dc375923c9a5c6b9e7ab05c26b8c6b.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add vmalloc tagging support to HW_TAGS KASAN.

The key difference between HW_TAGS and the other two KASAN modes when it
comes to vmalloc: HW_TAGS KASAN can only assign tags to physical memory.
The other two modes have shadow memory covering every mapped virtual
memory region.

Make __kasan_unpoison_vmalloc() for HW_TAGS KASAN:

 - Skip non-VM_ALLOC mappings as HW_TAGS KASAN can only tag a single
   mapping of normal physical memory; see the comment in the function.

 - Generate a random tag, tag the returned pointer and the allocation,
   and initialize the allocation at the same time.

 - Propagate the tag into the page stucts to allow accesses through
   page_address(vmalloc_to_page()).

The rest of vmalloc-related KASAN hooks are not needed:

 - The shadow-related ones are fully skipped.

 - __kasan_poison_vmalloc() is kept as a no-op with a comment.

Poisoning and zeroing of physical pages that are backing vmalloc()
allocations are skipped via __GFP_SKIP_KASAN_UNPOISON and
__GFP_SKIP_ZERO: __kasan_unpoison_vmalloc() does that instead.

Enabling CONFIG_KASAN_VMALLOC with HW_TAGS is not yet allowed.

Link: https://lkml.kernel.org/r/d19b2e9e59a9abc59d05b72dea8429dcaea739c6.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a new GFP flag __GFP_SKIP_ZERO that allows to skip memory
initialization.  The flag is only effective with HW_TAGS KASAN.

This flag will be used by vmalloc code for page_alloc allocations backing
vmalloc() mappings in a following patch.  The reason to skip memory
initialization for these pages in page_alloc is because vmalloc code will
be initializing them instead.

With the current implementation, when __GFP_SKIP_ZERO is provided,
__GFP_ZEROTAGS is ignored.  This doesn't matter, as these two flags are
never provided at the same time.  However, if this is changed in the
future, this particular implementation detail can be changed as well.

Link: https://lkml.kernel.org/r/0d53efeff345de7d708e0baa0d8829167772521e.1643047180.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>