- 09 Sep, 2017 16 commits
-
-
Daniel Borkmann authored
Differ between illegal XDP action code and just driver unsupported one to provide better feedback when we throw a one-time warning here. Reason is that with 814abfab ("xdp: add bpf_redirect helper function") not all drivers support the new XDP return code yet and thus they will fall into their 'default' case when checking for return codes after program return, which then triggers a bpf_warn_invalid_xdp_action() stating that the return code is illegal, but from XDP perspective it's not. I decided not to place something like a XDP_ACT_MAX define into uapi i) given we don't have this either for all other program types, ii) future action codes could have further encoding there, which would render such define unsuitable and we wouldn't be able to rip it out again, and iii) we rarely add new action codes. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
This reverts commit 95b80bf3 ("mdio_bus: Remove unneeded gpiod NULL check"), this commit assumed that GPIOLIB checks for NULL descriptors, so it's safe to drop them, but it is not when CONFIG_GPIOLIB is disabled in the kernel. If we do call gpiod_set_value_cansleep() on a GPIO descriptor we will issue warnings coming from the inline stubs declared in include/linux/gpio/consumer.h. Fixes: 95b80bf3 ("mdio_bus: Remove unneeded gpiod NULL check") Reported-by:
Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
David S. Miller authored
John Fastabend says: ==================== net: Fixes for XDP/BPF The following fixes, UAPI updates, and small improvement, i. XDP needs to be called inside RCU with preempt disabled. ii. Not strictly a bug fix but we have an attach command in the sockmap UAPI already to avoid having a single kernel released with only the attach and not the detach I'm pushing this into net branch. Its early in the RC cycle so I think this is OK (not ideal but better than supporting a UAPI with a missing detach forever). iii. Final patch replace cpu_relax with cond_resched in devmap. ==================== Signed-off-by: -
John Fastabend authored
Be a bit more friendly about waiting for flush bits to complete. Replace the cpu_relax() with a cond_resched(). Suggested-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
-
John Fastabend authored
The bpf map sockmap supports adding programs via attach commands. This patch adds the detach command to keep the API symmetric and allow users to remove previously added programs. Otherwise the user would have to delete the map and re-add it to get in this state. This also adds a series of additional tests to capture detach operation and also attaching/detaching invalid prog types. API note: socks will run (or not run) programs depending on the state of the map at the time the sock is added. We do not for example walk the map and remove programs from previously attached socks. Acked-by:
-
John Fastabend authored
do_xdp_generic must be called inside rcu critical section with preempt disabled to ensure BPF programs are valid and per-cpu variables used for redirect operations are consistent. This patch ensures this is true and fixes the splat below. The netif_receive_skb_internal() code path is now broken into two rcu critical sections. I decided it was better to limit the preempt_enable/disable block to just the xdp static key portion and the fallout is more rcu_read_lock/unlock calls. Seems like the best option to me. [ 607.596901] ============================= [ 607.596906] WARNING: suspicious RCU usage [ 607.596912] 4.13.0-rc4+ #570 Not tainted [ 607.596917] ----------------------------- [ 607.596923] net/core/dev.c:3948 suspicious rcu_dereference_check() usage! [ 607.596927] [ 607.596927] other info that might help us debug this: [ 607.596927] [ 607.596933] [ 607.596933] rcu_scheduler_active = 2, debug_locks = 1 [ 607.596938] 2 locks held by pool/14624: [ 607.596943] #0: (rcu_read_lock_bh){......}, at: [<ffffffff95445ffd>] ip_finish_output2+0x14d/0x890 [ 607.596973] #1: (rcu_read_lock_bh){......}, at: [<ffffffff953c8e3a>] __dev_queue_xmit+0x14a/0xfd0 [ 607.597000] [ 607.597000] stack backtrace: [ 607.597006] CPU: 5 PID: 14624 Comm: pool Not tainted 4.13.0-rc4+ #570 [ 607.597011] Hardware name: Dell Inc. Precision Tower 5810/0HHV7N, BIOS A17 03/01/2017 [ 607.597016] Call Trace: [ 607.597027] dump_stack+0x67/0x92 [ 607.597040] lockdep_rcu_suspicious+0xdd/0x110 [ 607.597054] do_xdp_generic+0x313/0xa50 [ 607.597068] ? time_hardirqs_on+0x5b/0x150 [ 607.597076] ? mark_held_locks+0x6b/0xc0 [ 607.597088] ? netdev_pick_tx+0x150/0x150 [ 607.597117] netif_rx_internal+0x205/0x3f0 [ 607.597127] ? do_xdp_generic+0xa50/0xa50 [ 607.597144] ? lock_downgrade+0x2b0/0x2b0 [ 607.597158] ? __lock_is_held+0x93/0x100 [ 607.597187] netif_rx+0x119/0x190 [ 607.597202] loopback_xmit+0xfd/0x1b0 [ 607.597214] dev_hard_start_xmit+0x127/0x4e0 Fixes: d4455169 ("net: xdp: support xdp generic on virtual devices") Fixes: b5cdae32 ("net: Generic XDP") Acked-by: -
Daniel Borkmann authored
We can potentially run into a couple of issues with the XDP bpf_redirect_map() helper. The ri->map in the per CPU storage can become stale in several ways, mostly due to misuse, where we can then trigger a use after free on the map: i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT and running on a driver not supporting XDP_REDIRECT yet. The ri->map on that CPU becomes stale when the XDP program is unloaded on the driver, and a prog B loaded on a different driver which supports XDP_REDIRECT return code. prog B would have to omit calling to bpf_redirect_map() and just return XDP_REDIRECT, which would then access the freed map in xdp_do_redirect() since not cleared for that CPU. ii) prog A is calling bpf_redirect_map(), returning a code other than XDP_REDIRECT. prog A is then detached, which triggers release of the map. prog B is attached which, similarly as in i), would just return XDP_REDIRECT without having called bpf_redirect_map() and thus be accessing the freed map in xdp_do_redirect() since not cleared for that CPU. iii) prog A is attached to generic XDP, calling the bpf_redirect_map() helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is currently not handling ri->map (will be fixed by Jesper), so it's not being reset. Later loading a e.g. native prog B which would, say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would find in xdp_do_redirect() that a map was set and uses that causing use after free on map access. Fix thus needs to avoid accessing stale ri->map pointers, naive way would be to call a BPF function from drivers that just resets it to NULL for all XDP return codes but XDP_REDIRECT and including XDP_REDIRECT for drivers not supporting it yet (and let ri->map being handled in xdp_do_generic_redirect()). There is a less intrusive way w/o letting drivers call a reset for each BPF run. The verifier knows we're calling into bpf_xdp_redirect_map() helper, so it can do a small insn rewrite transparent to the prog itself in the sense that it fills R4 with a pointer to the own bpf_prog. We have that pointer at verification time anyway and R4 is allowed to be used as per calling convention we scratch R0 to R5 anyway, so they become inaccessible and program cannot read them prior to a write. Then, the helper would store the prog pointer in the current CPUs struct redirect_info. Later in xdp_do_*_redirect() we check whether the redirect_info's prog pointer is the same as passed xdp_prog pointer, and if that's the case then all good, since the prog holds a ref on the map anyway, so it is always valid at that point in time and must have a reference count of at least 1. If in the unlikely case they are not equal, it means we got a stale pointer, so we clear and bail out right there. Also do reset map and the owning prog in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and bpf_xdp_redirect() won't get mixed up, only the last call should take precedence. A tc bpf_redirect() doesn't use map anywhere yet, so no need to clear it there since never accessed in that layer. Note that in case the prog is released, and thus the map as well we're still under RCU read critical section at that time and have preemption disabled as well. Once we commit with the __dev_map_insert_ctx() from xdp_do_redirect_map() and set the map to ri->map_to_flush, we still wait for a xdp_do_flush_map() to finish in devmap dismantle time once flush_needed bit is set, so that is fine. Fixes: 97f91a7c ("bpf: add bpf_redirect_map helper routine") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Kees Cook authored
It looks like all users of tulip_tbl are reads, so mark this table as read-only. $ git grep tulip_tbl # edited to avoid line-wraps... interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ... interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ... interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ... interrupt.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt, pnic.c: iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); tulip.h: extern struct tulip_chip_table tulip_tbl[]; tulip_core.c:struct tulip_chip_table tulip_tbl[] = { tulip_core.c:iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5); tulip_core.c:iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); tulip_core.c:setup_timer(&tp->timer, tulip_tbl[tp->chip_id].media_timer, tulip_core.c:const char *chip_name = tulip_tbl[chip_idx].chip_name; tulip_core.c:if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) tulip_core.c:ioaddr = pci_iomap(..., tulip_tbl[chip_idx].io_size); tulip_core.c:tp->flags = tulip_tbl[chip_idx].flags; tulip_core.c:setup_timer(&tp->timer, tulip_tbl[tp->chip_id].media_timer, tulip_core.c:INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task); Cc: "David S. Miller" <davem@davemloft.net> Cc: Jarod Wilson <jarod@redhat.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: netdev@vger.kernel.org Cc: linux-parisc@vger.kernel.org Signed-off-by:Kees Cook <keescook@chromium.org> Signed-off-by:
-
Ivan Khoronzhuk authored
Don't remove rx_napi specifically just before free_netdev(), it's supposed to be done in it and is confusing w/o tx_napi deletion. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Mathieu Malaterre authored
This will make it explicit some messages are of the form: dm9000_dbg(db, 5, ... Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Baruch Siach authored
Make the Rx rate select control gpio property name match the documented binding. This would make the addition of 'rate-select1-gpios' for SFP+ support more natural. Also, make the MOD-DEF0 gpio property name match the documentation. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Baruch Siach authored
Add device-tree binding documentation SFP transceivers. Support for SFP transceivers has been recently introduced (drivers/net/phy/sfp.c). Signed-off-by:
-
Baruch Siach authored
Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Baruch Siach authored
This complements commit 9a94b3a4 (dt-binding: phy: don't confuse with Ethernet phy properties). The generic PHY 'phys' property sometime appears in the same node with the Ethernet PHY 'phy' or 'phy-handle' properties. Add a warning in ethernet.txt to reduce confusion. Signed-off-by:
-
Haishuang Yan authored
Similar to vxlan/geneve tunnel, if hop_limit is zero, it should fall back to ip6_dst_hoplimt(). Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
ttl and tos variables are declared and assigned, but are not used in iptunnel_xmit() function. Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by:
-
- 08 Sep, 2017 21 commits
-
-
Eric Dumazet authored
IPv6 FIB should use FIB6_TABLE_HASHSZ, not FIB_TABLE_HASHSZ. Fixes: ba1cc08d ("ipv6: fix memory leak with multiple tables during netns destruction") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
While the cited commit fixed a possible deadlock, it added a leak of the request socket, since reqsk_put() must be called if the BPF filter decided the ACK packet must be dropped. Fixes: d624d276 ("tcp: fix possible deadlock in TCP stack vs BPF filter") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix SCTP connection setup when IPVS module is loaded and any scheduler is registered, from Xin Long. 2) Don't create a SCTP connection from SCTP ABORT packets, also from Xin Long. 3) WARN_ON() and drop packet, instead of BUG_ON() races when calling nf_nat_setup_info(). This is specifically a longstanding problem when br_netfilter with conntrack support is in place, patch from Florian Westphal. 4) Avoid softlock splats via iptables-restore, also from Florian. 5) Revert NAT hashtable conversion to rhashtable, semantics of rhlist are different from our simple NAT hashtable, this has been causing problems in the recent Linux kernel releases. From Florian. 6) Add per-bucket spinlock for NAT hashtable, so at least we restore one of the benefits we got from the previous rhashtable conversion. 7) Fix incorrect hashtable size in memory allocation in xt_hashlimit, from Zhizhou Tian. 8) Fix build/link problems with hashlimit and 32-bit arches, to address recent fallout from a new hashlimit mode, from Vishwanath Pai. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2017-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.14 Few fixes to regressions introduced in the last one or two releases. The iwlwifi fix is for a regression reported by Linus. rtlwifi * fix two antenna selection related bugs iwlwifi * fix regression with older firmwares brcmfmac * workaround firmware crash for bcm4345 ==================== Signed-off-by:
-
Marcelo Ricardo Leitner authored
Commit fb586f25 ("sctp: delay calls to sk_data_ready() as much as possible") minimized the number of wake ups that are triggered in case the association receives a packet with multiple data chunks on it and/or when io_events are enabled and then commit 0970f5b3 ("sctp: signal sk_data_ready earlier on data chunks reception") moved the wake up to as soon as possible. It thus relies on the state machine running later to clean the flag that the event was already generated. The issue is that there are 2 call paths that calls sctp_ulpq_tail_event() outside of the state machine, causing the flag to linger and possibly omitting a needed wake up in the sequence. One of the call paths is when enabling SCTP_SENDER_DRY_EVENTS via setsockopt(SCTP_EVENTS), as noticed by Harald Welte. The other is when partial reliability triggers removal of chunks from the send queue when the application calls sendmsg(). This commit fixes it by not setting the flag in case the socket is not owned by the user, as it won't be cleaned later. This works for user-initiated calls and also for rx path processing. Fixes: fb586f25 ("sctp: delay calls to sk_data_ready() as much as possible") Reported-by:
Harald Welte <laforge@gnumonks.org> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Vishwanath Pai authored
64bit division causes build/link errors on 32bit architectures. It prints out error messages like: ERROR: "__aeabi_uldivmod" [net/netfilter/xt_hashlimit.ko] undefined! The value of avg passed through by userspace in BYTE mode cannot exceed U32_MAX. Which means 64bit division in user2rate_bytes is unnecessary. To fix this I have changed the type of param 'user' to u32. Since anything greater than U32_MAX is an invalid input we error out in hashlimit_mt_check_common() when this is the case. Changes in v2: Making return type as u32 would cause an overflow for small values of 'user' (for example 2, 3 etc). To avoid this I bumped up 'r' to u64 again as well as the return type. This is OK since the variable that stores the result is u64. We still avoid 64bit division here since 'user' is u32. Fixes: bea74641 ("netfilter: xt_hashlimit: add rate match mode") Signed-off-by:
Vishwanath Pai <vpai@akamai.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Zhizhou Tian authored
struct xt_byteslimit_htable used hlist_head, but memory allocation is done through sizeof(struct list_head). Signed-off-by:
Zhizhou Tian <zhizhou.tian@gmail.com> Signed-off-by:
-
Florian Westphal authored
kernel test robot reported: WARNING: CPU: 0 PID: 1244 at net/netfilter/core.c:218 __nf_hook_entries_try_shrink+0x49/0xcd [..] After allowing batching in nf_unregister_net_hooks its possible that an earlier call to __nf_hook_entries_try_shrink already compacted the list. If this happens we don't need to do anything. Fixes: d3ad2c17 ("netfilter: core: batch nf_unregister_net_hooks synchronize_net calls") Reported-by:
kernel test robot <xiaolong.ye@intel.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Aaron Conole <aconole@bytheb.org> Signed-off-by:
-
Florian Westphal authored
no need to serialize on a single lock, we can partition the table and add/delete in parallel to different slots. This restores one of the advantages that got lost with the rhlist revert. Cc: Ivan Babrou <ibobrik@gmail.com> Signed-off-by:
-
Florian Westphal authored
This reverts commit 870190a9. It was not a good idea. The custom hash table was a much better fit for this purpose. A fast lookup is not essential, in fact for most cases there is no lookup at all because original tuple is not taken and can be used as-is. What needs to be fast is insertion and deletion. rhlist removal however requires a rhlist walk. We can have thousands of entries in such a list if source port/addresses are reused for multiple flows, if this happens removal requests are so expensive that deletions of a few thousand flows can take several seconds(!). The advantages that we got from rhashtable are: 1) table auto-sizing 2) multiple locks 1) would be nice to have, but it is not essential as we have at most one lookup per new flow, so even a million flows in the bysource table are not a problem compared to current deletion cost. 2) is easy to add to custom hash table. I tried to add hlist_node to rhlist to speed up rhltable_remove but this isn't doable without changing semantics. rhltable_remove_fast will check that the to-be-deleted object is part of the table and that requires a list walk that we want to avoid. Furthermore, using hlist_node increases size of struct rhlist_head, which in turn increases nf_conn size. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196821Reported-by:
Ivan Babrou <ibobrik@gmail.com> Signed-off-by:
-
Florian Westphal authored
There are reports about spurious softlockups during iptables-restore, a backtrace i saw points at get_counters -- it uses a sequence lock and also has unbounded restart loop. Signed-off-by:
-
Florian Westphal authored
It seems preferrable to limp along if we have a conflicting mapping, its certainly better than a BUG(). Signed-off-by:
-
Sabrina Dubroca authored
fib6_net_exit only frees the main and local tables. If another table was created with fib6_alloc_table, we leak it when the netns is destroyed. Fix this in the same way ip_fib_net_exit cleans up tables, by walking through the whole hashtable of fib6_table's. We can get rid of the special cases for local and main, since they're also part of the hashtable. Reproducer: ip netns add x ip -net x -6 rule add from 6003:1::/64 table 100 ip netns del x Reported-by:Jianlin Shi <jishi@redhat.com> Fixes: 58f09b78 ("[NETNS][IPV6] ip6_fib - make it per network namespace") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Xin Long authored
There's no reason for ipvs to create a conn for an ABORT packet even if sysctl_sloppy_sctp is set. This patch is to accept it without creating a conn, just as ipvs does for tcp's RST packet. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Xin Long authored
Commit 5e26b1b3 ("ipvs: support scheduling inverse and icmp SCTP packets") changed to check packet type early. It introduced a side effect: if it's not a INIT packet, ports will be set as NULL, and the packet will be dropped later. It caused that sctp couldn't create connection when ipvs module is loaded and any scheduler is registered on server. Li Shuang reproduced it by running the cmds on sctp server: # ipvsadm -A -t 1.1.1.1:80 -s rr # ipvsadm -D -t 1.1.1.1:80 then the server could't work any more. This patch is to return 1 when it's not an INIT packet. It means ipvs will accept it without creating a conn for it, just like what it does for tcp. Fixes: 5e26b1b3 ("ipvs: support scheduling inverse and icmp SCTP packets") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
-
Ian W MORRISON authored
The firmware feature check introduced for multi-scheduled scan is also failing for bcm4345 devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Fixes: 9fe929aa ("brcmfmac: add firmware feature detection for gscan feature") Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by:
Ian W MORRISON <ianwmorrison@gmail.com> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Håkon Bugge authored
In rds_send_xmit() there is logic to batch the sends. However, if another thread has acquired the lock and has incremented the send_gen, it is considered a race and we yield. The code incrementing the s_send_lock_queue_raced statistics counter did not count this event correctly. This commit counts the race condition correctly. Changes from v1: - Removed check for *someone_on_xmit()* - Fixed incorrect indentation Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by:
Knut Omang <knut.omang@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
gcc-7 found an ancient bug in the loop driver, leading to a condition that is always false, meaning we ignore the contents of 'card->flags' here: drivers/isdn/isdnloop/isdnloop.c:412:37: error: ?: using integer constants in boolean context, the expression will always evaluate to 'true' [-Werror=int-in-bool-context] This changes the braces in the expression to ensure we actually compare the flag bits, rather than comparing a constant. As Joe Perches pointed out, an earlier patch of mine incorrectly assumed this was a false-positive warning. Cc: Joe Perches <joe@perches.com> Link: https://patchwork.kernel.org/patch/9840289/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Paolo Abeni authored
After commit 0ddf3fb2 ("udp: preserve skb->dst if required for IP options processing") we clear the skb head state as soon as the skb carrying them is first processed. Since the same skb can be processed several times when MSG_PEEK is used, we can end up lacking the required head states, and eventually oopsing. Fix this clearing the skb head state only when processing the last skb reference. Reported-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Xin Long authored
Now when probessing ICMPV6_PKT_TOOBIG, ip6gre_err only subtracts the offset of gre header from mtu info. The expected mtu of gre device should also subtract gre header. Otherwise, the next packets still can't be sent out. Jianlin found this issue when using the topo: client(ip6gre)<---->(nic1)route(nic2)<----->(ip6gre)server and reducing nic2's mtu, then both tcp and sctp's performance with big size data became 0. This patch is to fix it by also subtracting grehdr (tun->tun_hlen) from mtu info when updating gre device's mtu in ip6gre_err(). It also needs to subtract ETH_HLEN if gre dev'type is ARPHRD_ETHER. Reported-by:
-
Jiri Pirko authored
There's a memleak happening for chain 0. The thing is, chain 0 needs to be always present, not created on demand. Therefore tcf_block_get upon creation of block calls the tcf_chain_create function directly. The chain is created with refcnt == 1, which is not correct in this case and causes the memleak. So move the refcnt increment into tcf_chain_get function even for the case when chain needs to be created. Reported-by:
Jakub Kicinski <kubakici@wp.pl> Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Tested-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
- 07 Sep, 2017 3 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2017-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Back from a long absence, so we have a number of things: * a remain-on-channel fix from Avi * hwsim TX power fix from Beni * null-PTR dereference with iTXQ in some rare configurations (Chunho) * 40 MHz custom regdomain fixes (Emmanuel) * look at right place in HT/VHT capability parsing (Igor) * complete A-MPDU teardown properly (Ilan) * Mesh ID Element ordering fix (Liad) * avoid tracing warning in ht_dbg() (Sharon) * fix print of assoc/reassoc (Simon) * fix encrypted VLAN with iTXQ (myself) * fix calling context of TX queue wake (myself) * fix a deadlock with ath10k aggregation (myself) ==================== Signed-off-by:
-
Luca Coelho authored
The LEDS_CMD command is only supported in some newer FW versions (e.g. iwlwifi-8000C-31.ucode), so we can't send it to older versions (such as iwlwifi-8000C-27.ucode). To fix this, check for a new bit in the FW capabilities TLV that tells when the command is supported. Note that the current version of -31.ucode in linux-firmware.git (31.532993.0) does not have this capability bit set, so the LED won't work, even though this version should support it. But we will update this firmware soon, so it won't be a problem anymore. Fixes: 7089ae63 ("iwlwifi: mvm: use firmware LED command where applicable") Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Larry Finger authored
In commit 87d8a9f3 ("rtlwifi: btcoex: call bind to setup btcoex"), the code turns on a call to exhalbtc_bind_bt_coex_withadapter(). This routine contains a bug that causes incorrect antenna selection for those HP laptops with only one antenna and an incorrectly programmed EFUSE. These boxes are the ones that need the ant_sel module parameter. Fixes: 87d8a9f3 ("rtlwifi: btcoex: call bind to setup btcoex") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.13+ Signed-off-by:
-
