Commit b99182c5 ("bio: add pcpu caching for non-polling bio_put")
removed the code that uses this constant. Hence also remove the constant
itself.

Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230209230135.3475829-1-bvanassche@acm.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since commit ee6d3dd4 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230208-kobj_type-block-v1-1-0b3eafd7d983@weissschuh.netSigned-off-by: Jens Axboe <axboe@kernel.dk>

It checks if plug->cached_rq is empty before merging bio. But the merge action
doesn't have relationship with plug->cached_rq, it trys to merge bio with
requests within plug->mq_list. Now it checks if ->cached_rq is empty before
merging bio. If it's empty, it will miss the merge chances. So move the merge
function before checking ->cached_rq.
Signed-off-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230209031930.27354-1-xni@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

It turns out this was too soon.  blkg_conf_prep does to funky locking games
with the queue lock for this to work properly.

This reverts commit 27b642b0.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230209053523.437927-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

While del_gendisk ensures there is no outstanding I/O on the queue,
it can't prevent block layer users from building new I/O.

This leads to a NULL ->root_blkg reference in bio_associate_blkg when
allocating a new bio on a shut down file system.  Delay freeing the
blk-cgroup subsystems from del_gendisk until disk_release to make
sure the blkg and throttle information is still avaіlable for bio
submitters, even if those bios will immediately fail.

This now can cause a case where disk_release is called on a disk
that hasn't been added.  That's mostly harmless, except for a case
in blk_throttl_exit that now needs to check for a NULL ->td pointer.

Fixes: 178fa7d4 ("blk-cgroup: delay blk-cgroup initialization until add_disk")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230208063514.171485-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.3/block

Pull MD fix from Song:

"This commit fixes a rare crash during the takeover process."

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: account io_acct_set usage with active_io

io_acct_set was enabled for raid0/raid5 io accounting. bios that contain
md_io_acct are allocated in the i/o path. There isn't a good method to
monitor if these bios are all finished and freed. In the takeover process,
io_acct_set (which is used for bios with md_io_acct) need to be freed.
However, if some bios finish after io_acct_set is freed, it may trigger
the following panic:

[ 6973.767999] RIP: 0010:mempool_free+0x52/0x80
[ 6973.786098] Call Trace:
[ 6973.786549]  md_end_io_acct+0x31/0x40
[ 6973.787227]  blk_update_request+0x224/0x380
[ 6973.787994]  blk_mq_end_request+0x1a/0x130
[ 6973.788739]  blk_complete_reqs+0x35/0x50
[ 6973.789456]  __do_softirq+0xd7/0x2c8
[ 6973.790114]  ? sort_range+0x20/0x20
[ 6973.790763]  run_ksoftirqd+0x2a/0x40
[ 6973.791400]  smpboot_thread_fn+0xb5/0x150
[ 6973.792114]  kthread+0x10b/0x130
[ 6973.792724]  ? set_kthread_struct+0x50/0x50
[ 6973.793491]  ret_from_fork+0x1f/0x40

Fix this by increasing and decreasing active_io for each bio with
md_io_acct so that mddev_suspend() will wait until all bios from
io_acct_set finish before freeing io_acct_set.
Reported-by: Fine Fan <ffan@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>

Inside ublk_ctrl_del_dev(), when the device is removed, we wait
until the device number is freed with holding global lock of
ublk_ctl_mutex, this way isn't friendly from user viewpoint:

1) if device is in-use, the current delete command hangs in
ublk_ctrl_del_dev(), and user can't break from the handling
because wait_event() is used

2) global lock is held, so any new device can't be added and
other old devices can't be removed.

Improve the deleting handling by the following way, suggested by
Nadav:

1) wait without holding the global lock

2) replace wait_event() with wait_event_interruptible()
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207150700.545530-1-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

After commit dfd6200a ("blk-cgroup: support to track if policy is
online"), there is no need to do this again in bfq.

However, 'pd->online' is not protected by 'bfqd->lock', in order to make
sure bfq won't see that 'pd->online' is still set after bfq_pd_offline(),
clear it before bfq_pd_offline() is called. This is fine because other
polices doesn't use 'pd->online' and bfq_pd_offline() will move active
bfqq to root cgroup anyway.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230202134913.2364549-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe updates from Christoph:

"nvme updates for Linux 6.3

 - small improvements to the logging functionality (Amit Engel)
 - authentication cleanups (Hannes Reinecke)
 - cleanup and optimize the DMA mapping cod in the PCIe driver
   (Keith Busch)
 - work around the command effects for Format NVM (Keith Busch)
 - misc cleanups (Keith Busch, Christoph Hellwig)"

* tag 'nvme-6.3-2023-02-07' of git://git.infradead.org/nvme:
  nvme: mask CSE effects for security receive
  nvme: always initialize known command effects
  nvmet: for nvme admin set_features cmd, call nvmet_check_data_len_lte()
  nvme-tcp: add additional info for nvme_tcp_timeout log
  nvme: add nvme_opcode_str function for all nvme cmd types
  nvme: remove nvme_execute_passthru_rq
  nvme-pci: place descriptor addresses in iod
  nvme-pci: use mapped entries for sgl decision
  nvme-pci: remove SGL segment descriptors
  nvme-auth: don't use NVMe status codes
  nvme-fabrics: clarify AUTHREQ result handling

queuedata is not referenced in ublk_drv and we can use driver_data
instead. Pass NULL to blk_mq_alloc_disk() as queuedata while allocating
ublk's gendisk.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-4-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

WRITE_ZEROES won't return bytes returned just like FLUSH and DISCARD,
and we can end it directly. Add missing comment for it in
ublk_complete_rq().
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-3-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

bio_has_data() allows a NULL bio so the NULL check in
ublk_rq_has_data() is unnecessary.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-2-ZiyangZhang@linux.alibaba.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230202141956.2299521-1-gregkh@linuxfoundation.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit 88022d72 ("blk-mq: don't handle failure in .get_budget")
remove BLK_STS_RESOURCE return value and we only check if we can get
the budget from .get_budget() now.
Correct stale comment that ".get_budget() returns BLK_STS_NO_RESOURCE"
to ".get_budget() fails to get the budget".

Fixes: 88022d72 ("blk-mq: don't handle failure in .get_budget")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use switch/case handle error as other function do to improve
readability in blk_mq_try_issue_list_directly.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit 113285b4 ("blk-mq: ensure that bd->last is always set
correctly") will set last if we failed to get driver tag for next
request to avoid flush miss as we break the list walk and will not
send the last request in the list which will be sent with last set
normally.
This code seems stale now becase the flush introduced is always
redundant as:
For case tag is really out, we will send a extra flush if we find
list is not empty after list walk.
For case some tag is freed before retry in blk_mq_prep_dispatch_rq for
next, then we can get a tag for next request in retry and flush notified
already is not necessary.

Just remove these stale codes.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk_mq_dispatch_rq_list will notify if hctx is busy in return bool. It will
return true if we are not busy and can handle more and return false on the
opposite. Inside blk_mq_dispatch_rq_list, errors is only used if list is
empty and we will return true if list is empty and (errors + queued) != 0.

There are three types of status returned from request:
 -busy error BLK_STS*_RESOURCE: the failed request will be added back
to list and list will not be empty.
 -BLK_STS_OK: We count queued for BLK_STS_OK
 -rest error: We count errors for rest error

If list is empty, there is no request gets busy error then (errors +
queued) will be total requests in the list which is checked not empty at
beginning of blk_mq_dispatch_rq_list. So (errors + queued) != 0 is always
met if list is empty. Then the (errors + queued) != 0 check and errors
number count is not needed.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1. Remove check of needs_resource and ret == BLK_STS_DEV_RESOURCE.
For busy error BLK_STS*_RESOURCE, request will always be added
back to list, so need_resource will not be true and ret will
not be == BLK_STS_DEV_RESOURCE if list is empty. We could remove
these dead check.

2. Check ret of last request instead of errors
If list is empty, we only need to explicitly commit_rqs
if error happens at last request which is stored in ret. So check
ret of last request instead of errors to remove unnecessary
commit_rqs triggered by errors returned from previous request.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Call blk_mq_commit_rqs instead of access ->commit_rqs directly. As you
can see in comment of blk_mq_commit_rqs, we only need explicitly call
this in two cases:
 -did not queue everything initially scheduled to queue
 -the last attempt to queue a request failed
Both cases can be checked with ret of last request which breaks list
walk. Then we can remove unnecessary error count and unnecessary
commit triggered by error besides cases described above.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need only to explicitly commit in two error cases:
 -did not queue everything initially scheduled to queue
 -the last attempt to queue a request failed
(see comment of blk_mq_commit_rqs for more details).
Both cases can be checked with ret of last request which breaks list walk.
Remove unnecessary error count and unnecessary commit triggered by error
which is not covered by cases described above.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1. move blk_mq_commit_rqs forward before functions need commits.
2. add queued check and only commits request if any request was queued
in blk_mq_commit_rqs to keep commit behavior consistent and remove
unnecessary commit.
3. split the queued clearing from blk_mq_plug_commit_rqs as it is
not wanted general.
4. sync current caller of blk_mq_commit_rqs with new general
blk_mq_commit_rqs.
5. document rule for unusual cases which need explicit commit_rqs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Function blk_mq_plug_issue_direct tries to issue batch requests in plug
list to driver directly. We will only issue plug request to driver if we
are not from scheduler, so from_scheduler parameter of
blk_mq_plug_issue_direct is always false.
Remove unncessary from_scheduler of blk_mq_plug_issue_direct.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We only break the list walk if we get 'BLK_STS_*RESOURCE'. We also
count errors for 'BLK_STS_*RESOURCE' error. If list is not empty,
errors will always be non-zero. So we can remove unnecessary list_empty
check. This will remove redundant list_empty check for case that
error happened at sending last request in list.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit f906a6a0 ("blk-mq: improve tag waiting setup for non-shared
tags") mark restart for unshared tags for improvement. At that time,
tags is only shared betweens queues and we can check if tags is shared
by test BLK_MQ_F_TAG_SHARED.
Afterwards, commit 32bc15af ("blk-mq: Facilitate a shared sbitmap per
tagset") enabled tags share betweens hctxs inside a queue. We only
mark restart for shared hctxs inside a queue and may cause io hung if
there is no tag currently allocated by hctxs going to be marked restart.
Wait on sbitmap_queue instead of mark restart for shared hctxs case to
fix this.

Fixes: 32bc15af ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For shared queues case, we will only wait on bitmap_tags if we fail to get
driver tag. However, rq could be from breserved_tags, then two problems
will occur:
1. io hung if no tag is currently allocated from bitmap_tags.
2. unnecessary wakeup when tag is freed to bitmap_tags while no tag is
freed to breserved_tags.
Wait on the bitmap which rq from to fix this.

Fixes: f906a6a0 ("blk-mq: improve tag waiting setup for non-shared tags")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit 97889f9a ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()") remove handle of TAG_SHARED in restart,
then shared_hctx_restart counted for how many hardware queues are marked
for restart is removed too.
Remove the stale comment that we still count hardware queues need restart.

Fixes: 97889f9a ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit 1f5bd336 ("blk-mq: add blk_mq_alloc_request_hctx") add
blk_mq_alloc_request_hctx to send commands to a specific queue. If
BLK_MQ_REQ_NOWAIT is not set in tag allocation, we may change to different
hctx after sleep and get tag from unexpected hctx. So BLK_MQ_REQ_NOWAIT
must be set in flags for blk_mq_alloc_request_hctx.
After commit 600c3b0c ("blk-mq: open code __blk_mq_alloc_request in
blk_mq_alloc_request_hctx"), blk_mq_alloc_request_hctx return -EINVAL
if both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED are not set instead of
if BLK_MQ_REQ_NOWAIT is not set. So if BLK_MQ_REQ_NOWAIT is not set and
BLK_MQ_REQ_RESERVED is set, blk_mq_alloc_request_hctx could alloc tag
from unexpected hctx. I guess what we need here is that return -EINVAL
if either BLK_MQ_REQ_NOWAIT or BLK_MQ_REQ_RESERVED is not set.

Currently both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED will be set if
specific hctx is needed in nvme_auth_submit, nvmf_connect_io_queue
and nvmf_connect_admin_queue. Fix the potential BLK_MQ_REQ_NOWAIT missed
case in future.

Fixes: 600c3b0c ("blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The capability attribute was added in 2017 to expose the kernel internal
GENHD_FL_MEDIA_CHANGE_NOTIFY to userspace without ever adding a value to
an UAPI header, and without ever setting it in any driver until it was
finally removed in Linux 5.7.

Deprecate the file and always return 0 instead of exposing the other
internal and frequently renumbered other gendisk flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230203150209.3199115-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

new_blkg can be NULL if the caller didn't pass in a pre-allocated blkg.
Don't try to free it in that case.

Fixes: 27b642b0 ("blk-cgroup: simplify blkg freeing from initialization failure paths")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230206150201.3438972-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-24-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-23-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-22-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-21-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-20-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-19-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-18-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page and bvec_set_folio helpers to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-17-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-16-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-15-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>