- 09 May, 2007 40 commits
-
-
David Miller authored
u64 and s64 are not necessarily 'long long' on some 64-bit platforms, so explicit the type to kill the compiler warnings. Also consistently use '%Lu' which is unsigned. Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Borislav Petkov authored
Get the kernel version string only once from the environment, thus slightly speeding up kernel-doc. Signed-off-by:
Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Randy Dunlap authored
It seems that we need to clarify that a patch series is a series of related patches rather than "here are some of my patches as multiple (numbered) emails." Signed-off-by:
-
Josef 'Jeff' Sipek authored
Since path_walk sets the total_link_count to 0 and calls link_path_walk, we can just call path_walk directly. Signed-off-by:
Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Acked-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Josef 'Jeff' Sipek authored
Signed-off-by:
-
Daniel Walker authored
There's more that need fixing, and fix my own subject spelling error too. Signed-off-by:
Daniel Walker <dwalker@mvista.com> Signed-off-by:
-
Andrew Morton authored
It's not sane to use mutex_lock_interruptible() and to then ignore the result. Ditto down_interruptible(), but I'm lazy. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Paul Fulghum authored
Fix tty_set_ldisc in tty_io.c so that tty->receive_room is only cleared if actually changing line disciplines. Without this fix a problem occurs when requesting the line discipline to change to the same line discipline. In this case tty->receive_room is cleared but ldisc->open() is not called to set tty->receive_room back to a sane value. The result is that tty->receive_room is stuck at 0 preventing the tty flip buffer from passing receive data to the line discipline. For example: a switch from N_TTY to N_TTY followed by a select() call for read input results in data never being received because tty->receive_room is stuck at zero. A switch from N_TTY to N_TTY followed by a read() call works because the read() call itself sets tty->receive_room correctly (but select does not). Previously (< 2.6.18) this was not a problem because the tty flip buffer pushed data to the line discipline without regard for tty->receive room. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Roland McGrath authored
This patch moves the sig_kernel_* and related macros from kernel/signal.c to linux/signal.h, and cleans them up slightly. I need the sig_kernel_* macros for default signal behavior in the utrace code, and want to avoid duplication or overhead to share the knowledge. Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
WANG Cong authored
[akpm@linux-foundation.org: fix it] Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by:
-
Olof Johansson authored
Driver for the on-chip hardware random number generator on PA Semi PA6T-1682M. Signed-off-by:
Egor Martovetsky <egor@pasemi.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Michael Buesch <mb@bu3sch.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by:
-
Roland Dreier authored
Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Ken Chen authored
When cpuset is configured, it breaks the strict hugetlb page reservation as the accounting is done on a global variable. Such reservation is completely rubbish in the presence of cpuset because the reservation is not checked against page availability for the current cpuset. Application can still potentially OOM'ed by kernel with lack of free htlb page in cpuset that the task is in. Attempt to enforce strict accounting with cpuset is almost impossible (or too ugly) because cpuset is too fluid that task or memory node can be dynamically moved between cpusets. The change of semantics for shared hugetlb mapping with cpuset is undesirable. However, in order to preserve some of the semantics, we fall back to check against current free page availability as a best attempt and hopefully to minimize the impact of changing semantics that cpuset has on hugetlb. Signed-off-by:
Ken Chen <kenchen@google.com> Cc: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Akinobu Mita authored
Cleanup using simple_read_from_buffer() for /dev/cpuset/tasks and /proc/config.gz. Cc: Paul Jackson <pj@sgi.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
Cleanup using simple_read_from_buffer() in binfmt_misc, configfs, and sysfs. Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Joel Becker <joel.becker@oracle.com> Signed-off-by:
-
Akinobu Mita authored
Cleanup using bitrev8 in cm4000_cs driver. Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by:
-
Akinobu Mita authored
This patch fixes error paths in module_init and probe functions in cm4000_cs and cm4040_cs drivers. Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by:
-
James Bottomley authored
The MCA bus has a few "integrated" functions, which are effectively virtual slots on the bus. The problem is that these special functions don't have dedicated pos IDs, so we have to manufacture ids for them outside the pos space ... and these ids can't be matched by the standard matching function, so add a special registration that requests a list of pos ids or a particular integrated function. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
James Bottomley authored
There's a bug in the MCA bus matching algorithm in that it promotes from signed short to int before comparing with the actual id and does sign extension on anything > 0x7fff (which means that pos ids > 0x7fff never get correctly matched). Signed-off-by:
-
Fernando Luis Vazquez Cao authored
Always ask the hardware to determine the hardware processor id in both UP and SMP kernels. Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
hard_smp_processor_id used to be just a macro that hard-coded hard_smp_processor_id to 0 in the non SMP case. When booting non SMP kernels on hardware where the boot ioapic id is not 0 this turns out to be a problem. This is happens frequently in the case of kdump and once in a great while in the case of real hardware. Use the APIC to determine the hardware processor id in both UP and SMP kernels to fix this issue. Notice that hard_smp_processor_id is only used by SMP code or by code that works with apics so we do not need to handle the case when apics are not present and hard_smp_processor_id should never be called there. Signed-off-by:
Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
hard_smp_processor_id used to be just a macro that hard-coded hard_smp_processor_id to 0 in the non SMP case. When booting non SMP kernels on hardware where the boot ioapic id is not 0 this turns out to be a problem. This is happens frequently in the case of kdump and once in a great while in the case of real hardware. Use the APIC to determine the hardware processor id in both UP and SMP kernels to fix this issue. Notice that hard_smp_processor_id is only used by SMP code or by code that works with apics so we do not need to handle the case when apics are not present and hard_smp_processor_id should never be called there. Signed-off-by:
-
Fernando Luis Vazquez Cao authored
With the advent of kdump, the assumption that the boot CPU when booting an UP kernel is always the CPU with a particular hardware ID (often 0) (usually referred to as BSP on some architectures) is not valid anymore. The reason being that the dump capture kernel boots on the crashed CPU (the CPU that invoked crash_kexec), which may be or may not be that particular CPU. Move definition of hard_smp_processor_id for the UP case to architecture-specific code ("asm/smp.h") where it belongs, so that each architecture can provide its own implementation. Signed-off-by: -
Dave Gilbert authored
Display all possible partitions when the root filesystem is not mounted. This helps to track spell'o's and missing drivers. Updated to work with newer kernels. Example output: VFS: Cannot open root device "foobar" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: 0800 8388608 sda driver: sd 0801 192748 sda1 0802 8193150 sda2 0810 4194304 sdb driver: sd Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [akpm@linux-foundation.org: cleanups, fix printk warnings] Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Cc: Dave Gilbert <linux@treblig.org> Signed-off-by:
-
Miklos Szeredi authored
These haven't been fixed for ages. Just make comments out of them. arch/um/kernel/skas/process.c:181:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:187:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:194:2: warning: #warning need to loop over +userspace_pids in kill_off_processes_skas Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
A linuxdoc comment had fallen out of date - it refers to an argument which no longer exists. Signed-off-by:
-
Jeff Dike authored
Mark another function as tt-mode only. Signed-off-by:
-
Peter Zijlstra authored
Enable (i)SCSI on UML, dunno why SCSI was deemed broken, it works like a charm. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Jeff Dike authored
UML now needs required-features.h to build - an empty one suffices. Signed-off-by:
-
Rafael J. Wysocki authored
[ With Johannes Berg <johannes@sipsolutions.net> ] Separate the hibernation (aka suspend to disk code) from the other suspend code. In particular: * Remove the definitions related to hibernation from include/linux/pm.h * Introduce struct hibernation_ops and a new hibernate() function to hibernate the system, defined in include/linux/suspend.h * Separate suspend code in kernel/power/main.c from hibernation-related code in kernel/power/disk.c and kernel/power/user.c (with the help of hibernation_ops) * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Signed-off-by:
-
Andrew Morton authored
Remove an inexplicable / Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Ken Chen authored
The internal hugetlb resv_huge_pages variable can permanently leak nonzero value in the error path of hugetlb page fault handler when hugetlb page is used in combination of cpuset. The leaked count can permanently trap N number of hugetlb pages in unusable "reserved" state. Steps to reproduce the bug: (1) create two cpuset, user1 and user2 (2) reserve 50 htlb pages in cpuset user1 (3) attempt to shmget/shmat 50 htlb page inside cpuset user2 (4) kernel oom the user process in step 3 (5) ipcrm the shm segment At this point resv_huge_pages will have a count of 49, even though there are no active hugetlbfs file nor hugetlb shared memory segment in the system. The leak is permanent and there is no recovery method other than system reboot. The leaked count will hold up all future use of that many htlb pages in all cpusets. The culprit is that the error path of alloc_huge_page() did not properly undo the change it made to resv_huge_page, causing inconsistent state. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
Jonathan Brassow authored
This patch removes the possibility of having uninitialized log state if the log device has failed. When a mirror resumes operation, it calls 'resume' on the logging module. If disk based logging is being used, the log device is read to fill in the log state. If the log device has failed, we cannot simply return, because this would leave the in-memory log state uninitialized. Instead, we assume all regions are out-of-sync and reset the log state. Failure to do this could result in the logging code reporting a region as in-sync, even though it isn't; which could result in a corrupted mirror. Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Jonathan Brassow authored
The call to rh_in_sync() in do_reads() should be allowed to block. It is in the mirror worker thread which already permits blocking operations. This will be needed to support clustered mirroring which will perform network operations. Signed-off-by:
-
Jonathan Brassow authored
With the code as it is, it is possible for oustanding clear region requests never to get flushed when a mirror is deactivated or suspended. This means there will always be some resync work required when a mirror is activated, even though it may very well be in-sync. Always requesting the flush doesn't hurt us. This is because the log tracks whether any changes occurred and, if not, no flush is performed. Signed-off-by:
-
Heinz Mauelshagen authored
New device-mapper target that can delay I/O (for testing). Reads can be separated from writes, redirected to different underlying devices and delayed by differing amounts of time. Signed-off-by:
Heinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Heinz Mauelshagen authored
More bio_list helper functions for new targets (including dm-delay and dm-loop) to manipulate lists of bios. Signed-off-by:
Heinz Mauelshagen <hjm@redhat.com> Signed-off-by:
Bryn Reeves <breeves@redhat.com> Signed-off-by:
-
Milan Broz authored
Remove old dm-io interface. Signed-off-by:
-
Milan Broz authored
This patch ports dm-raid1.c to the new dm-io interface. Signed-off-by:
-
Heinz Mauelshagen authored
This patch ports dm-log.c to the new dm-io interface in order to make it scalable to have a large number of persistent dirty logs active in parallel. Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Cc: Milan Broz <mbroz@redhat.com> Signed-off-by:
-
