- 07 Jun, 2016 21 commits
-
-
Abylay Ospan authored
correct is CXD2841ER and CXD2854ER incorrect was CXD2441ER and CXD2454ER Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
Old behaviour: frontend0 - DVB-S/S2 frontend1 - DVB-T/T2 frontend2 - DVB-C frontend3 - ISDB-T New behaviour (DVBv5 API compliant): frontend0 - DVB-S/S2 frontend1 - DVB-T/T2/C/ISDB-T DTV standard should be selected by DTV_DELIVERY_SYSTEM call. And DVB-C default bandwidth now 8MHz Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
bandwidth 1.7,5,6,7,8Mhz support for DVB-T2 Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
Fixed HELENE tuner frequency calculation Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
now when new tuning parameters specified demod should retune. Also ISDB-T frequency offset calculation added (cxd2841er_get_carrier_offset_i). While here, fix re-tune for DVB-C Annex A, using the desired bandwidth, instead of using 8MHz. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
Fix offset calculation inside cxd2841er_get_carrier_offset_t Now DVB-T should be tuned correctly Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
Avoid error message: cxd2841er_read_status_s(): invalid state 1 Always force demod to shutdown state before initializing Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
Adding cxd2841er_get_carrier_offset_t to calculate DVB-T offset for Sony demodulators CXD2841ER and CXD2854ER Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
I'm second maintainer for netup_unidvb, cxd2841er, horus3a, ascot2e Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
mistakenly membase8_io used instead of membase8_config in this case we can't read/write CAM module memory (TUPLES) Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
New hardware revision of NetUP Universal DVB card (rev 1.4): * changed tuners (CXD2861ER and CXD2832AER) to CXD2858ER * changed demodulator (CXD2841ER) to CXD2854ER card now supports: DVB-S/S2, DVB-T/T2, DVB-C/C2, ISDB-T PCI id's assigned for new hardware revision is: 1b55:18f7 Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
* fix buffer length check * do not rely on ROLLOFF Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
CXD2854ER is identical to CXD2841ER except ISDB-T/S added. New method 'cxd2841er_attach_i' is added xtal frequency now configurable. Available options: 20.5MHz, 24MHz, 41MHz Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Abylay Ospan authored
This is Sony HELENE DVB-S/S2 DVB-T/T2 DVB-C/C2 ISDB-T/S tuner driver (CXD2858ER). Tuner is used on NetUP Dual Universal DVB CI card (hardware revision 1.4). Use 'helene_attach_s' to attach tuner in 'satellite mode'. Use 'helene_attach' for 'terrestrial mode'. Satellite delivery systems supported: DVB-S/S2, ISDB-S Terrestrial delivery systems supported: DVB-T/T2, ISDB-T Cable delivery systems supported: DVB-C/C2 Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Oliver Neukum authored
Allow for SS+ USB devices. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Nicolas Dufresne authored
The formula used to calculate bytesperline only works for packed format. So far, all planar format we support have their bytesperline equal to the image width (stride of the Y plane or a line of Y for M420). Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Andrew-CT Chen authored
Add a DT binding documentation of Video Processor Unit for the MT8173 SoC from Mediatek. Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
ayaka authored
User-space applications can use the VIDIOC_REQBUFS ioctl to determine if a memory mapped, user pointer or DMABUF based I/O is supported by the driver. So a set of VIDIOC_REQBUFS ioctl calls will be made with count 0 and then the real VIDIOC_REQBUFS call with count == n. But for count 0, the driver not only frees the buffer but also closes the MFC instance and s5p_mfc_ctx state is set to MFCINST_FREE. The VIDIOC_REQBUFS handler for the output device checks if the s5p_mfc_ctx state is set to MFCINST_INIT (which happens on an VIDIOC_S_FMT) and fails otherwise. So after a VIDIOC_REQBUFS(n), future VIDIOC_REQBUFS(n) calls will fails unless a VIDIOC_S_FMT ioctl calls happens before the reqbufs. But applications may first set the format and then attempt to determine the I/O methods supported by the driver (for example Gstramer does it) so the state won't be set to MFCINST_INIT again and VIDIOC_REQBUFS will fail. To avoid this issue, only free the buffers on VIDIOC_REQBUFS(0) but don't close the MFC instance to allow future VIDIOC_REQBUFS(n) calls to succeed. [javier: Rewrote changelog to explain the problem more detailed] Signed-off-by: ayaka <ayaka@soulik.info> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Nicolas Dufresne <nicolas@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Javier Martinez Canillas authored
Failing to get the struct s5p_mfc_pm .clock is a non-fatal error so the clock field can have a errno pointer value. But s5p_mfc_final_pm() only checks if .clock is not NULL before attempting to unprepare and put it. This leads to the following warning in clk_put() due s5p_mfc_final_pm(): WARNING: CPU: 3 PID: 1023 at drivers/clk/clk.c:2814 s5p_mfc_final_pm+0x48/0x74 [s5p_mfc] CPU: 3 PID: 1023 Comm: rmmod Tainted: G W 4.6.0-rc6-next-20160502-00005-g5a15a49106bc #9 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c010e1bc>] (unwind_backtrace) from [<c010af28>] (show_stack+0x10/0x14) [<c010af28>] (show_stack) from [<c032485c>] (dump_stack+0x88/0x9c) [<c032485c>] (dump_stack) from [<c011b8e8>] (__warn+0xe8/0x100) [<c011b8e8>] (__warn) from [<c011b9b0>] (warn_slowpath_null+0x20/0x28) [<c011b9b0>] (warn_slowpath_null) from [<bf16004c>] (s5p_mfc_final_pm+0x48/0x74 [s5p_mfc]) [<bf16004c>] (s5p_mfc_final_pm [s5p_mfc]) from [<bf157414>] (s5p_mfc_remove+0x8c/0x94 [s5p_mfc]) [<bf157414>] (s5p_mfc_remove [s5p_mfc]) from [<c03fe1f8>] (platform_drv_remove+0x24/0x3c) [<c03fe1f8>] (platform_drv_remove) from [<c03fcc70>] (__device_release_driver+0x84/0x110) [<c03fcc70>] (__device_release_driver) from [<c03fcdd8>] (driver_detach+0xac/0xb0) [<c03fcdd8>] (driver_detach) from [<c03fbff8>] (bus_remove_driver+0x4c/0xa0) [<c03fbff8>] (bus_remove_driver) from [<c01886a8>] (SyS_delete_module+0x174/0x1b8) [<c01886a8>] (SyS_delete_module) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c) Assign the pointer to NULL in case of a lookup failure to fix the issue. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Marek Szyprowski authored
This patch fixes build break caused by lack of dma-iommu API on ARM64 (this API is specific to ARM 32bit architecture). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
-
git://linuxtv.org/snawrocki/samsungMauro Carvalho Chehab authored
* 'for-v4.8/media/exynos-mfc' of git://linuxtv.org/snawrocki/samsung: media: s5p-mfc: add iommu support media: s5p-mfc: replace custom reserved memory handling code with generic one media: s5p-mfc: use generic reserved memory bindings of: reserved_mem: add support for using more than one region for given device media: set proper max seg size for devices on Exynos SoCs media: vb2-dma-contig: add helper for setting dma max seg size s5p-mfc: Fix race between s5p_mfc_probe() and s5p_mfc_open() s5p-mfc: Add release callback for memory region devs s5p-mfc: Set device name for reserved memory region devs
-
- 03 Jun, 2016 9 commits
-
-
Marek Szyprowski authored
This patch adds support for IOMMU to s5p-mfc device driver. MFC firmware is limited and it cannot use the default configuration. If IOMMU is available, the patch disables the default DMA address space configuration and creates a new address space of size limited to 256M and base address set to 0x20000000. For now the same address space is shared by both 'left' and 'right' memory channels, because the DMA/IOMMU frameworks do not support configuring them separately. This is not optimal, but besides limiting total address space available has no other drawbacks (MFC firmware supports 256M of address space per each channel). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Marek Szyprowski authored
This patch removes custom code for initialization and handling of reserved memory regions in s5p-mfc driver and replaces it with generic reserved memory regions api. s5p-mfc driver now handles two reserved memory regions defined by generic reserved memory bindings. Support for non-dt platform has been removed, because all supported platforms have been already converted to device tree. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Marek Szyprowski authored
Use generic reserved memory bindings and mark old, custom properties as obsoleted. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Marek Szyprowski authored
This patch allows device drivers to initialize more than one reserved memory region assigned to given device. When driver needs to use more than one reserved memory region, it should allocate child devices and initialize regions by index for each of its child devices. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Marek Szyprowski authored
All multimedia devices found on Exynos SoCs support only contiguous buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory allocator to correctly create contiguous memory mappings. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Marek Szyprowski authored
Add a helper function for device drivers to set DMA's max_seg_size. Setting it to largest possible value lets DMA-mapping API always create contiguous mappings in DMA address space. This is essential for all devices, which use dma-contig videobuf2 memory allocator and shared buffers. Till now, the only case when vb2-dma-contig really 'worked' was a case where userspace provided USERPTR buffer, which was in fact mmaped contiguous buffer from the other v4l2/drm device. Also DMABUF made of contiguous buffer worked only when its exporter did not split it into several chunks in the scatter-list. Any other buffer failed, regardless of the arch/platform used and the presence of the IOMMU of the device bus. This patch provides interface to fix this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Javier Martinez Canillas authored
The s5p_mfc_probe() function registers the video devices before all the resources needed by s5p_mfc_open() are correctly initalized. So if s5p_mfc_open() function is called before s5p_mfc_probe() finishes (since the video dev is already registered), a NULL pointer dereference will happen due s5p_mfc_open() accessing uninitialized vars such as the struct s5p_mfc_dev .watchdog_timer and .mfc_ops fields. An example is following BUG caused by add_timer() getting a NULL pointer: [ 45.765374] kernel BUG at kernel/time/timer.c:790! [ 45.765381] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... [ 45.766149] [<c016fdf4>] (mod_timer) from [<bf181d18>] (s5p_mfc_open+0x274/0x4d4 [s5p_mfc]) [ 45.766416] [<bf181d18>] (s5p_mfc_open [s5p_mfc]) from [<bf0214a0>] (v4l2_open+0x9c/0x100 [videodev]) [ 45.766547] [<bf0214a0>] (v4l2_open [videodev]) from [<c01e355c>] (chrdev_open+0x9c/0x178) [ 45.766575] [<c01e355c>] (chrdev_open) from [<c01dceb4>] (do_dentry_open+0x1e0/0x300) [ 45.766595] [<c01dceb4>] (do_dentry_open) from [<c01ec2f0>] (path_openat+0x800/0x10d4) [ 45.766610] [<c01ec2f0>] (path_openat) from [<c01ed8b8>] (do_filp_open+0x5c/0xc0) [ 45.766624] [<c01ed8b8>] (do_filp_open) from [<c01de218>] (do_sys_open+0x10c/0x1bc) [ 45.766642] [<c01de218>] (do_sys_open) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c) [ 45.766655] Code: eaffffe3 e3a00001 e28dd008 e8bd81f0 (e7f001f2) Fix it by registering the video devs as the last step in s5p_mfc_probe(). Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Javier Martinez Canillas authored
When s5p_mfc_remove() calls put_device() for the reserved memory region devs, the driver core warns that the dev doesn't have a release callback: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Also, the declared DMA memory using dma_declare_coherent_memory() isn't relased so add a dev .release that calls dma_release_declared_memory(). Cc: <stable@vger.kernel.org> Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
Javier Martinez Canillas authored
The devices don't have a name set, so makes dev_name() returns NULL which makes harder to identify the devices that are causing issues, for example: WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90 Device '(null)' does not have a release() function, it is broken and must be fixed. And after setting the device name: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Cc: <stable@vger.kernel.org> Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
-
- 30 May, 2016 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 4.7-rc1 * tag 'v4.7-rc1': (10534 commits) Linux 4.7-rc1 hash_string: Fix zero-length case for !DCACHE_WORD_ACCESS Rename other copy of hash_string to hashlen_string hpfs: implement the show_options method affs: fix remount failure when there are no options changed hpfs: fix remount failure when there are no options changed fs: fix binfmt_aout.c build error h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> Revert "platform/chrome: chromeos_laptop: Add Leon Touch" i2c: dev: use after free in detach MIPS: Add missing FROZEN hotplug notifier transitions ...
-
- 29 May, 2016 3 commits
-
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 May, 2016 6 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
-
Guenter Roeck authored
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.sciencehorizons.net/linuxLinus Torvalds authored
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac8 ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h>
-