- 14 May, 2019 40 commits
-
-
Jérôme Glisse authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit a3761c3c upstream. When bio_add_pc_page() fails in bio_copy_user_iov() we should free the page we just allocated otherwise we are leaking it. Cc: linux-block@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
S.j. Wang authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 0ff4e8c6 upstream. There is very low possibility ( < 0.1% ) that channel swap happened in beginning when multi output/input pin is enabled. The issue is that hardware can't send data to correct pin in the beginning with the normal enable flow. This is hardware issue, but there is no errata, the workaround flow is that: Each time playback/recording, firstly clear the xSMA/xSMB, then enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled before xSMA). Which is to use the xSMA as the trigger start register, previously the xCR_TE or xCR_RE is the bit for starting. Fixes commit 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Cc: <stable@vger.kernel.org> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 6147e136 upstream. clang points out with hundreds of warnings that the bitrev macros have a problem with constant input: drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] u8 crc = bitrev8(data->val_status & 0x0F); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8' __constant_bitrev8(__x) : \ ~~~~~~~~~~~~~~~~~~~^~~~ include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8' u8 __x = x; \ ~~~ ^ Both the bitrev and the __constant_bitrev macros use an internal variable named __x, which goes horribly wrong when passing one to the other. The obvious fix is to rename one of the variables, so this adds an extra '_'. It seems we got away with this because - there are only a few drivers using bitrev macros - usually there are no constant arguments to those - when they are constant, they tend to be either 0 or (unsigned)-1 (drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and give the correct result by pure chance. In fact, the only driver that I could find that gets different results with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver for fairly rare hardware (adding the maintainer to Cc for testing). Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de Fixes: 556d2f05 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Cc: Yalin Wang <yalin.wang@sonymobile.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Zubin Mithra authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 212ac181 upstream. When ioctl calls are made with non-null-terminated userspace strings, strlcpy causes an OOB-read from within strlen. Fix by changing to use strscpy instead. Signed-off-by:
Zubin Mithra <zsm@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sheena Mira-ato authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit b2e54b09 ] The device type for ip6 tunnels is set to ARPHRD_TUNNEL6. However, the ip4ip6_err function is expecting the device type of the tunnel to be ARPHRD_TUNNEL. Since the device types do not match, the function exits and the ICMP error packet is not sent to the originating host. Note that the device type for IPv4 tunnels is set to ARPHRD_TUNNEL. Fix is to expect a tunnel device type of ARPHRD_TUNNEL6 instead. Now the tunnel device type matches and the ICMP error packet is sent to the originating host. Signed-off-by:
Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Li RongQing authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 3d883026 ] NULL or ZERO_SIZE_PTR will be returned for zero sized memory request, and derefencing them will lead to a segfault so it is unnecessory to call vzalloc for zero sized memory request and not call functions which maybe derefence the NULL allocated memory this also fixes a possible memory leak if phy_ethtool_get_stats returns error, memory should be freed before exit Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Wang Li <wangli39@baidu.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 355b9855 ] net_hash_mix() currently uses kernel address of a struct net, and is used in many places that could be used to reveal this address to a patient attacker, thus defeating KASLR, for the typical case (initial net namespace, &init_net is not dynamically allocated) I believe the original implementation tried to avoid spending too many cycles in this function, but security comes first. Also provide entropy regardless of CONFIG_NET_NS. Fixes: 0b441916 ("netns: introduce the net_hash_mix "salt" for hashes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Amit Klein <aksecurity@gmail.com> Reported-by:
Benny Pinkas <benny@pinkas.net> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Koen De Schepper authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit aecfde23 ] RFC8257 §3.5 explicitly states that "A DCTCP sender MUST react to loss episodes in the same way as conventional TCP". Currently, Linux DCTCP performs no cwnd reduction when losses are encountered. Optionally, the dctcp_clamp_alpha_on_loss resets alpha to its maximal value if a RTO happens. This behavior is sub-optimal for at least two reasons: i) it ignores losses triggering fast retransmissions; and ii) it causes unnecessary large cwnd reduction in the future if the loss was isolated as it resets the historical term of DCTCP's alpha EWMA to its maximal value (i.e., denoting a total congestion). The second reason has an especially noticeable effect when using DCTCP in high BDP environments, where alpha normally stays at low values. This patch replace the clamping of alpha by setting ssthresh to half of cwnd for both fast retransmissions and RTOs, at most once per RTT. Consequently, the dctcp_clamp_alpha_on_loss module parameter has been removed. The table below shows experimental results where we measured the drop probability of a PIE AQM (not applying ECN marks) at a bottleneck in the presence of a single TCP flow with either the alpha-clamping option enabled or the cwnd halving proposed by this patch. Results using reno or cubic are given for comparison. | Link | RTT | Drop TCP CC | speed | base+AQM | probability ==================|=========|==========|============ CUBIC | 40Mbps | 7+20ms | 0.21% RENO | | | 0.19% DCTCP-CLAMP-ALPHA | | | 25.80% DCTCP-HALVE-CWND | | | 0.22% ------------------|---------|----------|------------ CUBIC | 100Mbps | 7+20ms | 0.03% RENO | | | 0.02% DCTCP-CLAMP-ALPHA | | | 23.30% DCTCP-HALVE-CWND | | | 0.04% ------------------|---------|----------|------------ CUBIC | 800Mbps | 1+1ms | 0.04% RENO | | | 0.05% DCTCP-CLAMP-ALPHA | | | 18.70% DCTCP-HALVE-CWND | | | 0.06% We see that, without halving its cwnd for all source of losses, DCTCP drives the AQM to large drop probabilities in order to keep the queue length under control (i.e., it repeatedly faces RTOs). Instead, if DCTCP reacts to all source of losses, it can then be controlled by the AQM using similar drop levels than cubic or reno. Signed-off-by:
Koen De Schepper <koen.de_schepper@nokia-bell-labs.com> Signed-off-by:
Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com> Cc: Bob Briscoe <research@bobbriscoe.net> Cc: Lawrence Brakmo <brakmo@fb.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <borkmann@iogearbox.net> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Andrew Shewmaker <agshew@gmail.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Acked-by:
Florian Westphal <fw@strlen.de> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 09279e61 ] Syzbot report a kernel-infoleak: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 Call Trace: _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline] sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562 ... Uninit was stored to memory at: sctp_transport_init net/sctp/transport.c:61 [inline] sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115 sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637 sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline] sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361 ... Bytes 8-15 of 16 are uninitialized It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in struct sockaddr_in) wasn't initialized, but directly copied to user memory in sctp_getsockopt_peer_addrs(). So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as sctp_v6_addr_to_user() does. Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Tested-by:
Alexander Potapenko <glider@google.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Bjørn Mork authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 6289d0fa ] This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Mao Wenan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit cb66ddd1 ] When it is to cleanup net namespace, rds_tcp_exit_net() will call rds_tcp_kill_sock(), if t_sock is NULL, it will not call rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect() and reference 'net' which has already been freed. In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before sock->ops->connect, but if connect() is failed, it will call rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always failed, rds_connect_worker() will try to reconnect all the time, so rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the connections. Therefore, the condition !tc->t_sock is not needed if it is going to do cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always NULL, and there is on other path to cancel cp_conn_w and free connection. So this patch is to fix this. rds_tcp_kill_sock(): ... if (net != c_net || !tc->t_sock) ... Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> ================================================================== BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721 CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11 Hardware name: linux,dummy-virt (DT) Workqueue: krdsd rds_connect_worker Call trace: dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x120/0x188 lib/dump_stack.c:113 print_address_description+0x68/0x278 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x21c/0x348 mm/kasan/report.c:409 __asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429 inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 __sock_create+0x4f8/0x770 net/socket.c:1276 sock_create_kern+0x50/0x68 net/socket.c:1322 rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114 rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 Allocated by task 687: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553 kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2705 [inline] slab_alloc mm/slub.c:2713 [inline] kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718 kmem_cache_zalloc include/linux/slab.h:697 [inline] net_alloc net/core/net_namespace.c:384 [inline] copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424 create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206 ksys_unshare+0x340/0x628 kernel/fork.c:2577 __do_sys_unshare kernel/fork.c:2645 [inline] __se_sys_unshare kernel/fork.c:2643 [inline] __arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960 Freed by task 264: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521 kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968 net_free net/core/net_namespace.c:400 [inline] net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407 net_drop_ns net/core/net_namespace.c:406 [inline] cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 The buggy address belongs to the object at ffff8003496a3f80 which belongs to the cache net_namespace of size 7872 The buggy address is located 1796 bytes inside of 7872-byte region [ffff8003496a3f80, ffff8003496a5e40) The buggy address belongs to the page: page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000 index:0x0 compound_mapcount: 0 flags: 0xffffe0000008100(slab|head) raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000 raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 467fa153("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit bb9bd814 ] ipip6 tunnels run iptunnel_pull_header on received skbs. This can determine the following use-after-free accessing iph pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) [ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit] [ 706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/= [ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016 [ 706.771839] Call trace: [ 706.801159] dump_backtrace+0x0/0x2f8 [ 706.845079] show_stack+0x24/0x30 [ 706.884833] dump_stack+0xe0/0x11c [ 706.925629] print_address_description+0x68/0x260 [ 706.982070] kasan_report+0x178/0x340 [ 707.025995] __asan_report_load1_noabort+0x30/0x40 [ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit] [ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 707.185940] ip_local_deliver_finish+0x3b8/0x988 [ 707.241338] ip_local_deliver+0x144/0x470 [ 707.289436] ip_rcv_finish+0x43c/0x14b0 [ 707.335447] ip_rcv+0x628/0x1138 [ 707.374151] __netif_receive_skb_core+0x1670/0x2600 [ 707.432680] __netif_receive_skb+0x28/0x190 [ 707.482859] process_backlog+0x1d0/0x610 [ 707.529913] net_rx_action+0x37c/0xf68 [ 707.574882] __do_softirq+0x288/0x1018 [ 707.619852] run_ksoftirqd+0x70/0xa8 [ 707.662734] smpboot_thread_fn+0x3a4/0x9e8 [ 707.711875] kthread+0x2c8/0x350 [ 707.750583] ret_from_fork+0x10/0x18 [ 707.811302] Allocated by task 16982: [ 707.854182] kasan_kmalloc.part.1+0x40/0x108 [ 707.905405] kasan_kmalloc+0xb4/0xc8 [ 707.948291] kasan_slab_alloc+0x14/0x20 [ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0 [ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0 [ 708.108280] __alloc_skb+0xd8/0x400 [ 708.150139] sk_stream_alloc_skb+0xa4/0x638 [ 708.200346] tcp_sendmsg_locked+0x818/0x2b90 [ 708.251581] tcp_sendmsg+0x40/0x60 [ 708.292376] inet_sendmsg+0xf0/0x520 [ 708.335259] sock_sendmsg+0xac/0xf8 [ 708.377096] sock_write_iter+0x1c0/0x2c0 [ 708.424154] new_sync_write+0x358/0x4a8 [ 708.470162] __vfs_write+0xc4/0xf8 [ 708.510950] vfs_write+0x12c/0x3d0 [ 708.551739] ksys_write+0xcc/0x178 [ 708.592533] __arm64_sys_write+0x70/0xa0 [ 708.639593] el0_svc_handler+0x13c/0x298 [ 708.686646] el0_svc+0x8/0xc [ 708.739019] Freed by task 17: [ 708.774597] __kasan_slab_free+0x114/0x228 [ 708.823736] kasan_slab_free+0x10/0x18 [ 708.868703] kfree+0x100/0x3d8 [ 708.905320] skb_free_head+0x7c/0x98 [ 708.948204] skb_release_data+0x320/0x490 [ 708.996301] pskb_expand_head+0x60c/0x970 [ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0 [ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit] [ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 709.200195] ip_local_deliver_finish+0x3b8/0x988 [ 709.255596] ip_local_deliver+0x144/0x470 [ 709.303692] ip_rcv_finish+0x43c/0x14b0 [ 709.349705] ip_rcv+0x628/0x1138 [ 709.388413] __netif_receive_skb_core+0x1670/0x2600 [ 709.446943] __netif_receive_skb+0x28/0x190 [ 709.497120] process_backlog+0x1d0/0x610 [ 709.544169] net_rx_action+0x37c/0xf68 [ 709.589131] __do_softirq+0x288/0x1018 [ 709.651938] The buggy address belongs to the object at ffffe01b6bd85580 which belongs to the cache kmalloc-1024 of size 1024 [ 709.804356] The buggy address is located 117 bytes inside of 1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980) [ 709.946340] The buggy address belongs to the page: [ 710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0 [ 710.099914] flags: 0xfffff8000000100(slab) [ 710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600 [ 710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000 [ 710.334966] page dumped because: kasan: bad access detected Fix it resetting iph pointer after iptunnel_pull_header Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Tested-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Junwei Hu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit ef0efcd3 ] At the beginning of ip6_fragment func, the prevhdr pointer is obtained in the ip6_find_1stfragopt func. However, all the pointers pointing into skb header may change when calling skb_checksum_help func with skb->ip_summed = CHECKSUM_PARTIAL condition. The prevhdr pointe will be dangling if it is not reloaded after calling __skb_linearize func in skb_checksum_help func. Here, I add a variable, nexthdr_offset, to evaluate the offset, which does not changes even after calling __skb_linearize func. Fixes: 405c92f7 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment") Signed-off-by:
Junwei Hu <hujunwei4@huawei.com> Reported-by:
Wenhao Zhang <zhangwenhao8@huawei.com> Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 7c0cca7c upstream. By default, the kernel will automatically load the module of any line dicipline that is asked for. As this sometimes isn't the safest thing to do, provide a sysctl to disable this feature. By default, we set this to 'y' as that is the historical way that Linux has worked, and we do not want to break working systems. But in the future, perhaps this can default to 'n' to prevent this functionality. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1828420 Upstream commit 7c0cca7c ("tty: ldisc: add sysctl to prevent autoloading of ldiscs") backport applied as part of upstream stable update to Linux 4.4.179 adds a new config option LDISC_AUTOLOAD which default value is "y". Update the Ubuntu configs accordingly. Signed-off-by:
-
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1828420 Upstream commit c7084edc ("tty: mark Siemens R3964 line discipline as BROKEN") backport applied as part of upstream stable update to Linux 4.4.179 disables the n_r3964 module. Update the Ubuntu configs to remove the broken module. Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit c7084edc upstream. The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1828420 Upstream commit c7084edc ("tty: mark Siemens R3964 line discipline as BROKEN") backport applied as part of upstream stable update to Linux 4.4.179 disables the n_r3964 module. Remove it from the list of modules built from the last ABI files. Ignore: yes Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 5f074f3e ] A recent optimization in Clang (r355672) lowers comparisons of the return value of memcmp against zero to comparisons of the return value of bcmp against zero. This helps some platforms that implement bcmp more efficiently than memcmp. glibc simply aliases bcmp to memcmp, but an optimized implementation is in the works. This results in linkage failures for all targets with Clang due to the undefined symbol. For now, just implement bcmp as a tailcail to memcmp to unbreak the build. This routine can be further optimized in the future. Other ideas discussed: * A weak alias was discussed, but breaks for architectures that define their own implementations of memcmp since aliases to declarations are not permitted (only definitions). Arch-specific memcmp implementations typically declare memcmp in C headers, but implement them in assembly. * -ffreestanding also is used sporadically throughout the kernel. * -fno-builtin-bcmp doesn't work when doing LTO. Link: https://bugs.llvm.org/show_bug.cgi?id=41035 Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13 Link: https://github.com/ClangBuiltLinux/linux/issues/416 Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.comSigned-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reported-by:
Adhemerval Zanella <adhemerval.zanella@linaro.org> Suggested-by:
James Y Knight <jyknight@google.com> Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ac3e233d upstream. GNU linker's -z common-page-size's default value is based on the target architecture. arch/x86/entry/vdso/Makefile sets it to the architecture default, which is implicit and redundant. Drop it. Fixes: 2aae950b ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Reported-by:
Dmitry Golovin <dima@golovin.in> Reported-by:
Bill Wendling <morbo@google.com> Suggested-by:
Rui Ueyama <ruiu@google.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Fangrui Song <maskray@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=38774 Link: https://github.com/ClangBuiltLinux/linux/issues/31Signed-off-by:
-
Alistair Strachan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 379d98dd upstream. The vdso{32,64}.so can fail to link with CC=clang when clang tries to find a suitable GCC toolchain to link these libraries with. /usr/bin/ld: arch/x86/entry/vdso/vclock_gettime.o: access beyond end of merged section (782) This happens because the host environment leaked into the cross compiler environment due to the way clang searches for suitable GCC toolchains. Clang is a retargetable compiler, and each invocation of it must provide --target=<something> --gcc-toolchain=<something> to allow it to find the correct binutils for cross compilation. These flags had been added to KBUILD_CFLAGS, but the vdso code uses CC and not KBUILD_CFLAGS (for various reasons) which breaks clang's ability to find the correct linker when cross compiling. Most of the time this goes unnoticed because the host linker is new enough to work anyway, or is incompatible and skipped, but this cannot be reliably assumed. This change alters the vdso makefile to just use LD directly, which bypasses clang and thus the searching problem. The makefile will just use ${CROSS_COMPILE}ld instead, which is always what we want. This matches the method used to link vmlinux. This drops references to DISABLE_LTO; this option doesn't seem to be set anywhere, and not knowing what its possible values are, it's not clear how to convert it from CC to LD flag. Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
George Rimar authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 927185c1 upstream. The kernel uses the OUTPUT_FORMAT linker script command in it's linker scripts. Most of the time, the -m option is passed to the linker with correct architecture, but sometimes (at least for x86_64) the -m option contradicts the OUTPUT_FORMAT directive. Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object files, but are linked with the -m elf_x86_64 linker flag when building for x86_64. The GNU linker manpage doesn't explicitly state any tie-breakers between -m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT overrides the emulation value specified with the -m option. LLVM lld has a different behavior, however. When supplied with contradicting -m and OUTPUT_FORMAT values it fails with the following error message: ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64 Therefore, just add the correct -m after the incorrect one (it overrides it), so the linker invocation looks like this: ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \ realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf This is not a functional change for GNU ld, because (although not explicitly documented) OUTPUT_FORMAT overrides -m EMULATION. Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting it in QEMU. [ bp: massage and clarify text. ] Suggested-by:
George Rimar <grimar@accesssoftek.com> Signed-off-by:
Tri Vo <trong@android.com> Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ad15006c upstream. This causes an issue when trying to build with `make LD=ld.lld` if ld.lld and the rest of your cross tools aren't in the same directory (ex. /usr/local/bin) (as is the case for Android's build system), as the GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point where LLVM tools are, not GCC/binutils tools are located. Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by binutils for which LLVM does not provide a substitute for, such as elfedit. Fixes: 785f11aa ("kbuild: Add better clang cross build support") Link: https://github.com/ClangBuiltLinux/linux/issues/341Suggested-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 9f834ec1 upstream. We used to delay switching to the new credentials until after we had mapped the executable (and possible elf interpreter). That was kind of odd to begin with, since the new executable will actually then _run_ with the new creds, but whatever. The bigger problem was that we also want to make sure that we turn off prof events and tracing before we start mapping the new executable state. So while this is a cleanup, it's also a fix for a possible information leak. Reported-by:
Robert Święcki <robert@swiecki.net> Tested-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ville Syrjälä authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit c978ae9b ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent <brainn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Ben Dooks authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit e486df39 ] The dma_desc->bytes_transferred counter tracks the number of bytes moved by the DMA channel. This is then used to calculate the information passed back in the in the tegra_dma_tx_status callback, which is usually fine. When the DMA channel is configured as continous, then the bytes_transferred counter will increase over time and eventually overflow to become negative so the residue count will become invalid and the ALSA sound-dma code will report invalid hardware pointer values to the application. This results in some users becoming confused about the playout position and putting audio data in the wrong place. To fix this issue, always ensure the bytes_transferred field is modulo the size of the request. We only do this for the case of the cyclic transfer done ISR as anyone attempting to move 2GiB of DMA data in one transfer is unlikely. Note, we don't fix the issue that we should /never/ transfer a negative number of bytes so we could make those fields unsigned. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Rafael Ávila de Espíndola authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d071ae09 ] Accessing per-CPU variables is done by finding the offset of the variable in the per-CPU block and adding it to the address of the respective CPU's block. Section 3.10.8 of ld.bfd's documentation states: For expressions involving numbers, relative addresses and absolute addresses, ld follows these rules to evaluate terms: Other binary operations, that is, between two relative addresses not in the same section, or between a relative address and an absolute address, first convert any non-absolute term to an absolute address before applying the operator." Note that LLVM's linker does not adhere to the GNU ld's implementation and as such requires implicitly-absolute terms to be explicitly marked as absolute in the linker script. If not, it fails currently with: ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute Makefile:1040: recipe for target 'vmlinux' failed This is not a functional change for ld.bfd which converts the term to an absolute symbol anyways as specified above. Based on a previous submission by Tri Vo <trong@android.com>. Reported-by:
Rafael Ávila de Espíndola <rafael@espindo.la> [ Update commit message per Boris' and Michael's suggestions. ] Signed-off-by:
-
Zumeng Chen authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit ba2ffc96 ] Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed): unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [<abb582c6>] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff Signed-off-by:
Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Axel Lin authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit f01a7beb ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e ("regulator: act8865: Add act8600 support") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Pawe? Chmiel authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 49710c32 ] Previously when doing format enumeration, it was returning all formats supported by driver, even if they're not supported by hw. Add missing check for fmt_ver_flag, so it'll be fixed and only those supported by hw will be returned. Similar thing is already done in s5p_jpeg_find_format. It was found by using v4l2-compliance tool and checking result of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test and using v4l2-ctl to get list of all supported formats. Tested on s5pv210-galaxys (Samsung i9000 phone). Fixes: bb677f3a ("[media] Exynos4 JPEG codec v4l2 driver") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> [hverkuil-cisco@xs4all.nl: fix a few alignment issues] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 8e2f311a ] Following command: iptables -D FORWARD -m physdev ... causes connectivity loss in some setups. Reason is that iptables userspace will probe kernel for the module revision of the physdev patch, and physdev has an artificial dependency on br_netfilter (xt_physdev use makes no sense unless a br_netfilter module is loaded). This causes the "phydev" module to be loaded, which in turn enables the "call-iptables" infrastructure. bridged packets might then get dropped by the iptables ruleset. The better fix would be to change the "call-iptables" defaults to 0 and enforce explicit setting to 1, but that breaks backwards compatibility. This does the next best thing: add a request_module call to checkentry. This was a stray '-D ... -m physdev' won't activate br_netfilter anymore. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Anders Roxell authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 9227ab56 ] The warning got introduced by commit 930507c1 ("arm64: add basic Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning haven't been seen before since size_t was 'unsigned int' when built on arm32. ../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’: ../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) ^~ ../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’ (__typecheck(x, y) && __no_side_effects(x, y)) ^~~~~~~~~~~ ../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’ __builtin_choose_expr(__safe_cmp(x, y), \ ^~~~~~~~~~ ../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’ #define min(x, y) __careful_cmp(x, y, <) ^~~~~~~~~~~~~ ../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’ now = min(d->len, sg_dma_len(sg)); ^~~ Rework so that we use min_t and pass in the size_t that returns the minimum of two values, using the specified type. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Acked-by:
Olof Johansson <olof@lixom.net> Reviewed-by:
-
Buland Singh authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 24d48a61 ] Commit '3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes")' introduced a new kernel command line parameter hpet_mmap, that is required to expose the memory map of the HPET registers to user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is broken and never takes effect due to missing '=' character in the __setup() code of hpet_mmap_enable. Before this patch: dmesg output with the kernel command line parameter hpet_mmap=1 [ 0.204152] HPET mmap disabled dmesg output with the kernel command line parameter hpet_mmap=0 [ 0.204192] HPET mmap disabled After this patch: dmesg output with the kernel command line parameter hpet_mmap=1 [ 0.203945] HPET mmap enabled dmesg output with the kernel command line parameter hpet_mmap=0 [ 0.204652] HPET mmap disabled Fixes: 3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes") Signed-off-by:
Buland Singh <bsingh@redhat.com> Signed-off-by:
-
Timo Alho authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 51294bf6 ] On cases where device tree entries for fuse and clock provider are in different order, fuse driver needs to defer probing. This leads to freeing incorrect IO base address as the fuse->base variable gets overwritten once during first probe invocation. This leads to the following spew during boot: [ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94) [ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8 [ 3.082318] Modules linked in: [ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1 [ 3.082340] Hardware name: quill (DT) [ 3.082353] Workqueue: events deferred_probe_work_func [ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO) [ 3.082372] pc : __vunmap+0xcc/0xd8 [ 3.082379] lr : __vunmap+0xcc/0xd8 [ 3.082385] sp : ffff00000a1d3b60 [ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000 [ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610 [ 3.082413] x25: 0000000000000000 x24: 0000000000000009 [ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000 [ 3.082432] x21: 0000000000000000 x20: 0000000000000000 [ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff [ 3.082452] x17: 0000000000000000 x16: 0000000000000000 [ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720 [ 3.082471] x13: 0720072007200720 x12: 0720072907340739 [ 3.082481] x11: 0764076607380765 x10: 0766076307300730 [ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720 [ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102 [ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8 [ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000 [ 3.082538] Call trace: [ 3.082545] __vunmap+0xcc/0xd8 [ 3.082552] vunmap+0x24/0x30 [ 3.082561] __iounmap+0x2c/0x38 [ 3.082569] tegra_fuse_probe+0xc8/0x118 [ 3.082577] platform_drv_probe+0x50/0xa0 [ 3.082585] really_probe+0x1b0/0x288 [ 3.082593] driver_probe_device+0x58/0x100 [ 3.082601] __device_attach_driver+0x98/0xf0 [ 3.082609] bus_for_each_drv+0x64/0xc8 [ 3.082616] __device_attach+0xd8/0x130 [ 3.082624] device_initial_probe+0x10/0x18 [ 3.082631] bus_probe_device+0x90/0x98 [ 3.082638] deferred_probe_work_func+0x74/0xb0 [ 3.082649] process_one_work+0x1e0/0x318 [ 3.082656] worker_thread+0x228/0x450 [ 3.082664] kthread+0x128/0x130 [ 3.082672] ret_from_fork+0x10/0x18 [ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]--- Fix this by retaining the value of fuse->base until driver has successfully probed. Signed-off-by:
Timo Alho <talho@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
David Tolnay authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit aef027db ] The virtio-rng driver uses a completion called have_data to wait for a virtio read to be fulfilled by the hypervisor. The completion is reset before placing a buffer on the virtio queue and completed by the virtio callback once data has been written into the buffer. Prior to this commit, the driver called init_completion on this completion both during probe as well as when registering virtio buffers as part of a hwrng read operation. The second of these init_completion calls should instead be reinit_completion because the have_data completion has already been inited by probe. As described in Documentation/scheduler/completion.txt, "Calling init_completion() twice on the same completion object is most likely a bug". This bug was present in the initial implementation of virtio-rng in f7f510ec ("virtio: An entropy device, as suggested by hpa"). Back then the have_data completion was a single static completion rather than a member of one of potentially multiple virtrng_info structs as implemented later by 08e53fbd ("virtio-rng: support multiple virtio-rng devices"). The original driver incorrectly used init_completion rather than INIT_COMPLETION to reset have_data during read. Tested by running `head -c48 /dev/random | hexdump` within crosvm, the Chrome OS virtual machine monitor, and confirming that the virtio-rng driver successfully produces random bytes from the host. Signed-off-by:
David Tolnay <dtolnay@gmail.com> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Akinobu Mita authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 29856308 ] This driver sets initial frame width and height to 0x0, which is invalid. So set it to selection rectangle bounds instead. This is detected by v4l2-compliance detected. Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Manfred Schlaegl authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 7ab57b76 ] We increase the default limit for buffer memory allocation by a factor of 10 to 640K to prevent data loss when using fast serial interfaces. For example when using RS485 without flow-control at speeds of 1Mbit/s an upwards we've run into problems such as applications being too slow to read out this buffer (on embedded devices based on imx53 or imx6). If you want to write transmitted data to a slow SD card and thus have realtime requirements, this limit can become a problem. That shouldn't be the case and 640K buffers fix such problems for us. This value is a maximum limit for allocation only. It has no effect on systems that currently run fine. When transmission is slow enough applications and hardware can keep up and increasing this limit doesn't change anything. It only _allows_ to allocate more than 2*64K in cases we currently fail to allocate memory despite having some. Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 5388a5b8 ] machine_crash_nonpanic_core() does this: while (1) cpu_relax(); because the kernel has crashed, and we have no known safe way to deal with the CPU. So, we place the CPU into an infinite loop which we expect it to never exit - at least not until the system as a whole is reset by some method. In the absence of erratum 754327, this code assembles to: b . In other words, an infinite loop. When erratum 754327 is enabled, this becomes: 1: dmb b 1b It has been observed that on some systems (eg, OMAP4) where, if a crash is triggered, the system tries to kexec into the panic kernel, but fails after taking the secondary CPU down - placing it into one of these loops. This causes the system to livelock, and the most noticable effect is the system stops after issuing: Loading crashdump kernel... to the system console. The tested as working solution I came up with was to add wfe() to these infinite loops thusly: while (1) { cpu_relax(); wfe(); } which, without 754327 builds to: 1: wfe b 1b or with 754327 is enabled: 1: dmb wfe b 1b Adding "wfe" does two things depending on the environment we're running under: - where we're running on bare metal, and the processor implements "wfe", it stops us spinning endlessly in a loop where we're never going to do any useful work. - if we're running in a VM, it allows the CPU to be given back to the hypervisor and rescheduled for other purposes (maybe a different VM) rather than wasting CPU cycles inside a crashed VM. However, in light of erratum 794072, Will Deacon wanted to see 10 nops as well - which is reasonable to cover the case where we have erratum 754327 enabled _and_ we have a processor that doesn't implement the wfe hint. So, we now end up with: 1: wfe b 1b when erratum 754327 is disabled, or: 1: dmb nop nop nop nop nop nop nop nop nop nop wfe b 1b when erratum 754327 is enabled. We also get the dmb + 10 nop sequence elsewhere in the kernel, in terminating loops. This is reasonable - it means we get the workaround for erratum 794072 when erratum 754327 is enabled, but still relinquish the dead processor - either by placing it in a lower power mode when wfe is implemented as such or by returning it to the hypervisior, or in the case where wfe is a no-op, we use the workaround specified in erratum 794072 to avoid the problem. These as two entirely orthogonal problems - the 10 nops addresses erratum 794072, and the wfe is an optimisation that makes the system more efficient when crashed either in terms of power consumption or by allowing the host/other VMs to make use of the CPU. I don't see any reason not to use kexec() inside a VM - it has the potential to provide automated recovery from a failure of the VMs kernel with the opportunity for saving a crashdump of the failure. A panic() with a reboot timeout won't do that, and reading the libvirt documentation, setting on_reboot to "preserve" won't either (the documentation states "The preserve action for an on_reboot event is treated as a destroy".) Surely it has to be a good thing to avoiding having CPUs spinning inside a VM that is doing no useful work. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Stanislaw Gruszka authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 3bd1505f ] As reported by Michael eeprom 0d is supported and work with the driver. Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param with 0d EEPORM looks like this: RSSI offset: 0 0 Reference temp: f9 LNA gain: 8 Reg channels: 1-14 Per rate power: raw:05 bw20:05 bw40:05 raw:05 bw20:05 bw40:05 raw:03 bw20:03 bw40:03 raw:03 bw20:03 bw40:03 raw:04 bw20:04 bw40:04 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:02 bw20:02 bw40:02 raw:00 bw20:00 bw40:00 Per channel power: tx_power ch1:09 ch2:09 tx_power ch3:0a ch4:0a tx_power ch5:0a ch6:0a tx_power ch7:0b ch8:0b tx_power ch9:0b ch10:0b tx_power ch11:0b ch12:0b tx_power ch13:0b ch14:0b Reported-and-tested-by:
Michael <ZeroBeat@gmx.de> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Alexey Khoroshilov authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 8cd09a3d ] If of_platform_populate() fails in gsbi_probe(), gsbi->hclk is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
