- 09 Oct, 2018 10 commits
-
-
Bård Eirik Winther authored
Add 16-bit bayer formats to the test pattern generator, namely V4L2_PIX_FMT_SRGGB16 V4L2_PIX_FMT_SGRBG16 V4L2_PIX_FMT_SGBRG16 V4L2_PIX_FMT_SBGGR16 Signed-off-by:
Bård Eirik Winther <bwinther@cisco.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Dafna Hirschfeld authored
Replace calls to `printk` with the appropriate `pr_*` macro. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by:
-
Vikash Garodia authored
Existing code returns the max of the decoded size and buffer size. It turns out that buffer size is always greater due to hardware alignment requirement. As a result, payload size given to client is incorrect. This change ensures that the bytesused is assigned to actual payload size, when available. Signed-off-by:
Vikash Garodia <vgarodia@codeaurora.org> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Colin Ian King authored
Shifting the u8 value[3] by an int can lead to sign-extension overflow. For example, if value[3] is 0xff and the shift is 24 then it is promoted to int and then the top bit is sign-extended so that all upper 32 bits are set. Fix this by casting value[3] to a u32 before the shift. Detected by CoverityScan, CID#1016522 ("Unintended sign extension") Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Biju Das authored
Add compatible strings for r8a7744. No driver change is needed as "renesas,rcar-gen2-vin" will activate the right code.However, it is good practice to document compatible strings for the specific SoC as this allows SoC specific changes to the driver if needed, in addition to document SoC support and therefore allow checkpatch.pl to validate compatible string values. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Chris Paterson <Chris.Paterson2@renesas.com> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Wenwen Wang authored
In isif_probe(), there is a while loop to get the ISIF base address and linearization table0 and table1 address. In the loop body, the function platform_get_resource() is called to get the resource. If platform_get_resource() returns NULL, the loop is terminated and the execution goes to 'fail_nobase_res'. Suppose the loop is terminated at the first iteration because platform_get_resource() returns NULL and the execution goes to 'fail_nobase_res'. Given that there is another while loop at 'fail_nobase_res' and i equals to 0, one iteration of the second while loop will be executed. However, the second while loop does not check the return value of platform_get_resource(). This can cause a NULL pointer dereference bug if the return value is a NULL pointer. This patch avoids the above issue by adding a check in the second while loop after the call to platform_get_resource(). Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
-
Colin Ian King authored
The const array config_ids can be made static, saves populating it on the stack and will make it read-only. Signed-off-by:
-
Colin Ian King authored
The const array addr_list can be made static, saves populating it on the stack and will make it read-only. Signed-off-by:
-
Colin Ian King authored
The const array addr_list can be made static, saves populating it on the stack and will make it read-only. Signed-off-by:
-
Colin Ian King authored
The const array addr_list can be made static, saves populating it on the stack and will make it read-only. Signed-off-by:
-
- 08 Oct, 2018 4 commits
-
-
Nathan Chancellor authored
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/media/pci/cx18/cx18-driver.c:1255:23: warning: address of 'cx->streams[i].video_dev' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&cx->streams[i].video_dev) ~~ ~~~~~~~~~~~~~~~^~~~~~~~~ 1 warning generated. Check whether v4l2_dev is null, not the address, so that the statement doesn't fire all the time. This check has been present since 2009, introduced by commit 21a278b8 ("V4L/DVB (11619): cx18: Simplify the work handler for outgoing mailbox commands") Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Sakari Ailus authored
v4l2_async_unregister_subdev() may not be called without v4l2_async_register_subdev() being called first. Fix this. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
If probe fails, the kernel will print the error code. There's no need to driver to do that. Signed-off-by:
-
Rajmohan Mani authored
Fixed the case where v4l2_async_unregister_subdev() is called unnecessarily in the error handling path in probe function. Signed-off-by:
Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by:
-
- 05 Oct, 2018 25 commits
-
-
Sean Young authored
An RC device is does not need to be called 'RC for'. Simply the name will suffice. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
If a receive is in progress or starts before the transmit has a chance, then lower the Signal Free Time of the upcoming transmit to no more than CEC_SIGNAL_FREE_TIME_NEW_INITIATOR. This is per the specification requirements. Signed-off-by:
-
Hans Verkuil authored
The calculation of the Signal Free Time in the framework was not correct. If a message was received, then the next transmit should be considered a New Initiator and use a shorter SFT value. This was not done with the result that if both sides where continually sending messages, they both could use the same SFT value and one side could deny the other side access to the bus. Note that this fix does not take the corner case into account where a receive is in progress when you call adap_transmit. Signed-off-by:
-
Hans Verkuil authored
When there is no EDID the CEC adapter should be unconfigured as well. So call cec_phys_addr_invalidate() when this happens. Signed-off-by:
-
Hans Verkuil authored
When there is no EDID the CEC adapter should be unconfigured as well. So call cec_phys_addr_invalidate() when this happens. Signed-off-by:
-
Hans Verkuil authored
If the HDMI cable is disconnected or the CEC adapter is manually unconfigured, then all pending transmits and wait-for-replies are aborted. Signal this with new status bits (CEC_RX/TX_STATUS_ABORTED). If due to (usually) a driver bug a transmit never ends (i.e. the transmit_done was never called by the driver), then when this times out the message is marked with CEC_TX_STATUS_TIMEOUT. This should not happen and is an indication of a driver bug. Without a separate status bit for this it was impossible to detect this from userspace. The 'transmit timed out' kernel message is now a warning, so this should be more prominent in the kernel log as well. Signed-off-by:
-
Hans Verkuil authored
Clarify that calling cec_transmit_done can start a new transmit and that you should put the hardware in a state that allows for a new transmit before calling this function. Signed-off-by:
-
Mauro Carvalho Chehab authored
As pointed at: https://bugzilla.kernel.org/show_bug.cgi?id=199323 This patch causes a bad effect on RPi. I suspect that the root cause is at the USB out of tree RPi driver, with uses high priority interrupts instead of normal ones. Anyway, as this patch is mostly a cleanup, better to revert it. This reverts commit 7d95fb74. Cc: stable@vger.kernel.org # For Kernel 4.18 Signed-off-by:
-
Hugues Fruchet authored
Changing framerate right before streamon had no effect, the new framerate value was taken into account only at next streamon, fix this. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Lubomir Rintel authored
When the "xclk" clock was added, it was made mandatory. This broke the driver on an OLPC plaform which doesn't know such clock. Make it optional. Tested on a OLPC XO-1 laptop. Fixes: 0a024d63 ("[media] ov7670: get xclk") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Arnd Bergmann authored
The regmap change causes multiple warnings like drivers/media/i2c/ov9650.c: In function 'ov965x_g_volatile_ctrl': drivers/media/i2c/ov9650.c:889:29: error: 'reg2' may be used uninitialized in this function [-Werror=maybe-uninitialized] exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) | ~~~~~~~~~~~~~~~^~~~~~ It is apparently hard for the compiler to see here if ov965x_read() returned successfully or not. Besides, we have a v4l2_dbg() statement that prints an uninitialized value if regmap_read() fails. Adding an 'else' clause avoids the ambiguity. Fixes: 361f3803 ("media: ov9650: use SCCB regmap") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Function alignments are off by 1 space, as reported by checkpatch.pl --strict. Fix those. Acked-by:
-
Bingbu Cao authored
Add a v4l2 sub-device driver for the Sony imx355 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3268x2448, 3264x2448, 3280x2464 @ 30fps - 1940x1096, 1936x1096, 1924x1080, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1300x736, 1296x736, 1284x720, 1280x720 820x616 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Use do_div() for dividing 64-bit numbers, fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by:Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Function alignments are off by 1 space, as reported by checkpatch.pl --strict. Fix those. Acked-by:
-
Bingbu Cao authored
Add a v4l2 sub-device driver for the Sony imx319 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3264x2448, 3280x2464 @ 30fps - 1936x1096, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1296x736, 1280x720 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Replace 64-bit division by do_div(), fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: -
Sakari Ailus authored
Sometimes it may be necessary to grab a control while holding the control handler's lock. Provide an unlocked variant of v4l2_ctrl_grab for the purpose --- it's called __v4l2_ctrl_grab. Signed-off-by:
-
Sakari Ailus authored
v4l2_ctrl_grab() is documented in the header; there's no need to have a comment explaining what the function does in the .c file. Signed-off-by:
-
Sakari Ailus authored
The driver for the dw9807 voice coil was renamed as dw9807-vcm.c to reflect the fact that the chip also contains an EEPROM. While there is no EEPROM (nor MFD) driver yet and it may not be ever even needed, the driver was renamed accordingly. But the MAINTAINERS entry was not. Fix this. Fixes: e6c17ada ("media: dw9807-vcm: Recognise this is just the VCM bit of the device") Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Marek Szyprowski authored
Commits 03fbdb2f ("media: move videobuf2 to drivers/media/common") and 7952be9b ("media: drivers/media/common/videobuf2: rename from videobuf") moved videobuf2 framework source code finally to drivers/media/common/videobuf2 directory, so update relevant paths in MAINTAINERS file. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
-
Sean Young authored
There is no need to create another input device. Signed-off-by:
-
Sean Young authored
There is no need to create another input device. Signed-off-by:
-
Sean Young authored
libevdev (which is used by libinput) gets a list of keycodes from the input device on creation. Any events with keycodes which are not in this list are silently dropped. So, set all keycodes on device creation since we do not know which will be used if the keymap changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
The v4l2_fwnode_reference_parse_int_props() has a big name, causing it to cause coding style warnings. Also, it depends on a const struct embedded indide a function. Rearrange the logic in order to move the struct declaration out of such function and use it inside this function. That cleans up some coding style issues. Acked-by:
-
Mauro Carvalho Chehab authored
There is already a typedef for the parse endpoint function. However, instead of using it, it is redefined at the C file (and on one of the function headers). Replace them by the function typedef, in order to cleanup several related coding style warnings. Acked-by:
-
Mauro Carvalho Chehab authored
There are several coding style issues at those definitions, and the previous patchset added even more. Address the trivial ones by first calling: ./scripts/checkpatch.pl --strict --fix-inline include/media/v4l2-async.h include/media/v4l2-fwnode.h include/media/v4l2-mediabus.h drivers/media/v4l2-core/v4l2-async.c drivers/media/v4l2-core/v4l2-fwnode.c and then manually adjusting the style where needed. Acked-by:
-
- 04 Oct, 2018 1 commit
-
-
Jacopo Mondi authored
As the v4l2-fwnode now allows drivers to set defaults, and eventually override them by specifying properties in DTS, use defaults for the CEU driver. Also remove endpoint properties from the gr-peach-audiocamerashield as they match the defaults now specified in the driver code (h/vsync-active and bus-width) or are not relevant to the interface as they cannot be configured (pclk-sample). Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
