Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621095349.GI17204@e110455-lin.cambridge.arm.com

Komeda interrupts may be shared with other hardware blocks.
One needs to use devm_request_irq() with IRQF_SHARED to create a shared
 interrupt handler.
As a result of not using drm_irq_install() api, one needs to set
"(struct drm_device *)->irq_enabled = true/false" to enable/disable
vblank interrupts.

Changes from v1:-
1. Squashed the following two patches into one (as the second patch is a
consequence of the first one):-
   drm/komeda: Avoid using DRIVER_IRQ_SHARED
   drm/komeda: Enable/Disable vblank interrupts
2. Fixed the commit message (as pointed by Daniel Vetter)
3. Removed calls to 'drm_irq_uninstall()' as we are no longer using
drm_irq_install()
4. Removed the struct member 'komeda_kms_driver.irq_handler' as it is not
used anywhere.
Signed-off-by: Ayan Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

clang points out a bug in the clock calculation on 32-bit, that leads
to the clock_ratio always being zero:

drivers/gpu/drm/arm/display/komeda/komeda_crtc.c:31:36: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
        aclk = komeda_calc_aclk(kcrtc_st) << 32;

Move the shift into the division to make it apply on a 64-bit
variable. Also use the more expensive div64_u64() instead of div_u64()
to account for pxlclk being a 64-bit integer.

Fixes: 1f7f9ab7 ("drm/komeda: Add engine clock requirement check for the downscaling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

Features:
- HDR support (Uma, Ville)
- Add I2C symlink under HDMI connector similar to DP (Oleg)
- Add ICL multi-segmented gamma support (Shashank, Uma)
- Update register whitelist support for new hardware (Robert, John)
- GuC firmware update with updated ABI interface (Michal, Oscar)
- Add support for new DMC header versions (Lucas)
- In-kernel blitter client for selftest use (Matthew)
- Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt)
- EHL platform feature updates (Matt)
- Use Command Transport Buffers with GuC on all gens (Daniele)
- New i915.force_probe module parameter to replace i915.alpha_support (Jani)

Refactoring:
- Better runtime PM code abstraction/encapsulation (Daniele)
- VBT parsing cleanup and improvements (Jani)
- Move display code to its own subdirectory (Jani)
- Header cleanup (Jani, Daniele)
- Prep work for subsclice mask expansion (Stuart)
- Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko)
- Remove unused atomic property get/set stubs (Maarten)
- GTT cleanups and improvements (Mika)
- Pass intel_ types instead of drm_ types in plenty of display code (Ville)
- Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko)
- Consider AML variants simply as either KBL or CFL ULX (Ville)
- State checker cleanups and improvements (Ville)
- GEM code reorganization to more files under gem subdirectory (Chris)
- Reducing dependency on a coarse struct_mutex (Chris)

Fixes:
- Fix use of uninitialized/incorrect error pointers (Colin, Dan)
- Fix DSI fastboot on some VLV/CHV platforms (Hans)
- Fix DSI error path (Hans)
- Add ICL port A combo PHY HW state check (Imre)
- Fix ICL AUX-B HW not done issue (Imre)
- Fix perf whitelist on gen10+ (Lionel)
- Fix PSR exit by forcing manual exit on older gens (José)
- Match voltage ranges instead of exact values (Lucas)
- Fix SDVO HDMI audio, with cleanups (Ville)
- Fix plane state dumps (Ville)
- Fix driver cleanup code to support driver hot unbind (Janusz)
- Add checks for ICL memory bandwidth requirements (Ville)
- Fix toggling between no C8 planes vs. at least one C8 plane (Ville)
- Improved checks on PLL usage conditions, refactoring (Ville)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
- Take a runtime pm wakeref for atomic commits (Chris)
- Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris)
- Avoid refcount_inc on known zero count to avoid debug flagging (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v9x1lpdh.fsf@intel.com

drm-misc-next for v5.3:

UAPI Changes:
- Give each dma-buf their own inode, add DMA_BUF_SET_NAME ioctl and a show_fdinfo handler.

Cross-subsystem Changes:
- Pull in the topic/remove-fbcon-notifiers branch:
  * remove fbdev notifier usage for fbcon, as prep work to clean up the fbcon locking
  * assorted locking checks in vt/console code
  * assorted notifier and cleanups in fbdev and backlight code

Core Changes:
- Make drm_debugfs_create_files() never fail.
- add debug print to update_vblank_count.
- Add DP_DPCD_QUIRK_NO_SINK_COUNT quirk.
- Add todo item for drm_gem_objects.
- Unexport drm_gem_(un)pin/v(un)map.
- Document struct drm_cmdline_mode.
- Rewrite the command handler for mode names, and add support to specify
  rotation, reflection and overscan. With a new selftest! :)
- Fixes to drm/client for improving rotation support, and fixing variable scope.
- Small fixes to self refresh helper.

Driver Changes:
- Add rockchip RK3328 support.
- Assorted driver fixes to rockchip, vc4, rcar-du, vkms.
- Expose panfrost performance counters through unstable ioctl's, hidden
  behind a module parameter.
- Enumerate CRC sources list in vkms.
- Add a basic kms driver for the Ingenic JZ47xx SoC, which will be expanded
  soon with more advanced features.
- Suspend/resume fix for stm.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18e22ec1-adf3-3a75-34a3-9fe09a91eef5@linux.intel.com

- The coherent memory changes including mm changes.
- Some vmwgfx debug fixes.
- Removal of vmwgfx legacy security checks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <VMware> <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619072531.4026-1-thomas@shipmail.org

I rushed merging this a bit too much, and Noralf pointed out that
we're a lot better already and have made great progress.

Let's try again.

v2: Fix typo spotted by Eric Engestrom.

Fixes: 8db420ac ("drm/todo: Improve drm_gem_object funcs todo")
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618140241.19856-1-daniel.vetter@ffwll.ch

Without this fix, the system can not go in "suspend" mode
due to an error in drv_suspend function.

Fixes: 35ab6cfb ("drm/stm: support runtime power management")
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1560755897-5002-1-git-send-email-yannick.fertre@st.com

If state allocation fails, we still try to give back the reference on
it. Also initialize ret in case the crtc is not enabled and we hit the
eject button.

Fixes: 1452c25b ("drm: Add helpers to kick off self refresh mode in drivers")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619181951.192305-1-sean@poorly.run

Warnings popup when "make ARCH=i386"

In file included from include/drm/drm_mm.h:49,
                 from include/drm/drm_vma_manager.h:26,
                 from include/drm/drm_gem.h:40,
                 from drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:9:
drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c: In function 'komeda_fb_afbc_size_check':
drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:96:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
   DRM_DEBUG_KMS("afbc size check failed, obj_size: 0x%lx. min_size 0x%x.\n",

That leads by misuse "%lx" as format speicifier for size_t, correct it
to "%zx"
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

This test is flipped around so it either leads to a memory leak or a
NULL dereference.

Fixes: 1452c25b ("drm: Add helpers to kick off self refresh mode in drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619100141.GA28596@mwanda

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Since commit eb8d0f5a ("drm/i915: Remove GPU reset dependence on
struct_mutex"), the I915_WAIT_LOCKED flags passed to i915_request_wait()
has been defunct. Now go ahead and remove it from all callers.

References: eb8d0f5a ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-3-chris@chris-wilson.co.uk

Add a KMS driver for the Ingenic JZ47xx family of SoCs.
This driver is meant to replace the aging jz4740-fb driver.

This driver does not make use of the simple pipe helper, for the reason
that it will soon be updated to support more advanced features like
multiple planes, IPU integration for colorspace conversion and up/down
scaling, support for DSI displays, and TV-out and HDMI outputs.

Notes:
    v2: - Remove custom handling of panel. The panel is now discovered using
          the standard API.
        - Lots of small tweaks suggested by upstream

    v3: - Use devm_drm_dev_init()
        - Update compatible strings to -lcd instead of -drm
        - Add destroy() callbacks to plane and crtc
        - The ingenic,lcd-mode is now read from the bridge's DT node

    v4: Remove ingenic,lcd-mode property completely. The various modes are now
        deduced from the connector type, the pixel format or the bus flags.

    v5: - Fix framebuffer size incorrectly calculated for 24bpp framebuffers
        - Use 32bpp framebuffer instead of 16bpp, as it'll work with both
          16-bit and 24-bit panel
        - Get rid of drm_format_plane_cpp() which has been dropped upstream
        - Avoid using drm_format_info->depth, which is deprecated.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152331.23160-2-paul@crapouillou.net

Add documentation for the devicetree bindings of the LCD controller
present in the JZ47xx family of SoCs from Ingenic.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152331.23160-1-paul@crapouillou.net

The process_csb routine from execlists_submission is incompatible with
the GuC backend. Add a warning to detect if we accidentally end up in
the wrong spot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618110736.31155-1-chris@chris-wilson.co.uk

The idea behind keeping the saturation mask local to a context backfired
spectacularly. The premise with the local mask was that we would be more
proactive in attempting to use semaphores after each time the context
idled, and that all new contexts would attempt to use semaphores
ignoring the current state of the system. This turns out to be horribly
optimistic. If the system state is still oversaturated and the existing
workloads have all stopped using semaphores, the new workloads would
attempt to use semaphores and be deprioritised behind real work. The
new contexts would not switch off using semaphores until their initial
batch of low priority work had completed. Given sufficient backload load
of equal user priority, this would completely starve the new work of any
GPU time.

To compensate, remove the local tracking in favour of keeping it as
global state on the engine -- once the system is saturated and
semaphores are disabled, everyone stops attempting to use semaphores
until the system is idle again. One of the reason for preferring local
context tracking was that it worked with virtual engines, so for
switching to global state we could either do a complete check of all the
virtual siblings or simply disable semaphores for those requests. This
takes the simpler approach of disabling semaphores on virtual engines.

The downside is that the decision that the engine is saturated is a
local measure -- we are only checking whether or not this context was
scheduled in a timely fashion, it may be legitimately delayed due to user
priorities. We still have the same dilemma though, that we do not want
to employ the semaphore poll unless it will be used.

v2: Explain why we need to assume the worst wrt virtual engines.

Fixes: ca6e56f6 ("drm/i915: Disable semaphore busywaits on saturated systems")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-8-chris@chris-wilson.co.uk

Writeback split is also for workaround the size limitation of d71 scaler.
Like layer_split, writeback downscaling also can use two scalers to handle
the scaling half-by-half. The only differnence is writback needs a
standalone component (splitter)'s help to split the composition result.
The data pipeline of writeback split as below:

                   /-> scaler-0 ->\
 compiz -> splitter                merger -> wb_layer -> memory
                   \-> scaler-1 ->/

v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

Similar to Layer Split, but Splitter is used for writeback, which splits
the compiz result to two half parts and then feed them to two scalers.

v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

User may send null writeback configurations for writeback connector like:
- Only bind the writeback connector to crtc.
- set a fb_id(0) to writeback_fb_id_property
All above configurations are meaningless for writeback, but since they are
still valid configurations, accept them.

Depends on:
- https://patchwork.freedesktop.org/series/60856/Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

Since the component_state->input[i] is only valid when it is active, the
content of input[i] is undefined if it is inactive. The user must check the
state->active_inputs with input index firstly before using state->input[i].
Refine the function to_d71_input_id and directly move such check into it.
Simplify the using and avoid problem that caller forget the valid check.

Depends on:
- https://patchwork.freedesktop.org/series/60856/Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>

One crtc can use two komeda_pipeline, and one works as master and as
slave. the slave pipeline doesn't have its own output and timing
ctrlr, but pre-composite the input layer data flow and then feed the
result to master. the pipeline configuration like:

slave-layer-0 \
...            slave->CU
slave-layer-4 /         \
                        \
master-layer-0 --------> master->CU -> ...
 ...                  /
master-layer-4 ------>

Since komeda Compiz doesn't output alpha, so the slave->CU result
only can be used as bottom input when blend it with master input data
flows.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Komeda supports two types of layer split:
- none-scaling split
- scaling split
Since D71 merger only support scaler as input, so for none-scaling split,
the two layer dflow will be output to compiz directly. for scaling_split,
the data flow will be merged by merger firstly, then output the merged
data flow to compiz.

Komeda handles the split in kernel completely to hide the detailed and
complicated split calcualtion to user mode, for user only need to set the
layer_split property to enable/disable it.

v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

To achieve same caling effect compare with none split, the texel
calculation need to use the same scaling ratio before split, so add
"total_xxx" to pipeline to describe the hsize/vsize before split.
Update pipeline and d71_scaler_update accordingly.

v2: Rebase and addressed Liviu's comments
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Introduce a new component komeda_merger, because D71 HW supports to split
a whole image to two half parts and does the scaling independently. Merger
merges two separate results to one, and output it to compositor or wb_layer
For this patch:
- Add the definition of komeda_merger/merger_state
- Report and initialize komeda_merger according to the D71 HW.

v2: Rebase
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.

But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1

So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

To avoid confusion, unify the driver main engine clk name "mclk" to
the spec name "aclk".
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Current komeda driver uses three dedicated clks for a specific purpose:
- mclk: main engine clock
- pclk: APB clock
- pipeline->aclk: AXI clock.

But per spec the komeda HW only has three input clks:
- ACLK: used for AXI masters, APB slave and most pipeline processing
- PXCLK for pipeline 0: output pixel clock for pipeline 0
- PXCLK for pipeline 1: output pixel clock for pipeline 1

So one ACLK is enough, no need to split it to three mclk/pclk/axiclk.
drop pclk/pipeline->axiclk. but only keep one mclk in komeda driver.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

- Creates the zpos property.
- Implement komeda_crtc_normalize_zpos to replace
drm_atomic_normalize_zpos, reasons as the following:

1. The drm_atomic_normalize_zpos allows to configure same zpos for
different planes, but komeda doesn't support such configuration.
2. For further slave pipline case, Komeda need to calculate the
max_slave_zorder, we will merge such calculation into
komed_crtc_normalize_zpos to save a separated plane_state loop.
3. For feature none-scaling layer_split, which a plane_state will be
assigned to two individual layers(left/right), which requires two
normalize_zpos for this plane, plane_st->normalize_zpos will be used
by left layer, normalize_zpos + 1 for right_layer.

This patch series depends on:
- https://patchwork.freedesktop.org/series/58710/
- https://patchwork.freedesktop.org/series/59000/
- https://patchwork.freedesktop.org/series/59002/
- https://patchwork.freedesktop.org/series/59747/
- https://patchwork.freedesktop.org/series/59915/
- https://patchwork.freedesktop.org/series/60083/
- https://patchwork.freedesktop.org/series/60698/Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to
compatible with such block format.
- Since DRM introduced a general block information to drm_format_info,
  the format_caps->tiled_size no long needed, delete it.
- Build some fb utils functions for code sharing.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Add komeda_fb_check_src_coords and check if the layer configured src
rect can meet the requirement of fb and fb format.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Updates the device-tree doc about how to enable SMMU by devicetree.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Adds iommu_connect and disconnect for SMMU support, and configures
TBU translation once SMMU has been attached to the display device.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
[fixed checking of error code returned by dp_wait_cond() and removed
extraneous DRM_ERROR() calls]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Adds color-encoding properties if layer can support YUV format.
Updates HW YUV-RGB matrix state according to the color-encoding
properties.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Updates HW up-sampling method according to the format type.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Komeda series hardware doesn't support Rot90 for AFBC wide block. So
add limitation check to reject it if such configuration has been posted.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

- Adds rotation property to plane.
- Komeda display rotation support diverges from the specific formats,
so need to check the user required rotation type with the format caps
and reject the commit if it can not be supported.
- In the layer validate flow, sets the rotation value to the layer
state. If r90 or r270, swap the width and height of the data flow
for next stage.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

Besides clearing the input ID to zero, D71 compiz also has input
enable bit in CU_INPUTx_CONTROL which need to be cleared.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>