After commit 040ee612 ("Btrfs: send, improve clone range") we do not
use anymore the data_offset field of struct backref_ctx, as after that we
do all the necessary checks for the data offset of file extent items at
clone_range(). Since there are no more users of data_offset from that
structure, remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Instead of having three 'if' to handle non-NULL return value consolidate
this in one 'if (ret)'. That way the code is more obvious:

 - Always drop delete_unused_bgs_mutex if ret is not NULL
 - If ret is negative -> goto done
 - If it's 1 -> reset ret to 0, release the path and finish the loop.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

I noticed that shared ref entries in ref-verify didn't have the proper
owner set, which caused me to think there was something seriously wrong.
However the problem is if we have a parent we simply weren't filling out
the owner part of the reference, even though we have it.

Fix this by making sure we set all the proper fields when we modify a
reference, this way we'll have the proper owner if a problem happens and
we don't waste time thinking we're updating the wrong level.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

I noticed that sometimes I would have the wrong level printed out with
ref-verify while testing some error injection related problems.  This is
because we only get the level from the main extent item, but our
references could go off the current leaf into another, and at that point
we lose our level.

Fix this by keeping track of the last tree block level that we found,
the same way we keep track of our bytenr and num_bytes, in case we
happen to wander into another leaf while still processing the references
for a bytenr.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

I was attempting to reproduce a problem that Zygo hit, but my error
injection wasn't firing for a few of the common calls to
btrfs_should_cancel_balance.  This is because the compiler decided to
inline it at these spots.  Keep this from happening by explicitly
marking the function as noinline so that error injection will always
work.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The following patches are going to address error handling in relocation,
in order to test those patches I need to be able to inject errors in
btrfs_search_slot and btrfs_cow_block, as we call both of these pretty
often in different cases during relocation.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

It's no longer used. While at it also remove new_dirid in create_subvol
as it's used in a single place and open code it. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Adjust the way free_objectid is being initialized, it now stores
BTRFS_FIRST_FREE_OBJECTID rather than the, somewhat arbitrary,
BTRFS_FIRST_FREE_OBJECTID - 1. This change also has the added benefit
that now it becomes unnecessary to explicitly initialize free_objectid
for a newly create fs root.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This reflects the true purpose of the member as it's being used solely
in context where a new objectid is being allocated. Future changes will
also change the way it's being used to closely follow this semantics.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This better reflects the semantics of the function i.e no search is
performed whatsoever.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This function is used to initialize the in-memory
btrfs_root::highest_objectid member, which is used to get an available
objectid. Rename it to better reflect its semantics.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

First replace all inode instances with a pointer to btrfs_inode. This
removes multiple invocations of the BTRFS_I macro, subsequently remove
2 local variables as they are called only once and simply refer to
them directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Return value in __load_free_space_cache is not properly set after
(unlikely) memory allocation failures and 0 is returned instead.
This is not a problem for the caller load_free_space_cache because only
value 1 is considered as 'cache loaded' but for clarity it's better
to set the errors accordingly.

Fixes: a67509c3 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

While doing error injection I would sometimes get a corrupt file system.
This is because I was injecting errors at btrfs_search_slot, but would
only do it one time per stack.  This uncovered a problem in
commit_fs_roots, where if we get an error we would just break.  However
we're in a nested loop, the first loop being a loop to find all the
dirty fs roots, and then subsequent root updates would succeed clearing
the error value.

This isn't likely to happen in real scenarios, however we could
potentially get a random ENOMEM once and then not again, and we'd end up
with a corrupted file system.  Fix this by moving the error checking
around a bit to the main loop, as this is the only place where something
will fail, and return the error as soon as it occurs.

With this patch my reproducer no longer corrupts the file system.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull tracing fix from Steven Rostedt:
 "Fix output of top level event tracing 'enable' file.

  When writing a tool for enabling events in the tracing system, an
  anomaly was discovered. The top level event 'enable' file would never
  show '1' when all events were enabled.

  The system and event 'enable' files worked as expected.

  The reason was because the top level event 'enable' file included the
  'ftrace' tracer events, which are not controlled by the 'enable' file
  and would cause the output to be wrong. This appears to have been a
  bug since it was created"

* tag 'trace-v5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Do not count ftrace events in top level enable output

Pull libnvdimm fixes from Dan Williams:
 "A fix for a crash scenario that has been present since the initial
  merge, a minor regression in sysfs attribute visibility, and a fix for
  some flexible array warnings.

  The bulk of this pull is an update to the libnvdimm unit test
  infrastructure to test non-ACPI platforms. Given there is zero
  regression risk for test updates, and the tests enable validation of
  bits headed towards the next merge window, I saw no reason to hold the
  new tests back. Santosh originally submitted this before the v5.11
  window opened.

  Summary:

   - Fix a crash when sysfs accesses race 'dimm' driver probe/remove.

   - Fix a regression in 'resource' attribute visibility necessary for
     mapping badblocks and other physical address interrogations.

   - Fix some flexible array warnings

   - Expand the unit test infrastructure for non-ACPI platforms"

* tag 'libnvdimm-fixes-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/dimm: Avoid race between probe and available_slots_show()
  ndtest: Add papr health related flags
  ndtest: Add nvdimm control functions
  ndtest: Add regions and mappings to the test buses
  ndtest: Add dimm attributes
  ndtest: Add dimms to the two buses
  ndtest: Add compatability string to treat it as PAPR family
  testing/nvdimm: Add test module for non-nfit platforms
  libnvdimm/namespace: Fix visibility of namespace resource attribute
  libnvdimm/pmem: Remove unused header
  ACPI: NFIT: Fix flexible_array.cocci warnings

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a 32 vs 64-bit padding issue in the new benchmark code (Barry
  Song)"

* tag 'dma-mapping-5.11-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: benchmark: use u8 for reserved field in uAPI structure

Pull irq fixes from Borislav Petkov:

 - Prevent device managed IRQ allocation helpers from returning IRQ 0

 - A fix for MSI activation of PCI endpoints with multiple MSIs

* tag 'irq_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Prevent [devm_]irq_alloc_desc from returning irq 0
  genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set

Pull syscall entry fixes from Borislav Petkov:

 - For syscall user dispatch, separate prctl operation from syscall
   redirection range specification before the API has been made official
   in 5.11.

 - Ensure tasks using the generic syscall code do trap after returning
   from a syscall when single-stepping is requested.

* tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Use different define for selector variable in SUD
  entry: Ensure trap after single-step on system call return

Pull scheduler fix from Borislav Petkov:
 "Revert an attempt to not spread IRQ threads on isolated CPUs which has
  a bunch of problems"

* tag 'sched_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "lib: Restrict cpumask_local_spread to houskeeping CPUs"

Pull timer fixes from Borislav Petkov:
 "Two more timers-related fixes for v5.11:

   - Use a freezable workqueue for RTC sync because the sync can happen
     at any time and trigger suspend assertion checks in the i2c
     subsystem.

   - Correct a previous RTC validation change to check only bit 6 in
     register D because some Intel machines use bits 0-5"

* tag 'timers_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Use freezable workqueue for RTC synchronization
  rtc: mc146818: Dont test for bit 0-5 in Register D

Pull x86 fixes from Borislav Petkov:
 "I hope this is the last batch of x86/urgent updates for this round:

   - Remove superfluous EFI PGD range checks which lead to those
     assertions failing with certain kernel configs and LLVM.

   - Disable setting breakpoints on facilities involved in #DB exception
     handling to avoid infinite loops.

   - Add extra serialization to non-serializing MSRs (IA32_TSC_DEADLINE
     and x2 APIC MSRs) to adhere to SDM's recommendation and avoid any
     theoretical issues.

   - Re-add the EPB MSR reading on turbostat so that it works on older
     kernels which don't have the corresponding EPB sysfs file.

   - Add Alder Lake to the list of CPUs which support split lock.

   - Fix %dr6 register handling in order to be able to set watchpoints
     with gdb again.

   - Disable CET instrumentation in the kernel so that gcc doesn't add
     ENDBR64 to kernel code and thus confuse tracing"

* tag 'x86_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Remove EFI PGD build time checks
  x86/debug: Prevent data breakpoints on cpu_dr7
  x86/debug: Prevent data breakpoints on __per_cpu_offset
  x86/apic: Add extra serialization for non-serializing MSRs
  tools/power/turbostat: Fallback to an MSR read for EPB
  x86/split_lock: Enable the split lock feature on another Alder Lake CPU
  x86/debug: Fix DR6 handling
  x86/build: Disable CET instrumentation in the kernel

Merge tag 'kbuild-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Use the 'python3' command to invoke python scripts because some
   distributions do not provide the 'python' command any more.

 - Clean-up and update documents

 - Use pkg-config to search libcrypto

 - Fix duplicated debug flags

 - Ignore some more stubs in scripts/kallsyms.c

* tag 'kbuild-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kallsyms: fix nonconverging kallsyms table with lld
  kbuild: fix duplicated flags in DEBUG_CFLAGS
  scripts/clang-tools: switch explicitly to Python 3
  kbuild: remove PYTHON variable
  Documentation/llvm: Add a section about supported architectures
  Revert "checkpatch: add check for keyword 'boolean' in Kconfig definitions"
  scripts: use pkg-config to locate libcrypto
  kconfig: mconf: fix HOSTCC call
  doc: gcc-plugins: update gcc-plugins.rst
  kbuild: simplify GCC_PLUGINS enablement in dummy-tools/gcc
  Documentation/Kbuild: Remove references to gcc-plugin.sh
  scripts: switch explicitly to Python 3

Pull cifs fixes from Steve French:
 "Three small smb3 fixes for stable"

* tag '5.11-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: report error instead of invalid when revalidating a dentry fails
  smb3: fix crediting for compounding when only one request in flight
  smb3: Fix out-of-bounds bug in SMB2_negotiate()

Pull RISC-V fixes from Palmer Dabbelt:
 "A handful of fixes for this week:

   - A fix to avoid evalating the VA twice in virt_addr_valid, which
     fixes some WARNs under DEBUG_VIRTUAL.

   - Two fixes related to STRICT_KERNEL_RWX: one that fixes some
     permissions when strict is disabled, and one to fix some alignment
     issues when strict is enabled.

   - A fix to disallow the selection of MAXPHYSMEM_2GB on RV32, which
     isn't valid any more but may still show up in some oldconfigs.

  We still have the HiFive Unleashed ethernet phy reset regression, so
  there will likely be something coming next week"

* tag 'riscv-for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Define MAXPHYSMEM_1GB only for RV32
  riscv: Align on L1_CACHE_BYTES when STRICT_KERNEL_RWX
  RISC-V: Fix .init section permission update
  riscv: virt_addr_valid must check the address belongs to linear mapping

Pull powerpc fixes from Michael Ellerman:

 - A fix for a change we made to __kernel_sigtramp_rt64() which confused
   glibc's backtrace logic, and also changed the semantics of that
   symbol, which was arguably an ABI break.

 - A fix for a stack overwrite in our VSX instruction emulation.

 - A couple of fixes for the Makefile logic in the new C VDSO.

Thanks to Masahiro Yamada, Naveen N.  Rao, Raoni Fassina Firmino, and
Ravi Bangoria.

* tag 'powerpc-5.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics
  powerpc/vdso64: remove meaningless vgettimeofday.o build rule
  powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o
  powerpc/sstep: Fix array out of bound warning

Pull ARM fixes from Russell King:

 - Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
   accessors that affects GCC >= 4.9.2

 - Fix misplaced tegra_uart_config in decompressor

 - Ensure signal page contents are initialised

 - Fix kexec oops

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: kexec: fix oops after TLB are invalidated
  ARM: ensure the signal page contains defined contents
  ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
  ARM: footbridge: fix dc21285 PCI configuration accessors

Pull USB fixes from Greg KH:
 "Here are some small, last-minute, USB driver fixes for 5.11-rc7

  They all resolve issues reported, or are a few new device ids for some
  drivers. They include:

   - new device ids for some usb-serial drivers

   - xhci fixes for a variety of reported problems

   - dwc3 driver bugfixes

   - dwc2 driver bugfixes

   - usblp driver bugfix

   - thunderbolt bugfix

   - few other tiny fixes

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc2: Fix endpoint direction check in ep_from_windex
  usb: dwc3: fix clock issue during resume in OTG mode
  xhci: fix bounce buffer usage for non-sg list case
  usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720
  usb: xhci-mtk: break loop when find the endpoint to drop
  usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints
  usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()
  USB: gadget: legacy: fix an error code in eth_bind()
  thunderbolt: Fix possible NULL pointer dereference in tb_acpi_add_link()
  USB: serial: option: Adding support for Cinterion MV31
  usb: xhci-mtk: fix unreleased bandwidth data
  usb: gadget: aspeed: add missing of_node_put
  USB: usblp: don't call usb_set_interface if there's a single alt
  USB: serial: cp210x: add pid/vid for WSDA-200-USB
  USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000

Pull input fixes from Dmitry Torokhov:
 "Nothing terribly interesting, just a few fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - sync supported devices with fork on GitHub
  Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table
  Input: goodix - add support for Goodix GT9286 chip
  dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC
  dt-bindings: input: adc-keys: clarify description
  Input: ili210x - implement pressure reporting for ILI251x
  Input: i8042 - unbreak Pegatron C15B
  Input: st1232 - wait until device is ready before reading resolution
  Input: st1232 - do not read more bytes than needed
  Input: st1232 - fix off-by-one error in resolution handling

Pull SCSI fix from James Bottomley:
 "One fix in drivers (lpfc) that stops an oops on resource exhaustion"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix EEH encountering oops with NVMe traffic

Pull block fixes from Jens Axboe:
 "A few small regression fixes:

   - NVMe pull request from Christoph:
       - more quirks for buggy devices (Thorsten Leemhuis, Claus Stovgaard)
       - update the email address for Keith (Keith Busch)
       - fix an out of bounds access in nvmet-tcp (Sagi Grimberg)

   - Regression fix for BFQ shallow depth calculations introduced in
     this merge window (Lin)"

* tag 'block-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
  nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUs
  bfq-iosched: Revert "bfq: Fix computation of shallow depth"
  update the email address for Keith Bush
  nvme-pci: ignore the subsysem NQN on Phison E16
  nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs

Pull io_uring fixes from Jens Axboe:
 "Two small fixes that should go into 5.11:

   - task_work resource drop fix (Pavel)

   - identity COW fix (Xiaoguang)"

* tag 'io_uring-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
  io_uring: drop mm/files between task_work_submit
  io_uring: don't modify identity's files uncess identity is cowed

With CONFIG_X86_5LEVEL, CONFIG_UBSAN and CONFIG_UBSAN_UNSIGNED_OVERFLOW
enabled, clang fails the build with

  x86_64-linux-ld: arch/x86/platform/efi/efi_64.o: in function `efi_sync_low_kernel_mappings':
  efi_64.c:(.text+0x22c): undefined reference to `__compiletime_assert_354'

which happens due to -fsanitize=unsigned-integer-overflow being enabled:

  -fsanitize=unsigned-integer-overflow: Unsigned integer overflow, where
  the result of an unsigned integer computation cannot be represented
  in its type. Unlike signed integer overflow, this is not undefined
  behavior, but it is often unintentional. This sanitizer does not check
  for lossy implicit conversions performed before such a computation
  (see -fsanitize=implicit-conversion).

and that fires when the (intentional) EFI_VA_START/END defines overflow
an unsigned long, leading to the assertion expressions not getting
optimized away (on GCC they do)...

However, those checks are superfluous: the runtime services mapping
code already makes sure the ranges don't overshoot EFI_VA_END as the
EFI mapping range is hardcoded. On each runtime services call, it is
switched to the EFI-specific PGD and even if mappings manage to escape
that last PGD, this won't remain unnoticed for long.

So rip them out.

See https://github.com/ClangBuiltLinux/linux/issues/256 for more info.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: http://lkml.kernel.org/r/20210107223424.4135538-1-arnd@kernel.org

Michael Kerrisk suggested that, from an API perspective, it is a bad
idea to share the PR_SYS_DISPATCH_ defines between the prctl operation
and the selector variable.

Therefore, define two new constants to be used by SUD's selector variable
and update the corresponding documentation and test cases.

While this changes the API syscall user dispatch has never been part of a
Linux release, it will show up for the first time in 5.11.
Suggested-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210205184321.2062251-1-krisman@collabora.com

Commit 29915524 ("entry: Drop usage of TIF flags in the generic syscall
code") introduced a bug on architectures using the generic syscall entry
code, in which processes stopped by PTRACE_SYSCALL do not trap on syscall
return after receiving a TIF_SINGLESTEP.

The reason is that the meaning of TIF_SINGLESTEP flag is overloaded to
cause the trap after a system call is executed, but since the above commit,
the syscall call handler only checks for the SYSCALL_WORK flags on the exit
work.

Split the meaning of TIF_SINGLESTEP such that it only means single-step
mode, and create a new type of SYSCALL_WORK to request a trap immediately
after a syscall in single-step mode.  In the current implementation, the
SYSCALL_WORK flag shadows the TIF_SINGLESTEP flag for simplicity.

Update x86 to flip this bit when a tracer enables single stepping.

Fixes: 29915524 ("entry: Drop usage of TIF flags in the generic syscall code")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Link: https://lore.kernel.org/r/87h7mtc9pr.fsf_-_@collabora.com

This reverts commit 1abdfe70.

This change is broken and not solving any problem it claims to solve.

Robin reported that cpumask_local_spread() now returns any cpu out of
cpu_possible_mask in case that NOHZ_FULL is disabled (runtime or compile
time). It can also return any offline or not-present CPU in the
housekeeping mask. Before that it was returning a CPU out of
online_cpu_mask.

While the function is racy against CPU hotplug if the caller does not
protect against it, the actual use cases are not caring much about it as
they use it mostly as hint for:

 - the user space affinity hint which is unused by the kernel
 - memory node selection which is just suboptimal
 - network queue affinity which might fail but is handled gracefully

But the occasional fail vs. hotplug is very different from returning
anything from possible_cpu_mask which can have a large amount of offline
CPUs obviously.

The changelog of the commit claims:

 "The current implementation of cpumask_local_spread() does not respect
  the isolated CPUs, i.e., even if a CPU has been isolated for Real-Time
  task, it will return it to the caller for pinning of its IRQ
  threads. Having these unwanted IRQ threads on an isolated CPU adds up
  to a latency overhead."

The only correct part of this changelog is:

 "The current implementation of cpumask_local_spread() does not respect
  the isolated CPUs."

Everything else is just disjunct from reality.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: abelits@marvell.com
Cc: davem@davemloft.net
Link: https://lore.kernel.org/r/87y2g26tnt.fsf@nanos.tec.linutronix.de

Merge misc fixes from Andrew Morton:
 "18 patches.

  Subsystems affected by this patch series: mm (hugetlb, compaction,
  vmalloc, shmem, memblock, pagecache, kasan, and hugetlb), mailmap,
  gcov, ubsan, and MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS/.mailmap: use my @kernel.org address
  mm: hugetlb: fix missing put_page in gather_surplus_pages()
  ubsan: implement __ubsan_handle_alignment_assumption
  kasan: make addr_has_metadata() return true for valid addresses
  kasan: add explicit preconditions to kasan_report()
  mm/filemap: add missing mem_cgroup_uncharge() to __add_to_page_cache_locked()
  mailmap: add entries for Manivannan Sadhasivam
  mailmap: fix name/email for Viresh Kumar
  memblock: do not start bottom-up allocations with kernel_end
  mm: thp: fix MADV_REMOVE deadlock on shmem THP
  init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcov
  mm/vmalloc: separate put pages and flush VM flags
  mm, compaction: move high_pfn to the for loop scope
  mm: migrate: do not migrate HugeTLB page whose refcount is one
  mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active
  mm: hugetlb: fix a race between isolating and freeing page
  mm: hugetlb: fix a race between freeing and dissolving the page
  mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page

The file /sys/kernel/tracing/events/enable is used to enable all events by
echoing in "1", or disabling all events when echoing in "0". To know if all
events are enabled, disabled, or some are enabled but not all of them,
cating the file should show either "1" (all enabled), "0" (all disabled), or
"X" (some enabled but not all of them). This works the same as the "enable"
files in the individule system directories (like tracing/events/sched/enable).

But when all events are enabled, the top level "enable" file shows "X". The
reason is that its checking the "ftrace" events, which are special events
that only exist for their format files. These include the format for the
function tracer events, that are enabled when the function tracer is
enabled, but not by the "enable" file. The check includes these events,
which will always be disabled, and even though all true events are enabled,
the top level "enable" file will show "X" instead of "1".

To fix this, have the check test the event's flags to see if it has the
"IGNORE_ENABLE" flag set, and if so, not test it.

Cc: stable@vger.kernel.org
Fixes: 553552ce ("tracing: Combine event filter_active and enable into single flags field")
Reported-by: "Yordan Karadzhov (VMware)" <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since commit a85a6c86 ("driver core: platform: Clarify that IRQ 0
is invalid"), having a linux-irq with number 0 will trigger a WARN()
when calling platform_get_irq*() to retrieve that linux-irq.

Since [devm_]irq_alloc_desc allocs a single irq and since irq 0 is not used
on some systems, it can return 0, triggering that WARN(). This happens
e.g. on Intel Bay Trail and Cherry Trail devices using the LPE audio engine
for HDMI audio:

 0 is an invalid IRQ number
 WARNING: CPU: 3 PID: 472 at drivers/base/platform.c:238 platform_get_irq_optional+0x108/0x180
 Modules linked in: snd_hdmi_lpe_audio(+) ...

 Call Trace:
  platform_get_irq+0x17/0x30
  hdmi_lpe_audio_probe+0x4a/0x6c0 [snd_hdmi_lpe_audio]

 ---[ end trace ceece38854223a0b ]---

Change the 'from' parameter passed to __[devm_]irq_alloc_descs() by the
[devm_]irq_alloc_desc macros from 0 to 1, so that these macros will no
longer return 0.

Fixes: a85a6c86 ("driver core: platform: Clarify that IRQ 0 is invalid")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201221185647.226146-1-hdegoede@redhat.com