- 27 Aug, 2020 39 commits
-
-
Ben Skeggs authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 498595ab ] Stale pointer was tripping up the unload path. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Christoph Hellwig authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit a39c4606 ] p9_fd_open just fgets file descriptors passed in from userspace, but doesn't verify that they are valid for read or writing. This gets cought down in the VFS when actually attempting a read or write, but a new warning added in linux-next upsets syzcaller. Fix this by just verifying the fds early on. Link: http://lkml.kernel.org/r/20200710085722.435850-1-hch@lst.de Reported-by: syzbot+e6f77e16ff68b2434a2c@syzkaller.appspotmail.com Signed-off-by:
Christoph Hellwig <hch@lst.de> [Dominique: amend goto as per Doug Nazar's review] Signed-off-by:
Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit f7e6b19b upstream. When doing a "write" ioctl call, properly check that we have permissions to do so before copying anything from userspace or anything else so we can "fail fast". This includes also covering the MEMWRITE ioctl which previously missed checking for this. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: stable <stable@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [rw: Fixed locking issue] Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Yunhai Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit ebfdfeea upstream. vgacon_scrollback_update() always leaves enbough room in the scrollback buffer for the next call, but if the console size changed that room might not actually be enough, and so we need to re-check. The check should be in the loop since vgacon_scrollback_cur->tail is updated in the loop and count may be more than 1 when triggered by CSI M, as Jiri's PoC: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <fcntl.h> int main(int argc, char** argv) { int fd = open("/dev/tty1", O_RDWR); unsigned short size[3] = {25, 200, 0}; ioctl(fd, 0x5609, size); // VT_RESIZE write(fd, "\e[1;1H", 6); for (int i = 0; i < 30; i++) write(fd, "\e[10M", 5); } It leads to various crashes as vgacon_scrollback_update writes out of the buffer: BUG: unable to handle page fault for address: ffffc900001752a0 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:mutex_unlock+0x13/0x30 ... Call Trace: n_tty_write+0x1a0/0x4d0 tty_write+0x1a0/0x2e0 Or to KASAN reports: BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed This fixes CVE-2020-14331. Reported-by:
张云海 <zhangyunhai@nsfocus.com> Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Reported-by:
Kyungtae Kim <kt0755@gmail.com> Fixes: 15bdab95 ([PATCH] vgacon: Add support for soft scrollback) Cc: stable@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Solar Designer <solar@openwall.com> Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu> Cc: Anthony Liguori <aliguori@amazon.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by:
-
Peilin Ye authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 629b49c8 upstream. Check `num_rsp` before using it as for-loop counter. Add `unlock` label. Cc: stable@vger.kernel.org Signed-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Peilin Ye authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 75bbd2ea upstream. Check `num_rsp` before using it as for-loop counter. Cc: stable@vger.kernel.org Signed-off-by:
-
Peilin Ye authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 51c19bf3 upstream. Check upon `num_rsp` is insufficient. A malformed event packet with a large `num_rsp` number makes hci_extended_inquiry_result_evt() go out of bounds. Fix it. This patch fixes the following syzbot bug: https://syzkaller.appspot.com/bug?id=4bf11aa05c4ca51ce0df86e500fce486552dc8d2 Reported-by: syzbot+d8489a79b781849b9c46@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 80982c7e upstream. Some ioctls via OSS sequencer API may race and lead to UAF when the port create and delete are performed concurrently, as spotted by a couple of syzkaller cases. This patch is an attempt to address it by serializing the ioctls with the existing register_mutex. Basically OSS sequencer API is an obsoleted interface and was designed without much consideration of the concurrency. There are very few applications with it, and the concurrent performance isn't asked, hence this "big hammer" approach should be good enough. Reported-by: syzbot+1a54a94bd32716796edd@syzkaller.appspotmail.com Reported-by: syzbot+9d2abfef257f3e2d4713@syzkaller.appspotmail.com Suggested-by:
Hillf Danton <hdanton@sina.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200804185815.2453-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Erik Ekman authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit d2a4309c upstream. When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba laptop, it changed product ID to 0x9062 when entering QDL mode: usb 2-4: new high-speed USB device number 78 using xhci_hcd usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: EM7305 usb 2-4: Manufacturer: Sierra Wireless, Incorporated The upgrade could complete after running # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id qcserial 2-4:1.0: Qualcomm USB modem converter detected usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0 Signed-off-by:
Erik Ekman <erik@kryo.se> Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jiang Ying authored
BugLink: https://bugs.launchpad.net/bugs/1892822 This patch is used to fix ext4 direct I/O read error when the read size is not aligned with block size. Then, I will use a test to explain the error. (1) Make a file that is not aligned with block size: $dd if=/dev/zero of=./test.jar bs=1000 count=3 (2) I wrote a source file named "direct_io_read_file.c" as following: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/file.h> #include <sys/types.h> #include <sys/stat.h> #include <string.h> #define BUF_SIZE 1024 int main() { int fd; int ret; unsigned char *buf; ret = posix_memalign((void **)&buf, 512, BUF_SIZE); if (ret) { perror("posix_memalign failed"); exit(1); } fd = open("./test.jar", O_RDONLY | O_DIRECT, 0755); if (fd < 0){ perror("open ./test.jar failed"); exit(1); } do { ret = read(fd, buf, BUF_SIZE); printf("ret=%d\n",ret); if (ret < 0) { perror("write test.jar failed"); } } while (ret > 0); free(buf); close(fd); } (3) Compile the source file: $gcc direct_io_read_file.c -D_GNU_SOURCE (4) Run the test program: $./a.out The result is as following: ret=1024 ret=1024 ret=952 ret=-1 write test.jar failed: Invalid argument. I have tested this program on XFS filesystem, XFS does not have this problem, because XFS use iomap_dio_rw() to do direct I/O read. And the comparing between read offset and file size is done in iomap_dio_rw(), the code is as following: if (pos < size) { retval = filemap_write_and_wait_range(mapping, pos, pos + iov_length(iov, nr_segs) - 1); if (!retval) { retval = mapping->a_ops->direct_IO(READ, iocb, iov, pos, nr_segs); } ... } ...only when "pos < size", direct I/O can be done, or 0 will be return. I have tested the fix patch on Ext4, it is up to the mustard of EINVAL in man2(read) as following: #include <unistd.h> ssize_t read(int fd, void *buf, size_t count); EINVAL fd is attached to an object which is unsuitable for reading; or the file was opened with the O_DIRECT flag, and either the address specified in buf, the value specified in count, or the current file offset is not suitably aligned. So I think this patch can be applied to fix ext4 direct I/O error. However Ext4 introduces direct I/O read using iomap infrastructure on kernel 5.5, the patch is commit <b1b4705d> ("ext4: introduce direct I/O read using iomap infrastructure"), then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct I/O read. So this problem does not exist on kernel 5.5 for Ext4. >From above description, we can see this problem exists on all the kernel versions between kernel 3.14 and kernel 5.4. It will cause the Applications to fail to read. For example, when the search service downloads a new full index file, the search engine is loading the previous index file and is processing the search request, it can not use buffer io that may squeeze the previous index file in use from pagecache, so the serch service must use direct I/O read. Please apply this patch on these kernel versions, or please use the method on kernel 5.5 to fix this problem. Fixes: 9fe55eea ("Fix race when checking i_size on direct i/o read") Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Wang Long <wanglong19@meituan.com> Signed-off-by:
Jiang Ying <jiangying8582@126.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit c0842fbc upstream. The addition of percpu.h to the list of includes in random.h revealed some circular dependencies on arm64 and possibly other platforms. This include was added solely for the pseudo-random definitions, which have nothing to do with the rest of the definitions in this file but are still there for legacy reasons. This patch moves the pseudo-random parts to linux/prandom.h and the percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and protected against recursive inclusion. A further cleanup step would be to remove this from <linux/random.h> entirely, and make people who use the prandom infrastructure include just the new header file. That's a bit of a churn patch, but grepping for "prandom_" and "next_pseudo_random32" "struct rnd_state" should catch most users. But it turns out that that nice cleanup step is fairly painful, because a _lot_ of code currently seems to depend on the implicit include of <linux/random.h>, which can currently come in a lot of ways, including such fairly core headfers as <linux/net.h>. So the "nice cleanup" part may or may never happen. Fixes: 1c9df907 ("random: fix circular include dependency on arm64 after addition of percpu.h") Tested-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 83bdc727 upstream. It turns out that the plugin right now ends up being really unhappy about the change from 'static' to 'extern' storage that happened in commit f227e3ec ("random32: update the net random state on interrupt and activity"). This is probably a trivial fix for the latent_entropy plugin, but for now, just remove net_rand_state from the list of things the plugin worries about. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Emese Revfy <re.emese@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 1c9df907 upstream. Daniel Díaz and Kees Cook independently reported that commit f227e3ec ("random32: update the net random state on interrupt and activity") broke arm64 due to a circular dependency on include files since the addition of percpu.h in random.h. The correct fix would definitely be to move all the prandom32 stuff out of random.h but for backporting, a smaller solution is preferred. This one replaces linux/percpu.h with asm/percpu.h, and this fixes the problem on x86_64, arm64, arm, and mips. Note that moving percpu.h around didn't change anything and that removing it entirely broke differently. When backporting, such options might still be considered if this patch fails to help. [ It turns out that an alternate fix seems to be to just remove the troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h> that causes the circular dependency. But we might as well do the whole belt-and-suspenders thing, and minimize inclusion in <linux/random.h> too. Either will fix the problem, and both are good changes. - Linus ] Reported-by:
Daniel Díaz <daniel.diaz@linaro.org> Reported-by:
Kees Cook <keescook@chromium.org> Tested-by:
Marc Zyngier <maz@kernel.org> Fixes: f227e3ec Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Grygorii Strashko authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit aa54ea90 upstream. Fix build error for the case: defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6) config: keystone_defconfig CC arch/arm/kernel/signal.o In file included from ../include/linux/random.h:14, from ../arch/arm/kernel/signal.c:8: ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’: ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’? : "Q" (*(const unsigned long *)current_stack_pointer)); ^~~~~~~~~~~~~~~~~~~~~ user_stack_pointer Fixes: f227e3ec ("random32: update the net random state on interrupt and activity") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Willy Tarreau authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit f227e3ec upstream. This modifies the first 32 bits out of the 128 bits of a random CPU's net_rand_state on interrupt or CPU activity to complicate remote observations that could lead to guessing the network RNG's internal state. Note that depending on some network devices' interrupt rate moderation or binding, this re-seeding might happen on every packet or even almost never. In addition, with NOHZ some CPUs might not even get timer interrupts, leaving their local state rarely updated, while they are running networked processes making use of the random state. For this reason, we also perform this update in update_process_times() in order to at least update the state when there is user or system activity, since it's the only case we care about. Reported-by:
Amit Klein <aksecurity@gmail.com> Suggested-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit bdd65589 upstream. 0day reported a possible circular locking dependency: Chain exists of: &irq_desc_lock_class --> console_owner --> &port_lock_key Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&port_lock_key); lock(console_owner); lock(&port_lock_key); lock(&irq_desc_lock_class); The reason for this is a printk() in the i8259 interrupt chip driver which is invoked with the irq descriptor lock held, which reverses the lock operations vs. printk() from arbitrary contexts. Switch the printk() to printk_deferred() to avoid that. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.deSigned-off-by:
-
Andrea Righi authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit c2c63310 ] There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device: 1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed" If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing". Make sure to check also for state == "Closed" in step 4 to prevent the deadlock. Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event(). Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Raviteja Narayanam authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 0db9254d ] This reverts commit d358def7. There are two issues with "i2c: cadence: Fix the hold bit setting" commit. 1. In case of combined message request from user space, when the HOLD bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent on the bus even before the last message is started. This is because when the HOLD bit is cleared, the FIFOS are empty and there is no pending transfer. The STOP condition should occur only after the last message is completed. 2. The code added by the commit is redundant. Driver is handling the setting/clearing of HOLD bit in right way before the commit. The setting of HOLD bit based on 'bus_hold_flag' is taken care in cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv functions. The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and cdns_i2c_recv functions based on bus_hold_flag and byte count. Since clearing of HOLD bit is done after the slave address is written to the register (writing to address register triggers the message transfer), it is ensured that STOP condition occurs at the right time after completion of the pending transfer (last message). Signed-off-by:
Raviteja Narayanam <raviteja.narayanam@xilinx.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Yoshihiro Shimoda authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 015c5d5e ] According to the report of [1], this driver is possible to cause the following error in ravb_tx_timeout_work(). ravb e6800000.ethernet ethernet: failed to switch device to config mode This error means that the hardware could not change the state from "Operation" to "Configuration" while some tx and/or rx queue are operating. After that, ravb_config() in ravb_dmac_init() will fail, and then any descriptors will be not allocaled anymore so that NULL pointer dereference happens after that on ravb_start_xmit(). To fix the issue, the ravb_tx_timeout_work() should check the return values of ravb_stop_dma() and ravb_dmac_init(). If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX and just exits. If ravb_dmac_init() fails, just exits. [1] https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/Reported-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 1e8fd3a9 ] The implementation of s3fwrn5_recv_frame() is supposed to consume skb on all execution paths. Release skb before returning -ENODEV. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Remi Pommarel authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 6a01afcf ] At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545d (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.ltSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ido Schimmel authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 7d8e8f34 ] The lifetime of the Rx listener item ('rxl_item') is managed using RCU, but is dereferenced outside of RCU read-side critical section, which can lead to a use-after-free. Fix this by increasing the scope of the RCU read-side critical section. Fixes: 93c1edb2 ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 63634aa6 ] The interrupt URB transfer-buffer was never freed on disconnect or after probe errors. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 8d8e95fd ] Add the missing endpoint sanity check to prevent a NULL-pointer dereference should a malicious device lack the expected endpoints. Note that the driver has a broken endpoint-lookup helper, lan78xx_get_endpoints(), which can end up accepting interfaces in an altsetting without endpoints as long as *some* altsetting has a bulk-in and a bulk-out endpoint. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by:
-
Michael Karcher authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 04a8a3d0 ] The slow path for traced system call entries accessed a wrong memory location to get the number of the maximum allowed system call number. Renumber the numbered "local" label for the correct location to avoid collisions with actual local labels. Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Tested-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Fixes: f3a83088 ("sh: Add a few missing irqflags tracing markers.") Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 8999dc89 upstream. We should check null before do x25_neigh_put in x25_disconnect, otherwise may cause null-ptr-deref like this: #include <sys/socket.h> #include <linux/x25.h> int main() { int sck_x25; sck_x25 = socket(AF_X25, SOCK_SEQPACKET, 0); close(sck_x25); return 0; } BUG: kernel NULL pointer dereference, address: 00000000000000d8 CPU: 0 PID: 4817 Comm: t2 Not tainted 5.7.0-rc3+ #159 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3- RIP: 0010:x25_disconnect+0x91/0xe0 Call Trace: x25_release+0x18a/0x1b0 __sock_release+0x3d/0xc0 sock_close+0x13/0x20 __fput+0x107/0x270 ____fput+0x9/0x10 task_work_run+0x6d/0xb0 exit_to_usermode_loop+0x102/0x110 do_syscall_64+0x23c/0x260 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Reported-by: syzbot+6db548b615e5aeefdce2@syzkaller.appspotmail.com Fixes: 4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Xiyu Yang authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 4becb7ee upstream. x25_connect() invokes x25_get_neigh(), which returns a reference of the specified x25_neigh object to "x25->neighbour" with increased refcnt. When x25 connect success and returns, the reference still be hold by "x25->neighbour", so the refcount should be decreased in x25_disconnect() to keep refcount balanced. The reference counting issue happens in x25_disconnect(), which forgets to decrease the refcnt increased by x25_get_neigh() in x25_connect(), causing a refcnt leak. Fix this issue by calling x25_neigh_put() before x25_disconnect() returns. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
Peilin Ye authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit bbc8a99e upstream. rds_notify_queue_get() is potentially copying uninitialized kernel stack memory to userspace since the compiler may leave a 4-byte hole at the end of `cmsg`. In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which unfortunately does not always initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: f037590f ("rds: fix a leak of kernel memory") Fixes: bdbe6fbc ("RDS: recv.c") Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 033724d6 ] syzbot is reporting general protection fault in bitfill_aligned() [1] caused by integer underflow in bit_clear_margins(). The cause of this problem is when and how do_vc_resize() updates vc->vc_{cols,rows}. If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres is going to shrink, vc->vc_{cols,rows} will not be updated. This allows bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will try to overrun the __iomem region and causes general protection fault. Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to new_cols = (cols ? cols : vc->vc_cols); new_rows = (lines ? lines : vc->vc_rows); exception. Since cols and lines are calculated as cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres); rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres); cols /= vc->vc_font.width; rows /= vc->vc_font.height; vc_resize(vc, cols, rows); in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0 and var.yres < vc->vc_font.height makes rows = 0. This means that const int fd = open("/dev/fb0", O_ACCMODE); struct fb_var_screeninfo var = { }; ioctl(fd, FBIOGET_VSCREENINFO, &var); var.xres = var.yres = 1; ioctl(fd, FBIOPUT_VSCREENINFO, &var); easily reproduces integer underflow bug explained above. Of course, callers of vc_resize() are not handling vc_do_resize() failure is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore, as a band-aid workaround, this patch checks integer underflow in "struct fbcon_ops"->clear_margins call, assuming that vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not cause integer overflow. [1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c6Reported-and-tested-by:
syzbot <syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200715015102.3814-1-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit eec13b42 ] Unprivileged memory accesses generated by the so-called "translated" instructions (e.g. LDRT) in kernel mode can cause user watchpoints to fire unexpectedly. In such cases, the hw_breakpoint logic will invoke the user overflow handler which will typically raise a SIGTRAP back to the current task. This is futile when returning back to the kernel because (a) the signal won't have been delivered and (b) userspace can't handle the thing anyway. Avoid invoking the user overflow handler for watchpoints triggered by kernel uaccess routines, and instead single-step over the faulting instruction as we would if no overflow handler had been installed. Cc: <stable@vger.kernel.org> Fixes: f81ef4a9 ("ARM: 6356/1: hw-breakpoint: add ARM backend for the hw-breakpoint framework") Reported-by:
Luis Machado <luis.machado@linaro.org> Tested-by:
Will Deacon <will@kernel.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Sheng Yong authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 720db068 ] Dentry bitmap is not enough to detect incorrect dentries. So this patch also checks the namelen value of a dentry. Signed-off-by:
Gong Chen <gongchen4@huawei.com> Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 4e240d1b ] If namelen is corrupted to have very long value, fill_dentries can copy wrong memory area. Reviewed-by:
-
Steve Cohen authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 8490d6a7 upstream. A use-after-free in drm_gem_open_ioctl can happen if the GEM object handle is closed between the idr lookup and retrieving the size from said object since a local reference is not being held at that point. Hold the local reference while the object can still be accessed to fix this and plug the potential security hole. Signed-off-by:
Steve Cohen <cohens@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Peilin Ye authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 543e8669 upstream. Compiler leaves a 4-byte hole near the end of `dev_info`, causing amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace when `size` is greater than 356. In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which unfortunately does not initialize that 4-byte hole. Fix it by using memset() instead. Cc: stable@vger.kernel.org Fixes: c193fa91 ("drm/amdgpu: information leak in amdgpu_info_ioctl()") Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Suggested-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Robert Hancock authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit b361663c upstream. Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e5 ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.comSigned-off-by:
Robert Hancock <hancockrwd@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Andreas Gruenbacher authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit c4803c49 ] Add a nfs_listxattr operation. Move the call to security_inode_listsecurity from list operation of the "security.*" xattr handler to nfs_listxattr. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: linux-nfs@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 728c1e2a ] In ath9k_wmi_cmd, the allocated network buffer needs to be released if timeout happens. Otherwise memory will be leaked. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 853acf7c ] In htc_config_pipe_credits, htc_setup_complete, and htc_connect_service if time out happens, the allocated buffer needs to be released. Otherwise there will be memory leak. Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit a7b2df76 ] In cx23888_ir_probe if kfifo_alloc fails the allocated memory for state should be released. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
- 11 Aug, 2020 1 commit
-
-
Stefan Bader authored
Signed-off-by:Stefan Bader <stefan.bader@canonical.com>
-
