Replaced an assignment operation with an OR operation.

The variable assignment was overwriting the value read from the PHY
register. The OR operation sets only the intended register bits.

The bits that were being overwritten are reserved, so the assignment had no
functional impact.

Reported by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add status register reads and delay between reads to ixgbe_check_remove.
Registers can read 0xFFFFFFFF during PCI reset, which causes the driver
to remove the adapter. The additional status register reads can reduce the
chance of this race condition.

If the status register is not 0xFFFFFFFF, then ixgbe_check_remove returns
the value of the register being read.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The phys embedded into the v1.1 of the VR9 SoC are using different phy
ids. Add the phy ids to use the driver for this VR9 version as well.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VR9 phy ids are matching only for the SoC version 1.2. Rename the
macros and change the names to take this into account.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 2bfbd35d ("net: hns3: Changes required in PF mailbox to support VF reset")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: introduce 128-bit auto-configurable node id

We introduce a 128-bit free-format node identity as an alternative to
the legacy <Zone.Cluster.Node> structured 32-bit node address.

We also make configuration of this identity optional; if a bearer is
enabled without a pre-configured node id it will be set automatically
based on the used interface's MAC or IP address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Selecting and explicitly configuring a TIPC node identity may be
unwanted in some cases.

In this commit we introduce a default setting if the identity has not
been set at the moment the first bearer is enabled. We do this by
using a raw copy of a unique identifier from the used interface: MAC
address in the case of an L2 bearer, IPv4/IPv6 address in the case
of a UDP bearer.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a 32-bit node address is generated from a 128-bit identifier,
there is a risk of collisions which must be discovered and handled.

We do this as follows:
- We don't apply the generated address immediately to the node, but do
  instead initiate a 1 sec trial period to allow other cluster members
  to discover and handle such collisions.

- During the trial period the node periodically sends out a new type
  of message, DSC_TRIAL_MSG, using broadcast or emulated broadcast,
  to all the other nodes in the cluster.

- When a node is receiving such a message, it must check that the
  presented 32-bit identifier either is unused, or was used by the very
  same peer in a previous session. In both cases it accepts the request
  by not responding to it.

- If it finds that the same node has been up before using a different
  address, it responds with a DSC_TRIAL_FAIL_MSG containing that
  address.

- If it finds that the address has already been taken by some other
  node, it generates a new, unused address and returns it to the
  requester.

- During the trial period the requesting node must always be prepared
  to accept a failure message, i.e., a message where a peer suggests a
  different (or equal)  address to the one tried. In those cases it
  must apply the suggested value as trial address and restart the trial
  period.

This algorithm ensures that in the vast majority of cases a node will
have the same address before and after a reboot. If a legacy user
configures the address explicitly, there will be no trial period and
messages, so this protocol addition is completely backwards compatible.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We add a 128-bit node identity, as an alternative to the currently used
32-bit node address.

For the sake of compatibility and to minimize message header changes
we retain the existing 32-bit address field. When not set explicitly by
the user, this field will be filled with a hash value generated from the
much longer node identity, and be used as a shorthand value for the
latter.

We permit either the address or the identity to be set by configuration,
but not both, so when the address value is set by a legacy user the
corresponding 128-bit node identity is generated based on the that value.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a preparation to changing the addressing structure of TIPC we replace
all direct accesses to the tipc_net::own_addr field with the function
dedicated for this, tipc_own_addr().

There are no changes to program logics in this commit.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The removal of an internal structure of the node address has an unwanted
side effect.
- Currently, if a user is sending an anycast message with destination
  domain 0, the tipc_namebl_translate() function will use the 'closest-
  first' algorithm to first look for a node local destination, and only
  when no such is found, will it resort to the cluster global 'round-
  robin' lookup algorithm.
- Current users can get around this, and enforce unconditional use of
  global round-robin by indicating a destination as Z.0.0 or Z.C.0.
- This option disappears when we make the node address flat, since the
  lookup algorithm has no way of recognizing this case. So, as long as
  there are node local destinations, the algorithm will always select
  one of those, and there is nothing the sender can do to change this.

We solve this by eliminating the 'closest-first' option, which was never
a good idea anyway, for non-legacy users, but only for those. To
distinguish between legacy users and non-legacy users we introduce a new
flag 'legacy_addr_format' in struct tipc_core, to be set when the user
configures a legacy-style Z.C.N node address. Hence, when a legacy user
indicates a zero lookup domain 'closest-first' is selected, and in all
other cases we use 'round-robin'.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nominally, TIPC organizes network nodes into a three-level network
hierarchy consisting of the levels 'zone', 'cluster' and 'node'. This
hierarchy is reflected in the node address format, - it is sub-divided
into an 8-bit zone id, and 12 bit cluster id, and a 12-bit node id.

However, the 'zone' and 'cluster' levels have in reality never been
fully implemented,and never will be. The result of this has been
that the first 20 bits the node identity structure have been wasted,
and the usable node identity range within a cluster has been limited
to 12 bits. This is starting to become a problem.

In the following commits, we will need to be able to connect between
nodes which are using the whole 32-bit value space of the node address.
We therefore remove the restrictions on which values can be assigned
to node identity, -it is from now on only a 32-bit integer with no
assumed internal structure.

Isolation between clusters is now achieved only by setting different
values for the 'network id' field used during neighbor discovery, in
practice leading to the latter becoming the new cluster identity.

The rules for accepting discovery requests/responses from neighboring
nodes now become:

- If the user is using legacy address format on both peers, reception
  of discovery messages is subject to the legacy lookup domain check
  in addition to the cluster id check.

- Otherwise, the discovery request/response is always accepted, provided
  both peers have the same network id.

This secures backwards compatibility for users who have been using zone
or cluster identities as cluster separators, instead of the intended
'network id'.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To facilitate the coming changes in the neighbor discovery functionality
we make some renaming and refactoring of that code. The functional changes
in this commit are trivial, e.g., that we move the message sending call in
tipc_disc_timeout() outside the spinlock protected region.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a preparation for the next commits we try to reduce the footprint of
the function tipc_enable_bearer(), while hopefully making is simpler to
follow.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

_rule_ is being freed and then dereferenced by accessing rule->ctx

Fix this by copying the value returned by PTR_ERR(rule->ctx) into a local
variable for its safe use after freeing _rule_

Addresses-Coverity-ID: 1466041 ("Read from pointer after free")
Fixes: 05564d0a ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation")
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
Converting pernet_operations (part #11)

this series continues to review and to convert pernet_operations
to make them possible to be executed in parallel for several
net namespaces at the same time.

I thought last series was last, but there is one
new pernet_operations came to kernel. This is
udp_sysctl_ops, and here we convert it.

Also, David Howells acked rxrpc_net_ops, so I resend
the patch in case of it should be queued by patchwork:

https://www.spinics.net/lists/netdev/msg490678.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations modifies rxrpc_net_id-pointed
per-net entities. There is external link to AF_RXRPC
in fs/afs/Kconfig, but it seems there is no other
pernet_operations interested in that per-net entities.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These pernet_operations just initialize udp4 defaults.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the first element of struct mlxsw_sp_span_parms is a pointer,
to zero-initialize this structure the correct notation is not = {0}, but
rather = {NULL}, as reported by sparse.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test d959: Add cBPF action with valid bytecode
Test f84a: Add cBPF action with invalid bytecode
Test e939: Add eBPF action with valid object-file
Test 282d: Add eBPF action with invalid object-file
Test d819: Replace cBPF bytecode and action control
Test 6ae3: Delete cBPF action
Test 3e0d: List cBPF actions
Test 55ce: Flush BPF actions
Test ccc3: Add cBPF action with duplicate index
Test 89c7: Add cBPF action with invalid index
Test 7ab9: Add cBPF action with cookie

Changes since v1:
 - use index=2^32-1 in test ccc3, add tests 7a89, 89c7 (thanks Roman Mashak)
 - added test 282d
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to use br_vlan_enabled() helper otherwise we'll break builds
without bridge vlans:
net/bridge//br_if.c: In function ‘br_mtu’:
net/bridge//br_if.c:458:8: error: ‘const struct net_bridge’ has no
member named ‘vlan_enabled’
  if (br->vlan_enabled)
        ^
net/bridge//br_if.c:462:1: warning: control reaches end of non-void
function [-Wreturn-type]
 }
 ^
scripts/Makefile.build:324: recipe for target 'net/bridge//br_if.o'
failed

Fixes: 419d14af ("bridge: Allow max MTU when multiple VLANs present")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dave Watson says:

====================
TLS Rx

TLS tcp socket RX implementation, to match existing TX code.

This patchset completes the software TLS socket, allowing full
bi-directional communication over TLS using normal socket syscalls,
after the handshake has been done in userspace.  Only the symmetric
encryption is done in the kernel.

This allows usage of TLS sockets from within the kernel (for example
with network block device, or from bpf).  Performance can be better
than userspace, with appropriate crypto routines [1].

sk->sk_socket->ops must be overridden to implement splice_read and
poll, but otherwise the interface & implementation match TX closely.
strparser is used to parse TLS framing on receive.

There are Openssl RX patches that work with this interface [2], as
well as a testing tool using the socket interface directly (without
cmsg support) [3].  An example tcp socket setup is:

  // Normal tcp socket connect/accept, and TLS handshake
  // using any TLS library.
  setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls"));

  struct tls12_crypto_info_aes_gcm_128 crypto_info_rx;
  // Fill in crypto_info based on negotiated keys.

  setsockopt(sock, SOL_TLS, TLS_RX, &crypto_info, sizeof(crypto_info_rx));
  // You can optionally TLX_TX as well.

  char buffer[16384];
  int ret = recv(sock, buffer, 16384);

  // cmsg can be received using recvmsg and a msg_control
  // of type TLS_GET_RECORD_TYPE will be set.

V1 -> V2

* For too-small framing errors, return EBADMSG, to match openssl error
  code semantics.  Docs and commit logs about this also updated.

RFC -> V1

* Refactor 'tx' variable names to drop tx
* Error return codes changed per discussion
* Only call skb_cow_data based on in-place decryption,
  drop unnecessary frag list check.

[1] Recent crypto patchset to remove copies, resulting in optimally
    zero copies vs. userspace's one, vs. previous kernel's two.

https://marc.info/?l=linux-crypto-vger&m=151931242406416&w=2

[2] https://github.com/Mellanox/openssl/commits/tls_rx2

[3] https://github.com/ktls/af_ktls-tool/tree/RX
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add documentation on rx path setup and cmsg interface.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add rx path for tls software implementation.

recvmsg, splice_read, and poll implemented.

An additional sockopt TLS_RX is added, with the same interface as
TLS_TX.  Either TLX_RX or TLX_TX may be provided separately, or
together (with two different setsockopt calls with appropriate keys).

Control messages are passed via CMSG in a similar way to transmit.
If no cmsg buffer is passed, then only application data records
will be passed to userspace, and EIO is returned for other types of
alerts.

EBADMSG is passed for decryption errors, and EMSGSIZE is passed for
framing too big, and EBADMSG for framing too small (matching openssl
semantics). EINVAL is returned for TLS versions that do not match the
original setsockopt call.  All are unrecoverable.

strparser is used to parse TLS framing.   Decryption is done directly
in to userspace buffers if they are large enough to support it, otherwise
sk_cow_data is called (similar to ipsec), and buffers are decrypted in
place and copied.  splice_read always decrypts in place, since no
buffers are provided to decrypt in to.

sk_poll is overridden, and only returns POLLIN if a full TLS message is
received.  Otherwise we wait for strparser to finish reading a full frame.
Actual decryption is only done during recvmsg or splice_read calls.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several config variables are prefixed with tx, drop the prefix
since these will be used for both tx and rx.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass EBADMSG explicitly to tls_err_abort.  Receive path will
pass additional codes - EMSGSIZE if framing is larger than max
TLS record size, EINVAL if TLS version mismatch.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Separate tx crypto parameters to a separate cipher_context struct.
The same parameters will be used for rx using the same struct.

tls_advance_record_sn is modified to only take the cipher info.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor zerocopy_from_iter to take arguments for pages and size,
such that it can be used for both tx and rx. RX will also support
zerocopy direct to output iter, as long as the full message can
be copied at once (a large enough userspace buffer was provided).
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the SPDX identifiers to all the Intel wired LAN driver files, as
outlined in Documentation/process/license-rules.rst.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the bridge is allowing multiple VLANs, some VLANs may have
different MTUs.  Instead of choosing the minimum MTU for the
bridge interface, choose the maximum MTU of the bridge members.
With this the user only needs to set a larger MTU on the member
ports that are participating in the large MTU VLANS.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The operstate update logic will leave an interface in the
default UNKNOWN operstate if the interface carrier state never changes
from the default carrier up state set at creation.  This includes the
case of an explicit call to netif_carrier_on, as the carrier on to on
transition has no effect on operstate.

	This affects virtio-net for the case that the virtio peer does
not support VIRTIO_NET_F_STATUS (the feature that provides carrier state
updates).  Without this feature, the virtio specification states that
"the link should be assumed active," so, logically, the operstate should
be UP instead of UNKNOWN.  This has impact on user space applications
that use the operstate to make availability decisions for the interface.

	Resolve this by changing the virtio probe logic slightly to call
netif_carrier_off for both the "with" and "without" VIRTIO_NET_F_STATUS
cases, and then the existing call to netif_carrier_on for the "without"
case will cause an operstate transition.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Earlier change missed the path where CONFIG_NET_DEVLINK is disabled.
Thanks to Jiri for spotting.

Fixes: 14530746 ("devlink: Remove top_hierarchy arg to devlink_resource_register")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fun set of conflict resolutions here...

For the mac80211 stuff, these were fortunately just parallel
adds.  Trivially resolved.

In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.

In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.

The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.

The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:

====================

    Due to bug fixes found by the syzkaller bot and taken into the for-rc
    branch after development for the 4.17 merge window had already started
    being taken into the for-next branch, there were fairly non-trivial
    merge issues that would need to be resolved between the for-rc branch
    and the for-next branch.  This merge resolves those conflicts and
    provides a unified base upon which ongoing development for 4.17 can
    be based.

    Conflicts:
            drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f
            (IB/mlx5: Fix cleanup order on unload) added to for-rc and
            commit b5ca15ad (IB/mlx5: Add proper representors support)
            add as part of the devel cycle both needed to modify the
            init/de-init functions used by mlx5.  To support the new
            representors, the new functions added by the cleanup patch
            needed to be made non-static, and the init/de-init list
            added by the representors patch needed to be modified to
            match the init/de-init list changes made by the cleanup
            patch.
    Updates:
            drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
            prototypes added by representors patch to reflect new function
            names as changed by cleanup patch
            drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
            stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc fixes from Andrew Morton:
 "13 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, thp: do not cause memcg oom for thp
  mm/vmscan: wake up flushers for legacy cgroups too
  Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
  mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
  mm/thp: do not wait for lock_page() in deferred_split_scan()
  mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
  x86/mm: implement free pmd/pte page interfaces
  mm/vmalloc: add interfaces to free unmapped page table
  h8300: remove extraneous __BIG_ENDIAN definition
  hugetlbfs: check for pgoff value overflow
  lockdep: fix fs_reclaim warning
  MAINTAINERS: update Mark Fasheh's e-mail
  mm/mempolicy.c: avoid use uninitialized preferred_node

Pull libnvdimm fixes from Dan Williams:
 "Two regression fixes, two bug fixes for older issues, two fixes for
  new functionality added this cycle that have userspace ABI concerns,
  and a small cleanup. These have appeared in a linux-next release and
  have a build success report from the 0day robot.

   * The 4.16 rework of altmap handling led to some configurations
     leaking page table allocations due to freeing from the altmap
     reservation rather than the page allocator.

     The impact without the fix is leaked memory and a WARN() message
     when tearing down libnvdimm namespaces. The rework also missed a
     place where error handling code needed to be removed that can lead
     to a crash if devm_memremap_pages() fails.

   * acpi_map_pxm_to_node() had a latent bug whereby it could
     misidentify the closest online node to a given proximity domain.

   * Block integrity handling was reworked several kernels back to allow
     calling add_disk() after setting up the integrity profile.

     The nd_btt and nd_blk drivers are just now catching up to fix
     automatic partition detection at driver load time.

   * The new peristence_domain attribute, a platform indicator of
     whether cpu caches are powerfail protected for example, is meant to
     be a single value enum and not a set of flags.

     This oversight was caught while reviewing new userspace code in
     libndctl to communicate the attribute.

     Fix this new enabling up so that we are not stuck with an unwanted
     userspace ABI"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, nfit: fix persistence domain reporting
  libnvdimm, region: hide persistence_domain when unknown
  acpi, numa: fix pxm to online numa node associations
  x86, memremap: fix altmap accounting at free
  libnvdimm: remove redundant assignment to pointer 'dev'
  libnvdimm, {btt, blk}: do integrity setup before add_disk()
  kernel/memremap: Remove stale devres_free() call

Pull drm fixes from Dave Airlie:
 "A bunch of fixes all over the place (core, i915, amdgpu, imx, sun4i,
  ast, tegra, vmwgfx), nothing too serious or worrying at this stage.

   - one uapi fix to stop multi-planar images with getfb

   - Sun4i error path and clock fixes

   - udl driver mmap offset fix

   - i915 DP MST and GPU reset fixes

   - vmwgfx mutex and black screen fixes

   - imx array underflow fix and vblank fix

   - amdgpu: display fixes

   - exynos devicetree fix

   - ast mode fix"

* tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux: (29 commits)
  drm/ast: Fixed 1280x800 Display Issue
  drm: udl: Properly check framebuffer mmap offsets
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/vmwgfx: Fix a destoy-while-held mutex problem.
  drm/vmwgfx: Fix black screen and device errors when running without fbdev
  drm: Reject getfb for multi-plane framebuffers
  drm/amd/display: Add one to EDID's audio channel count when passing to DC
  drm/amd/display: We shouldn't set format_default on plane as atomic driver
  drm/amd/display: Fix FMT truncation programming
  drm/amd/display: Allow truncation to 10 bits
  drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'
  drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
  drm/amd/display: fix dereferencing possible ERR_PTR()
  drm/amd/display: Refine disable VGA
  drm/tegra: Shutdown on driver unbind
  drm/tegra: dsi: Don't disable regulator on ->exit()
  drm/tegra: dc: Detach IOMMU group from domain only once
  dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
  drm/imx: move arming of the vblank event to atomic_flush
  ...

Commit 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and
madvised allocations") changed the page allocator to no longer detect
thp allocations based on __GFP_NORETRY.

It did not, however, modify the mem cgroup try_charge() path to avoid
oom kill for either khugepaged collapsing or thp faulting.  It is never
expected to oom kill a process to allocate a hugepage for thp; reclaim
is governed by the thp defrag mode and MADV_HUGEPAGE, but allocations
(and charging) should fallback instead of oom killing processes.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803191409420.124411@chino.kir.corp.google.com
Fixes: 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations")
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 726d061f ("mm: vmscan: kick flushers when we encounter dirty
pages on the LRU") added flusher invocation to shrink_inactive_list()
when many dirty pages on the LRU are encountered.

However, shrink_inactive_list() doesn't wake up flushers for legacy
cgroup reclaim, so the next commit bbef9384 ("mm: vmscan: remove old
flusher wakeup from direct reclaim path") removed the only source of
flusher's wake up in legacy mem cgroup reclaim path.

This leads to premature OOM if there is too many dirty pages in cgroup:
    # mkdir /sys/fs/cgroup/memory/test
    # echo $$ > /sys/fs/cgroup/memory/test/tasks
    # echo 50M > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
    # dd if=/dev/zero of=tmp_file bs=1M count=100
    Killed

    dd invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0

    Call Trace:
     dump_stack+0x46/0x65
     dump_header+0x6b/0x2ac
     oom_kill_process+0x21c/0x4a0
     out_of_memory+0x2a5/0x4b0
     mem_cgroup_out_of_memory+0x3b/0x60
     mem_cgroup_oom_synchronize+0x2ed/0x330
     pagefault_out_of_memory+0x24/0x54
     __do_page_fault+0x521/0x540
     page_fault+0x45/0x50

    Task in /test killed as a result of limit of /test
    memory: usage 51200kB, limit 51200kB, failcnt 73
    memory+swap: usage 51200kB, limit 9007199254740988kB, failcnt 0
    kmem: usage 296kB, limit 9007199254740988kB, failcnt 0
    Memory cgroup stats for /test: cache:49632KB rss:1056KB rss_huge:0KB shmem:0KB
            mapped_file:0KB dirty:49500KB writeback:0KB swap:0KB inactive_anon:0KB
	    active_anon:1168KB inactive_file:24760KB active_file:24960KB unevictable:0KB
    Memory cgroup out of memory: Kill process 3861 (bash) score 88 or sacrifice child
    Killed process 3876 (dd) total-vm:8484kB, anon-rss:1052kB, file-rss:1720kB, shmem-rss:0kB
    oom_reaper: reaped process 3876 (dd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB

Wake up flushers in legacy cgroup reclaim too.

Link: http://lkml.kernel.org/r/20180315164553.17856-1-aryabinin@virtuozzo.com
Fixes: bbef9384 ("mm: vmscan: remove old flusher wakeup from direct reclaim path")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>