- 22 Feb, 2018 40 commits
-
-
Gang He authored
commit ff26cc10 upstream. If we can't get inode lock immediately in the function ocfs2_inode_lock_with_page() when reading a page, we should not return directly here, since this will lead to a softlockup problem when the kernel is configured with CONFIG_PREEMPT is not set. The method is to get a blocking lock and immediately unlock before returning, this can avoid CPU resource waste due to lots of retries, and benefits fairness in getting lock among multiple nodes, increase efficiency in case modifying the same file frequently from multiple nodes. The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1) looks like: Kernel panic - not syncing: softlockup: hung tasks CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <IRQ> dump_stack+0x5c/0x82 panic+0xd5/0x21e watchdog_timer_fn+0x208/0x210 __hrtimer_run_queues+0xcc/0x200 hrtimer_interrupt+0xa6/0x1f0 smp_apic_timer_interrupt+0x34/0x50 apic_timer_interrupt+0x96/0xa0 </IRQ> RIP: 0010:unlock_page+0x17/0x30 RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004 RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00 R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518 R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300 ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2] ocfs2_readpage+0x41/0x2d0 [ocfs2] filemap_fault+0x12b/0x5c0 ocfs2_fault+0x29/0xb0 [ocfs2] __do_fault+0x1a/0xa0 __handle_mm_fault+0xbe8/0x1090 handle_mm_fault+0xaa/0x1f0 __do_page_fault+0x235/0x4b0 trace_do_page_fault+0x3c/0x110 async_page_fault+0x28/0x30 RIP: 0033:0x7fa75ded638e RSP: 002b:00007ffd6657db18 EFLAGS: 00010287 RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700 RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700 RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000 R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770 R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000 About performance improvement, we can see the testing time is reduced, and CPU utilization decreases, the detailed data is as follows. I ran multi_mmap test case in ocfs2-test package in a three nodes cluster. Before applying this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2754 ocfs2te+ 20 0 170248 6980 4856 D 80.73 0.341 0:18.71 multi_mmap 1505 root rt 0 222236 123060 97224 S 2.658 6.015 0:01.44 corosync 5 root 20 0 0 0 0 S 1.329 0.000 0:00.19 kworker/u8:0 95 root 20 0 0 0 0 S 1.329 0.000 0:00.25 kworker/u8:1 2728 root 20 0 0 0 0 S 0.997 0.000 0:00.24 jbd2/sda1-33 2721 root 20 0 0 0 0 S 0.664 0.000 0:00.07 ocfs2dc-3C8CFD4 2750 ocfs2te+ 20 0 142976 4652 3532 S 0.664 0.227 0:00.28 mpirun ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 14:44:52 CST 2017 multi_mmap..................................................Passed. Runtime 783 seconds. After apply this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2508 ocfs2te+ 20 0 170248 6804 4680 R 54.00 0.333 0:55.37 multi_mmap 155 root 20 0 0 0 0 S 2.667 0.000 0:01.20 kworker/u8:3 95 root 20 0 0 0 0 S 2.000 0.000 0:01.58 kworker/u8:1 2504 ocfs2te+ 20 0 142976 4604 3480 R 1.667 0.225 0:01.65 mpirun 5 root 20 0 0 0 0 S 1.000 0.000 0:01.36 kworker/u8:0 2482 root 20 0 0 0 0 S 1.000 0.000 0:00.86 jbd2/sda1-33 299 root 0 -20 0 0 0 S 0.333 0.000 0:00.13 kworker/2:1H 335 root 0 -20 0 0 0 S 0.333 0.000 0:00.17 kworker/1:1H 535 root 20 0 12140 7268 1456 S 0.333 0.355 0:00.34 haveged 1282 root rt 0 222284 123108 97224 S 0.333 6.017 0:01.33 corosync ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 15:04:12 CST 2017 multi_mmap..................................................Passed. Runtime 487 seconds. Link: http://lkml.kernel.org/r/1514447305-30814-1-git-send-email-ghe@suse.com Fixes: 1cce4df0 ("ocfs2: do not lock/unlock() inode DLM lock") Signed-off-by:
Gang He <ghe@suse.com> Reviewed-by:
Eric Ren <zren@suse.com> Acked-by:
alex chen <alex.chen@huawei.com> Acked-by:
piaojun <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjorn Andersson authored
commit d1bf2d30 upstream. Propagate the error of devfreq_add_device() in devm_devfreq_add_device() rather than statically returning ENOMEM. This makes it slightly faster to pinpoint the cause of a returned error. Fixes: 8cd84092 ("PM / devfreq: Add resource-managed function for devfreq device") Cc: stable@vger.kernel.org Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Shilpasri G Bhat authored
commit 3fa4680b upstream. Some OpenPOWER boxes can have same pstate values for nominal and pmin pstates. In these boxes the current code will not initialize 'powernv_pstate_info.min' variable and result in erroneous CPU frequency reporting. This patch fixes this problem. Fixes: 09ca4c9b (cpufreq: powernv: Replacing pstate_id with frequency table index) Reported-by:
Alvin Wang <wangat@tw.ibm.com> Signed-off-by:
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.8+ <stable@vger.kernel.org> # 4.8+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit 6f301e06 upstream. The following sequence: * Change queue pair state into IB_QPS_ERR. * Post a work request on the queue pair. Triggers the following race condition in the rdma_rxe driver: * rxe_qp_error() triggers an asynchronous call of rxe_completer(), the function that examines the QP send queue. * rxe_post_send() posts a work request on the QP send queue. If rxe_completer() runs prior to rxe_post_send(), it will drain the send queue and the driver will assume no further action is necessary. However, once we post the send to the send queue, because the queue is in error, no send completion will ever happen and the send will get stuck. In order to process the send, we need to make sure that rxe_completer() gets run after a send is posted to a queue pair in an error state. This patch ensures that happens. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Moni Shoua <monis@mellanox.com> Cc: <stable@vger.kernel.org> # v4.8 Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit 4c1baad2 upstream. Running the compaction_test sometimes results in out-of-memory failures. When I debugged this, it turned out that the code to reset the number of hugepages to the initial value is simply broken since we write into an open sysctl file descriptor multiple times without seeking back to the start. Adding the lseek here fixes the problem. Cc: stable@vger.kernel.org Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://bugs.linaro.org/show_bug.cgi?id=3145Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Jack Morgenstein authored
commit 852f6927 upstream. Allocating steerable UD QPs depends on having at least one IB port, while releasing those QPs does not. As a result, when there are only ETH ports, the IB (RoCE) driver requests releasing a qp range whose base qp is zero, with qp count zero. When SR-IOV is enabled, and the VF driver is running on a VM over a hypervisor which treats such qp release calls as errors (rather than NOPs), we see lines in the VM message log like: mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0 Fix this by adding a check for a zero count in mlx4_release_qp_range() (which thus treats releasing 0 qps as a nop), and eliminating the check for device managed flow steering when releasing steerable UD QPs. (Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it remains NULL when steerable UD QPs are not allocated). Fixes: 4196670b ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 87b3524c upstream. This failure exists with qib: ver_rc_compare_swap: mismatch, sequence 2, expected 123456789abcdef, got 0 The request builder was using the incorrect inlines to build the request header resulting in incorrect data in the atomic header. Fix by using the appropriate inlines to create the request. Fixes: 261a4351 ("IB/qib,IB/hfi: Use core common header file") Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Nicholas Piggin authored
This is just the first chunk of commit 222f20f1 upstream. to fix a build error in the powerpc tree due to other backports happening (and this full patch not being backported). Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Yves-Alexis Perez <corsac@debian.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Yves-Alexis Perez <corsac@debian.org> Signed-off-by:
-
NeilBrown authored
commit 8dd601fa upstream. dec_pending() is given an error status (possibly 0) to be recorded against a bio. It can be called several times on the one 'struct dm_io', and it is careful to only assign a non-zero error to io->status. However when it then assigned io->status to bio->bi_status, it is not careful and could overwrite a genuine error status with 0. This can happen when chained bios are in use. If a bio is chained beneath the bio that this dm_io is handling, the child bio might complete and set bio->bi_status before the dm_io completes. This has been possible since chained bios were introduced in 3.14, and has become a lot easier to trigger with commit 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") as that commit caused dm to start using chained bios itself. A particular failure mode is that if a bio spans an 'error' target and a working target, the 'error' fragment will complete instantly and set the ->bi_status, and the other fragment will normally complete a little later, and will clear ->bi_status. The fix is simply to only assign io_error to bio->bi_status when io_error is not zero. Reported-and-tested-by:
Milan Broz <gmazyland@gmail.com> Cc: stable@vger.kernel.org (v3.14+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
James Hogan authored
commit ec897569 upstream. Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is conditional upon USB && USB_SUPPORT, so that it can be freely selected by platform Kconfig symbols in architecture code. For example once the MIPS_GENERIC platform selects are fixed in commit 2e6522c5 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS 32r6_defconfig warns like so: warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB) Fixes: 2e6522c5 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN") Signed-off-by:
James Hogan <jhogan@kernel.org> Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-usb@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by:
-
Mikulas Patocka authored
commit 7ac8ff95 upstream. IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken multicast address filter in the mvpp2 driver. The driver loads doesn't load any multicast entries if "allmulti" is not set. This condition should be reversed. The condition !netdev_mc_empty(dev) is useless (because netdev_for_each_mc_addr is nop if the list is empty). This patch also fixes a possible overflow of the multicast list - if mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Takashi Iwai authored
commit d15d662e upstream. ALSA sequencer core initializes the event pool on demand by invoking snd_seq_pool_init() when the first write happens and the pool is empty. Meanwhile user can reset the pool size manually via ioctl concurrently, and this may lead to UAF or out-of-bound accesses since the function tries to vmalloc / vfree the buffer. A simple fix is to just wrap the snd_seq_pool_init() call with the recently introduced client->ioctl_mutex; as the calls for snd_seq_pool_init() from other side are always protected with this mutex, we can avoid the race. Reported-by:
范龙飞 <long7573@126.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lassi Ylikojola authored
commit 5e35dc03 upstream. Add quirk to ensure a sync endpoint is properly configured. This patch is a fix for same symptoms on Behringer UFX1204 as patch from Albertto Aquirre on Dec 8 2016 for Axe-Fx II. Signed-off-by:
Lassi Ylikojola <lassi.ylikojola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan-Marek Glogowski authored
commit fdcc968a upstream. These laptops have a combined jack to attach headsets, the U727 on the left, the U757 on the right, but a headsets microphone doesn't work. Using hdajacksensetest I found that pin 0x19 changed the present state when plugging the headset, in addition to 0x21, but didn't have the correct configuration (shown as "Not connected"). So this sets the configuration to the same values as the headphone pin 0x21 except for the device type microphone, which makes it work correctly. With the patch the configured pins for U727 are Pin 0x12 (Internal Mic, Mobile-In): present = No Pin 0x14 (Internal Speaker): present = No Pin 0x19 (Black Mic, Left side): present = No Pin 0x1d (Internal Aux): present = No Pin 0x21 (Black Headphone, Left side): present = No Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kailang Yang authored
commit 61fcf8ec upstream. Thinkpad Dock device support for ALC298 platform. It need to use SSID for the quirk table. Because IdeaPad also has ALC298 platform. Use verb for the quirk table will confuse. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kirill Marinushkin authored
commit 447cae58 upstream. The layout of the UAC2 Control request and response varies depending on the request type. With the current implementation, only the Layout 2 Parameter Block (with the 2-byte sized RANGE attribute) is handled properly. For the Control requests with the 1-byte sized RANGE attribute (Bass Control, Mid Control, Tremble Control), the response is parsed incorrectly. This commit: * fixes the wLength field value in the request * fixes parsing the range values from the response Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by:
Kirill Marinushkin <k.marinushkin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
commit 3f2f7c55 upstream. One of them has the codec of alc256 and the other one has the codec of alc289. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Stefan Agner authored
commit ea56fb28 upstream. With commit 3cf32d18 ("mtd: nand: vf610: switch to mtd_ooblayout_ops") the driver started to use the NAND cores default large page ooblayout. However, shortly after commit 6a623e07 ("mtd: nand: add ooblayout for old hamming layout") changed the default layout to the old hamming layout, which is not what vf610_nfc is using. Specify the default large page layout explicitly. Fixes: 6a623e07 ("mtd: nand: add ooblayout for old hamming layout") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Greg Kurz authored
commit 26d99834 upstream. When a 9p request is successfully flushed, the server is expected to just mark it as used without sending a 9p reply (ie, without writing data into the buffer). In this case, virtqueue_get_buf() will return len == 0 and we must not report a REQ_STATUS_RCVD status to the client, otherwise the client will erroneously assume the request has not been flushed. Cc: stable@vger.kernel.org Signed-off-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Liu Bo authored
commit 900c9981 upstream. The highest objectid, which is assigned to new inode, is decided at the time of initializing fs roots. However, in cases where log replay gets processed, the btree which fs root owns might be changed, so we have to search it again for the highest objectid, otherwise creating new inode would end up with -EEXIST. cc: <stable@vger.kernel.org> v4.4-rc6+ Fixes: f32e48e9 ("Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots") Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Liu Bo authored
commit e8f1bc14 upstream. This regression is introduced in commit 3d48d981 ("btrfs: Handle uninitialised inode eviction"). There are two problems, a) it is ->destroy_inode() that does the final free on inode, not ->evict_inode(), b) clear_inode() must be called before ->evict_inode() returns. This could end up hitting BUG_ON(inode->i_state != (I_FREEING | I_CLEAR)); in evict() because I_CLEAR is set in clear_inode(). Fixes: commit 3d48d981 ("btrfs: Handle uninitialised inode eviction") Cc: <stable@vger.kernel.org> # v4.7-rc6+ Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Liu Bo authored
commit 55237a5f upstream. It's possible that btrfs_sync_log() bails out after one of the two btrfs_write_marked_extents() which convert extent state's state bit into EXTENT_NEED_WAIT from EXTENT_DIRTY/EXTENT_NEW, however only EXTENT_DIRTY and EXTENT_NEW are searched by free_log_tree() so that those extent states with EXTENT_NEED_WAIT lead to memory leak. cc: <stable@vger.kernel.org> Signed-off-by:
-
Liu Bo authored
commit 1846430c upstream. In cases that the whole fs flips into readonly status due to failures in critical sections, then log tree's blocks are still dirty, and this leads to a crash during umount time, the crash is about use-after-free, umount -> close_ctree -> stop workers -> iput(btree_inode) -> iput_final -> write_inode_now -> ... -> queue job on stop'd workers cc: <stable@vger.kernel.org> v3.12+ Fixes: 681ae509 ("Btrfs: cleanup reserved space when freeing tree log on error") Signed-off-by:
-
Liu Bo authored
commit e8916699 upstream. @cur_offset is not set back to what it should be (@cow_start) if btrfs_next_leaf() returns something wrong, and the range [cow_start, cur_offset) remains locked forever. cc: <stable@vger.kernel.org> Signed-off-by:
-
David Disseldorp authored
commit ce512d79 upstream. If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then crypto_free_shash() is called with a NULL pointer which gets dereferenced in crypto_shash_tfm(). Fixes: 69110e3c ("iscsi-target: Use shash and ahash") Suggested-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
David Disseldorp <ddiss@suse.de> Cc: stable@vger.kernel.org # 4.6+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Larry Finger authored
commit c713fb07 upstream. There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih@realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b163 ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable@vger.kernel.org> # 4.14+ Fix-suggested-by:
Pkshih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by: James Cameron <quozl@laptop.org> # x86_64 OLPC NL3 Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Nicolas Pitre authored
commit 724ba8b3 upstream. When this method is set, the caller expects struct console_font fields to be properly initialized when it returns. Leave it unset otherwise nonsensical (leaked kernel stack) values are returned to user space. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Johan Hovold authored
commit 9cb18db0 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent display node was also prematurely freed. Note that the display and timings node references are never put after a successful dt-initialisation so the nodes would leak on later probe deferrals and on driver unbind. Fixes: b985172b ("video: atmel_lcdfb: add device tree suport") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit eac56aa3 upstream. Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable <stable@vger.kernel.org> # 3.18 Acked-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Corentin Labbe authored
commit 2e6522c5 upstream. MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does not exist. Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig name. Note that BMIPS_GENERIC does the same which confirms that this patch is needed. Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
-
Jan H. Schönherr authored
commit 10a0cd6e upstream. The functions devm_memremap_pages() and devm_memremap_pages_release() use different ways to calculate the section-aligned amount of memory. The latter function may use an incorrect size if the memory region is small but straddles a section border. Use the same code for both. Cc: <stable@vger.kernel.org> Fixes: 5f29a77c ("mm: fix mixed zone detection in devm_memremap_pages") Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit af27d940 upstream. We get a warning about some slow configurations in randconfig kernels: mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp] The warning is reasonable by itself, but gets in the way of randconfig build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set. The warning was added in 2013 in commit 75980e97 ("mm: fold page->_last_nid into page->flags where possible"). Cc: stable@vger.kernel.org Signed-off-by:
-
Ernesto A. Fernández authored
commit 9f037248 upstream. The grpid option is currently described as being the same as nogrpid. Signed-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Zhouyi Zhou authored
commit 06f29cc8 upstream. In the function __ext4_grp_locked_error(), __save_error_info() is called to save error info in super block block, but does not sync that information to disk to info the subsequence fsck after reboot. This patch writes the error information to disk. After this patch, I think there is no obvious EXT4 error handle branches which leads to "Remounting filesystem read-only" will leave the disk partition miss the subsequence fsck. Signed-off-by:
Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by:
-
Harshad Shirwadkar authored
commit abbc3f93 upstream. This patch fixes a race between the shutdown path and bio completion handling. In the ext4 direct io path with async io, after submitting a bio to the block layer, if journal starting fails, ext4_direct_IO_write() would bail out pretending that the IO failed. The caller would have had no way of knowing whether or not the IO was successfully submitted. So instead, we return -EIOCBQUEUED in this case. Now, the caller knows that the IO was submitted. The bio completion handler takes care of the error. Tested: Ran the shutdown xfstest test 461 in loop for over 2 hours across 4 machines resulting in over 400 runs. Verified that the race didn't occur. Usually the race was seen in about 20-30 iterations. Signed-off-by:
Harshad Shirwadkar <harshads@google.com> Signed-off-by:
-
Tobin C. Harding authored
commit f69120ce upstream. Sphinx emits various (26) warnings when building make target 'htmldocs'. Currently struct definitions contain duplicate documentation, some as kernel-docs and some as standard c89 comments. We can reduce duplication while cleaning up the kernel docs. Move all kernel-docs to right above each struct member. Use the set of all existing comments (kernel-doc and c89). Add documentation for missing struct members and function arguments. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
Alexander Potapenko authored
commit 3876bbe2 upstream. KMSAN reported use of uninitialized |entry->e_referenced| in a condition in mb_cache_shrink(): ================================================================== BUG: KMSAN: use of uninitialized memory in mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 CPU: 2 PID: 816 Comm: kswapd1 Not tainted 4.11.0-rc5+ #2877 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 mb_cache_scan+0x67/0x80 fs/mbcache.c:321 do_shrink_slab mm/vmscan.c:397 [inline] shrink_slab+0xc3d/0x12d0 mm/vmscan.c:500 shrink_node+0x208f/0x2fd0 mm/vmscan.c:2603 kswapd_shrink_node mm/vmscan.c:3172 [inline] balance_pgdat mm/vmscan.c:3289 [inline] kswapd+0x160f/0x2850 mm/vmscan.c:3478 kthread+0x46c/0x5f0 kernel/kthread.c:230 ret_from_fork+0x29/0x40 arch/x86/entry/entry_64.S:430 chained origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_save_stack mm/kmsan/kmsan.c:317 [inline] kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547 __msan_store_shadow_origin_1+0xac/0x110 mm/kmsan/kmsan_instr.c:257 mb_cache_entry_create+0x3b3/0xc60 fs/mbcache.c:95 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337 kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766 mb_cache_entry_create+0x283/0xc60 fs/mbcache.c:86 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 ================================================================== Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org # v4.6 Signed-off-by:
-
Stewart Smith authored
commit 5b8b5806 upstream. According to the OPAL docs: skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and this indicates either a transient or permanent error. Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a permanent error particularly well, in that you could end up in a busy loop. This was not too hard to trigger on an AMI BMC based OpenPOWER machine doing a continuous "ipmitool mc reset cold" to the BMC, the result of that being that we'd get stuck in an infinite loop in opal_get_rtc_time(). We now retry a few times before returning the error higher up the stack. Fixes: 16b1d26e ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Julia Lawall authored
commit 3a61b527 upstream. Check the variable that was most recently initialized. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x, y, f, g, e, m; statement S1,S2,S3,S4; @@ x = f(...); if (\(<+...x...+>\&e\)) S1 else S2 ( x = g(...); | m = g(...,&x,...); | y = g(...); *if (e) S3 else S4 ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 239b5f64 upstream. Fixes stability issues. v2: clamp sclk to 600 Mhz Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370Acked-by:
-
