- 26 Mar, 2018 18 commits
-
-
Anirudh Venkataramanan authored
This patch adds to the initialization flow by getting switch configuration, scheduler configuration and device capabilities. Switch configuration: On boot, an L2 switch element is created in the firmware per physical function. Each physical function is also mapped to a port, to which its switch element is connected. In other words, this switch can be visualized as an embedded vSwitch that can connect a physical function's virtual station interfaces (VSIs) to the egress/ingress port. Egress/ingress filters will be eventually created and applied on this switch element. As part of the initialization flow, the driver gets configuration data from this switch element and stores it. Scheduler configuration: The Tx scheduler is a subsystem responsible for setting and enforcing QoS. As part of the initialization flow, the driver queries and stores the default scheduler configuration for the given physical function. Device capabilities: As part of initialization, the driver has to determine what the device is capable of (ex. max queues, VSIs, etc). This information is obtained from the firmware and stored by the driver. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Acked-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anirudh Venkataramanan authored
This patch implements multiple pieces of the initialization flow as follows: 1) A reset is issued to ensure a clean device state, followed by initialization of admin queue interface. 2) Once the admin queue interface is up, clear the PF config and transition the device to non-PXE mode. 3) Get the NVM configuration stored in the device's non-volatile memory (NVM) using ice_init_nvm. CC: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Anirudh Venkataramanan authored
A control queue is a hardware interface which is used by the driver to interact with other subsystems (like firmware, PHY, etc.). It is implemented as a producer-consumer ring. More specifically, an "admin queue" is a type of control queue used to interact with the firmware. This patch introduces data structures and functions to initialize and teardown control/admin queues. Once the admin queue is initialized, the driver uses it to get the firmware version. Signed-off-by:
-
Anirudh Venkataramanan authored
This patch adds a basic driver framework for the Intel(R) E800 Ethernet Series of network devices. There is no functionality right now other than the ability to load. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.17 The biggest changes are the bluetooth related patches to the rsi driver. It adds a new bluetooth driver which communicates directly with the wireless driver and the interface is defined in include/net/rsi_91x.h. Major changes: wl1251 * read the MAC address from the NVS file rtlwifi * enable mac80211 fast-tx support mt76 * add capability to select tx/rx antennas mt7601 * let mac80211 validate rx CCMP Packet Number (PN) rsi * bluetooth: add new btrsi driver * btcoex support with the new btrsi driver ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
kbuild test robot authored
Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by: Jon Maloy jon.maloy@ericsson.com Signed-off-by:
-
Dan Carpenter authored
There is an && vs || typo here, which potentially leads to a NULL dereference. Fixes: e9e1e978 ("ibmvnic: Update TX pool cleaning routine") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ganesh Goudar authored
Add support for new 32MB and 64MB ISSI (Integrated Silicon Solution, Inc.) FLASH parts. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ganesh Goudar authored
Depend on the firmware sending us link status changes, rather than assuming that the link goes down upon L1 configuration. Signed-off-by:
-
Arjun Vynipadath authored
Copy vlan_id to get it displayed in vf info. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
-
Arjun Vynipadath authored
When NetworkManager is enabled, there are chances that interface up is called even before probe completes. This means we have not yet allocated the FW sge queues, hence rest of ingress queue allocation wont be proper. Fix this by calling setup_fw_sge_queues() before register_netdev(). Fixes: 0fbc81b3 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's') Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: broadcom: Adaptive interrupt coalescing This patch series adds adaptive interrupt coalescing for the Gigabit Ethernet drivers SYSTEMPORT and GENET. This really helps lower the interrupt count and system load, as measured by vmstat for a Gigabit TCP RX session: SYSTEMPORT: without: 1 0 0 192188 0 25472 0 0 0 0 122100 38870 1 42 57 0 0 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 1.03 GBytes 884 Mbits/sec with: 1 0 0 192288 0 25468 0 0 0 0 58806 44401 0 100 0 0 0 [ 5] 0.0-10.0 sec 1.04 GBytes 888 Mbits/sec GENET: without: 1 0 0 1170404 0 25420 0 0 0 0 130785 63402 2 85 12 0 0 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 1.04 GBytes 888 Mbits/sec with: 1 0 0 1170560 0 25420 0 0 0 0 50610 48477 0 100 0 0 0 [ 5] 0.0-10.0 sec 1.05 GBytes 899 Mbits/sec Please look at the implementation and let me know if you see any problems, this was largely inspired by bnxt_en. ==================== Signed-off-by: -
Florian Fainelli authored
Unlike the moder modern SYSTEMPORT hardware, we do not have a configurable TDMA timeout, which limits us to implement adaptive RX interrupt coalescing only. We have each of our RX rings implement a bcmgenet_net_dim structure which holds an interrupt counter, number of packets, bytes, and a container for a net_dim instance. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Implement support for adaptive RX and TX interrupt coalescing using net_dim. We have each of our TX ring and our single RX ring implement a bcm_sysport_net_dim structure which holds an interrupt counter, number of packets, bytes, and a container for a net_dim instance. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Fixes to allow mv88e6xxx module to be reloaded As reported by Uwe Kleine-König, the interrupt trigger is first configured by DT and then reconfigured to edge. This results in a failure on EPROBE_DEFER, or if the module is unloaded and reloaded. A second crash happens on module reload due to a missing call to the common IRQ free code when using polled interrupts. With these fixes in place, it becomes possible to load and unload the kernel modules a few times without it crashing. v2: Fix the ü in Künig a couple of times v3: But the ü should be an ö! ==================== Signed-off-by: -
Andrew Lunn authored
When free'ing the polled IRQs, call the common irq free code. Otherwise the interrupts are left registered, and when we come to load the driver a second time, we get an Opps. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
By calling request_threaded_irq() with the flag IRQF_TRIGGER_FALLING we override the trigger mode provided in device tree. And the interrupt is actually active low, which is what all the current device tree descriptions use. Suggested-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Roman Mashak authored
Added extra test cases for control actions (reclassify, pipe etc.), cookies, max index value and police args sanity check. Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
- 25 Mar, 2018 21 commits
-
-
David S. Miller authored
Haiyang Zhang says: ==================== hv_netvsc: Fix/improve RX path error handling Fix the status code returned to the host. Also add range check for rx packet offset and length. ==================== Signed-off-by: -
Haiyang Zhang authored
This patch adds range checking for rx packet offset and length. It may only happen if there is a host side bug. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
As defined in hyperv_net.h, the NVSP_STAT_SUCCESS is one not zero. Some functions returns 0 when it actually means NVSP_STAT_SUCCESS. This patch fixes them. In netvsc_receive(), it puts the last RNDIS packet's receive status for all packets in a vmxferpage which may contain multiple RNDIS packets. This patch puts NVSP_STAT_FAIL in the receive completion if one of the packets in a vmxferpage fails. Signed-off-by:
-
David S. Miller authored
Yonghong Song says: ==================== net: permit skb_segment on head_frag frag_list skb One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at function skb_segment(), line 3667. The bpf program attaches to clsact ingress, calls bpf_skb_change_proto to change protocol from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect to send the changed packet out. ... 3665 while (pos < offset + len) { 3666 if (i >= nfrags) { 3667 BUG_ON(skb_headlen(list_skb)); ... The triggering input skb has the following properties: list_skb = skb->frag_list; skb->nfrags != NULL && skb_headlen(list_skb) != 0 and skb_segment() is not able to handle a frag_list skb if its headlen (list_skb->len - list_skb->data_len) is not 0. Patch #1 provides a simple solution to avoid BUG_ON. If list_skb->head_frag is true, its page-backed frag will be processed before the list_skb->frags. Patch #2 provides a test case in test_bpf module which constructs a skb and calls skb_segment() directly. The test case is able to trigger the BUG_ON without Patch #1. The patch has been tested in the following setup: ipv6_host <-> nat_server <-> ipv4_host where nat_server has a bpf program doing ipv4<->ipv6 translation and forwarding through clsact hook bpf_skb_change_proto. Changelog: v5 -> v6: . Added back missed BUG_ON(!nfrags) for zero skb_headlen(skb) case, plus a couple of cosmetic changes, from Alexander. v4 -> v5: . Replace local variable head_frag with a static inline function skb_head_frag_to_page_desc which gets the head_frag on-demand. This makes code more readable and also does not increase the stack size, from Alexander. . Remove the "if(nfrags)" guard for skb_orphan_frags and skb_zerocopy_clone as I found that they can handle zero-frag skb (with non-zero skb_headlen(skb)) properly. . Properly release segment list from skb_segment() in the test, from Eric. v3 -> v4: . Remove dynamic memory allocation and use rewinding for both index and frag to remove one branch in fast path, from Alexander. . Fix a bunch of issues in test_bpf skb_segment() test, including proper way to allocate skb, proper function argument for skb_add_rx_frag and not freeint skb, etc., from Eric. v2 -> v3: . Use starting frag index -1 (instead of 0) to special process head_frag before other frags in the skb, from Alexander Duyck. v1 -> v2: . Removed never-hit BUG_ON, spotted by Linyu Yuan. ==================== Signed-off-by: -
Yonghong Song authored
Without the previous commit, "modprobe test_bpf" will have the following errors: ... [ 98.149165] ------------[ cut here ]------------ [ 98.159362] kernel BUG at net/core/skbuff.c:3667! [ 98.169756] invalid opcode: 0000 [#1] SMP PTI [ 98.179370] Modules linked in: [ 98.179371] test_bpf(+) ... which triggers the bug the previous commit intends to fix. The skbs are constructed to mimic what mlx5 may generate. The packet size/header may not mimic real cases in production. But the processing flow is similar. Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Yonghong Song authored
One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at function skb_segment(), line 3667. The bpf program attaches to clsact ingress, calls bpf_skb_change_proto to change protocol from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect to send the changed packet out. 3472 struct sk_buff *skb_segment(struct sk_buff *head_skb, 3473 netdev_features_t features) 3474 { 3475 struct sk_buff *segs = NULL; 3476 struct sk_buff *tail = NULL; ... 3665 while (pos < offset + len) { 3666 if (i >= nfrags) { 3667 BUG_ON(skb_headlen(list_skb)); 3668 3669 i = 0; 3670 nfrags = skb_shinfo(list_skb)->nr_frags; 3671 frag = skb_shinfo(list_skb)->frags; 3672 frag_skb = list_skb; ... call stack: ... #1 [ffff883ffef03558] __crash_kexec at ffffffff8110c525 #2 [ffff883ffef03620] crash_kexec at ffffffff8110d5cc #3 [ffff883ffef03640] oops_end at ffffffff8101d7e7 #4 [ffff883ffef03668] die at ffffffff8101deb2 #5 [ffff883ffef03698] do_trap at ffffffff8101a700 #6 [ffff883ffef036e8] do_error_trap at ffffffff8101abfe #7 [ffff883ffef037a0] do_invalid_op at ffffffff8101acd0 #8 [ffff883ffef037b0] invalid_op at ffffffff81a00bab [exception RIP: skb_segment+3044] RIP: ffffffff817e4dd4 RSP: ffff883ffef03860 RFLAGS: 00010216 RAX: 0000000000002bf6 RBX: ffff883feb7aaa00 RCX: 0000000000000011 RDX: ffff883fb87910c0 RSI: 0000000000000011 RDI: ffff883feb7ab500 RBP: ffff883ffef03928 R8: 0000000000002ce2 R9: 00000000000027da R10: 000001ea00000000 R11: 0000000000002d82 R12: ffff883f90a1ee80 R13: ffff883fb8791120 R14: ffff883feb7abc00 R15: 0000000000002ce2 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff883ffef03930] tcp_gso_segment at ffffffff818713e7 Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2018-03-23 This series contains updates to ixgbe and ixgbevf only. Paul adds status register reads to reduce a potential race condition where registers can read 0xFFFFFFFF during a PCI reset, which in turn causes the driver to remove the adapter. Then fixes an assignment operation with an "OR" operation. Shannon Nelson provides several IPsec offload cleanups to ixgbe, as well as a patch to enable TSO with IPsec offload. Tony provides the much anticipated XDP support for ixgbevf. Currently, pass, drop and XDP_TX actions are supported, as well as meta data and stats reporting. Björn Töpel tweaks the page counting for XDP_REDIRECT, since a page can have its reference count decreased via the xdp_do_redirect() call. ==================== Signed-off-by: -
David S. Miller authored
Intiyaz Basha says: ==================== liquidio: Tx queue cleanup Moved some common function to octeon_network.h Removed some unwanted functions and checks. ==================== Signed-off-by: -
Intiyaz Basha authored
For consistency renaming txqs_start to start_txqs Signed-off-by:
Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Intiyaz Basha authored
For consistency renaming txqs_stop to stop_txqs Signed-off-by:
-
Intiyaz Basha authored
For consistency renaming txqs_wake to wake_txqs Signed-off-by:
-
Intiyaz Basha authored
Using skb_iq function for deriving queue from skb Signed-off-by:
-
Intiyaz Basha authored
Removing one line function wake_q Signed-off-by:
-
Intiyaz Basha authored
Removing one line function stop_q Signed-off-by:
-
Intiyaz Basha authored
Removing checks for netif_is_multiqueue. Configuring single queue will be a multiqueue netdev with one queues. Signed-off-by:
-
Intiyaz Basha authored
Removing start_txq function from VF and PF files Signed-off-by:
-
Intiyaz Basha authored
Removing one line function stop_txq Signed-off-by:
-
Intiyaz Basha authored
Moving common function skb_iq to to octeon_network.h Signed-off-by:
-
Intiyaz Basha authored
Moving common function txqs_start to octeon_network.h Signed-off-by:
-
Intiyaz Basha authored
Moving common function txqs_wake to octeon_network.h Signed-off-by:
-
Intiyaz Basha authored
Moving common function txqs_stop to octeon_network.h Signed-off-by:
-
- 24 Mar, 2018 1 commit
-
-
Davide Caratti authored
use u16 in place of __be16 to suppress the following sparse warnings: net/sched/act_vlan.c:150:26: warning: incorrect type in assignment (different base types) net/sched/act_vlan.c:150:26: expected restricted __be16 [usertype] push_vid net/sched/act_vlan.c:150:26: got unsigned short net/sched/act_vlan.c:151:21: warning: restricted __be16 degrades to integer net/sched/act_vlan.c:208:26: warning: incorrect type in assignment (different base types) net/sched/act_vlan.c:208:26: expected unsigned short [unsigned] [usertype] tcfv_push_vid net/sched/act_vlan.c:208:26: got restricted __be16 [usertype] push_vid Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
