- 24 Jan, 2019 5 commits
-
-
Jani Nikula authored
Now that intel_lvds_init() is only called for platforms that might have LVDS, move the remaining checks to intel_setup_outputs(), again similar to other outputs, and remove the overlapping checks. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-3-jani.nikula@intel.com
-
Jani Nikula authored
With new platforms not having LVDS support, only call intel_lvds_init() on platforms that might actually have LVDS. Move the comment about eDP init to the PCH block where it's relevant. This puts intel_lvds_init() more in line with the rest of the outputs, and makes it slightly easier for the uninitiated to figure out which platforms actually have what. Reviewed-by:
-
Jani Nikula authored
With new platforms not having CRT support and most conditions in intel_crt_present() being specific to DDI, split out the CRT initialization to platform specific blocks in the if ladder. Add new Pineview block for this. This puts intel_crt_init() more in line with the rest of the outputs, and makes it slightly easier for the uninitiated to figure out which platforms actually have what. v2: keep gen >= 9 check in intel_ddi_crt_present() (Ville) Reviewed-by:
-
Matt Roper authored
We currently program userspace-provided gamma and degamma LUT's into our hardware without really checking to see whether they satisfy our hardware's rules. We should try to catch tables that are invalid for our hardware early and reject the atomic transaction. All of our platforms that accept a degamma LUT expect that the entries in the LUT are always flat or increasing, never decreasing. Also, our GLK and ICL platforms only accept degamma tables with r=g=b entries; so we should also add the relevant checks for that in anticipation of degamma support landing for those platforms. v2: - Use new API (single check function with bitmask of tests to apply) - Call helper for our gamma table as well (with no additional tests specified) so that the table size will be validated. v3: - Don't call on the gamma table since the LUT size is already tested at property blob upload and we don't have any additional hardware constraints for that LUT. v4: - Apply equal color channel check on gen10 as well; the bspec has some strange tagging for CNL platforms, but this appears to apply there as well. (Ville) Cc: Uma Shankar <uma.shankar@intel.com> Cc: Swati Sharma <swati2.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181218175158.5739-1-matthew.d.roper@intel.com
-
Matt Roper authored
Some hardware may place additional restrictions on the gamma/degamma curves described by our LUT properties. E.g., that a gamma curve never decreases or that the red/green/blue channels of a LUT's entries must be equal. Let's add a helper function that drivers can use to test that a userspace-provided LUT is valid and doesn't violate hardware requirements. v2: - Combine into a single helper that just takes a bitmask of the tests to apply. (Brian Starkey) - Add additional check (always performed) that LUT property blob size is always a multiple of the LUT entry size. (stolen from ARM driver) v3: - Drop the LUT size check again since drm_atomic_replace_property_blob_from_id() already covers this for us. (Alexandru Gheorghe) v4: - Use an enum to describe possible test values rather than #define's; this is cleaner to provide kerneldoc for. (Daniel Vetter) - s/DRM_COLOR_LUT_INCREASING/DRM_COLOR_LUT_NON_DECREASING/. (Ville) Cc: Uma Shankar <uma.shankar@intel.com> Cc: Swati Sharma <swati2.sharma@intel.com> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181217224415.12848-1-matthew.d.roper@intel.com
-
- 23 Jan, 2019 8 commits
-
-
Chris Wilson authored
Record the priority boost we giving to the preempted client or else we may end up in a situation where the priority queue no longer matches the request priority order and so we can end up in an infinite loop of preempting the same pair of requests. Fixes: e9eaf82d ("drm/i915: Priority boost for waiting clients") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk
-
Rodrigo Vivi authored
We just got aware that there was more IDs available at spec, so let's add them already. Cc: James Ausmus <james.ausmus@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
When reading GEN11_GT_INTR_DWx closely after enabling the interrupts in gen11_irq_postinstall, the returned value is garbage. This can cause other parts of the setup code (e.g. gen11_reset_one_iir) to think that there are interrupts to be cleared when there are none. The garbage value is only seen on the first read done after the enable, so this looks like a posting issue. Adding a posting read after enabling the interrupts does indeed fix the problem. Note that the posting read has been purposely added outside of gen11_master_intr_enable since the issue has only been observed when the full interrupt setup is performed. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' v2: rebase Acked-by:
-
José Roberto de Souza authored
The value of this registers will be used to test if PSR2 is doing selective update and if the number of blocks match with the expected. v2: - Using new macros - Changed the string output v3: - reading PSR2_SU_STATUS registers together(Dhinakaran) - printing SU blocks of frames with 0 updates(Dhinakaran) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This register contains how many blocks was sent in the past selective updates. Those registers are not kept set all the times but polling it after flip can show the values corresponding to the last 8 frames. v2: Improved macros(Dhinakaran) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
The old debugfs fields was not following a naming partern and it was a bit confusing. So it went from: ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status Sink_Support: yes PSR mode: PSR1 Enabled: yes Busy frontbuffer bits: 0x000 Main link in standby mode: no HW Enabled & Active bit: yes Source PSR status: 0x24050006 [SRDONACK] To: ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status Sink support: yes [0x03] PSR mode: PSR1 enabled Source PSR ctl: enabled [0x81f00e26] Source PSR status: IDLE [0x04010006] Busy frontbuffer bits: 0x00000000 The 'Main link in standby mode' was removed as it is not useful but if needed by someone the information is still in the register value of 'Source PSR ctl' inside of the brackets, PSR mode and Enabled was squashed into PSR mode, some renames and reorders and we have this cleaner version. This will also make easy to parse debugfs for IGT tests. v2: Printing sink PSR version with only 2 hex digits as it is a byte Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Suggested-by:
-
José Roberto de Souza authored
For now PSR2 is still disabled by default for all platforms but is our intention to let debugfs to enable it for debug and tests proporses, so intel_psr2_enabled() that is also used by debugfs to decide if PSR2 is going to be enabled needs to take in consideration the debug field. v2: Using the switch/case that intel_psr2_enabled() already had to handle this(DK) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
- 22 Jan, 2019 8 commits
-
-
Rodrigo Vivi authored
We need avi infoframe stuff who got merged via drm-misc Signed-off-by: -
Chris Wilson authored
This turns out to be quite useful if one happens to be debugging semaphore deadlocks. Signed-off-by:
-
Chris Wilson authored
A repeated pattern is to test the signaled bit of our request->fence.flags. Make this an inline to shorten a few lines and remove unnecessary line continuations. Signed-off-by:
-
Chris Wilson authored
Prior to adding a third instance of intel_context_init() and extending the information stored therewithin, refactor out the common assignments. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
Chris Wilson authored
Replace the open-coding of advance with a call instead. Signed-off-by:
-
Chris Wilson authored
Before adding yet another copy of struct live_test and its handler, refactor the existing code into a common framework for live selftests. For many live selftests, we want to know if the GPU hung or otherwise misbehaved during the execution of the test (beyond any infraction in the behaviour under test), live_test provides this by comparing the GPU state before and after, alerting if it unexpectedly changed (e.g. the reset counter changed). It also ensures that the GPU is idle before and after the test, so that residual code running on the GPU is flushed before testing. Signed-off-by:
-
Chris Wilson authored
Some tests (e.g. igt_vma_pin1) presume that we have a completely clean GGTT so that it can probe boundaries without fear that something is already allocated there. However, the mock device is starting to get complicated and following similar rules to the live device, i.e. we can't guarantee that i915->ggtt remains clean, so create a temporary address_space equivalent to the mock ggtt for the purpose. Signed-off-by:
-
Chris Wilson authored
During review of commit 71fc448c ("drm/i915/selftests: Make evict tolerant of foreign objects"), Matthew mentioned it would be better if we explicitly tracked the objects we created. We have an obj->st_link hook for this purpose, so add the corresponding list of objects and reduce our loops to only consider our own list. References: 71fc448c ("drm/i915/selftests: Make evict tolerant of foreign objects") Signed-off-by:
-
- 21 Jan, 2019 10 commits
-
-
Hans de Goede authored
The display engine has 2 dithering enable bits which both need to be set for dithering to happen, 1 in the PIPECONF register which is taken care of by i9xx_set_pipeconf() and a second bit at the encoder level. The dsi code was not setting the encoder level dithering enable bit causing dithering to be disabled, this commit fixes this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Hans de Goede authored
There are 3 problems with the dsi code's pipe_bpp handling for 6 bpc pixel-formats which this commit addresses: 1) It assumes that the pipe_bpp is the same as the bpp going over the dsi lanes. This assumption is not valid for MIPI_DSI_FMT_RGB666, where pipe_bpp should be 18 so that we do proper dithering but we actually send 24 bpp over the dsi lanes (MIPI_DSI_FMT_RGB666_PACKED sends 18 bpp). This assumption is enforced by an assert in *_dsi_get_pclk(). This assert triggers on the initial hw-state readback on BYT/CHT devices which use MIPI_DSI_FMT_RGB666, such as the Prowise PT301 tablet. PIPECONF is set to 6BPC / 18 bpp by the GOP, while mipi_dsi_pixel_format_to_bpp() returns 24. This commits switches the calculations in *_dsi_get_pclk() to use the bpp from mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format) which returns the bpp going over the mipi lanes and drops the assert. 2) On BXT bxt_dsi_get_pipe_config() wrongly overrides the pipe_bpp which i9xx_get_pipe_config() reads from PIPECONF with the return value from mipi_dsi_pixel_format_to_bpp(). This avoids the assert from 1. but is wrong since the pipe is actually running at the value configured in PIPECONF. This commit drops the override of pipe_bpp from bxt_dsi_get_pipe_config(). 3) The dsi encoder's compute_config() never assigns a value to pipe_bpp, unlike most other encoders. Falling back on compute_baseline_pipe_bpp() which always picks 24. 24 is only correct for MIPI_DSI_FMT_RGB88 for the others we should use 18 bpp so that we correctly do 6bpc color dithering. This commit adds code to intel_dsi_compute_config() to properly set pipe_bpp based on intel_dsi->pixel_format. Signed-off-by:
-
Chris Wilson authored
We are not allowed to assign rq->global_seqno=0 as it has a special meaning of "inactive" (not executing on HW). Fixes: 6faf5916 ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation") Signed-off-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch fixes sprinkled on top of the changed lines. Acked-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Reviewed-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch/whitepace fixes sprinkled on top of the changed lines. v2: more whitespace fixes (Ville, José) Acked-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch fixes sprinkled on top of the changed lines. Acked-by:
-
Jani Nikula authored
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Acked-by:
-
- 18 Jan, 2019 7 commits
-
-
Chris Wilson authored
To correctly simulate preemption between contexts, we need independent timelines along each context. Make it so. Signed-off-by:
-
Jani Nikula authored
It's superfluous. Reviewed-by:
-
Chris Wilson authored
The evict selftests presumed that all objects in use had been allocated by itself. This is a dubious claim and so instead of asserting complete control over the object lists, take (temporary) ownership of them instead. Signed-off-by:
-
Chris Wilson authored
Since commit d4ccceb0 ("drm/i915/icl: Ringbuffer interrupt handling") we have required a mechanism to avoid touching the interrupt hardware for breadcrumbs, superseding our mock interface for selftests. The residual problem (ideas welcome) is in probing the mock ring registers for ring_is_idle. Hmm, maybe we should just install mock handlers for i915->uncore.mmio__write and friends? Only problem being is that we would to truly mock some expected reads. :( References: d4ccceb0 ("drm/i915/icl: Ringbuffer interrupt handling") Signed-off-by:
-
Chris Wilson authored
Since we have the ppgtt we want to test, we can ask it directly if it is suitable for the hugepage test we intend to undertake. v2: Not everyone has full-ppgtt Signed-off-by:
-
Chris Wilson authored
The motivation for introducing the check that we only enable breadcrumb irqs if the device's irq was installed was once upon a time we waited during suspend after disabling interrupts (which was quite slow until the bug was discovered). Since then we have the notion of pinning the breadcrumb irq, broadening it from the sole purpose of user interrupt notification and waiting, and more importantly decoupling it from a very defined time period during which enabling the irq was expected. So stop insisting the irq is installed before we setup our IMR masks, if the IER isn't yet enabled, nothing will happen and we will timeout instead, revealing the lack of irq in the hang debug messages. Signed-off-by:
-
Tvrtko Ursulin authored
To avoid a false positive of a leaked wakeref, we can store the cookie in file->private_data and use it in intel_runtime_pm_put. Signed-off-by:
-
- 17 Jan, 2019 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.1: UAPI Changes: - New fourcc identifier for ARM Framebuffer Compression v1.3 Cross-subsystem Changes: Core Changes: - Reorganisation of drm_device and drm_framebuffer headers - Cleanup of the drmP inclusion - Fix leaks in the fb-helpers - Allow for depth different from bpp in fb-helper fbdev emulation - Remove drm_mode_object from drm_display_mode Driver Changes: - Add reflection properties to rockchip - a bunch of fixes for virtio - a bunch of fixes for dp_mst and drivers using it, and introduction of a new refcounting scheme - Convertion of bochs to atomic and generic fbdev emulation - Allow meson to remove the firmware framebuffers [airlied: patch rcar-du to add drm_modes.h] Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea
-
Chris Wilson authored
Let static analyzers (smatch) know that we are not going to wander off the end of the array by providing a tight upper bound: drivers/gpu/drm/i915/intel_display.c:9532 hsw_get_transcoder_state() error: buffer overflow 'dev_priv->__info.trans_offsets' 6 <= 31 References: 0716931a ("drm/i915/icl: fix transcoder state readout") Signed-off-by:
-
