The callers only expect NULL pointers, so returning an error pointer
will lead to an Oops.

Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a missing shift for the media operation mode selection.
This does not fix the driver as the current operation mode (copper) has
a value of 0, but this wouldn't work for other modes.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In this commit we revert the part of
commit 1a63443a ("net/amazon: Ensure that driver version is aligned to the linux kernel"),
which breaks the interface between the ENA driver and FW.

We also replace the use of DRIVER_VERSION with DRIVER_GENERATION
when we bring back the deleted constants that are used in interface with
ENA device FW.

This commit does not change the driver version reported to the user via
ethtool, which remains the kernel version.

Fixes: 1a63443a ("net/amazon: Ensure that driver version is aligned to the linux kernel")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
mptcp: update mptcp ack sequence outside of recv path

This series moves mptcp-level ack sequence update outside of the recvmsg path.
Current approach has two problems:

1. There is delay between arrival of new data and the time we can ack
   this data.
2. If userspace doesn't call recv for some time, mptcp ack_seq is not
   updated at all, even if this data is queued in the subflow socket
   receive queue.

Move skbs from the subflow socket receive queue to the mptcp-level
receive queue, updating the mptcp-level ack sequence and have recv
take skbs from the mptcp-level receive queue.

The first place where we will attempt to update the mptcp level acks
is from the subflows' data_ready callback, even before we make userspace
aware of new data.

Because of possible deadlock (we need to take the mptcp socket lock
while already holding the subflow sockets lock), we may still need to
defer the mptcp-level ack update.  In such case, this work will be either
done from work queue or recv path, depending on which runs sooner.

In order to avoid pointless scheduling of the work queue, work
will be queued from the mptcp sockets lock release callback.
This allows to detect when the socket owner did drain the subflow
socket receive queue.

Please see individual patches for more information.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't schedule the work queue right away, instead defer this
to the lock release callback.

This has the advantage that it will give recv path a chance to
complete -- this might have moved all pending packets from the
subflow to the mptcp receive queue, which allows to avoid the
schedule_work().
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can't lock_sock() the mptcp socket from the subflow data_ready callback,
it would result in ABBA deadlock with the subflow socket lock.

We can however grab the spinlock: if that succeeds and the mptcp socket
is not owned at the moment, we can process the new skbs right away
without deferring this to the work queue.

This avoids the schedule_work and hence the small delay until the
work item is processed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only used to discard stale data from the subflow, so move
it where needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If userspace never drains the receive buffers we must stop draining
the subflow socket(s) at some point.

This adds the needed rmem accouting for this.
If the threshold is reached, we stop draining the subflows.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If userspace is not reading data, all the mptcp-level acks contain the
ack_seq from the last time userspace read data rather than the most
recent in-sequence value.

This causes pointless retransmissions for data that is already queued.

The reason for this is that all the mptcp protocol level processing
happens at mptcp_recv time.

This adds work queue to move skbs from the subflow sockets receive
queue on the mptcp socket receive queue (which was not used so far).

This allows us to announce the correct mptcp ack sequence in a timely
fashion, even when the application does not call recv() on the mptcp socket
for some time.

We still wake userspace tasks waiting for POLLIN immediately:
If the mptcp level receive queue is empty (because the work queue is
still pending) it can be filled from in-sequence subflow sockets at
recv time without a need to wait for the worker.

The skb_orphan when moving skbs from subflow to mptcp level is needed,
because the destructor (sock_rfree) relies on skb->sk (ssk!) lock
being taken.

A followup patch will add needed rmem accouting for the moved skbs.

Other problem: In case application behaves as expected, and calls
recv() as soon as mptcp socket becomes readable, the work queue will
only waste cpu cycles.  This will also be addressed in followup patches.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Will be extended with functionality in followup patches.
Initial user is moving skbs from subflows receive queue to
the mptcp-level receive queue.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allows us to schedule the work queue to drain the ssk receive queue in
a followup patch.

This is needed to avoid sending all-to-pessimistic mptcp-level
acknowledgements.  At this time, the ack_seq is what was last read by
userspace instead of the highest in-sequence number queued for reading.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Small driver update

This patchset contains couple of patches not related to each other. They
are small optimization and extension changes to the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The buffer factor on Spectrum-3 is larger than on Spectrum-2. Add a new
callback and use it for mlxsw_sp->span_ops on Spectrum-3.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During port initialization the driver instructs the device to only
advertise speeds that can be supported by the port's current width.

Since the device now returns the supported speeds based on the port's
current width, the driver no longer needs to compute the speeds that can
be advertised.

Simplify port initialization by setting the advertised speeds to the
queried supported speeds.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spectrum-1 and Spectrum-2 do not have a per-TC counter of number of packets
marked by ECN. The value reported currently is the total number of marked
packets. Showing this value at individual TC Qdiscs is misleading.

Move the counter to ethtool instead.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, only one SFN query is done from repetitive work at a time,
processing 64 entries. Another work iteration is scheduled in 100ms,
that means that the max rate of learned FDB entries is limited to 6400/s.
That is slow. Fix this by doing 2 optimizations:
1) Run 10 SFN queries at a time.
2) In case the SFN is not drained, schedule work with 0 delay to allow
   to continue processing rest of the records.

On a testing setup with 500K entries the time to process decreased
from 870secs to 10secs.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When debugging via dprintk() is not enabled, make the dprintk()
macro be an empty do-while loop, as is done in
<linux/sunrpc/debug.h>.

This fixes a gcc warning when -Wextra is set:
../net/llc/af_llc.c:974:51: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

I have verified that there is not object code change (with gcc 7.5.0).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2020-02-25

The following series provides some misc updates to mlx5 driver:

1) From Maxim, Refactoring for mlx5e netdev channels recreation flow.
  - Add error handling
  - Add context to the preactivate hook
  - Use preactivate hook with context where it can be used
    and subsequently unify channel recreation flow everywhere.
  - Fix XPS cpumask to not reset upon channel recreation.

2) From Tariq:
  - Use indirect calls wrapper on RX.
  - Check LRO capability bit

3) Multiple small cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Hans Wippel says:

====================
net/smc: improve peer ID in CLC decline

The following two patches improve the peer ID in CLC decline messages if
RoCE devices are present in the host but no suitable device is found for
a connection. The first patch reworks the peer ID initialization. The
second patch contains the actual changes of the CLC decline messages.

Changes v1 -> v2:
* make smc_ib_is_valid_local_systemid() static in first patch
* changed if in smc_clc_send_decline() to remove curly braces

Changes RFC -> v1:
* split the patch into two parts
* removed zero assignment to global variable (thanks Leon)

Thanks to Leon Romanovsky and Karsten Graul for the feedback!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

According to RFC 7609, all CLC messages contain a peer ID that consists
of a unique instance ID and the MAC address of one of the host's RoCE
devices. But if a SMC-R connection cannot be established, e.g., because
no matching pnet table entry is found, the current implementation uses a
zero value in the CLC decline message although the host's peer ID is set
to a proper value.

If no RoCE and no ISM device is usable for a connection, there is no LGR
and the LGR check in smc_clc_send_decline() prevents that the peer ID is
copied into the CLC decline message for both SMC-D and SMC-R. So, this
patch modifies the check to also accept the case of no LGR. Also, only a
valid peer ID is copied into the decline message.
Signed-off-by: Hans Wippel <ndev@hwipl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch initializes the peer ID to a random instance ID and a zero
MAC address. If a RoCE device is in the host, the MAC address part of
the peer ID is overwritten with the respective address. Also, a function
for checking if the peer ID is valid is added. A peer ID is considered
valid if the MAC address part contains a non-zero MAC address.
Signed-off-by: Hans Wippel <ndev@hwipl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP receive zerocopy currently does not update the returned optlen for
getsockopt() if the user passed in a larger than expected value.
Thus, userspace cannot properly determine if all the fields are set in
the passed-in struct. This patch sets the optlen for this case before
returning, in keeping with the expected operation of getsockopt().

Fixes: c8856c05 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christian Brauner says:

====================
net: fix sysfs permssions when device changes network

/* v7 */
This is v7 with a build warning fixup that slipped past me the last
time. It removes to unused variables in sysfs_group_change_owner(). I
observed no warning when building just now.

/* v6 */
This is v6 with two small fixups. I missed adapting the commit message
to reflect the renamed helper for changing the owner of sysfs files and
I also forgot to make the new dpm helper static inline.

/* v5 */
This is v5 with a small fixup requested by Rafael.

/* v4 */
This is v4 with more documentation and other fixes that Greg requested.

/* v3 */
This is v3 with explicit uid and gid parameters added to functions that
change sysfs object ownership as Greg requested.

(I've tagged this with net-next since it's triggered by a bug for
 network device files but it also touches driver core aspects so it's
 not clear-cut. I can of course split this series into separate
 patchsets.)
We have been struggling with a bug surrounding the ownership of network
device sysfs files when moving network devices between network
namespaces owned by different user namespaces reported by multiple
users.

Currently, when moving network devices between network namespaces the
ownership of the corresponding sysfs entries is not changed. This leads
to problems when tools try to operate on the corresponding sysfs files.

I also causes a bug when creating a network device in a network
namespaces owned by a user namespace and moving that network device back
to the host network namespaces. Because when a network device is created
in a network namespaces it will be owned by the root user of the user
namespace and all its associated sysfs files will also be owned by the
root user of the corresponding user namespace.
If such a network device has to be moved back to the host network
namespace the permissions will still be set to the root user of the
owning user namespaces of the originating network namespace. This means
unprivileged users can e.g. re-trigger uevents for such incorrectly
owned devices on the host or in other network namespaces. They can also
modify the settings of the device itself through sysfs when they
wouldn't be able to do the same through netlink. Both of these things
are unwanted.

For example, quite a few workloads will create network devices in the
host network namespace. Other tools will then proceed to move such
devices between network namespaces owner by other user namespaces. While
the ownership of the device itself is updated in
net/core/net-sysfs.c:dev_change_net_namespace() the corresponding sysfs
entry for the device is not. Below you'll find that moving a network
device (here a veth device) from a network namespace into another
network namespaces owned by a different user namespace with a different
id mapping. As you can see the permissions are wrong even though it is
owned by the userns root user after it has been moved and can be
interacted with through netlink:

drwxr-xr-x 5 nobody nobody    0 Jan 25 18:08 .
drwxr-xr-x 9 nobody nobody    0 Jan 25 18:08 ..
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_assign_type
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_len
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 address
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 broadcast
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_changes
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_down_count
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_up_count
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_id
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_port
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dormant
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 duplex
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 flags
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 gro_flush_timeout
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifalias
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifindex
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 iflink
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 link_mode
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 mtu
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 name_assign_type
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 netdev_group
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 operstate
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_id
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_name
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_switch_id
drwxr-xr-x 2 nobody nobody    0 Jan 25 18:09 power
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 proto_down
drwxr-xr-x 4 nobody nobody    0 Jan 25 18:09 queues
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 speed
drwxr-xr-x 2 nobody nobody    0 Jan 25 18:09 statistics
lrwxrwxrwx 1 nobody nobody    0 Jan 25 18:08 subsystem -> ../../../../class/net
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 tx_queue_len
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 type
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:08 uevent

Constrast this with creating a device of the same type in the network
namespace directly. In this case the device's sysfs permissions will be
correctly updated.
(Please also note, that in a lot of workloads this strategy of creating
 the network device directly in the network device to workaround this
 issue can not be used. Either because the network device is dedicated
 after it has been created or because it used by a process that is
 heavily sandboxed and couldn't create network devices itself.):

drwxr-xr-x 5 root   root      0 Jan 25 18:12 .
drwxr-xr-x 9 nobody nobody    0 Jan 25 18:08 ..
-r--r--r-- 1 root   root   4096 Jan 25 18:12 addr_assign_type
-r--r--r-- 1 root   root   4096 Jan 25 18:12 addr_len
-r--r--r-- 1 root   root   4096 Jan 25 18:12 address
-r--r--r-- 1 root   root   4096 Jan 25 18:12 broadcast
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 carrier
-r--r--r-- 1 root   root   4096 Jan 25 18:12 carrier_changes
-r--r--r-- 1 root   root   4096 Jan 25 18:12 carrier_down_count
-r--r--r-- 1 root   root   4096 Jan 25 18:12 carrier_up_count
-r--r--r-- 1 root   root   4096 Jan 25 18:12 dev_id
-r--r--r-- 1 root   root   4096 Jan 25 18:12 dev_port
-r--r--r-- 1 root   root   4096 Jan 25 18:12 dormant
-r--r--r-- 1 root   root   4096 Jan 25 18:12 duplex
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 flags
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 gro_flush_timeout
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 ifalias
-r--r--r-- 1 root   root   4096 Jan 25 18:12 ifindex
-r--r--r-- 1 root   root   4096 Jan 25 18:12 iflink
-r--r--r-- 1 root   root   4096 Jan 25 18:12 link_mode
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 mtu
-r--r--r-- 1 root   root   4096 Jan 25 18:12 name_assign_type
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 netdev_group
-r--r--r-- 1 root   root   4096 Jan 25 18:12 operstate
-r--r--r-- 1 root   root   4096 Jan 25 18:12 phys_port_id
-r--r--r-- 1 root   root   4096 Jan 25 18:12 phys_port_name
-r--r--r-- 1 root   root   4096 Jan 25 18:12 phys_switch_id
drwxr-xr-x 2 root   root      0 Jan 25 18:12 power
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 proto_down
drwxr-xr-x 4 root   root      0 Jan 25 18:12 queues
-r--r--r-- 1 root   root   4096 Jan 25 18:12 speed
drwxr-xr-x 2 root   root      0 Jan 25 18:12 statistics
lrwxrwxrwx 1 nobody nobody    0 Jan 25 18:12 subsystem -> ../../../../class/net
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 tx_queue_len
-r--r--r-- 1 root   root   4096 Jan 25 18:12 type
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 uevent

Now, when creating a network device in a network namespace owned by a
user namespace and moving it to the host the permissions will be set to
the id that the user namespace root user has been mapped to on the host
leading to all sorts of permission issues mentioned above:

458752
drwxr-xr-x 5 458752 458752      0 Jan 25 18:12 .
drwxr-xr-x 9 root   root        0 Jan 25 18:08 ..
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 addr_assign_type
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 addr_len
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 address
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 broadcast
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier_changes
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier_down_count
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier_up_count
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 dev_id
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 dev_port
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 dormant
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 duplex
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 flags
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 gro_flush_timeout
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 ifalias
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 ifindex
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 iflink
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 link_mode
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 mtu
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 name_assign_type
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 netdev_group
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 operstate
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 phys_port_id
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 phys_port_name
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 phys_switch_id
drwxr-xr-x 2 458752 458752      0 Jan 25 18:12 power
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 proto_down
drwxr-xr-x 4 458752 458752      0 Jan 25 18:12 queues
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 speed
drwxr-xr-x 2 458752 458752      0 Jan 25 18:12 statistics
lrwxrwxrwx 1 root   root        0 Jan 25 18:12 subsystem -> ../../../../class/net
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 tx_queue_len
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 type
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 uevent

Fix this by changing the basic sysfs files associated with network
devices when moving them between network namespaces. To this end we add
some infrastructure to sysfs.

The patchset takes care to only do this when the owning user namespaces
changes and the kids differ. So there's only a performance overhead,
when the owning user namespace of the network namespace is different
__and__ the kid mappings for the root user are different for the two
user namespaces:
Assume we have a netdev eth0 which we create in netns1 owned by userns1.
userns1 has an id mapping of 0 100000 100000. Now we move eth0 into
netns2 which is owned by userns2 which also defines an id mapping of 0
100000 100000. In this case sysfs doesn't need updating. The patch will
handle this case and not do any needless work. Now assume eth0 is moved
into netns3 which is owned by userns3 which defines an id mapping of 0
123456 65536. In this case the root user in each namespace corresponds
to different kid and sysfs needs updating.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we moved all the helpers in place and make use netdev_change_owner()
to fixup the permissions when moving network devices between network
namespaces.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a function to change the owner of the queue entries for a network device
when it is moved between network namespaces.

Currently, when moving network devices between network namespaces the
ownership of the corresponding queue sysfs entries are not changed. This leads
to problems when tools try to operate on the corresponding sysfs files. Fix
this.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a function to change the owner of a network device when it is moved
between network namespaces.

Currently, when moving network devices between network namespaces the
ownership of the corresponding sysfs entries is not changed. This leads
to problems when tools try to operate on the corresponding sysfs files.
This leads to a bug whereby a network device that is created in a
network namespaces owned by a user namespace will have its corresponding
sysfs entry owned by the root user of the corresponding user namespace.
If such a network device has to be moved back to the host network
namespace the permissions will still be set to the user namespaces. This
means unprivileged users can e.g. trigger uevents for such incorrectly
owned devices. They can also modify the settings of the device itself.
Both of these things are unwanted.

For example, workloads will create network devices in the host network
namespace. Other tools will then proceed to move such devices between
network namespaces owner by other user namespaces. While the ownership
of the device itself is updated in
net/core/net-sysfs.c:dev_change_net_namespace() the corresponding sysfs
entry for the device is not:

drwxr-xr-x 5 nobody nobody    0 Jan 25 18:08 .
drwxr-xr-x 9 nobody nobody    0 Jan 25 18:08 ..
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_assign_type
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 addr_len
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 address
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 broadcast
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_changes
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_down_count
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 carrier_up_count
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_id
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dev_port
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 dormant
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 duplex
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 flags
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 gro_flush_timeout
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifalias
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 ifindex
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 iflink
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 link_mode
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 mtu
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 name_assign_type
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 netdev_group
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 operstate
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_id
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_port_name
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 phys_switch_id
drwxr-xr-x 2 nobody nobody    0 Jan 25 18:09 power
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 proto_down
drwxr-xr-x 4 nobody nobody    0 Jan 25 18:09 queues
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 speed
drwxr-xr-x 2 nobody nobody    0 Jan 25 18:09 statistics
lrwxrwxrwx 1 nobody nobody    0 Jan 25 18:08 subsystem -> ../../../../class/net
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:09 tx_queue_len
-r--r--r-- 1 nobody nobody 4096 Jan 25 18:09 type
-rw-r--r-- 1 nobody nobody 4096 Jan 25 18:08 uevent

However, if a device is created directly in the network namespace then
the device's sysfs permissions will be correctly updated:

drwxr-xr-x 5 root   root      0 Jan 25 18:12 .
drwxr-xr-x 9 nobody nobody    0 Jan 25 18:08 ..
-r--r--r-- 1 root   root   4096 Jan 25 18:12 addr_assign_type
-r--r--r-- 1 root   root   4096 Jan 25 18:12 addr_len
-r--r--r-- 1 root   root   4096 Jan 25 18:12 address
-r--r--r-- 1 root   root   4096 Jan 25 18:12 broadcast
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 carrier
-r--r--r-- 1 root   root   4096 Jan 25 18:12 carrier_changes
-r--r--r-- 1 root   root   4096 Jan 25 18:12 carrier_down_count
-r--r--r-- 1 root   root   4096 Jan 25 18:12 carrier_up_count
-r--r--r-- 1 root   root   4096 Jan 25 18:12 dev_id
-r--r--r-- 1 root   root   4096 Jan 25 18:12 dev_port
-r--r--r-- 1 root   root   4096 Jan 25 18:12 dormant
-r--r--r-- 1 root   root   4096 Jan 25 18:12 duplex
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 flags
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 gro_flush_timeout
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 ifalias
-r--r--r-- 1 root   root   4096 Jan 25 18:12 ifindex
-r--r--r-- 1 root   root   4096 Jan 25 18:12 iflink
-r--r--r-- 1 root   root   4096 Jan 25 18:12 link_mode
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 mtu
-r--r--r-- 1 root   root   4096 Jan 25 18:12 name_assign_type
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 netdev_group
-r--r--r-- 1 root   root   4096 Jan 25 18:12 operstate
-r--r--r-- 1 root   root   4096 Jan 25 18:12 phys_port_id
-r--r--r-- 1 root   root   4096 Jan 25 18:12 phys_port_name
-r--r--r-- 1 root   root   4096 Jan 25 18:12 phys_switch_id
drwxr-xr-x 2 root   root      0 Jan 25 18:12 power
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 proto_down
drwxr-xr-x 4 root   root      0 Jan 25 18:12 queues
-r--r--r-- 1 root   root   4096 Jan 25 18:12 speed
drwxr-xr-x 2 root   root      0 Jan 25 18:12 statistics
lrwxrwxrwx 1 nobody nobody    0 Jan 25 18:12 subsystem -> ../../../../class/net
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 tx_queue_len
-r--r--r-- 1 root   root   4096 Jan 25 18:12 type
-rw-r--r-- 1 root   root   4096 Jan 25 18:12 uevent

Now, when creating a network device in a network namespace owned by a
user namespace and moving it to the host the permissions will be set to
the id that the user namespace root user has been mapped to on the host
leading to all sorts of permission issues:

458752
drwxr-xr-x 5 458752 458752      0 Jan 25 18:12 .
drwxr-xr-x 9 root   root        0 Jan 25 18:08 ..
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 addr_assign_type
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 addr_len
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 address
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 broadcast
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier_changes
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier_down_count
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 carrier_up_count
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 dev_id
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 dev_port
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 dormant
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 duplex
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 flags
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 gro_flush_timeout
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 ifalias
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 ifindex
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 iflink
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 link_mode
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 mtu
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 name_assign_type
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 netdev_group
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 operstate
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 phys_port_id
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 phys_port_name
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 phys_switch_id
drwxr-xr-x 2 458752 458752      0 Jan 25 18:12 power
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 proto_down
drwxr-xr-x 4 458752 458752      0 Jan 25 18:12 queues
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 speed
drwxr-xr-x 2 458752 458752      0 Jan 25 18:12 statistics
lrwxrwxrwx 1 root   root        0 Jan 25 18:12 subsystem -> ../../../../class/net
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 tx_queue_len
-r--r--r-- 1 458752 458752   4096 Jan 25 18:12 type
-rw-r--r-- 1 458752 458752   4096 Jan 25 18:12 uevent
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper to change the owner of a device's power entries. This
needs to happen when the ownership of a device is changed, e.g. when
moving network devices between network namespaces.
This function will be used to correctly account for ownership changes,
e.g. when moving network devices between network namespaces.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper to change the owner of a device's sysfs entries. This
needs to happen when the ownership of a device is changed, e.g. when
moving network devices between network namespaces.
This function will be used to correctly account for ownership changes,
e.g. when moving network devices between network namespaces.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper to change the owner of sysfs objects.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.

This mirrors how a kobject is added through driver core which in its guts is
done via kobject_add_internal() which in summary creates the main directory via
create_dir(), populates that directory with the groups associated with the
ktype of the kobject (if any) and populates the directory with the basic
attributes associated with the ktype of the kobject (if any). These are the
basic steps that are associated with adding a kobject in sysfs.
Any additional properties are added by the specific subsystem itself (not by
driver core) after it has registered the device. So for the example of network
devices, a network device will e.g. register a queue subdirectory under the
basic sysfs directory for the network device and than further subdirectories
within that queues subdirectory.  But that is all specific to network devices
and they call the corresponding sysfs functions to do that directly when they
create those queue objects. So anything that a subsystem adds outside of what
driver core does must also be changed by it (That's already true for removal of
files it created outside of driver core.) and it's the same for ownership
changes.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add helpers to change the owner of sysfs groups.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper to change the owner of a sysfs link.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add helpers to change the owner of a sysfs files.
This function will be used to correctly account for kobject ownership
changes, e.g. when moving network devices between network namespaces.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

Lastly, fix the following checkpatch warning:
CHECK: Prefer kernel type 'u32' over 'u_int32_t'
#61: FILE: drivers/net/ethernet/cisco/enic/vnic_devcmd.h:653:
+	u_int32_t val[];

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was detected with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 7458bd54 ("net: dsa:
bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278") as it causes
advanced congestion buffering issues with 7278 switch devices when using
their internal Giabit PHY. While this is being debugged, continue with
conservative defaults that work and do not cause packet loss.

Fixes: 7458bd54 ("net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Looks like the iavf code actually experienced a race condition, when a
developer took code before the check for chain 0 was put to helper.
So use tc_cls_can_offload_and_chain0() helper instead of direct check and
move the check to _cb() so this is similar to i40e code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Return NULL instead of 0.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>