Enable reading additional EEPROM information from high pages such as
thresholds and alarms on QSFP/QSFP+/QSFP28 modules.

"This is similar to commit a708fb7b ("net/mlx5e: ethtool, Add
support for EEPROM high pages query") but given all the required logic
already exists in mlx4_qsfp_eeprom_params_set() only s/_LEN/MAX_LEN/ is
needed.
Tested-by: Dan Merillat <git@dan.merillat.org>
Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/b17c5336-6dc3-41f2-afa6-f9e79231f224@ans.plSigned-off-by: Jakub Kicinski <kuba@kernel.org>

draft-ietf-6man-pio-pflag is adding a new flag to the Prefix Information
Option to signal that the network can allocate a unique IPv6 prefix per
client via DHCPv6-PD (see draft-ietf-v6ops-dhcp-pd-per-device).

When ra_honor_pio_pflag is enabled, the presence of a P-flag causes
SLAAC autoconfiguration to be disabled for that particular PIO.

An automated test has been added in Android (r.android.com/3195335) to
go along with this change.

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Lamparter <equinox@opensourcerouting.org>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zhengchao Shao says:

====================
net/smc: do some cleanups in smc module

Do some cleanups in smc module.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The input parameter "is_rmb" of the smcr_new_buf_create function
has never been used, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the SMC client perform CLC handshake, it will check whether
the clc header type is correct in receiving SMC_CLC_ACCEPT packet.
The specific invoking path is as follows:
__smc_connect
  smc_connect_clc
    smc_clc_wait_msg
      smc_clc_msg_hdr_valid
        smc_clc_msg_acc_conf_valid
Therefore, the smc_connect_check_aclc interface invoked by
__smc_connect does not need to check type again.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the SMC client begins to connect to server, smcd_version is set
to SMC_V1 + SMC_V2. If fail to get VLAN ID, only SMC_V2 information
is left in smcd_version. And smcd_version will not be changed to 0.
Therefore, remove the fallback caused by the failure to get VLAN ID.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because linux/err.h is unreferenced in smc_loopback.h file, so
remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a schema validator to vitesse,vsc73xx.yaml for MAC-level RGMII delays
in the CPU port. Additionally, valid values for VSC73XX were defined,
and a common definition for the RX and TX valid range was created.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch switches hardcoded RGMII transmit/receive delay to
a configurable value. Delay values are taken from the properties of
the CPU port: 'tx-internal-delay-ps' and 'rx-internal-delay-ps'.

The default value is configured to 2.0 ns to maintain backward
compatibility with existing code.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

James Chapman says:

====================
l2tp: simplify tunnel and session cleanup

This series simplifies and improves l2tp tunnel and session cleanup.

 * refactor l2tp management code to not use the tunnel socket's
   sk_user_data. This allows the tunnel and its socket to be closed
   and freed without sequencing the two using the socket's sk_destruct
   hook.

 * export ip_flush_pending_frames and use it when closing l2tp_ip
   sockets.

 * move the work of closing all sessions in the tunnel to the work
   queue so that sessions are deleted using the same codepath whether
   they are closed by user API request or their parent tunnel is
   closing.

 * refactor l2tp_ppp pppox socket / session relationship to have the
   session keep the socket alive, not the other way around. Previously
   the pppox socket held a ref on the session, which complicated
   session delete by having to go through the pppox socket destructor.

 * free sessions and pppox sockets by rcu.

 * fix a possible tunnel refcount underflow.

 * avoid using rcu_barrier in net exit handler.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the work of closing all tunnels from the pernet exit hook to
pre_exit since the core does rcu synchronisation between these steps
and we can therefore remove rcu_barrier from l2tp code.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp eth/ppp pseudowire setup/cleanup uses kfree() in some error
paths. Drop the refcount instead such that the session object is
always freed when the refcount reaches 0.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_session_register uses an idr_alloc then idr_replace pattern to
insert sessions into the session IDR. To catch invalid locking, add a
WARN_ON_ONCE if the IDR entry is modified by another thread between
alloc and replace steps.

Also add comments to make expectations clear.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_v3_session_htable and tunnel->session_list are read by lockless
getters using RCU. Use rcu list variants when adding or removing list
items.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a session is created, it sets a backpointer to its tunnel. When
the session refcount drops to 0, l2tp_session_free drops the tunnel
refcount if session->tunnel is non-NULL. However, session->tunnel is
set in l2tp_session_create, before the tunnel refcount is incremented
by l2tp_session_register, which leaves a small window where
session->tunnel is non-NULL when the tunnel refcount hasn't been
bumped.

Moving the assignment to l2tp_session_register is trivial but
l2tp_session_create calls l2tp_session_set_header_len which uses
session->tunnel to get the tunnel's encap. Add an encap arg to
l2tp_session_set_header_len to avoid using session->tunnel.

If l2tpv3 sessions have colliding IDs, it is possible for
l2tp_v3_session_get to race with l2tp_session_register and fetch a
session which doesn't yet have session->tunnel set. Add a check for
this case.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each l2tp ppp session has an associated pppox socket. l2tp_ppp uses
the session's pppox socket refcount to manage session lifetimes; the
pppox socket holds a ref on the session which is dropped by the socket
destructor. This complicates session cleanup.

Given l2tp sessions are refcounted, it makes more sense to reverse
this relationship such that the session keeps the socket alive, not
the other way around. So refactor l2tp_ppp to have the session hold a
ref on its socket while it references it. When the session is closed,
it drops its socket ref when it detaches from its socket. If the
socket is closed first, it initiates the closing of its session, if
one is attached. The socket/session can then be freed asynchronously
when their refcounts drop to 0.

Use the session's session_close callback to detach the pppox socket
since this will be done on the work queue together with the rest of
the session cleanup via l2tp_session_delete.

Also, since l2tp_ppp uses the pppox socket's sk_user_data, use the rcu
sk_user_data access helpers when accessing it and set the socket's
SOCK_RCU_FREE flag to have pppox sockets freed by rcu.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp sessions may be accessed under an rcu read lock. Have them freed
via rcu and remove the now unneeded synchronize_rcu when a session is
removed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a tunnel is closed, l2tp_tunnel_closeall closes all sessions in
the tunnel. Move the work of deleting each session to the work queue
so that sessions are deleted using the same codepath whether they are
closed by user API request or their parent tunnel is closing. This
also avoids the locking dance in l2tp_tunnel_closeall where the
tunnel's session list lock was unlocked and relocked in the loop.

In l2tp_exit_net, use drain_workqueue instead of flush_workqueue
because the processing of tunnel_delete work may queue session_delete
work items which must also be processed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the l2tp tunnel socket used sk_user_data to point to its
associated l2tp tunnel, socket and tunnel cleanup had to make use of
the socket's destructor to free the tunnel only when the socket could
no longer be accessed.

Now that sk_user_data is no longer used, we can simplify socket and
tunnel cleanup:

  * If the tunnel closes first, it cleans up and drops its socket ref
    when the tunnel refcount drops to zero. If its socket was provided
    by userspace, the socket is closed and freed asynchronously, when
    userspace closes it. If its socket is a kernel socket, the tunnel
    closes the socket itself during cleanup and drops its socket ref
    when the tunnel's refcount drops to zero.

  * If the socket closes first, we initiate the closing of its
    associated tunnel. For UDP sockets, this is via the socket's
    encap_destroy hook. For L2TPIP sockets, this is via the socket's
    destroy callback. The tunnel holds a socket ref while it
    references the sock. When the tunnel is freed, it drops its socket
    ref and the socket will be cleaned up when its own refcount drops
    to zero, asynchronous to the tunnel free.

  * The tunnel socket destructor is no longer needed since the tunnel
    is no longer freed through the socket destructor.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since l2tp no longer derives tunnel pointers directly via
sk_user_data, it is no longer useful for l2tp to check tunnel pointers
using a magic feather. Drop the tunnel's magic field.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp no longer uses the tunnel socket's sk_user_data so drop the code
which sets it.

In l2tp_validate_socket use l2tp_sk_to_tunnel to check whether a given
socket is already attached to an l2tp tunnel since we can no longer
use non-null sk_user_data to indicate this.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp's ppp procfs output can be used to show internal state of
pppol2tp. It includes a 'user-data-ok' field, which is derived from
the tunnel socket's sk_user_data being non-NULL. Use tunnel->sock
being non-NULL to indicate this instead.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the recently exported ip_flush_pending_frames instead of a
free-coded version and lock the socket while we call it.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To avoid protocol modules implementing their own, export
ip_flush_pending_frames.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_sk_to_tunnel derives the tunnel from sk_user_data. Instead,
lookup the tunnel by walking the tunnel IDR for a tunnel using the
indicated sock. This is slow but l2tp_sk_to_tunnel is not used in
the datapath so performance isn't critical.

l2tp_tunnel_destruct needs a variant of l2tp_sk_to_tunnel which does
not bump the tunnel refcount since the tunnel refcount is already 0.

Change l2tp_sk_to_tunnel sk arg to const since it does not modify sk.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The goo.gl URL shortener is deprecated and is due to stop
expanding existing links in 2025.

Expand the link in Kconfig.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240729205337.48058-1-linux@treblig.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use net_prefetch to remove #ifdef and simplify prefetch logic. This
follows the pattern introduced in a previous commit f468f21b ("net:
Take common prefetch code structure into a function"), which replaced
the same logic in all existing drivers at that time.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240729152651.258713-1-jdamato@fastly.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf and netfilter.

  A lot of networking people were at a conference last week, busy
  catching COVID, so relatively short PR.

  Current release - regressions:

   - tcp: process the 3rd ACK with sk_socket for TFO and MPTCP

  Current release - new code bugs:

   - l2tp: protect session IDR and tunnel session list with one lock,
     make sure the state is coherent to avoid a warning

   - eth: bnxt_en: update xdp_rxq_info in queue restart logic

   - eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field

  Previous releases - regressions:

   - xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len,
     the field reuses previously un-validated pad

  Previous releases - always broken:

   - tap/tun: drop short frames to prevent crashes later in the stack

   - eth: ice: add a per-VF limit on number of FDIR filters

   - af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash"

* tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
  tun: add missing verification for short frame
  tap: add missing verification for short frame
  mISDN: Fix a use after free in hfcmulti_tx()
  gve: Fix an edge case for TSO skb validity check
  bnxt_en: update xdp_rxq_info in queue restart logic
  tcp: process the 3rd ACK with sk_socket for TFO/MPTCP
  selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
  xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
  bpf: Fix a segment issue when downgrading gso_size
  net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling
  MAINTAINERS: make Breno the netconsole maintainer
  MAINTAINERS: Update bonding entry
  net: nexthop: Initialize all fields in dumped nexthops
  net: stmmac: Correct byte order of perfect_match
  selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
  tipc: Return non-zero value from tipc_udp_addr2str() on error
  netfilter: nft_set_pipapo_avx2: disable softinterrupts
  ice: Fix recipe read procedure
  ice: Add a per-VF limit on number of FDIR filters
  net: bonding: correctly annotate RCU in bond_should_notify_peers()
  ...

Pull printk updates from Petr Mladek:

 - trivial printk changes

The bigger "real" printk work is still being discussed.

* tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  vsprintf: add missing MODULE_DESCRIPTION() macro
  printk: Rename console_replay_all() and update context

Pull sysctl constification from Joel Granados:
 "Treewide constification of the ctl_table argument of proc_handlers
  using a coccinelle script and some manual code formatting fixups.

  This is a prerequisite to moving the static ctl_table structs into
  read-only data section which will ensure that proc_handler function
  pointers cannot be modified"

* tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
  sysctl: treewide: constify the ctl_table argument of proc_handlers

Pull EFI fixes from Ard Biesheuvel:

 - Wipe screen_info after allocating it from the heap - used by arm32
   and EFI zboot, other EFI architectures allocate it statically

 - Revert to allocating boot_params from the heap on x86 when entering
   via the native PE entrypoint, to work around a regression on older
   Dell hardware

* tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  x86/efistub: Revert to heap allocated boot_params for PE entrypoint
  efi/libstub: Zero initialize heap allocated struct screen_info

Pull kgdb updates from Daniel Thompson:
 "Three small changes this cycle:

   - Clean up an architecture abstraction that is no longer needed
     because all the architectures have converged.

   - Actually use the prompt argument to kdb_position_cursor() instead
     of ignoring it (functionally this fix is a nop but that was due to
     luck rather than good judgement)

   - Fix a -Wformat-security warning"

* tag 'kgdb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Get rid of redundant kdb_curr_task()
  kdb: Use the passed prompt in kdb_position_cursor()
  kdb: address -Wformat-security warnings

Pull MIPS updates from Thomas Bogendoerfer:

 - Use improved timer sync for Loongson64

 - Fix address of GCR_ACCESS register

 - Add missing MODULE_DESCRIPTION

* tag 'mips_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: sibyte: add missing MODULE_DESCRIPTION() macro
  MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later
  MIPS: Loongson64: Switch to SYNC_R4K

Merge tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:
 "The gettimeofday() and clock_gettime() syscalls are now available as
  vDSO functions, and Dave added a patch which allows to use NVMe cards
  in the PCI slots as fast and easy alternative to SCSI discs.

  Summary:

   - add gettimeofday() and clock_gettime() vDSO functions

   - enable PCI_MSI_ARCH_FALLBACKS to allow PCI to PCIe bridge adaptor
     with PCIe NVME card to function in parisc machines

   - allow users to reduce kernel unaligned runtime warnings

   - minor code cleanups"

* tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Add support for CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
  parisc: Use max() to calculate parisc_tlb_flush_threshold
  parisc: Fix warning at drivers/pci/msi/msi.h:121
  parisc: Add 64-bit gettimeofday() and clock_gettime() vDSO functions
  parisc: Add 32-bit gettimeofday() and clock_gettime() vDSO functions
  parisc: Clean up unistd.h file

Pull UML updates from Richard Weinberger:

 - Support for preemption

 - i386 Rust support

 - Huge cleanup by Benjamin Berg

 - UBSAN support

 - Removal of dead code

* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
  um: vector: always reset vp->opened
  um: vector: remove vp->lock
  um: register power-off handler
  um: line: always fill *error_out in setup_one_line()
  um: remove pcap driver from documentation
  um: Enable preemption in UML
  um: refactor TLB update handling
  um: simplify and consolidate TLB updates
  um: remove force_flush_all from fork_handler
  um: Do not flush MM in flush_thread
  um: Delay flushing syscalls until the thread is restarted
  um: remove copy_context_skas0
  um: remove LDT support
  um: compress memory related stub syscalls while adding them
  um: Rework syscall handling
  um: Add generic stub_syscall6 function
  um: Create signal stack memory assignment in stub_data
  um: Remove stub-data.h include from common-offsets.h
  um: time-travel: fix signal blocking race/hang
  um: time-travel: remove time_exit()
  ...

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big set of driver core changes for 6.11-rc1.

  Lots of stuff in here, with not a huge diffstat, but apis are evolving
  which required lots of files to be touched. Highlights of the changes
  in here are:

   - platform remove callback api final fixups (Uwe took many releases
     to get here, finally!)

   - Rust bindings for basic firmware apis and initial driver-core
     interactions.

     It's not all that useful for a "write a whole driver in rust" type
     of thing, but the firmware bindings do help out the phy rust
     drivers, and the driver core bindings give a solid base on which
     others can start their work.

     There is still a long way to go here before we have a multitude of
     rust drivers being added, but it's a great first step.

   - driver core const api changes.

     This reached across all bus types, and there are some fix-ups for
     some not-common bus types that linux-next and 0-day testing shook
     out.

     This work is being done to help make the rust bindings more safe,
     as well as the C code, moving toward the end-goal of allowing us to
     put driver structures into read-only memory. We aren't there yet,
     but are getting closer.

   - minor devres cleanups and fixes found by code inspection

   - arch_topology minor changes

   - other minor driver core cleanups

  All of these have been in linux-next for a very long time with no
  reported problems"

* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  ARM: sa1100: make match function take a const pointer
  sysfs/cpu: Make crash_hotplug attribute world-readable
  dio: Have dio_bus_match() callback take a const *
  zorro: make match function take a const pointer
  driver core: module: make module_[add|remove]_driver take a const *
  driver core: make driver_find_device() take a const *
  driver core: make driver_[create|remove]_file take a const *
  firmware_loader: fix soundness issue in `request_internal`
  firmware_loader: annotate doctests as `no_run`
  devres: Correct code style for functions that return a pointer type
  devres: Initialize an uninitialized struct member
  devres: Fix memory leakage caused by driver API devm_free_percpu()
  devres: Fix devm_krealloc() wasting memory
  driver core: platform: Switch to use kmemdup_array()
  driver core: have match() callback in struct bus_type take a const *
  MAINTAINERS: add Rust device abstractions to DRIVER CORE
  device: rust: improve safety comments
  MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
  MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
  firmware: rust: improve safety comments
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - make watchdog_class const

 - rework of the rzg2l_wdt driver

 - other small fixes and improvements

* tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  dt-bindings: watchdog: dlg,da9062-watchdog: Drop blank space
  watchdog: rzn1: Convert comma to semicolon
  watchdog: lenovo_se10_wdt: Convert comma to semicolon
  dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
  watchdog: rzg2l_wdt: Add suspend/resume support
  watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
  watchdog: rzg2l_wdt: Remove comparison with zero
  watchdog: rzg2l_wdt: Remove reset de-assert from probe
  watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
  watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
  watchdog: rzg2l_wdt: Make the driver depend on PM
  watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
  watchdog: imx7ulp_wdt: keep already running watchdog enabled
  watchdog: starfive: Add missing clk_disable_unprepare()
  watchdog: Make watchdog_class const

Pull dma-mapping fix from Christoph Hellwig:

 - fix the order of actions in dmam_free_coherent (Lance Richardson)

* tag 'dma-mapping-6.11-2024-07-24' of git://git.infradead.org/users/hch/dma-mapping:
  dma: fix call order in dmam_free_coherent

Dongli Zhang says:

====================
tap/tun: harden by dropping short frame

This is to harden all of tap/tun to avoid any short frame smaller than the
Ethernet header (ETH_HLEN).

While the xen-netback already rejects short frame smaller than ETH_HLEN ...

 914 static void xenvif_tx_build_gops(struct xenvif_queue *queue,
 915                                      int budget,
 916                                      unsigned *copy_ops,
 917                                      unsigned *map_ops)
 918 {
... ...
1007                 if (unlikely(txreq.size < ETH_HLEN)) {
1008                         netdev_dbg(queue->vif->dev,
1009                                    "Bad packet size: %d\n", txreq.size);
1010                         xenvif_tx_err(queue, &txreq, extra_count, idx);
1011                         break;
1012                 }

... the short frame may not be dropped by vhost-net/tap/tun.

This fixes CVE-2024-41090 and CVE-2024-41091.
====================

Link: https://patch.msgid.link/20240724170452.16837-1-dongli.zhang@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The cited commit missed to check against the validity of the frame length
in the tun_xdp_one() path, which could cause a corrupted skb to be sent
downstack. Even before the skb is transmitted, the
tun_xdp_one-->eth_type_trans() may access the Ethernet header although it
can be less than ETH_HLEN. Once transmitted, this could either cause
out-of-bound access beyond the actual length, or confuse the underlayer
with incorrect or inconsistent header length in the skb metadata.

In the alternative path, tun_get_user() already prohibits short frame which
has the length less than Ethernet header size from being transmitted for
IFF_TAP.

This is to drop any frame shorter than the Ethernet header size just like
how tun_get_user() does.

CVE: CVE-2024-41091
Inspired-by: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/
Fixes: 043d222f ("tuntap: accept an array of XDP buffs through sendmsg()")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240724170452.16837-3-dongli.zhang@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>