- 10 Oct, 2014 40 commits
-
-
Benjamin Tissoires authored
Commit "HID: logitech: perform bounds checking on device_id early enough" unfortunately leaks some errors to dmesg which are not real ones: - if the report is not a DJ one, then there is not point in checking the device_id - the receiver (index 0) can also receive some notifications which can be safely ignored given the current implementation Move out the test regarding the report_id and also discards printing errors when the receiver got notified. Fixes: ad3e14d7 Cc: stable@vger.kernel.org Reported-and-tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> (cherry picked from commit 5abfe85c) Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Mel Gorman authored
When kswapd is awake reclaiming, the per-cpu stat thresholds are lowered to get more accurate counts to avoid breaching watermarks. This threshold update iterates over all possible CPUs which is unnecessary. Only online CPUs need to be updated. If a new CPU is onlined, refresh_zone_stat_thresholds() will set the thresholds correctly. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit bb0b6dff) Signed-off-by:
-
Hugh Dickins authored
Use ACCESS_ONCE() in handle_pte_fault() when getting the entry or orig_pte upon which all subsequent decisions and pte_same() tests will be made. I have no evidence that its lack is responsible for the mm/filemap.c:202 BUG_ON(page_mapped(page)) in __delete_from_page_cache() found by trinity, and I am not optimistic that it will fix it. But I have found no other explanation, and ACCESS_ONCE() here will surely not hurt. If gcc does re-access the pte before passing it down, then that would be disastrous for correct page fault handling, and certainly could explain the page_mapped() BUGs seen (concurrent fault causing page to be mapped in a second time on top of itself: mapcount 2 for a single pte). Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by:
-
Hugh Dickins authored
Under shmem swapping load, I sometimes hit the VM_BUG_ON_PAGE(!PageLRU) in isolate_lru_pages() at mm/vmscan.c:1281! Commit 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") looks like interrupted work-in-progress. mm/filemap.c's call to init_page_accessed() is fine, but not mm/shmem.c's - shmem_write_begin() is clearly wrong to use it after shmem_getpage(), when the page is always visible in radix_tree, and often already on LRU. Revert change to shmem_write_begin(), and use init_page_accessed() or mark_page_accessed() appropriately for SGP_WRITE in shmem_getpage_gfp(). SGP_WRITE also covers shmem_symlink(), which did not mark_page_accessed() before; but since many other filesystems use [__]page_symlink(), which did and does mark the page accessed, consider this as rectifying an oversight. Signed-off-by:
-
Mel Gorman authored
If a page is marked for immediate reclaim then it is moved to the tail of the LRU list. This occurs when the system is under enough memory pressure for pages under writeback to reach the end of the LRU but we test for this using atomic operations on every writeback. This patch uses an optimistic non-atomic test first. It'll miss some pages in rare cases but the consequences are not severe enough to warrant such a penalty. While the function does not dominate profiles during a simple dd test the cost of it is reduced. 73048 0.7428 vmlinux-3.15.0-rc5-mmotm-20140513 end_page_writeback 23740 0.2409 vmlinux-3.15.0-rc5-lessatomic end_page_writeback Signed-off-by:
-
Mel Gorman authored
Discarding buffers uses a bunch of atomic operations when discarding buffers because ...... I can't think of a reason. Use a cmpxchg loop to clear all the necessary flags. In most (all?) cases this will be a single atomic operations. [akpm@linux-foundation.org: move BUFFER_FLAGS_DISCARD into the .c file] Signed-off-by:
-
Mel Gorman authored
shmem_getpage_gfp uses an atomic operation to set the SwapBacked field before it's even added to the LRU or visible. This is unnecessary as what could it possible race against? Use an unlocked variant. Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Mel Gorman authored
Currently it's calculated once per zone in the zonelist. Signed-off-by:
-
Mel Gorman authored
A node/zone index is used to check if pages are compatible for merging but this happens unconditionally even if the buddy page is not free. Defer the calculation as long as possible. Ideally we would check the zone boundary but nodes can overlap. Signed-off-by:
-
Mel Gorman authored
If a zone cannot be used for a dirty page then it gets marked "full" which is cached in the zlc and later potentially skipped by allocation requests that have nothing to do with dirty zones. Signed-off-by:
-
Mel Gorman authored
The zlc is used on NUMA machines to quickly skip over zones that are full. However it is always updated, even for the first zone scanned when the zlc might not even be active. As it's a write to a bitmap that potentially bounces cache line it's deceptively expensive and most machines will not care. Only update the zlc if it was active. Signed-off-by:
-
Shaohua Li authored
We use the accessed bit to age a page at page reclaim time, and currently we also flush the TLB when doing so. But in some workloads TLB flush overhead is very heavy. In my simple multithreaded app with a lot of swap to several pcie SSDs, removing the tlb flush gives about 20% ~ 30% swapout speedup. Fortunately just removing the TLB flush is a valid optimization: on x86 CPUs, clearing the accessed bit without a TLB flush doesn't cause data corruption. It could cause incorrect page aging and the (mistaken) reclaim of hot pages, but the chance of that should be relatively low. So as a performance optimization don't flush the TLB when clearing the accessed bit, it will eventually be flushed by a context switch or a VM operation anyway. [ In the rare event of it not getting flushed for a long time the delay shouldn't really matter because there's no real memory pressure for swapout to react to. ] Suggested-by:
Shaohua Li <shli@fusionio.com> Acked-by:
Ingo Molnar <mingo@kernel.org> (cherry picked from commit b13b1d2d) Signed-off-by:
-
David Rientjes authored
Async compaction terminates prematurely when need_resched(), see compact_checklock_irqsave(). This can never trigger, however, if the cond_resched() in isolate_migratepages_range() always takes care of the scheduling. If the cond_resched() actually triggers, then terminate this pageblock scan for async compaction as well. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Heesub Shin authored
Remove code lines currently not in use or never called. Signed-off-by:
Heesub Shin <heesub.shin@samsung.com> Acked-by:
-
Fabian Frederick authored
Commit f9acc8c7 ("readahead: sanify file_ra_state names") left ra_submit with a single function call. Move ra_submit to internal.h and inline it to save some stack. Thanks to Andrew Morton for commenting different versions. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Suggested-by:
-
Al Viro authored
... it does that itself (via kmap_atomic()) Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> (cherry picked from commit 9e8c2af9) Signed-off-by:
-
Sasha Levin authored
This patch removes read_cache_page_async() which wasn't really needed anywhere and simplifies the code around it a bit. read_cache_page_async() is useful when we want to read a page into the cache without waiting for it to complete. This happens when the appropriate callback 'filler' doesn't complete its read operation and releases the page lock immediately, and instead queues a different completion routine to do that. This never actually happened anywhere in the code. read_cache_page_async() had 3 different callers: - read_cache_page() which is the sync version, it would just wait for the requested read to complete using wait_on_page_read(). - JFFS2 would call it from jffs2_gc_fetch_page(), but the filler function it supplied doesn't do any async reads, and would complete before the filler function returns - making it actually a sync read. - CRAMFS would call it using the read_mapping_page_async() wrapper, with a similar story to JFFS2 - the filler function doesn't do anything that reminds async reads and would always complete before the filler function returns. To sum it up, the code in mm/filemap.c never took advantage of having read_cache_page_async(). While there are filler callbacks that do async reads (such as the block one), we always called it with the read_cache_page(). This patch adds a mandatory wait for read to complete when adding a new page to the cache, and removes read_cache_page_async() and its wrappers. Signed-off-by:
-
Johannes Weiner authored
The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by:
Minchan Kim <minchan@kernel.org> Acked-by:
-
Johannes Weiner authored
Page cache radix tree slots are usually stabilized by the page lock, but shmem's swap cookies have no such thing. Because the overall truncation loop is lockless, the swap entry is currently confirmed by a tree lookup and then deleted by another tree lookup under the same tree lock region. Use radix_tree_delete_item() instead, which does the verification and deletion with only one lookup. This also allows removing the delete-only special case from shmem_radix_tree_replace(). Signed-off-by:
-
Johannes Weiner authored
Provide a function that does not just delete an entry at a given index, but also allows passing in an expected item. Delete only if that item is still located at the specified index. This is handy when lockless tree traversals want to delete entries as well because they don't have to do an second, locked lookup to verify the slot has not changed under them before deleting the entry. Signed-off-by:
-
David Rientjes authored
The conditions that control the isolation mode in isolate_migratepages_range() do not change during the iteration, so extract them out and only define the value once. This actually does have an effect, gcc doesn't optimize it itself because of cc->sync. Signed-off-by:
-
Yasuaki Ishimatsu authored
Yasuaki Ishimatsu reported memory hot-add spent more than 5 _hours_ on 9TB memory machine since onlining memory sections is too slow. And we found out setup_zone_migrate_reserve spent >90% of the time. The problem is, setup_zone_migrate_reserve scans all pageblocks unconditionally, but it is only necessary if the number of reserved block was reduced (i.e. memory hot remove). Moreover, maximum MIGRATE_RESERVE per zone is currently 2. It means that the number of reserved pageblocks is almost always unchanged. This patch adds zone->nr_migrate_reserve_block to maintain the number of MIGRATE_RESERVE pageblocks and it reduces the overhead of setup_zone_migrate_reserve dramatically. The following table shows time of onlining a memory section. Amount of memory | 128GB | 192GB | 256GB| --------------------------------------------- linux-3.12 | 23.9 | 31.4 | 44.5 | This patch | 8.3 | 8.3 | 8.6 | Mel's proposal patch | 10.9 | 19.2 | 31.3 | --------------------------------------------- (millisecond) 128GB : 4 nodes and each node has 32GB of memory 192GB : 6 nodes and each node has 32GB of memory 256GB : 8 nodes and each node has 32GB of memory (*1) Mel proposed his idea by the following threads. https://lkml.org/lkml/2013/10/30/272 [akpm@linux-foundation.org: tweak comment] Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reported-by:
-
Vlastimil Babka authored
Compaction used to start its migrate and free page scaners at the zone's lowest and highest pfn, respectively. Later, caching was introduced to remember the scanners' progress across compaction attempts so that pageblocks are not re-scanned uselessly. Additionally, pageblocks where isolation failed are marked to be quickly skipped when encountered again in future compactions. Currently, both the reset of cached pfn's and clearing of the pageblock skip information for a zone is done in __reset_isolation_suitable(). This function gets called when: - compaction is restarting after being deferred - compact_blockskip_flush flag is set in compact_finished() when the scanners meet (and not again cleared when direct compaction succeeds in allocation) and kswapd acts upon this flag before going to sleep This behavior is suboptimal for several reasons: - when direct sync compaction is called after async compaction fails (in the allocation slowpath), it will effectively do nothing, unless kswapd happens to process the compact_blockskip_flush flag meanwhile. This is racy and goes against the purpose of sync compaction to more thoroughly retry the compaction of a zone where async compaction has failed. The restart-after-deferring path cannot help here as deferring happens only after the sync compaction fails. It is also done only for the preferred zone, while the compaction might be done for a fallback zone. - the mechanism of marking pageblock to be skipped has little value since the cached pfn's are reset only together with the pageblock skip flags. This effectively limits pageblock skip usage to parallel compactions. This patch changes compact_finished() so that cached pfn's are reset immediately when the scanners meet. Clearing pageblock skip flags is unchanged, as well as the other situations where cached pfn's are reset. This allows the sync-after-async compaction to retry pageblocks not marked as skipped, such as blocks !MIGRATE_MOVABLE blocks that async compactions now skips without marking them. Signed-off-by:
-
Vlastimil Babka authored
Compaction temporarily marks pageblocks where it fails to isolate pages as to-be-skipped in further compactions, in order to improve efficiency. One of the reasons to fail isolating pages is that isolation is not attempted in pageblocks that are not of MIGRATE_MOVABLE (or CMA) type. The problem is that blocks skipped due to not being MIGRATE_MOVABLE in async compaction become skipped due to the temporary mark also in future sync compaction. Moreover, this may follow quite soon during __alloc_page_slowpath, without much time for kswapd to clear the pageblock skip marks. This goes against the idea that sync compaction should try to scan these blocks more thoroughly than the async compaction. The fix is to ensure in async compaction that these !MIGRATE_MOVABLE blocks are not marked to be skipped. Note this should not affect performance or locking impact of further async compactions, as skipping a block due to being !MIGRATE_MOVABLE is done soon after skipping a block marked to be skipped, both without locking. Signed-off-by:
-
Vlastimil Babka authored
Currently there are several functions to manipulate the deferred compaction state variables. The remaining case where the variables are touched directly is when a successful allocation occurs in direct compaction, or is expected to be successful in the future by kswapd. Here, the lowest order that is expected to fail is updated, and in the case of successful allocation, the deferred status and counter is reset completely. Create a new function compaction_defer_reset() to encapsulate this functionality and make it easier to understand the code. No functional change. Signed-off-by:
-
Damien Ramonda authored
The kernel's readahead algorithm sometimes interprets random read accesses as sequential and triggers unnecessary data prefecthing from storage device (impacting random read average latency). In order to identify sequential cache read misses, the readahead algorithm intends to check whether offset - previous offset == 1 (trivial sequential reads) or offset - previous offset == 0 (sequential reads not aligned on page boundary): if (offset - (ra->prev_pos >> PAGE_CACHE_SHIFT) <= 1UL) The current offset is stored in the "offset" variable of type "pgoff_t" (unsigned long), while previous offset is stored in "ra->prev_pos" of type "loff_t" (long long). Therefore, operands of the if statement are implicitly converted to type long long. Consequently, when previous offset > current offset (which happens on random pattern), the if condition is true and access is wrongly interpeted as sequential. An unnecessary data prefetching is triggered, impacting the average random read latency. Storing the previous offset value in a "pgoff_t" variable (unsigned long) fixes the sequential read detection logic. Signed-off-by:
Damien Ramonda <damien.ramonda@intel.com> Reviewed-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Pierre Tardy <pierre.tardy@intel.com> Acked-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
Hugh Dickins authored
Fix some "Bad rss-counter state" reports on exit, arising from the interaction between page migration and remap_file_pages(): zap_pte() must count a migration entry when zapping it. And yes, it is possible (though very unusual) to find an anon page or swap entry in a VM_SHARED nonlinear mapping: coming from that horrid get_user_pages(write, force) case which COWs even in a shared mapping. Signed-off-by:
-
Joonsoo Kim authored
We checked pfmemalloc by slab unit, not page unit. You can see this in is_slab_pfmemalloc(). So other pages don't need to be set/cleared pfmemalloc. And, therefore we should check pfmemalloc in page flag of first page, but current implementation don't do that. virt_to_head_page(obj) just return 'struct page' of that object, not one of first page, since the SLAB don't use __GFP_COMP when CONFIG_MMU. To get 'struct page' of first page, we first get a slab and try to get it via virt_to_head_page(slab->s_mem). Acked-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Pekka Enberg <penberg@iki.fi> (cherry picked from commit 73293c2f) Signed-off-by:
-
Bob Liu authored
Move alloc_hugepage() to a better place, no need for a seperate #ifndef CONFIG_NUMA Signed-off-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrew Davidoff <davidoff@qedmf.net> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by:
-
Prarit Bhargava authored
Further discussion here: http://marc.info/?l=linux-kernel&m=139073901101034&w=2 kbuild, 0day kernel build service, outputs the warning: arch/x86/kernel/irq.c:333:1: warning: the frame size of 2056 bytes is larger than 2048 bytes [-Wframe-larger-than=] because check_irq_vectors_for_cpu_disable() allocates two cpumasks on the stack. Fix this by moving the two cpumasks to a global file context. Reported-by:
Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1390915331-27375-1-git-send-email-prarit@redhat.com Cc: Andi Kleen <ak@linux.intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ruiv Wang <ruiv.wang@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> (cherry picked from commit 39424e89) Signed-off-by:
-
Prarit Bhargava authored
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791 When a cpu is downed on a system, the irqs on the cpu are assigned to other cpus. It is possible, however, that when a cpu is downed there aren't enough free vectors on the remaining cpus to account for the vectors from the cpu that is being downed. This results in an interesting "overflow" condition where irqs are "assigned" to a CPU but are not handled. For example, when downing cpus on a 1-64 logical processor system: <snip> [ 232.021745] smpboot: CPU 61 is now offline [ 238.480275] smpboot: CPU 62 is now offline [ 245.991080] ------------[ cut here ]------------ [ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250() [ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out [ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas [ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14 [ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48 [ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040 [ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000 [ 246.082430] Call Trace: [ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58 [ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0 [ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50 [ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250 [ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110 [ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80 [ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80 [ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0 [ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220 [ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30 [ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90 [ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0 [ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60 [ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70 [ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0 [ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0 [ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200 [ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30 [ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250 [ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80 [ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb [ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e [ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c [ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc [ 246.249610] ---[ end trace fb74fdef54d79039 ]--- [ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout [ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter Last login: Mon Nov 11 08:35:14 from 10.18.17.119 [root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5 [ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX (last lines keep repeating. ixgbe driver is dead until module reload.) If the downed cpu has more vectors than are free on the remaining cpus on the system, it is possible that some vectors are "orphaned" even though they are assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the watchdog fired and notified that something was wrong. This patch adds a function, check_vectors(), to compare the number of vectors on the CPU going down and compares it to the number of vectors available on the system. If there aren't enough vectors for the CPU to go down, an error is returned and propogated back to userspace. v2: Do not need to look at percpu irqs v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest Priority Mode v4: Additional changes suggested by Gong Chen. v5/v6/v7/v8: Updated comment text Signed-off-by:
Gong Chen <gong.chen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Ruiv Wang <ruiv.wang@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Signed-off-by:
-
Vincent Stehlé authored
Commit 6a04d05a ("USB: OHCI: fix bugs in debug routines") has removed the unused `verbose' argument of the debug function ohci_dump(); adapt ohci-spear accordingly. This fixes the following compilation error: drivers/usb/host/ohci-spear.c: In function ‘ohci_spear_start’: drivers/usb/host/ohci-spear.c:56:2: error: too many arguments to function ‘ohci_dump’ Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> (cherry picked from commit d8804ba0) (cherry picked from commit HEAD) Signed-off-by:
-
Takashi Iwai authored
ALC269 & co have many vendor-specific setups with COEF verbs. However, some verbs seem specific to some codec versions and they result in the codec stalling. Typically, such a case can be avoided by checking the return value from reading a COEF. If the return value is -1, it implies that the COEF is invalid, thus it shouldn't be written. This patch adds the invalid COEF checks in appropriate places accessing ALC269 and its variants. The patch actually fixes the resume problem on Acer AO725 laptop. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181Tested-by:
Francesco Muzio <muziofg@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> (cherry picked from commit f3ee07d8) Signed-off-by:
-
Jiri Kosina authored
device_index is a char type and the size of paired_dj_deivces is 7 elements, therefore proper bounds checking has to be applied to device_index before it is used. We are currently performing the bounds checking in logi_dj_recv_add_djhid_device(), which is too late, as malicious device could send REPORT_TYPE_NOTIF_DEVICE_UNPAIRED early enough and trigger the problem in one of the report forwarding functions called from logi_dj_raw_event(). Fix this by performing the check at the earliest possible ocasion in logi_dj_raw_event(). Cc: stable@vger.kernel.org Reported-by:
Ben Hawkes <hawkes@google.com> Reviewed-by:
-
Bjorn Helgaas authored
This adds a pci_upstream_bridge() interface to find the PCI-to-PCI bridge upstream from a device. This is typically just "dev->bus->self", but in the case of a VF on a virtual bus, we have to start from the corresponding PF. Returns NULL if there is no upstream PCI bridge, i.e., if the device is on a root bus. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> (cherry picked from commit c6bde215) Signed-off-by:
-
Lee, Chun-Yi authored
When the machine doesn't well handle the e820 persistent when hibernate resuming, then it may cause page fault when writing image to snapshot buffer: [ 17.929495] BUG: unable to handle kernel paging request at ffff880069d4f000 [ 17.933469] IP: [<ffffffff810a1cf0>] load_image_lzo+0x810/0xe40 [ 17.933469] PGD 2194067 PUD 77ffff067 PMD 2197067 PTE 0 [ 17.933469] Oops: 0002 [#1] SMP ... The ffff880069d4f000 page is in e820 reserved region of resume boot kernel: [ 0.000000] BIOS-e820: [mem 0x0000000069d4f000-0x0000000069e12fff] reserved ... [ 0.000000] PM: Registered nosave memory: [mem 0x69d4f000-0x69e12fff] So snapshot.c mark the pfn to forbidden pages map. But, this page is also in the memory bitmap in snapshot image because it's an original page used by image kernel, so it will also mark as an unsafe(free) page in prepare_image(). That means the page in e820 when resuming mark as "forbidden" and "free", it causes get_buffer() treat it as an allocated unsafe page. Then snapshot_write_next() return this page to load_image, load_image writing content to this address, but this page didn't really allocated . So, we got page fault. Although the root cause is from BIOS, I think aggressive check and significant message in kernel will better then a page fault for issue tracking, especially when serial console unavailable. This patch adds code in mark_unsafe_pages() for check does free pages in nosave region. If so, then it print message and return fault to stop whole S4 resume process: [ 8.166004] PM: Image loading progress: 0% [ 8.658717] PM: 0x6796c000 in e820 nosave region: [mem 0x6796c000-0x6796cfff] [ 8.918737] PM: Read 2511940 kbytes in 1.04 seconds (2415.32 MB/s) [ 8.926633] PM: Error -14 resuming [ 8.933534] PM: Failed to load hibernation image, recovering. Reviewed-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> [rjw: Subject] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> (cherry picked from commit 84c91b7a) Signed-off-by:
-
Jiang Liu authored
The assigned IRQ should be freed before calling pci_disable_device() when shutting down system, otherwise it will cause following warning. [ 568.879482] ------------[ cut here ]------------ [ 568.884236] WARNING: CPU: 1 PID: 3300 at /home/konrad/ssd/konrad/xtt-i386/bootstrap/linux-usb/fs/proc/generic.c:521 remove_proc_entry+0x165/0x170() [ 568.897846] remove_proc_entry: removing non-empty directory 'irq/16', leaking at least 'ohci_hcd:usb4' [ 568.907430] Modules linked in: dm_multipath dm_mod iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c_generic sg sd_mod crct10dif_generic crc_t10dif crct10dif_common radeon fbcon tileblit ttm font bitblit softcursor ata_generic ahci libahci drm_kms_helper skge r8169 libata mii scsi_mod wmi acpi_cpufreq [ 568.938539] CPU: 1 PID: 3300 Comm: init Tainted: G W 3.16.0-rc5upstream-01651-g03b9189 #1 [ 568.947946] Hardware name: ECS A780GM-A Ultra/A780GM-A Ultra, BIOS 080015 04/01/2010 [ 568.956008] 00000209 ed0f1cd0 c1617946 c175403c ed0f1d00 c1090c3f c1754084 ed0f1d2c [ 568.964068] 00000ce4 c175403c 00000209 c11f22a5 c11f22a5 f755e8c0 ed0f1d78 f755e90d [ 568.972128] ed0f1d18 c1090cde 00000009 ed0f1d10 c1754084 ed0f1d2c ed0f1d60 c11f22a5 [ 568.980194] Call Trace: [ 568.982715] [<c1617946>] dump_stack+0x48/0x60 [ 568.987294] [<c1090c3f>] warn_slowpath_common+0x7f/0xa0 [ 569.003887] [<c1090cde>] warn_slowpath_fmt+0x2e/0x30 [ 569.009092] [<c11f22a5>] remove_proc_entry+0x165/0x170 [ 569.014476] [<c10da6ca>] unregister_irq_proc+0xaa/0xc0 [ 569.019858] [<c10d582f>] free_desc+0x1f/0x60 [ 569.024346] [<c10d58aa>] irq_free_descs+0x3a/0x80 [ 569.029283] [<c10d9e9d>] irq_dispose_mapping+0x2d/0x50 [ 569.034666] [<c1078fd3>] mp_unmap_irq+0x73/0xa0 [ 569.039423] [<c107196b>] acpi_unregister_gsi_ioapic+0x2b/0x40 [ 569.045431] [<c107180f>] acpi_unregister_gsi+0xf/0x20 [ 569.050725] [<c1339cad>] acpi_pci_irq_disable+0x4b/0x50 [ 569.056196] [<c14daa38>] pcibios_disable_device+0x18/0x20 [ 569.061848] [<c130123d>] do_pci_disable_device+0x4d/0x60 [ 569.067410] [<c13012b7>] pci_disable_device+0x47/0xb0 [ 569.077814] [<c14800b1>] usb_hcd_pci_shutdown+0x31/0x40 [ 569.083285] [<c1304b19>] pci_device_shutdown+0x19/0x50 [ 569.088667] [<c13fda64>] device_shutdown+0x14/0x120 [ 569.093777] [<c10ac29d>] kernel_restart_prepare+0x2d/0x30 [ 569.099429] [<c10ac41e>] kernel_restart+0xe/0x60 [ 569.109028] [<c10ac611>] SYSC_reboot+0x191/0x220 [ 569.159269] [<c10ac6ba>] SyS_reboot+0x1a/0x20 [ 569.163843] [<c161c718>] sysenter_do_call+0x12/0x16 [ 569.168951] ---[ end trace ccc1ec4471c289c9 ]--- Tested-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit c5946f9d) Signed-off-by:
-
James P Michels III authored
This patch adds a usb quirk to support devices with interupt endpoints and bInterval values expressed as microframes. The quirk causes the parse endpoint function to modify the reported bInterval to a standards conforming value. There is currently code in the endpoint parser that checks for bIntervals that are outside of the valid range (1-16 for USB 2+ high speed and super speed interupt endpoints). In this case, the code assumes the bInterval is being reported in 1ms frames. As well, the correction is only applied if the original bInterval value is out of the 1-16 range. With this quirk applied to the device, the bInterval will be accurately adjusted from microframes to an exponent. Signed-off-by:
James P Michels III <james.p.michels@gmail.com> Signed-off-by:
-
Joonyoung Shim authored
The usb device will autoresume from choose_wakeup() if it is autosuspended with the wrong wakeup setting, but below errors occur because usb3503 misc driver will switch to standby mode when suspended. As add USB_QUIRK_RESET_RESUME, it can stop setting wrong wakeup from autosuspend_check(). [ 7.734717] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 7.854658] usb 1-3: device descriptor read/64, error -71 [ 8.079657] usb 1-3: device descriptor read/64, error -71 [ 8.294664] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 8.414658] usb 1-3: device descriptor read/64, error -71 [ 8.639657] usb 1-3: device descriptor read/64, error -71 [ 8.854667] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.264598] usb 1-3: device not accepting address 3, error -71 [ 9.374655] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 9.784601] usb 1-3: device not accepting address 3, error -71 [ 9.784838] usb usb1-port3: device 1-3 not suspended yet Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Preston Fick authored
This `usb_reset_device` command has been around since the driver was originally reverse engineered. It doesn't cause much issue on single interface CP210x devices, but on the CP2105 and CP2108 with 2 and 4 interfaces respectively it will cause instability on enumeration and delays enumeration noticably. There should be no reason to reset a device at startup, per the CP210x AN571 spec. Signed-off-by:
Preston Fick <preston.fick@silabs.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
