- 10 Jun, 2013 19 commits
-
-
Andrzej Pietrasiewicz authored
There are no old function interface users left, so the old interface can be removed. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
preparation to use configfs-based approach on g_nokia.ko Signed-off-by:
-
Andrzej Pietrasiewicz authored
use the new usb_gstrings_attach interface Signed-off-by:
-
Andrzej Pietrasiewicz authored
f_ecm learns about our new configfs-based binding. Signed-off-by:
-
Andrzej Pietrasiewicz authored
use the new usb_gstrings_attach interface. Signed-off-by:
-
Andrzej Pietrasiewicz authored
f_ecm has been converted to new configfs infrastructure, fixing cdc2 gadget driver. [ balbi@ti.com : fixed a bunch of errors when adding ECM function ] Signed-off-by:
-
Andrzej Pietrasiewicz authored
Converting ecm to the new function interface requires converting the USB ecm's function code and its users. This patch converts the f_ecm.c to the new function interface. The file is now compiled into a separate usb_f_ecm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
All USB Ethernet functions will have very similar attributes in configfs. This patch provides helper definitions to ease writing the functions and reduce source code duplication. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add configfs support to the NCM function driver so that we can, eventually, get rid of kernel-based gadget drivers. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Trivial patch making use of the new usb_gstrings_attach interface. Signed-off-by:
-
Andrzej Pietrasiewicz authored
There are no old function interface users left, so the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Utilize our new configfs-based interface. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Converting ncm to the new function interface requires converting the USB ncm's function code and its users. This patch converts the f_ncm.c to the new function interface. The file is now compiled into a separate usb_f_ncm.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add an interface to create a struct netdev_dev filled with default values, an interface which makes it an interface to fill the struct with useful values and an interface to read the values set. The patch also adds an interface to register the net device associated with an ethernet-over-usb link. Signed-off-by:
-
Andrzej Pietrasiewicz authored
In order to convert to configfs the usb functions need to be converted to a new interface and compiled as modules. This patch creates an rndis module which will be used by the new functions. After all users of f_rndis are converted to the new interface, this module can be merged with f_rndis module. Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
u_ether.c has been #include'd by all gadgets which implement USB Ethernet functions. In order to add configfs support, the f_ecm.c, f_eem.c, f_ncm.c, f_subset.c, f_rndis.c need to be converted into modules and must not be #include'd. Consequently, the u_ether.c needs to be a module too, in a manner similar to u_serial.c. The resulting module should not take any parameters, so they are pushed to the current users of it, that is ether.c, g_ffs.c, multi.c, ncm.c, nokia.c. Signed-off-by:
-
UCHINO Satoshi authored
Without this memory barrier, the file-storage thread may fail to escape from the following while loop, because it may observe new common->thread_wakeup_needed and old bh->state which are updated by the callback functions. /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { rc = sleep_thread(common); if (rc) return rc; } Cc: stable@vger.kernel.org Signed-off-by:UCHINO Satoshi <satoshi.uchino@toshiba.co.jp> Acked-by:
-
Jassi Brar authored
prm_to_uac2() is broken because it tests against pointer it itself mapped onto, which will never be different. Fix the mapping by adding pointer to parent chip in each rtd param and removing the prm_to_uac2(). Reported-by:
Julien Rouviere <jrouviere@qualistream.com> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Alexey Khoroshilov authored
r8a66597_irq() processes sudmac part (r8a66597_sudmac_irq()) before locking r8a66597->lock. But transfer_complete(), that is called inside (r8a66597_sudmac_irq()->sudmac_finish()->transfer_complete()), expects r8a66597->lock is locked. As a result unheld spinlock can be unlocked. The patch just moves locking before calling r8a66597_sudmac_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
- 04 Jun, 2013 1 commit
-
-
Michael Grzeschik authored
Those optional operations are used to release and reacquire the queue lock when videobuf2 needs to perform operations that sleep for a long time, such as waiting for a buffer to be complete. Implement them to avoid blocking qbuf or streamoff calls when a dqbuf is in progress. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
- 31 May, 2013 2 commits
-
-
Ruchika Kharwar authored
Addition of the M and N recommended values for the USB3 PHY DPLL. Sysclk for DRA7xx is 20MHz. This yields: Clk = 20MHz * M/(N+1) = 20MHz * 1000 /(7+1) = 2.5 Ghz Signed-off-by:
Ruchika Kharwar <ruchika@ti.com> Signed-off-by:
-
Yijing Wang authored
Pci_enable_device() will set device power state to D0, so it's no need to do it again in dwc3_pci_probe(). Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
- 30 May, 2013 1 commit
-
-
Felipe Balbi authored
very minor patch fixing the following build warning on a debug message: drivers/usb/musb/musb_host.c: In function ‘musb_host_rx’: drivers/usb/musb/musb_host.c:1763:4: warning: format ‘%x’ \ expects argument of type ‘unsigned int’, but argument \ 6 has type ‘dma_addr_t’ [-Wformat] Signed-off-by:
-
- 29 May, 2013 6 commits
-
-
Venu Byravarasu authored
Registered Tegra USB PHY as a separate platform driver. To synchronize host controller and PHY initialization, used deferred probe mechanism. As PHY should be initialized before EHCI starts running, deferred probe of Tegra EHCI driver till PHY probe gets completed. Got rid of instance number based handling in host driver. Made use of DT params to get the PHY Pad registers. Signed-off-by:
Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by:
-
Venu Byravarasu authored
Check return values from all GPIO APIs and handle errors accordingly. Remove the call to clk_disable_unprepare(); this function does not prepare or enable the clock, so the error path should not disable or unprepare it. Signed-off-by:
-
Venu Byravarasu authored
As GPIO information is avail through DT, used it to get Tegra ULPI reset GPIO number. Added a new member to tegra_usb_phy structure to store this number. Signed-off-by:
-
Venu Byravarasu authored
Added a new PHY mode to support OTG. Obtained Tegra USB PHY mode using DT property. Signed-off-by:
-
Venu Byravarasu authored
In case if clk_get_sys fails, return correct error value provided by the API. Signed-off-by:
-
Felipe Balbi authored
ARM: tegra: DT-related fixes needed by the USB tree The Tegra USB bindings were in bad shape. The patches in this branch fix the binding definitions, and make all the necessary additions to the DT files. Stale nodes/properties will be removed early in 3.12 once the USB driver has been updated for the new binding. These changes are needed in both the USB tree, to allow the driver to be updated to handle them, and the Tegra tree, so that various tree- wide DT changes (e.g. conversion of IRQ/GPIO/clock constants to defines) can be applied on top of them. * tag 'tegra-for-3.11-deps-for-usb': ARM: tegra: update device trees for USB binding rework ARM: tegra: modify ULPI reset GPIO properties ARM: tegra: finalize USB EHCI and PHY bindings Signed-of-by:
-
- 28 May, 2013 11 commits
-
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by:Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Dongjin Kim authored
This patch adds to enable High Speed Inter Chip on Exynos4X12. Both channels are controlled by usbphy driver based on the patch series of usbphy driver submitted by Tomasz Figa. [1] https://patchwork.kernel.org/patch/2576121 [2] https://patchwork.kernel.org/patch/2576131 [3] https://patchwork.kernel.org/patch/2576141 [4] https://patchwork.kernel.org/patch/2576151 [5] https://patchwork.kernel.org/patch/2576161 [6] https://patchwork.kernel.org/patch/2576171Signed-off-by:
Dongjin Kim <tobetter@gmail.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sachin Kamat authored
'nop_xceiv_dt_ids' is always compiled in. Hence use of of_match_ptr is unnecessary. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Tomasz Figa authored
This patch adds driver data for Exynos 4x12 USB 2.0 PHY. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Tomasz Figa authored
To remove unnecessary if statements, this patch introduces phy_enable and phy_disable callbacks in driver data structure that implement SoC-specific PHY initialization and deinitialization. Signed-off-by:
-
Tomasz Figa authored
This patch extends driver data structure with set_isolation callback, which allows to remove the need for checking for SoC type in a switch statement. Signed-off-by:
-
Tomasz Figa authored
This patch cleans up handling of reference clock rate in Samsung USB PHY drivers. It is mostly a cosmetic change but improves error handling in case of failing to get reference clock or invalid clock rate. Signed-off-by:
-
Tomasz Figa authored
There is no need to use devm_clk_get to get a clock that is being put at the end of the function. This patch changes the code getting reference clock to use clk_get instead of useless in this case devm_clk_get. Signed-off-by:
-
Tomasz Figa authored
Since phy-samsung-usb library can be used only by phy-samsung-usb2 and phy-samsung-usb3 drivers, there is no need to give explicit control over its Kconfig symbol. This patch makes CONFIG_SAMSUNG_USBPHY symbol hidden and selected implicitly by CONFIG_SAMSUNG_USB2PHY and CONFIG_SAMSUNG_USB3PHY. Signed-off-by:
-
