- 28 Feb, 2013 31 commits
-
-
Bjorn Helgaas authored
commit 4fa3e78b upstream. A bus_type has a list of devices (klist_devices), but the list and the subsys_private structure that contains it are not initialized until the bus_type is registered with bus_register(). The panic/reboot path has fixups that look up devices in pci_bus_type. If we panic before registering pci_bus_type, the bus_type exists but the list does not, so mach_reboot_fixups() trips over a null pointer and panics again: mach_reboot_fixups pci_get_device .. bus_find_device(&pci_bus_type, ...) bus->p is NULL Joonsoo reported a problem when panicking before PCI was initialized. I think this patch should be sufficient to replace the patch he posted here: https://lkml.org/lkml/2012/12/28/75 ("[PATCH] x86, reboot: skip reboot_fixups in early boot phase") Reported-by:
Joonsoo Kim <js1304@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minchan Kim authored
commit 7e5a5104 upstream. Now zram allocates new page with GFP_KERNEL in zram I/O path if IO is partial. Unfortunately, It may cause deadlock with reclaim path like below. write_page from fs fs_lock allocation(GFP_KERNEL) reclaim pageout write_page from fs fs_lock <-- deadlock This patch fixes it by using GFP_NOIO. In read path, we reorganize code flow so that kmap_atomic is called after the GFP_NOIO allocation. Acked-by:
Jerome Marchand <jmarchand@redhat.com> Acked-by:
Nitin Gupta <ngupta@vflare.org> [ penberg@kernel.org: don't use GFP_ATOMIC ] Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
George Spelvin authored
commit d953e0e8 upstream. Remove the cdev from the system (with cdev_del) *before* deallocating it (in pps_device_destruct, called via kobject_put from device_destroy). Also prevent deallocating a device with open file handles. A better long-term fix is probably to remove the cdev from the pps_device entirely, and instead have all devices reference one global cdev. Then the deallocation ordering becomes simpler. But that's more complex and invasive change, so we leave that for later. Signed-off-by:
George Spelvin <linux@horizon.com> Acked-by:
Rodolfo Giometti <giometti@enneenne.com> Signed-off-by:
-
George Spelvin authored
commit 03a7ffe4 upstream. Now that N_TTY uses tty->disc_data for its private data, 'subclass' ldiscs cannot use ->disc_data for their own private data. (This is a regression is v3.8-rc1) Use pps_lookup_dev to associate the tty with the pps source instead. This fixes a crashing regression in 3.8-rc1. Signed-off-by:
-
George Spelvin authored
commit 513b032c upstream. The PPS serial line discipline wants to attach a PPS device to a tty without changing the tty code to add a struct pps_device * pointer. Since the number of PPS devices in a typical system is generally very low (n=1 is by far the most common), it's practical to search the entire list of allocated pps devices. (We capture the timestamp before the lookup, so the timing isn't affected.) It is a bit ugly that this function, which is part of the in-kernel PPS API, has to be in pps.c as opposed to kapi,c, but that's not something that affects users. Signed-off-by:
-
Wei Liu authored
commit e7e44e44 upstream. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Stefan Bader authored
commit 76eaca03 upstream. There is a loophole between Xen's current implementation of pv-spinlocks and the scheduler. This was triggerable through a testcase until v3.6 changed the TLB flushing code. The problem potentially is still there just not observable in the same way. What could happen was (is): 1. CPU n tries to schedule task x away and goes into a slow wait for the runq lock of CPU n-# (must be one with a lower number). 2. CPU n-#, while processing softirqs, tries to balance domains and goes into a slow wait for its own runq lock (for updating some records). Since this is a spin_lock_irqsave in softirq context, interrupts will be re-enabled for the duration of the poll_irq hypercall used by Xen. 3. Before the runq lock of CPU n-# is unlocked, CPU n-1 receives an interrupt (e.g. endio) and when processing the interrupt, tries to wake up task x. But that is in schedule and still on_cpu, so try_to_wake_up goes into a tight loop. 4. The runq lock of CPU n-# gets unlocked, but the message only gets sent to the first waiter, which is CPU n-# and that is busily stuck. 5. CPU n-# never returns from the nested interruption to take and release the lock because the scheduler uses a busy wait. And CPU n never finishes the task migration because the unlock notification only went to CPU n-#. To avoid this and since the unlocking code has no real sense of which waiter is best suited to grab the lock, just send the IPI to all of them. This causes the waiters to return from the hyper- call (those not interrupted at least) and do active spinlocking. BugLink: http://bugs.launchpad.net/bugs/1011792Acked-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Nicolas Pitre authored
commit a883b70d upstream. Commit 81732c3b ("tty vt: Fix line garbage in virtual console on command line edition") broke insert_char() in multiple ways. Then commit b1a925f4 ("tty vt: Fix a regression in command line edition") partially fixed it. However, the buffer being moved is still too large and overflowing beyond the end of the current line, corrupting existing characters on the next line. Example test case: echo -e "abc\nde\x1b[A\x1b[4h \x1b[4l\x1b[B" Expected result: ab c de Current result: ab c e Needless to say that this is very annoying when inserting words in the middle of paragraphs with certain text editors. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jussi Kivilinna authored
commit bc6b8923 upstream. rtlwifi allocates both setup_packet and data buffer of control message urb, using shared kmalloc in _usbctrl_vendorreq_async_write. Structure used for allocating is: struct { u8 data[254]; struct usb_ctrlrequest dr; }; Because 'struct usb_ctrlrequest' is __packed, setup packet is unaligned and DMA mapping of both 'data' and 'dr' confuses ARM/sunxi, leading to memory corruptions and freezes. Patch changes setup packet to be allocated separately. [v2]: - Use WARN_ON_ONCE instead of WARN_ON Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Larry Finger authored
commit 8708aac7 upstream. A new model of the RTL8188CUS has appeared. Reported-and-tested-by:
Thomas Rosenkrantz <tom.rosary@googlemail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
commit 957f4aca upstream. When the new_id entry in /sysfs is used for a foreign USB device, rtlwifi BUGS with a NULL pointer dereference because the per-driver configuration data is not available. The probe function has been restructured as suggested by Ben Hutchings <bhutchings@solarflare.com>. Signed-off-by:
-
Larry Finger authored
commit ccae0e50 upstream. Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G were due to overflow of the RX DMA ring buffer, which was created with 64 slots. That finding reminded me that I was seeing similar crashed on a netbook, which also has a relatively slow processor. After increasing the number of slots to 128, runs on the netbook that previously failed now worked; however, I found that 109 slots had been used in one test. For that reason, the number of slots is being increased to 256. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michael Chan authored
commit 85f02440 upstream. It was mistakenly defined to be 24 instead of the next higher number 25. Reported-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Stephen Hurd <shurd@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Thomas Gleixner authored
commit 677fe555 upstream. commit 9ec1882d (tty: serial: imx: console write routing is unsafe on SMP) introduced a recursive locking bug in imx_console_write(). The callchain is: imx_rxint() spin_lock_irqsave(&sport->port.lock,flags); ... uart_handle_sysrq_char(); sysrq_function(); printk(); imx_console_write(); spin_lock_irqsave(&sport->port.lock,flags); <--- DEAD The bad news is that the kernel debugging facilities can dectect the problem, but the printks never surface on the serial console for obvious reasons. There is a similar issue with oops_in_progress. If the kernel crashes we really don't want to be stuck on the lock and unable to tell what happened. In general most UP originated drivers miss these checks and nobody ever notices because CONFIG_PROVE_LOCKING seems to be still ignored by a large number of developers. The solution is to avoid locking in the sysrq case and trylock in the oops_in_progress case. This scheme is used in other drivers as well and it would be nice if we could move this to a common place, so the usual copy/paste/modify bugs can be avoided. Now there is another issue with this scheme: CPU0 CPU1 printk() rxint() sysrq_detection() -> sets port->sysrq return from interrupt console_write() if (port->sysrq) avoid locking port->sysrq is reset with the next receive character. So as long as the port->sysrq is not reset and this can take an endless amount of time if after the break no futher receive character follows, all console writes happen unlocked. While the current writer is protected against other console writers by the console sem, it's unprotected against open/close or other operations which fiddle with the port. That's what the above mentioned commit tried to solve. That's an issue in all drivers which use that scheme and unfortunately there is no easy workaround. The only solution is to have a separate indicator port->sysrq_cpu. uart_handle_sysrq_char() then sets it to smp_processor_id() before calling into handle_sysrq() and resets it to -1 after that. Then change the locking check to: if (port->sysrq_cpu == smp_processor_id()) locked = 0; else if (oops_in_progress) locked = spin_trylock_irqsave(port->lock, flags); else spin_lock_irqsave(port->lock, flags); That would force all other cpus into the spin_lock path. Problem solved, but that's way beyond the scope of this fix and really wants to be implemented in a common function which calls the uart specific write function to avoid another gazillion of hard to debug copy/paste/modify bugs. Reported-and-tested-by:
Tim Sander <tim@krieglstein.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Johan Hovold authored
commit b2ca6990 upstream. Make sure serial-driver dtr_rts is called with disc_mutex held after checking the disconnected flag. Due to a bug in the tty layer, dtr_rts may get called after a device has been disconnected and the tty-device unregistered. Some drivers have had individual checks for disconnect to make sure the disconnected interface was not accessed, but this should really be handled in usb-serial core (at least until the long-standing tty-bug has been fixed). Note that the problem has been made more acute with commit 0998d063 ("device-core: Ensure drvdata = NULL when no driver is bound") as the port data is now also NULL when dtr_rts is called resulting in further oopses. Reported-by:
Chris Ruehl <chris.ruehl@gtsys.com.hk> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Oleg Nesterov authored
commit 183d95cd upstream. See https://bugzilla.redhat.com/show_bug.cgi?id=904907 read command causes bash to abort with double free or corruption (out). A simple test-case from Roman: // Compile the reproducer and send sigchld ti that process. // EINTR occurs even if SA_RESTART flag is set. void handler(int sig) { } main() { struct sigaction act; act.sa_handler = handler; act.sa_flags = SA_RESTART; sigaction (SIGCHLD, &act, 0); struct termio ttp; ioctl(0, TCGETA, &ttp); while(1) { if (ioctl(0, TCSETAW, ttp) < 0) { if (errno == EINTR) { fprintf(stderr, "BUG!"); return(1); } } } } Change set_termios/set_termiox to return -ERESTARTSYS to fix this particular problem. I didn't dare to change other EINTR's in drivers/tty/, but they look equally wrong. Reported-by:
Roman Rakus <rrakus@redhat.com> Reported-by:
Lingzhu Xiang <lxiang@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Dirkjan Bussink authored
commit 4d9b1090 upstream. This change fixes a deadlock when the multiplexer is closed while there are still client side ports open. When the multiplexer is closed and there are active tty's it tries to close them with tty_vhangup. This has a problem though, because tty_vhangup needs the tty_lock. This patch changes it to unlock the tty_lock before attempting the hangup and relocks afterwards. The additional call to tty_port_tty_set is needed because otherwise the port stays active because of the reference counter. This change also exposed another problem that other code paths don't expect that the multiplexer could have been closed. This patch also adds checks for these cases in the gsmtty_ class of function that could be called. The documentation explicitly states that "first close all virtual ports before closing the physical port" but we've found this to not always reality in our field situations. The GPRS / UTMS modem sometimes crashes and needs a power cycle in that case which means cleanly shutting down everything is not always possible. This change makes it much more robust for our situation where at least the system is recoverable with this patch and doesn't hang in a deadlock situation inside the kernel. The patch is against the long term support kernel (3.4.27) and should apply cleanly to more recent branches. Tested with a Telit GE864-QUADV2 and Telit HE910 modem. Signed-off-by:
Dirkjan Bussink <dirkjan.bussink@nedap.com> Signed-off-by:
-
Takashi Iwai authored
commit edac8943 upstream. snd-aloop driver has no proper PM implementation, thus the PM resume may trigger Oops due to leftover timer instance. This patch adds the missing suspend/resume implementation. Reported-and-tested-by:
El boulangero <elboulangero@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Denis Efremov authored
commit f49a59c4 upstream. According to the other code in this driver and similar code in rme96 it seems, that spin_lock_irq in snd_rme32_capture_close function should be paired with spin_unlock_irq. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Denis Efremov <yefremov.denis@gmail.com> Signed-off-by:
-
Denis Efremov authored
commit dacae5a1 upstream. snd_ali_pointer function is called with local interrupts disabled. However it seems very strange to reenable them in such way. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Konstantin Khlebnikov authored
commit 1438ade5 upstream. commit d8e794df ("workqueue: set delayed_work->timer function on initialization") exports function delayed_work_timer_fn() only for GPL modules. This makes delayed-works unusable for non-GPL modules, because initialization macro now requires GPL symbol. For example schedule_delayed_work() available for non-GPL. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Olaf Hering authored
commit 32068f65 upstream. Enable hyperv_clocksource only if its advertised as a feature. XenServer 6 returns the signature which is checked in ms_hyperv_platform(), but it does not offer all features. Currently the clocksource is enabled unconditionally in ms_hyperv_init_platform(), and the result is a hanging guest. Hyper-V spec Bit 1 indicates the availability of Partition Reference Counter. Register the clocksource only if this bit is set. The guest in question prints this in dmesg: [ 0.000000] Hypervisor detected: Microsoft HyperV [ 0.000000] HyperV: features 0x70, hints 0x0 This bug can be reproduced easily be setting 'viridian=1' in a HVM domU .cfg file. A workaround without this patch is to boot the HVM guest with 'clocksource=jiffies'. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Link: http://lkml.kernel.org/r/1359940959-32168-1-git-send-email-kys@microsoft.comSigned-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Leonid Shatz authored
commit b22affe0 upstream. hrtimer_enqueue_reprogram contains a race which could result in timer.base switch during unlock/lock sequence. hrtimer_enqueue_reprogram is releasing the lock protecting the timer base for calling raise_softirq_irqsoff() due to a lock ordering issue versus rq->lock. If during that time another CPU calls __hrtimer_start_range_ns() on the same hrtimer, the timer base might switch, before the current CPU can lock base->lock again and therefor the unlock_timer_base() call will unlock the wrong lock. [ tglx: Added comment and massaged changelog ] Signed-off-by:
Leonid Shatz <leonid.shatz@ravellosystems.com> Signed-off-by:
Izik Eidus <izik.eidus@ravellosystems.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/1359981217-389-1-git-send-email-izik.eidus@ravellosystems.comSigned-off-by:
-
Stanislaw Gruszka authored
commit e6c42c29 upstream. The trinity fuzzer triggered a task_struct reference leak via clock_nanosleep with CPU_TIMERs. do_cpu_nanosleep() calls posic_cpu_timer_create(), but misses a corresponding posix_cpu_timer_del() which leads to the task_struct reference leak. Reported-and-tested-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20130215100810.GF4392@redhat.comSigned-off-by:
-
Thomas Gleixner authored
commit e716efde upstream. commit 52553ddf(genirq: fix regression in irqfixup, irqpoll) introduced a potential deadlock by calling the action handler with the irq descriptor lock held. Remove the call and let the handling code run even for an interrupt where only a single action is registered. That matches the goal of the above commit and avoids the deadlock. Document the confusing action = desc->action reload in the handling loop while at it. Reported-and-tested-by:
"Wang, Warner" <warner.wang@hp.com> Tested-by:
Edward Donovan <edward.donovan@numble.net> Cc: "Wang, Song-Bo (Stoney)" <song-bo.wang@hp.com> Signed-off-by:
-
H. Peter Anvin authored
commit 63a3f603 upstream. defined(@array) is deprecated in Perl and gives off a warning. Restructure the code to remove that warning. [ hpa: it would be interesting to revert to the timeconst.bc script. It appears that the failures reported by akpm during testing of that script was due to a known broken version of make, not a problem with bc. The Makefile rules could probably be restructured to avoid the make bug, or it is probably old enough that it doesn't matter. ] Reported-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Jiri Olsa authored
commit c0d246b8 upstream. Currently we don't properly display hist data with symbol_conf.field_sep separator. We need to display either space or separator. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-cyggwys0bz5kqdowwvfd8h72@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Vinson Lee authored
commit 85df3b37 upstream. The %name-prefix "prefix" syntax is not available on bison 2.3 and older. Substitute with the -p "prefix" command-line option for compatibility with older versions of bison. This patch fixes this build error with older versions of bison. CC util/sysfs.o BISON util/pmu-bison.c util/pmu.y:2.14-24: syntax error, unexpected string, expecting = make: *** [util/pmu-bison.c] Error 1 Signed-off-by:
Vinson Lee <vlee@twitter.com> Tested-by:
Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.comSigned-off-by:
-
H. Peter Anvin authored
commit 07f4207a upstream. We have removed the remap allocator for x86-32, and x86-64 never had it (and doesn't need it). Remove residual reference to it. Reported-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
H. Peter Anvin authored
commit bb112aec upstream. Remove reference to removed function resume_map_numa_kva(). Signed-off-by:
-
Dave Hansen authored
commit f03574f2 upstream. This code was an optimization for 32-bit NUMA systems. It has probably been the cause of a number of subtle bugs over the years, although the conditions to excite them would have been hard to trigger. Essentially, we remap part of the kernel linear mapping area, and then sometimes part of that area gets freed back in to the bootmem allocator. If those pages get used by kernel data structures (say mem_map[] or a dentry), there's no big deal. But, if anyone ever tried to use the linear mapping for these pages _and_ cared about their physical address, bad things happen. For instance, say you passed __GFP_ZERO to the page allocator and then happened to get handed one of these pages, it zero the remapped page, but it would make a pte to the _old_ page. There are probably a hundred other ways that it could screw with things. We don't need to hang on to performance optimizations for these old boxes any more. All my 32-bit NUMA systems are long dead and buried, and I probably had access to more than most people. This code is causing real things to break today: https://lkml.org/lkml/2013/1/9/376 I looked in to actually fixing this, but it requires surgery to way too much brittle code, as well as stuff like per_cpu_ptr_to_phys(). [ hpa: Cc: this for -stable, since it is a memory corruption issue. However, an alternative is to simply mark NUMA as depends BROKEN rather than EXPERIMENTAL in the X86_32 subclause... ] Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.comSigned-off-by:
-
- 18 Feb, 2013 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem fixes from Dmitry Torokhov: "Two small driver fixups and a documentation update for managed input devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix wacom_set_report retry logic Input: document that unregistering managed devices is not necessary Input: lm8323 - fix checking PWM interrupt status
-
Linus Torvalds authored
Commit c060f943 ("mm: use aligned zone start for pfn_to_bitidx calculation") fixed out calculation of the index into the pageblock bitmap when a !SPARSEMEM zome was not aligned to pageblock_nr_pages. However, the _allocation_ of that bitmap had never taken this alignment requirement into accout, so depending on the exact size and alignment of the zone, the use of that index could then access past the allocation, resulting in some very subtle memory corruption. This was reported (and bisected) by Ingo Molnar: one of his random config builds would hang with certain very specific kernel command line options. In the meantime, commit c060f943 has been marked for stable, so this fix needs to be back-ported to the stable kernels that backported the commit to use the right alignment. Bisected-and-tested-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: stable@kernel.org Signed-off-by:
-
- 15 Feb, 2013 6 commits
-
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes: - A simple bug-fix for redundant NULL check. - CVE-2013-0228/XSA-42: x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS and two reverts: - Revert the PVonHVM kexec. The patch introduces a regression with older hypervisor stacks, such as Xen 4.1." * tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen PVonHVM: use E820_Reserved area for shared_info" Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info" xen: remove redundant NULL check before unregister_and_remove_pcpu(). x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
-
Mauro Carvalho Chehab authored
As reported by Klaus Schmidinger: "In VDR I use an ioctl() call with FE_READ_UNCORRECTED_BLOCKS on a device (using stb0899). After this call I check 'errno' for EOPNOTSUPP to determine whether this device supports this call. This used to work just fine, until a few months ago I noticed that my devices using stb0899 didn't display their signal quality in VDR's OSD any more. After further investigation I found that ioctl(FE_READ_UNCORRECTED_BLOCKS) no longer returns EOPNOTSUPP, but rather ENOTTY. And since I stop getting the signal quality in case any unknown errno value appears, this broke my signal quality query function." While the changes reflect what is there at: http://comments.gmane.org/gmane.linux.kernel/1235728 it does cause regression on userspace. So, revert it to stop the damage. This reverts commit 177ffe50 ("[media] dvb_frontend: return -ENOTTY for unimplement IOCTL"). Reported-by:
Klaus Schmidinger <Klaus.Schmidinger@tvdr.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "A couple small fixes for sparc including some THP brown-paper-bag material: 1) During the merging of all the THP support for various architectures, sparc missed adding a HAVE_ARCH_TRANSPARENT_HUGEPAGE to it's Kconfig, oops. 2) Sparc needs to be mindful of hugepages in get_user_pages_fast(). 3) Fix memory leak in SBUS probe, from Cong Ding. 4) The sunvdc virtual disk client driver has a test of the bitmask of vdisk server supported operations which was off by one bit" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: Fix off-by-one in generic_request(). sparc64: Fix get_user_pages_fast() wrt. THP. sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE. sparc: kernel/sbus.c: fix memory leakage -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull one more x86 fix from Peter Anvin: "Sigh. One more patch in the "please don't brick my Samsung" series" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "This is another fix for v3.8. It fixes an oops that happens when a Thunderbolt adapter is unplugged (remove device, poll for PME events on no-longer-existing device, oops)." * tag '3.8-pci-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Clean up PME state when removing a device
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
Pull omapdss fixes from Tomi Valkeinen: "It'd be great if these two late fixes would still make it into 3.8. The other one fixes ARM kernel compilation when using 'allyesconfig', and the other makes DPI displays function again on OMAP3630 boards: - Fix ARM compilation with "allyesconfig" (omapdrm: fix the dependency to omapdss) - fix DPI displays on OMAP3630 (OMAPDSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list)" * tag 'omapdss-for-3.8-rc8' of git://gitorious.org/linux-omap-dss2/linux: omapdrm: fix the dependency to omapdss OMAPDSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list
-
