- 07 Aug, 2023 16 commits
-
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The DA7219 codec used here can detect Headphones, Headset Mic and Line Out connections. Expose each to userspace as kcontrols and add the necessary widgets. Signed-off-by:
Alper Nebi Yasak <alpernebiyasak@gmail.com> Link: https://lore.kernel.org/r/20230802175737.263412-17-alpernebiyasak@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose each to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver has correctly mapped jack kcontrols for Headphone and Headset Mic. However, it is configuring the jack to only care about Headphone events. The MAX98090 codec used here can detect both connections, so configure the jack as such. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. It seems to have a single detection GPIO pin used to report everything as a Headset. But it has widgets for Headphone and Mic Jack, so expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
Commit 2913bb1f ("ASoC: Intel: sof_da7219_max98373: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit b9f53b9f ("ASoC: Intel: kbl_da7219_max98927: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit c2065d43 ("ASoC: Intel: kbl_da7219_max98357a: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit ecd77d49 ("ASoC: Intel: bytcr_wm5102: Add jack detect support") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle jack detection events for these peripherals. The WM5102 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
Commit bbdd4ea2 ("ASoC: Intel: bxt_da7219_max98357a: remap jack pins") maps kcontrols for Headphone and Headset Mic jacks for this driver so that PulseAudio and PipeWire can handle detection events for these peripherals. The DA7219 codec used here can also distinguish between Headphone and Line Out connections that go into the same physical port. Expose the latter to userspace as a kcontrol as well and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The DA7219 codec used here can detect Headphones, Headset Mic and Line Out connections. Expose each to userspace as kcontrols and add the necessary widgets. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5682, RT1015 and RT1015p codecs used here can detect Headphone and Headset Mic connections. Expose the former two to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5682, RT5682s, NAU8825 and NAU8821 codecs used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols and add the necessary widgets. Split the jack and pin structs per-codec to accommodate for per-codec differences. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The RT5645 codec used here can detect Headphone and Headset Mic connections. Expose both to userspace as kcontrols. Signed-off-by:
-
Alper Nebi Yasak authored
This driver does not properly map jack pins to kcontrols that PulseAudio and PipeWire need to handle jack detection events. The DA7219 codec used here can detect Headphones, Headset Mic and Line Out connections. Expose each to userspace as kcontrols and add the necessary widgets. Signed-off-by:
-
- 04 Aug, 2023 4 commits
-
-
Yang Yingliang authored
The init/exit() of driver only calls platform_driver_register/unregister, it can be simpilfied with module_platform_driver. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230804085402.1328033-1-yangyingliang@huawei.comSigned-off-by:
-
Fabio Estevam authored
WM8960 has the following power supplies: - AVDD - DBVDD - DCVDD - SPKVDD1 - SPKVDD1 Add support for them. Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230803215506.142922-2-festevam@gmail.comSigned-off-by:
-
Fabio Estevam authored
WM8960 has the following power supplies: - AVDD - DBVDD - DCVDD - SPKVDD1 - SPKVDD1 Add them to bindings to improve the hardware description. Signed-off-by:
-
Trevor Wu authored
To prevent incorrect access between the host and DSP sides, we need to modify DRAM as a non-cache memory type. Additionally, we can retrieve the size of shared DMA from the device tree. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Reviewed-by:
Yaochun Hung <yc.hung@mediatek.com> Reviewed-by:
Kuan-Hsun Cheng <Allen-KH.Cheng@mediatek.com> Link: https://lore.kernel.org/r/20230803075028.32170-1-trevor.wu@mediatek.comSigned-off-by:
-
- 03 Aug, 2023 2 commits
-
-
Charles Keepax authored
The UID field in snd_soc_acpi_link_adr is not documented, add kernel doc for it. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The mutex mutex_request_dram has no user. Remove mutex_request_dram. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230803083908.9DxbPvOK@linutronix.deSigned-off-by:
-
- 02 Aug, 2023 3 commits
-
-
Chancel Liu authored
Use SET_SYSTEM_SLEEP_PM_OPS to simplify suspend and resume function. fsl_micfil_suspend() and fsl_micfil_resume() can be deleted. Signed-off-by:
Chancel Liu <chancel.liu@nxp.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20230802052117.1293029-4-chancel.liu@nxp.comSigned-off-by:
-
Chancel Liu authored
fsl_micfil_use_verid() can help to parse the version info in VERID and PARAM registers. Since the two registers are added only on i.MX93 platform, a member flag called use_verid is introduced to soc data structure which indicates acquiring MICFIL version. Signed-off-by:
-
Chancel Liu authored
MICFIL IP is upgraded on i.MX93 platform. These new registers and new bit definition are added to complete the register list. Signed-off-by:
-
- 01 Aug, 2023 2 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Lots of small cleanups coming from Bard Liao and Charles Keepax for SoundWire platforms, and minor additions for RVPs and Chromebooks.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: GCC11 provides an '-fanalyzer' static analysis option which does not provide too many false-positives. This patch cleans-up known problematic code paths to help enable this capability in CI. We've used this for about a month already.
-
- 31 Jul, 2023 13 commits
-
-
Curtis Malainey authored
The switch component was never completed and sat half empty for over 3 years. It was recently deleted. For modern components this would require not change in the kernel but since this was a legacy allocation from the enum days of IPC3 we should mark the respective enum as deprecated. The splitter component was never even got a source file in the firmware. Therefore also delete it since this is not needed. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230731213242.434594-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Trevor Wu authored
For MediaTek AFE, DAI DMA can support different bitwidths compared to the BE DAI. Therefore, it is preferable to obtain the BE frame format from the DAI_CONFIG. Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Pierre-Louis Bossart authored
use 'part_id' to follow MIPI/SoundWire wording and use more consistent %#x format. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
Move existing function in common library to make sure the code can be reused by other SoC vendors. No functionality change outside of the move and added prefix. Signed-off-by:
-
Pierre-Louis Bossart authored
Start removing Intel-specific arguments to make that function usable by other SOC vendors. Signed-off-by:
-
Charles Keepax authored
Hoist the handling logic for group_generated up to the sof_card_dai_links_create level. This avoids the need to pass the array through multiple levels of functions. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Charles Keepax authored
Rename get_sdw_dailink_info to simply get_dailink_info and have it also return the number of codecs present. Then hoist the allocation of the codec conf structure up into sof_card_dai_links_create. This saves an extra loop through the adr_link array, allows us to get rid of sof_card_codec_conf_alloc and makes the allocation more explicit. Reviewed-by:
-
Charles Keepax authored
The counting of each of the types of DAI link is a bit messy with things added onto an intermediate variable as it goes along. Re-order things a little to keep the order consistent with the rest of the function and simplify the process down to a variable for each type of DAI and then sum them at the end. Reviewed-by:
-
Chao Song authored
Add cs35l56 support in sof_sdw machine driver. Reviewed-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
-
Charles Keepax authored
Add support for MFD based CODEC drivers, by allowing the CODEC name to not be the SoundWire device directly. Signed-off-by:
-
Bard Liao authored
create_codec_dai_name() is used to create codec component's information in different adr links. We can and should break before we do anything. Signed-off-by:
-
Charles Keepax authored
The amp_num member of the info struct is zeroed at the start of sof_card_dai_links_create, but then summed in mc_probe after sof_card_dai_links_create is called. It is a little clearer to hoist the initialisation out of sof_card_dai_links_create so it is on the same level as the summation. Reviewed-by:
-
Charles Keepax authored
Pull the device and mach struct out of the card rather than explicitly passing to sof_card_dai_links_create. Reviewed-by:
-
