- 08 Jun, 2021 4 commits
-
-
Nicolas Dichtel authored
My initial goal was to fix the default MTU, which is set to 65536, ie above the maximum defined in the driver: 65535 (ETH_MAX_MTU). In fact, it's seems more consistent, wrt min_mtu, to set the max_mtu to IP6_MAX_MTU (65535 + sizeof(struct ipv6hdr)) and use it by default. Let's also, for consistency, set the mtu in vrf_setup(). This function calls ether_setup(), which set the mtu to 1500. Thus, the whole mtu config is done in the same function. Before the patch: $ ip link add blue type vrf table 1234 $ ip link list blue 9: blue: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether fa:f5:27:70:24:2a brd ff:ff:ff:ff:ff:ff $ ip link set dev blue mtu 65535 $ ip link set dev blue mtu 65536 Error: mtu greater than device maximum. Fixes: 5055376a ("net: vrf: Fix ping failed when vrf mtu is set to 0") CC: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
gushengxian authored
The preposition "for" should be changed to preposition "of". Signed-off-by:
gushengxian <gushengxian@yulong.com> Signed-off-by:
-
Zheng Yongjun authored
When 'nla_parse_nested_deprecated' failed, it's no need to BUG() here, return -EINVAL is ok. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Nanyong Sun authored
Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource. Fixes: 96cb8e33 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Nanyong Sun <sunnanyong@huawei.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
- 07 Jun, 2021 7 commits
-
-
David Ahern authored
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to fill up the neighbour table with enough entries that it will overflow for valid connections after that. This behaviour is more prevalent after commit 58956317 ("neighbor: Improve garbage collection") is applied, as it prevents removal from entries that are not NUD_FAILED, unless they are more than 5s old. Fixes: 58956317 (neighbor: Improve garbage collection) Reported-by:
Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Pavel Skripkin authored
In commit c47cc304 ("net: kcm: fix memory leak in kcm_sendmsg") I misunderstood the root case of the memory leak and came up with completely broken fix. So, simply revert this commit to avoid GPF reported by syzbot. Im so sorry for this situation. Fixes: c47cc304 ("net: kcm: fix memory leak in kcm_sendmsg") Reported-by: syzbot+65badd5e74ec62cb67dc@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'mlxsw-fixes' Ido Schimmel says: ==================== mlxsw: Thermal and qdisc fixes Patches #1-#2 fix wrong validation of burst size in qdisc code and a user triggerable WARN_ON(). Patch #3 fixes a regression in thermal monitoring of transceiver modules and gearboxes. ==================== Signed-off-by: -
Mykola Kostenok authored
Thermal polling delay argument for modules and gearboxes thermal zones used to be initialized with zero value, while actual delay was used to be set by mlxsw_thermal_set_mode() by thermal operation callback set_mode(). After operations set_mode()/get_mode() have been removed by cited commits, modules and gearboxes thermal zones always have polling time set to zero and do not perform temperature monitoring. Set non-zero "polling_delay" in thermal_zone_device_register() routine, thus, the relevant thermal zones will perform thermal monitoring. Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Fixes: 5d7bd8aa ("thermal: Simplify or eliminate unnecessary set_mode() methods") Fixes: 1ee14820 ("thermal: remove get_mode() operation of drivers") Signed-off-by:
Mykola Kostenok <c_mykolak@nvidia.com> Acked-by:
Vadim Pasternak <vadimp@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Petr Machata authored
In mlxsw Qdisc offload, find_class() is an operation that yields a qdisc offload descriptor given a parental qdisc descriptor and a class handle. In __mlxsw_sp_qdisc_ets_graft() however, a band number is passed to that function instead of a handle. This can lead to a trigger of a WARN_ON with the following splat: WARNING: CPU: 3 PID: 808 at drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c:1356 __mlxsw_sp_qdisc_ets_graft+0x115/0x130 [mlxsw_spectrum] [...] Call Trace: mlxsw_sp_setup_tc_prio+0xe3/0x100 [mlxsw_spectrum] qdisc_offload_graft_helper+0x35/0xa0 prio_graft+0x176/0x290 [sch_prio] qdisc_graft+0xb3/0x540 tc_modify_qdisc+0x56a/0x8a0 rtnetlink_rcv_msg+0x12c/0x370 netlink_rcv_skb+0x49/0xf0 netlink_unicast+0x1f6/0x2b0 netlink_sendmsg+0x1fb/0x410 ____sys_sendmsg+0x1f3/0x220 ___sys_sendmsg+0x70/0xb0 __sys_sendmsg+0x54/0xa0 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae Since the parent handle is not passed with the offload information, compute it from the band number and qdisc handle. Fixes: 28052e618b04 ("mlxsw: spectrum_qdisc: Track children per qdisc") Reported-by:Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Petr Machata authored
A max-shaper is the HW component responsible for delaying egress traffic above a configured transmission rate. Burst size is the amount of traffic that is allowed to pass without accounting. The burst size value needs to be such that it can be expressed as 2^BS * 512 bits, where BS lies in a certain ASIC-dependent range. mlxsw enforces that this holds before attempting to configure the shaper. The assumption for Spectrum-3 was that the lower limit of BS would be 5, like for Spectrum-1. But as of now, the limit is still 11. Therefore fix the driver accordingly, so that incorrect values are rejected early with a proper message. Fixes: 23effa24 ("mlxsw: reg: Add max_shaper_bs to QoS ETS Element Configuration") Reported-by:
-
Ido Schimmel authored
When get_module_eeprom_by_page() is not implemented by the driver, NULL pointer dereference can occur [1]. Fix by testing if get_module_eeprom_by_page() is implemented instead of get_module_info(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 0 PID: 251 Comm: ethtool Not tainted 5.13.0-rc3-custom-00940-g3822d067 #989 Call Trace: eeprom_prepare_data+0x101/0x2d0 ethnl_default_doit+0xc2/0x290 genl_family_rcv_msg_doit+0xdc/0x140 genl_rcv_msg+0xd7/0x1d0 netlink_rcv_skb+0x49/0xf0 genl_rcv+0x1f/0x30 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x1f9/0x400 __sys_sendto+0xe1/0x130 __x64_sys_sendto+0x1b/0x20 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c97a31f6 ("ethtool: wire in generic SFP module access") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
- 04 Jun, 2021 19 commits
-
-
Rahul Lakkireddy authored
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2b ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by:Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Yunjian Wang authored
The commit ae81feb7 ("sch_htb: fix null pointer dereference on a null new_q") fixes a NULL pointer dereference bug, but it is not correct. Because htb_graft_helper properly handles the case when new_q is NULL, and after the previous patch by skipping this call which creates an inconsistency : dev_queue->qdisc will still point to the old qdisc, but cl->parent->leaf.q will point to the new one (which will be noop_qdisc, because new_q was NULL). The code is based on an assumption that these two pointers are the same, so it can lead to refcount leaks. The correct fix is to add a NULL pointer check to protect qdisc_refcount_inc inside htb_parent_to_leaf_offload. Fixes: ae81feb7 ("sch_htb: fix null pointer dereference on a null new_q") Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Suggested-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-06-04 This series contains updates to virtchnl header file and ice driver. Brett fixes VF being unable to request a different number of queues then allocated and adds clearing of VF_MBX_ATQLEN register for VF reset. Haiyue handles error of rebuilding VF VSI during reset. Paul fixes reporting of autoneg to use the PHY capabilities. Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be transmitted. Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs structure in the virtchnl header file. ==================== Signed-off-by: -
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.13-rc5 Here are bug fixes to WireGuard for 5.13-rc5: 1-2,6) These are small, trivial tweaks to our test harness. 3) Linus thinks -O3 is still dangerous to enable. The code gen wasn't so much different with -O2 either. 4) We were accidentally calling synchronize_rcu instead of synchronize_net while holding the rtnl_lock, resulting in some rather large stalls that hit production machines. 5) Peer allocation was wasting literally hundreds of megabytes on real world deployments, due to oddly sized large objects not fitting nicely into a kmalloc slab. 7-9) We move from an insanely expensive O(n) algorithm to a fast O(1) algorithm, and cleanup a massive memory leak in the process, in which allowed ips churn would leave danging nodes hanging around without cleanup until the interface was removed. The O(1) algorithm eliminates packet stalls and high latency issues, in addition to bringing operations that took as much as 10 minutes down to less than a second. ==================== Signed-off-by: -
Jason A. Donenfeld authored
When removing single nodes, it's possible that that node's parent is an empty intermediate node, in which case, it too should be removed. Otherwise the trie fills up and never is fully emptied, leading to gradual memory leaks over time for tries that are modified often. There was originally code to do this, but was removed during refactoring in 2016 and never reworked. Now that we have proper parent pointers from the previous commits, we can implement this properly. In order to reduce branching and expensive comparisons, we want to keep the double pointer for parent assignment (which lets us easily chain up to the root), but we still need to actually get the parent's base address. So encode the bit number into the last two bits of the pointer, and pack and unpack it as needed. This is a little bit clumsy but is the fastest and less memory wasteful of the compromises. Note that we align the root struct here to a minimum of 4, because it's embedded into a larger struct, and we're relying on having the bottom two bits for our flag, which would only be 16-bit aligned on m68k. The existing macro-based helpers were a bit unwieldy for adding the bit packing to, so this commit replaces them with safer and clearer ordinary functions. We add a test to the randomized/fuzzer part of the selftests, to free the randomized tries by-peer, refuzz it, and repeat, until it's supposed to be empty, and then then see if that actually resulted in the whole thing being emptied. That combined with kmemcheck should hopefully make sure this commit is doing what it should. Along the way this resulted in various other cleanups of the tests and fixes for recent graphviz. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
The previous commit moved from O(n) to O(1) for removal, but in the process introduced an additional pointer member to a struct that increased the size from 60 to 68 bytes, putting nodes in the 128-byte slab. With deployed systems having as many as 2 million nodes, this represents a significant doubling in memory usage (128 MiB -> 256 MiB). Fix this by using our own kmem_cache, that's sized exactly right. This also makes wireguard's memory usage more transparent in tools like slabtop and /proc/slabinfo. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
Previously, deleting peers would require traversing the entire trie in order to rebalance nodes and safely free them. This meant that removing 1000 peers from a trie with a half million nodes would take an extremely long time, during which we're holding the rtnl lock. Large-scale users were reporting 200ms latencies added to the networking stack as a whole every time their userspace software would queue up significant removals. That's a serious situation. This commit fixes that by maintaining a double pointer to the parent's bit pointer for each node, and then using the already existing node list belonging to each peer to go directly to the node, fix up its pointers, and free it with RCU. This means removal is O(1) instead of O(n), and we don't use gobs of stack. The removal algorithm has the same downside as the code that it fixes: it won't collapse needlessly long runs of fillers. We can enhance that in the future if it ever becomes a problem. This commit documents that limitation with a TODO comment in code, a small but meaningful improvement over the prior situation. Currently the biggest flaw, which the next commit addresses, is that because this increases the node size on 64-bit machines from 60 bytes to 68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up using twice as much memory per node, because of power-of-two allocations, which is a big bummer. We'll need to figure something out there. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
The randomized trie tests weren't initializing the dummy peer list head, resulting in a NULL pointer dereference when used. Fix this by initializing it in the randomized trie test, just like we do for the static unit test. While we're at it, all of the other strings like this have the word "self-test", so add it to the missing place here. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
With deployments having upwards of 600k peers now, this somewhat heavy structure could benefit from more fine-grained allocations. Specifically, instead of using a 2048-byte slab for a 1544-byte object, we can now use 1544-byte objects directly, thus saving almost 25% per-peer, or with 600k peers, that's a savings of 303 MiB. This also makes wireguard's memory usage more transparent in tools like slabtop and /proc/slabinfo. Fixes: 8b5553ac ("wireguard: queueing: get rid of per-peer ring buffers") Suggested-by:
-
Jason A. Donenfeld authored
Many of the synchronization points are sometimes called under the rtnl lock, which means we should use synchronize_net rather than synchronize_rcu. Under the hood, this expands to using the expedited flavor of function in the event that rtnl is held, in order to not stall other concurrent changes. This fixes some very, very long delays when removing multiple peers at once, which would cause some operations to take several minutes. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
Apparently, various versions of gcc have O3-related miscompiles. Looking at the difference between -O2 and -O3 for gcc 11 doesn't indicate miscompiles, but the difference also doesn't seem so significant for performance that it's worth risking. Link: https://lore.kernel.org/lkml/CAHk-=wjuoGyxDhAF8SsrTkN0-YfCx7E6jUN3ikC_tn2AKWTTsA@mail.gmail.com/ Link: https://lore.kernel.org/lkml/CAHmME9otB5Wwxp7H8bR_i2uH2esEMvoBMC8uEXBMH9p0q1s6Bw@mail.gmail.com/Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
Some distros may enable strict rp_filter by default, which will prevent vethc from receiving the packets with an unrouteable reverse path address. Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
-
Jason A. Donenfeld authored
On recent kernels, this config symbol is no longer used. Reported-by:
Rui Salvaterra <rsalvaterra@gmail.com> Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
-
Geert Uytterhoeven authored
On m68k (Coldfire M547x): CC drivers/net/ethernet/intel/i40e/i40e_main.o In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9, from drivers/net/ethernet/intel/i40e/i40e.h:41, from drivers/net/ethernet/intel/i40e/i40e_main.c:12: include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero] 153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) } | ^ include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’ 844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs); | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant 844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs); | ^~~~~~~~~~~~~~~~~~~ On m68k, integers are aligned on addresses that are multiples of two, not four, bytes. Hence the size of a structure containing integers may not be divisible by 4. Fix this by adding explicit padding. Fixes: 1f7ea1cd ("ice: Enable FDIR Configure for AVF") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Dave Ertman authored
Currently in the ice driver, the check whether to allow a LLDP packet to egress the interface from the PF_VSI is being based on the SKB's priority field. It checks to see if the packets priority is equal to TC_PRIO_CONTROL. Injected LLDP packets do not always meet this condition. SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL (0x0003) and does not set the priority field. There will be other injection methods (even ones used by end users) that will not correctly configure the socket so that SKB fields are correctly populated. Then ethernet header has to have to correct value for the protocol though. Add a check to also allow packets whose ethhdr->h_proto matches ETH_P_LLDP (0x88CC). Fixes: 0c3a6101 ("ice: Allow egress control packets from PF_VSI") Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
-
Paul Greenwalt authored
Ethtool incorrectly reported supported and advertised auto-negotiation settings for a backplane PHY image which did not support auto-negotiation. This can occur when using media or PHY type for reporting ethtool supported and advertised auto-negotiation settings. Remove setting supported and advertised auto-negotiation settings based on PHY type in ice_phy_type_to_ethtool(), and MAC type in ice_get_link_ksettings(). Ethtool supported and advertised auto-negotiation settings should be based on the PHY image using the AQ command get PHY capabilities with media. Add setting supported and advertised auto-negotiation settings based get PHY capabilities with media in ice_get_link_ksettings(). Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by:
Paul Greenwalt <paul.greenwalt@intel.com> Tested-by:
-
Haiyue Wang authored
VSI rebuild can be failed for LAN queue config, then the VF's VSI will be NULL, the VF reset should be stopped with the VF entering into the disable state. Fixes: 12bb018c ("ice: Refactor VF reset") Signed-off-by:
Haiyue Wang <haiyue.wang@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Brett Creeley authored
Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the same time as VF_MBX_ARQLEN. Fixes: 82ba0128 ("ice: clear VF ARQLEN register on reset") Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
-
Brett Creeley authored
Commit 12bb018c ("ice: Refactor VF reset") caused a regression that removes the ability for a VF to request a different amount of queues via VIRTCHNL_OP_REQUEST_QUEUES. This prevents VF drivers to either increase or decrease the number of queue pairs they are allocated. Fix this by using the variable vf->num_req_qs when determining the vf->num_vf_qs during VF VSI creation. Fixes: 12bb018c ("ice: Refactor VF reset") Signed-off-by:
-
- 03 Jun, 2021 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
bluetooth pull request for net: - Fixes UAF and CVE-2021-3564 - Fix VIRTIO_ID_BT to use an unassigned ID - Fix firmware loading on some Intel Controllers Signed-off-by: -
Xuan Zhuo authored
In virtio-net's large packet mode, there is a hole in the space behind buf. hdr_padded_len - hdr_len We must take this into account when calculating tailroom. [ 44.544385] skb_put.cold (net/core/skbuff.c:5254 (discriminator 1) net/core/skbuff.c:5252 (discriminator 1)) [ 44.544864] page_to_skb (drivers/net/virtio_net.c:485) [ 44.545361] receive_buf (drivers/net/virtio_net.c:849 drivers/net/virtio_net.c:1131) [ 44.545870] ? netif_receive_skb_list_internal (net/core/dev.c:5714) [ 44.546628] ? dev_gro_receive (net/core/dev.c:6103) [ 44.547135] ? napi_complete_done (./include/linux/list.h:35 net/core/dev.c:5867 net/core/dev.c:5862 net/core/dev.c:6565) [ 44.547672] virtnet_poll (drivers/net/virtio_net.c:1427 drivers/net/virtio_net.c:1525) [ 44.548251] __napi_poll (net/core/dev.c:6985) [ 44.548744] net_rx_action (net/core/dev.c:7054 net/core/dev.c:7139) [ 44.549264] __do_softirq (./arch/x86/include/asm/jump_label.h:19 ./include/linux/jump_label.h:200 ./include/trace/events/irq.h:142 kernel/softirq.c:560) [ 44.549762] irq_exit_rcu (kernel/softirq.c:433 kernel/softirq.c:637 kernel/softirq.c:649) [ 44.551384] common_interrupt (arch/x86/kernel/irq.c:240 (discriminator 13)) [ 44.551991] ? asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638) [ 44.552654] asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638) Fixes: fb32856b ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by:Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reported-by:
Corentin Noël <corentin.noel@collabora.com> Tested-by:
-
David S. Miller authored
Merge tag 'ieee802154-for-davem-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== An update from ieee802154 for your *net* tree. This time we have fixes for the ieee802154 netlink code, as well as a driver fix. Zhen Lei, Wei Yongjun and Yang Li each had a patch to cleanup some return code handling ensuring we actually get a real error code when things fails. Dan Robertson fixed a potential null dereference in our netlink handling. Andy Shevchenko removed of_match_ptr()usage in the mrf24j40 driver. ==================== Signed-off-by:
-
Coco Li authored
Reported by syzbot: HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f68f2b87188 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 00000000004665f9 RDX: 00000000200000c0 RSI: 0000000020000000 RDI: 000000000040000a RBP: 00000000004bfbb9 R08: 0000000020000100 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056bf60 R13: 00007ffe19002dff R14: 00007f68f2b87300 R15: 0000000000022000 Allocated by task 17768: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:427 [inline] ____kasan_kmalloc+0xc2/0xf0 mm/kasan/common.c:506 kasan_kmalloc include/linux/kasan.h:233 [inline] __kmalloc+0xb4/0x380 mm/slub.c:4055 kmalloc include/linux/slab.h:559 [inline] kzalloc include/linux/slab.h:684 [inline] fib6_info_alloc+0x2c/0xd0 net/ipv6/ip6_fib.c:154 ip6_route_info_create+0x55d/0x1a10 net/ipv6/route.c:3638 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 __call_rcu kernel/rcu/tree.c:3039 [inline] call_rcu+0x1b1/0xa30 kernel/rcu/tree.c:3114 fib6_info_release include/net/ip6_fib.h:337 [inline] ip6_route_info_create+0x10c4/0x1a10 net/ipv6/route.c:3718 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Second to last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 insert_work+0x54/0x400 kernel/workqueue.c:1331 __queue_work+0x981/0xcc0 kernel/workqueue.c:1497 queue_work_on+0x111/0x200 kernel/workqueue.c:1524 queue_work include/linux/workqueue.h:507 [inline] call_usermodehelper_exec+0x283/0x470 kernel/umh.c:433 kobject_uevent_env+0x1349/0x1730 lib/kobject_uevent.c:617 kvm_uevent_notify_change+0x309/0x3b0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4809 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:877 [inline] kvm_put_kvm+0x9c/0xd10 arch/x86/kvm/../../../virt/kvm/kvm_main.c:920 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3120 __fput+0x352/0x7b0 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x10b/0x1e0 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x26/0x70 kernel/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880145c7800 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 56 bytes to the right of 192-byte region [ffff8880145c7800, ffff8880145c78c0) The buggy address belongs to the page: page:ffffea00005171c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x145c7 flags: 0xfff00000000200(slab) raw: 00fff00000000200 ffffea00006474c0 0000000200000002 ffff888010c41a00 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== In the ip6_route_info_create function, in the case that the nh pointer is not NULL, the fib6_nh in fib6_info has not been allocated. Therefore, when trying to free fib6_info in this error case using fib6_info_release, the function will call fib6_info_destroy_rcu, which it will access fib6_nh_release(f6i->fib6_nh); However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation causing the reported memory issue above. Therefore, releasing the empty pointer directly instead would be the solution. Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info") Fixes: 706ec919 ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info") Signed-off-by:
Coco Li <lixiaoyan@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.13 We have only mt76 fixes this time, most important being the fix for A-MSDU injection attacks. mt76 * mitigate A-MSDU injection attacks (CVE-2020-24588) * fix possible array out of bound access in mt7921_mcu_tx_rate_report * various aggregation and HE setting fixes * suspend/resume fix for pci devices * mt7615: fix crash when runtime-pm is not supported ==================== Signed-off-by:
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
-
Rahul Lakkireddy authored
commit db43b30c ("cxgb4: add ethtool n-tuple filter deletion") has moved searching for next highest priority HASH filter rule to cxgb4_flow_rule_destroy(), which searches the rhashtable before the the rule is removed from it and hence always finds at least 1 entry. Fix by removing the rule from rhashtable first before calling cxgb4_flow_rule_destroy() and hence avoid fetching stale info. Fixes: db43b30c ("cxgb4: add ethtool n-tuple filter deletion") Signed-off-by:
-
David S. Miller authored
Pavel Skripkin says: ==================== This patch series fix 2 memory leaks in caif interface. Syzbot reported memory leak in cfserl_create(). The problem was in cfcnfg_add_phy_layer() function. This function accepts struct cflayer *link_support and assign it to corresponting structures, but it can fail in some cases. These cases must be handled to prevent leaking allocated struct cflayer *link_support pointer, because if error accured before assigning link_support pointer to somewhere, this pointer must be freed. Fail log: [ 49.051872][ T7010] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 49.110236][ T7042] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 49.134936][ T7045] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 49.163083][ T7043] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6) [ 55.248950][ T6994] kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak) int cfcnfg_add_phy_layer(..., struct cflayer *link_support, ...) { ... /* CAIF protocol allow maximum 6 link-layers */ for (i = 0; i < 7; i++) { phyid = (dev->ifindex + i) & 0x7; if (phyid == 0) continue; if (cfcnfg_get_phyinfo_rcu(cnfg, phyid) == NULL) goto got_phyid; } pr_warn("Too many CAIF Link Layers (max 6)\n"); goto out; ... if (link_support != NULL) { link_support->id = phyid; layer_set_dn(frml, link_support); layer_set_up(link_support, frml); layer_set_dn(link_support, phy_layer); layer_set_up(phy_layer, link_support); } ... } As you can see, if cfcnfg_add_phy_layer fails before layer_set_*, link_support becomes leaked. So, in this series, I made cfcnfg_add_phy_layer() return an int and added error handling code to prevent leaking link_support pointer in caif_device_notify() and cfusbl_device_notify() functions. ==================== Signed-off-by:
-
