This allows taprio to offload the schedule enforcement to capable
network cards, resulting in more precise windows and less CPU usage.

The gate mask acts on traffic classes (groups of queues of same
priority), as specified in IEEE 802.1Q-2018, and following the existing
taprio and mqprio semantics.
It is up to the driver to perform conversion between tc and individual
netdev queues if for some reason it needs to make that distinction.

Full offload is requested from the network interface by specifying
"flags 2" in the tc qdisc creation command, which in turn corresponds to
the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit.

The important detail here is the clockid which is implicitly /dev/ptpN
for full offload, and hence not configurable.

A reference counting API is added to support the use case where Ethernet
drivers need to keep the taprio offload structure locally (i.e. they are
a multi-port switch driver, and configuring a port depends on the
settings of other ports as well). The refcount_t variable is kept in a
private structure (__tc_taprio_qopt_offload) and not exposed to drivers.

In the future, the private structure might also be expanded with a
backpointer to taprio_sched *q, to implement the notification system
described in the patch (of when admin became oper, or an error occurred,
etc, so the offload can be monitored with 'tc qdisc show').
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the phylink documentation to make it clear that phylink is
designed to be used on the MAC facing side of the link, rather than
between a SFP and PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: error recovery follow-up patches.

A follow-up patchset for the recently added health and error recovery
feature.  The first fix is to prevent .ndo_set_rx_mode() from proceeding
when reset is in progress.  The 2nd fix is for the firmware coredump
command.  The 3rd and 4th patches update the error recovery process
slightly to add a state that polls and waits for the firmware to be down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This new state is required when firmware indicates that the error
recovery process requires polling for firmware state to be completely
down before initiating reset.  For example, firmware may take some
time to collect the crash dump before it is down and ready to be
reset.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some error recovery updates to the spec., among other minor changes.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Firmware coredump messages take much longer than standard messages,
so increase the timeout accordingly.

Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check the BNXT_STATE_OPEN flag instead of netif_running() in
bnxt_set_rx_mode().  If the driver is going through any reset, such
as firmware reset or even TX timeout, it may not be ready to set the RX
mode and may crash.  The new rx mode settings will be picked up when
the device is opened again later.

Fixes: 230d1f0d ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neal Cardwell mentioned that snd_wnd would be useful for diagnosing TCP
performance problems --
> (1) Usually when we're diagnosing TCP performance problems, we do so
> from the sender, since the sender makes most of the
> performance-critical decisions (cwnd, pacing, TSO size, TSQ, etc).
> From the sender-side the thing that would be most useful is to see
> tp->snd_wnd, the receive window that the receiver has advertised to
> the sender.

This serves the purpose of adding an additional __u32 to avoid the
would-be hole caused by the addition of the tcpi_rcvi_ooopack field.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For receive-heavy cases on the server-side, we want to track the
connection quality for individual client IPs. This counter, similar to
the existing system-wide TCPOFOQueue counter in /proc/net/netstat,
tracks out-of-order packet reception. By providing this counter in
TCP_INFO, it will allow understanding to what degree receive-heavy
sockets are experiencing out-of-order delivery and packet drops
indicating congestion.

Please note that this is similar to the counter in NetBSD TCP_INFO, and
has the same name.

Also note that we avoid increasing the size of the tcp_sock struct by
taking advantage of a hole.
Signed-off-by: Thomas Higdon <tph@fb.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MDIO device reset line is optional and now that gpiod_get_optional()
returns proper value when GPIO support is compiled out, there is no
reason to use fwnode_get_named_gpiod() that I plan to hide away.

Let's switch to using more standard gpiod_get_optional() and
gpiod_set_consumer_name() to keep the nice "PHY reset" label.

Also there is no reason to only try to fetch the reset GPIO when we have
OF node, gpiolib can fetch GPIO data from firmwares as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2019-09-16

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Now that initial BPF backend for gcc has been merged upstream, enable
   BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to
   bpf_sysctl.file_pos, from Ilya.

2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions
   related to recent work on exposing BTF info through sysfs, from Andrii.

3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem
   headroom to be added twice, from Ciara.

4) Refactoring work to convert sock opt tests into test_progs framework
   in BPF kselftests, from Stanislav.

5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke.

6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

"ctx:file_pos sysctl:read write ok" fails on s390 with "Read value  !=
nux". This is because verifier rewrites a complete 32-bit
bpf_sysctl.file_pos update to a partial update of the first 32 bits of
64-bit *bpf_sysctl_kern.ppos, which is not correct on big-endian
systems.

Fix by using an offset on big-endian systems.

Ditto for bpf_sysctl.file_pos reads. Currently the test does not detect
a problem there, since it expects to see 0, which it gets with high
probability in error cases, so change it to seek to offset 3 and expect
3 in bpf_sysctl.file_pos.

Fixes: e1550bfe ("bpf: Add file_pos field to bpf_sysctl ctx")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190816105300.49035-1-iii@linux.ibm.com/

syzbot found a crash in dev_map_hash_update_elem(), when replacing an
element with a new one. Jesper correctly identified the cause of the crash
as a race condition between the initial lookup in the map (which is done
before taking the lock), and the removal of the old element.

Rather than just add a second lookup into the hashmap after taking the
lock, fix this by reworking the function logic to take the lock before the
initial lookup.

Fixes: 6f9d451a ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-and-tested-by: syzbot+4e7a85b1432052e8d6f8@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Ciara Loftus says:

====================
This patch set contains some fixes for AF_XDP zero copy in the i40e and
ixgbe drivers as well as a fix for the 'xdpsock' sample application when
running in unaligned mode.

Patches 1 and 2 fix a regression for the i40e and ixgbe drivers which
caused the umem headroom to be added to the xdp handle twice, resulting in
an incorrect value being received by the user for the case where the umem
headroom is non-zero.

Patch 3 fixes an issue with the xdpsock sample application whereby the
start of the tx packet data (offset) was not being set correctly when the
application was being run in unaligned mode.

This patch set has been applied against commit a2c11b03 ("kcm: use
BPF_PROG_RUN")
====================
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Preserve the offset of the address of the received descriptor, and include
it in the address set for the tx descriptor, so the kernel can correctly
locate the start of the packet data.

Fixes: 03895e63 ("samples/bpf: add buffer recycling for unaligned chunks to xdpsock")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 7cbbf9f1 ("ixgbe: fix xdp handle calculations") reintroduced
the addition of the umem headroom to the xdp handle in the ixgbe_zca_free,
ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc functions. However,
the headroom is already added to the handle in the function
ixgbe_run_xdp_zc. This commit removes the latter addition and fixes the
case where the headroom is non-zero.

Fixes: 7cbbf9f1 ("ixgbe: fix xdp handle calculations")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 4c5d9a7f ("i40e: fix xdp handle calculations") reintroduced
the addition of the umem headroom to the xdp handle in the i40e_zca_free,
i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc functions. However,
the headroom is already added to the handle in the function i40_run_xdp_zc.
This commit removes the latter addition and fixes the case where the
headroom is non-zero.

Fixes: 4c5d9a7f ("i40e: fix xdp handle calculations")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Now that binutils and gcc support for BPF is upstream, make use of it in
BPF selftests using alu32-like approach. Share as much as possible of
CFLAGS calculation with clang.

Fixes only obvious issues, leaving more complex ones for later:
- Use gcc-provided bpf-helpers.h instead of manually defining the
  helpers, change bpf_helpers.h include guard to avoid conflict.
- Include <linux/stddef.h> for __always_inline.
- Add $(OUTPUT)/../usr/include to include path in order to use local
  kernel headers instead of system kernel headers when building with O=.

In order to activate the bpf-gcc support, one needs to configure
binutils and gcc with --target=bpf and make them available in $PATH. In
particular, gcc must be installed as `bpf-gcc`, which is the default.

Right now with binutils 25a2915e8dba and gcc r275589 only a handful of
tests work:

	# ./test_progs_bpf_gcc
	# Summary: 7/39 PASSED, 1 SKIPPED, 98 FAILED

The reason for those failures are as follows:

- Build errors:
  - `error: too many function arguments for eBPF` for __always_inline
    functions read_str_var and read_map_var - must be inlining issue,
    and for process_l3_headers_v6, which relies on optimizing away
    function arguments.
  - `error: indirect call in function, which are not supported by eBPF`
    where there are no obvious indirect calls in the source calls, e.g.
    in __encap_ipip_none.
  - `error: field 'lock' has incomplete type` for fields of `struct
    bpf_spin_lock` type - bpf_spin_lock is re#defined by bpf-helpers.h,
    so its usage is sensitive to order of #includes.
  - `error: eBPF stack limit exceeded` in sysctl_tcp_mem.
- Load errors:
  - Missing object files due to above build errors.
  - `libbpf: failed to create map (name: 'test_ver.bss')`.
  - `libbpf: object file doesn't contain bpf program`.
  - `libbpf: Program '.text' contains unrecognized relo data pointing to
    section 0`.
  - `libbpf: BTF is required, but is missing or corrupted` - no BTF
    support in gcc yet.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The socfpga sub-driver defines an `interface` field in the `socfpga_dwmac`
struct and parses it on init.

The shared `stmmac_probe_config_dt()` function also parses this from the
device-tree and makes it available on the returned `plat_data` (which is
the same data available via `netdev_priv()`).

All that's needed now is to dig that information out, via some
`dev_get_drvdata()` && `netdev_priv()` calls and re-use it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
More fixes for unlocked cls hardware offload API refactoring

Two fixes for my "Refactor cls hardware offload API to support
rtnl-independent drivers" series and refactoring patch that implements
infrastructure necessary for the fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When filling in hardware intermediate representation tc_setup_flow_action()
directly obtains, checks and takes reference to dev used by mirred action,
instead of using act->ops->get_dev() API created specifically for this
purpose. In order to remove code duplication, refactor flow_action infra to
use action API when obtaining mirred action target dev. Extend get_dev()
with additional argument that is used to provide dev destructor to the
user.

Fixes: 5a6ff4b1 ("net: sched: take reference to action dev before calling offloads")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With recent patch set that removed rtnl lock dependency from cls hardware
offload API rtnl lock is only taken when reading action data and can be
released after action-specific data is parsed into intermediate
representation. However, sample action psample group is passed by pointer
without obtaining reference to it first, which makes it possible to
concurrently overwrite the action and deallocate object pointed by
psample_group pointer after rtnl lock is released but before driver
finished using the pointer.

To prevent such race condition, obtain reference to psample group while it
is used by flow_action infra. Extend psample API with function
psample_group_take() that increments psample group reference counter.
Extend struct tc_action_ops with new get_psample_group() API. Implement the
API for action sample using psample_group_take() and already existing
psample_group_put() as a destructor. Use it in tc_setup_flow_action() to
take reference to psample group pointed to by entry->sample.psample_group
and release it in tc_cleanup_flow_action().

Disable bh when taking psample_groups_lock. The lock is now taken while
holding action tcf_lock that is used by data path and requires bh to be
disabled, so doing the same for psample_groups_lock is necessary to
preserve SOFTIRQ-irq-safety.

Fixes: 918190f5 ("net: sched: flower: don't take rtnl lock for cls hw offloads API")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Generalize flow_action_entry cleanup by extending the structure with
pointer to destructor function. Set the destructor in
tc_setup_flow_action(). Refactor tc_cleanup_flow_action() to call
entry->destructor() instead of using switch that dispatches by entry->id
and manually executes cleanup.

This refactoring is necessary for following patches in this series that
require destructor to use tc_action->ops callbacks that can't be easily
obtained in tc_cleanup_flow_action().
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using static analysis, I discovered that the "dpriv->pci_priv->pdev"
pointer is always NULL.  This pointer was supposed to be initialized
during probe and is essential for the driver to work.  It would be easy
to add a "ppriv->pdev = pdev;" to dscc4_found1() but this driver has
been broken since before we started using git and no one has complained
so probably we should just remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a DP_VERBOSE debug message. Fix it.
(Using American English spelling as this is the most common way
to spell this in the kernel).
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring the per-port egress flooding control for
both Unicast and Multicast traffic.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor overlapping changes in the btusb and ixgbe drivers.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull kvm fixes from Paolo Bonzini:
 "The main change here is a revert of reverts. We recently simplified
  some code that was thought unnecessary; however, since then KVM has
  grown quite a few cond_resched()s and for that reason the simplified
  code is prone to livelocks---one CPUs tries to empty a list of guest
  page tables while the others keep adding to them. This adds back the
  generation-based zapping of guest page tables, which was not
  unnecessary after all.

  On top of this, there is a fix for a kernel memory leak and a couple
  of s390 fixlets as well"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
  KVM: x86: work around leak of uninitialized stack contents
  KVM: nVMX: handle page fault in vmread
  KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl
  KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()

Pull virtio fix from Michael Tsirkin:
 "A last minute revert

  The 32-bit build got broken by the latest defence in depth patch.
  Revert and we'll try again in the next cycle"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  Revert "vhost: block speculation of translated descriptors"

Pull RISC-V fix from Paul Walmsley:
 "Last week, Palmer and I learned that there was an error in the RISC-V
  kernel image header format that could make it less compatible with the
  ARM64 kernel image header format. I had missed this error during my
  original reviews of the patch.

  The kernel image header format is an interface that impacts
  bootloaders, QEMU, and other user tools. Those packages must be
  updated to align with whatever is merged in the kernel. We would like
  to avoid proliferating these image formats by keeping the RISC-V
  header as close as possible to the existing ARM64 header. Since the
  arch/riscv patch that adds support for the image header was merged
  with our v5.3-rc1 pull request as commit 0f327f2a ("RISC-V: Add
  an Image header that boot loader can parse."), we think it wise to try
  to fix this error before v5.3 is released.

  The fix itself should be backwards-compatible with any project that
  has already merged support for premature versions of this interface.
  It primarily involves ensuring that the RISC-V image header has
  something useful in the same field as the ARM64 image header"

* tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: modify the Image header to improve compatibility with the ARM64 header

This reverts commit a89db445.

I was hasty to include this patch, and it breaks the build on 32 bit.
Defence in depth is good but let's do it properly.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull networking fixes from David Miller:

 1) Don't corrupt xfrm_interface parms before validation, from Nicolas
    Dichtel.

 2) Revert use of usb-wakeup in btusb, from Mario Limonciello.

 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
    Leonardo Bras.

 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.

 5) Missing ULP check in sock_map, from John Fastabend.

 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.

 7) Fix length of SKB allocated in 6pack driver, from Christophe
    JAILLET.

 8) ip6_route_info_create() returns an error pointer, not NULL. From
    Maciej Żenczykowski.

 9) Only add RDS sock to the hashes after rs_transport is set, from
    Ka-Cheong Poon.

10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.

11) Presence of transmit IPSEC offload in an SKB is not tested for
    correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
    Kirsher.

12) Need rcu_barrier() when register_netdevice() takes one of the
    notifier based failure paths, from Subash Abhinov Kasiviswanathan.

13) Fix leak in sctp_do_bind(), from Mao Wenan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  cdc_ether: fix rndis support for Mediatek based smartphones
  sctp: destroy bucket if failed to bind addr
  sctp: remove redundant assignment when call sctp_get_port_local
  sctp: change return type of sctp_get_port_local
  ixgbevf: Fix secpath usage for IPsec Tx offload
  sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
  ixgbe: Fix secpath usage for IPsec TX offload.
  net: qrtr: fix memort leak in qrtr_tun_write_iter
  net: Fix null de-reference of device refcount
  ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
  tun: fix use-after-free when register netdev failed
  tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
  ixgbe: fix double clean of Tx descriptors with xdp
  ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
  mlx4: fix spelling mistake "veify" -> "verify"
  net: hns3: fix spelling mistake "undeflow" -> "underflow"
  net: lmc: fix spelling mistake "runnin" -> "running"
  NFC: st95hf: fix spelling mistake "receieve" -> "receive"
  net/rds: An rds_sock is added too early to the hash table
  mac80211: Do not send Layer 2 Update frame before authorization
  ...

Pull MMC fixes from Ulf Hansson:

 - tmio: Fixup runtime PM management during probe and remove

 - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC

 - bcm2835: Prevent lockups when terminating work

* tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: tmio: Fixup runtime PM management during remove
  mmc: tmio: Fixup runtime PM management during probe
  Revert "mmc: tmio: move runtime PM enablement to the driver implementations"
  Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
  Revert "mmc: bcm2835: Terminate timeout work synchronously"

Pull drm fixes from Dave Airlie:
 "From the maintainer summit, just some last minute fixes for final:

  lima:
   - fix gem_wait ioctl

  core:
   - constify modes list

  i915:
   - DP MST high color depth regression
   - GPU hangs on vulkan compute workloads"

* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
  drm/lima: fix lima_gem_wait() return value
  drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
  drm/i915: Limit MST to <= 8bpc once again
  drm/modes: Make the whitelist more const

Merge tag 'wireless-drivers-next-for-davem-2019-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 5.4

Last set of patches for 5.4. wil6210 and rtw88 being most active this
time, but ath9k also having a new module to load devices without
EEPROM.

Major changes:

wil6210

* add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11

* add debugfs file to show PCM ring content

* report boottime_ns in scan results

ath9k

* add a separate loader for AR92XX (and older) pci(e) without eeprom

brcmfmac

* use the same wiphy after PCIe reset to not confuse the user space

rtw88

* enable interrupt migration

* enable AMSDU in AMPDU aggregation

* report RX power for each antenna

* enable to DPK and IQK calibration methods to improve performance
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kvm-s390-master-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fixes for 5.3

- prevent a user triggerable oops in the migration code
- do not leak kernel stack content

James Harvey reported a livelock that was introduced by commit
d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when
removing a memslot"").

The livelock occurs because kvm_mmu_zap_all() as it exists today will
voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs
to add shadow pages.  With enough vCPUs, kvm_mmu_zap_all() can get stuck
in an infinite loop as it can never zap all pages before observing lock
contention or the need to reschedule.  The equivalent of kvm_mmu_zap_all()
that was in use at the time of the reverted commit (4e103134, "KVM:
x86/mmu: Zap only the relevant pages when removing a memslot") employed
a fast invalidate mechanism and was not susceptible to the above livelock.

There are three ways to fix the livelock:

- Reverting the revert (commit d012a06a) is not a viable option as
  the revert is needed to fix a regression that occurs when the guest has
  one or more assigned devices.  It's unlikely we'll root cause the device
  assignment regression soon enough to fix the regression timely.

- Remove the conditional reschedule from kvm_mmu_zap_all().  However, although
  removing the reschedule would be a smaller code change, it's less safe
  in the sense that the resulting kvm_mmu_zap_all() hasn't been used in
  the wild for flushing memslots since the fast invalidate mechanism was
  introduced by commit 6ca18b69 ("KVM: x86: use the fast way to
  invalidate all pages"), back in 2013.

- Reintroduce the fast invalidate mechanism and use it when zapping shadow
  pages in response to a memslot being deleted/moved, which is what this
  patch does.

For all intents and purposes, this is a revert of commit ea145aac
("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of
commit 7390de1e ("Revert "KVM: x86: use the fast way to invalidate
all pages""), i.e. restores the behavior of commit 5304b8d3 ("KVM:
MMU: fast invalidate all pages") and commit 6ca18b69 ("KVM: x86:
use the fast way to invalidate all pages") respectively.

Fixes: d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"")
Reported-by: James Harvey <jamespharvey20@gmail.com>
Cc: Alex Willamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Part of the intention during the definition of the RISC-V kernel image
header was to lay the groundwork for a future merge with the ARM64
image header.  One error during my original review was not noticing
that the RISC-V header's "magic" field was at a different size and
position than the ARM64's "magic" field.  If the existing ARM64 Image
header parsing code were to attempt to parse an existing RISC-V kernel
image header format, it would see a magic number 0.  This is
undesirable, since it's our intention to align as closely as possible
with the ARM64 header format.  Another problem was that the original
"res3" field was not being initialized correctly to zero.

Address these issues by creating a 32-bit "magic2" field in the RISC-V
header which matches the ARM64 "magic" field.  RISC-V binaries will
store "RSC\x05" in this field.  The intention is that the use of the
existing 64-bit "magic" field in the RISC-V header will be deprecated
over time.  Increment the minor version number of the file format to
indicate this change, and update the documentation accordingly.  Fix
the assembler directives in head.S to ensure that reserved fields are
properly zero-initialized.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reported-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Karsten Merker <merker@debian.org>
Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u
Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t