- 11 Sep, 2014 15 commits
-
-
Vladimir Kondratiev authored
added misc printouts in some init/uninit functions for better traceability Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
New module (wil_platform) for handling platform specific tasks Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
- parentheses, indentation, typos - seq_puts() instead of seq_printf() with single argument - sizeof(var) vs. sizeof(type) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
Log worker thread start/stop; as well as every handler invocation Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
when connecting, print some info about BSS Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vladimir Kondratiev authored
Firmware download implemented but is still experimental feature; flag controlling it added, no_fw_load. It is true by default, use no_fw_load=N to activate feature. Reset flows also got some adjustment for the fw download to work Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
I misunderstood original Broadcom comment and used wrong values. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
The 0-DAY kernel build testing backend reports the following warning: drivers/net/wireless/rtlwifi/btcoexist/halbtcoutsrc.c:516 halbtc_bitmask_write_1byte() warn: always true condition '(bit_mask != 4294967295) => (0-255 != u32max)' This problem was introduced in commit ed364abf, and arises because the caller of halbtc_bitmask_write_1byte() is using a u8 rather than a u32 for the data. Reported-by: Kbuild test robot <kbuild-all@01.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Kbuild test robot <kbuild-all@01.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Also use b43_radio_wait_value to simplify the code and usleep_range when needed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Radio should be prepared only before initialization. We need this to be able to call b43_radio_2059_init conditionally (in the future). This also documents RF control register a bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hans Wennborg authored
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hans Wennborg authored
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 09 Sep, 2014 25 commits
-
-
Hauke Mehrtens authored
This core is used on BCM4708 to configure the PCIe and USB3 PHYs and it contains the addresses to the Device Management unit. This will be used by the PCIe driver first. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
Each core could have more than one alternative address. There are cores with 8 alternative addresses for different functions. The PHY control in the Chip common B core is done through the 2. alternative address and not the first one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> CC: linux-usb@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Scanning is curently broken when two channel contexts are active. For example in a P2P-GO/STA setup, the offchannel timer allows HZ / 10 to elapse before initiating a switch to the next scan channel from the current operating channel, which in this case would be the P2P-GO context. But, the channel context timer might decide to switch to the STA context when an SWBA comes early and a beacon is sent out. Since pending offchannel requests are processed in EVENT_BEACON_PREPARE, this causes inconsistent scanning. Fix this by making sure that a context switch happens before processing the pending offchannel request. This also makes sure that active channel contexts will always have higher priority than offchannel operations and the scan sequence looks like this: p2p-go, sta, p2p-go, offchannel, p2p-go, sta, p2p-go, offchannel,..... The oper-channel is p2p-go, so the STA context has to switch to p2p-go again before switching offchannel. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
When multiple channel contexts are active, an offchannel request will not be handled immediately, but will be queued to be handled later. But, currently, the channel definition is not copied to the local offchannel state. This breaks operation like scanning when MCC is active. Fix this by storing the offchannel parameters properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Reduces code duplication. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Currently, the interface count is maintained globally, but this causes problems in RX filter calculation. Make the interface count a per-channel-context variable to fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Maintain the RX filter on a per-channel-context basis and not globally. Not doing so was resulting in incorrect filter calculation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
ATH9K_RX_FILTER_COMP_BAR is used to receive BAR completion frames and is set if the current channel is HT. When channel contexts are enabled, instead of using the mac80211 helpers, check if the current channel definition is HT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Since ath_startrecv() doesn't return an error value, cleanup the callsites. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
If multiple channel contexts are active, then the opmode can be different in each context. Since the RX filter is calculated in ath_startrecv() before switching to the new opmode, the wrong filters are chosen. Fix this by calling ath9k_calculate_summary_state() before the RX module is started. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Since CTWindow can be used for improving discoverability, fill this field in the NoA Attribute properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Currently, different units are used for handling sc->offchannel.duration. In scan mode, it contains jiffies and in RoC mode, milliseconds is used. This causes confusion since in ath_chanctx_switch(), TU_TO_USEC is used to determine the offchannel duration, resulting in incorrect values. Fix this by using jiffies in both modes. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
The start time field in the NoA attribute needs to be updated based on the TSF timer when an absence notification is sent by the P2P GO. When two channel contexts are active, continuous, cyclic NoA is announced by setting the count value to 255, but the start time is updated only once, for one beacon and the same value is sent in all subsequent beacons, even though the timestamp keeps moving. Fix this by removing the check for 'periodic_noa_duration' and assign the interface's start_time/duration values directly when there is more than one active context. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
If a station interface is already assigned to a context and is active and a second interface of type AP is added, then beaconing on the new interface has to be begin only after the BSS_CHANGED_BEACON_ENABLED flag is sent by mac80211 to the driver. But, since we issue ATH_CHANCTX_EVENT_ENABLE_MULTICHANNEL as soon as a new channel context is added, a switch occurs almost immediately before BSS_CHANGED_BEACON_ENABLED is received. When a HW reset is done for the new context, beacons are enabled for the interface since "enable_beacon" in the BSS config maintained in mac80211 is true - but the driver hasn't been notified yet. This causes a panic, since the beacon interval is zero for this interface and ath9k_cmn_beacon_config_ap() doesn't have a safety check. Fix this panic by checking if the beacon params has been cached for this context and use the "enable_beacon" flag maintained locally in the driver. Also, recalculate the summary data after the beacon params have been cached when BSS_CHANGED_BEACON_ENABLED is received. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
If the current opmode is managed, the ATH_OP_BEACONS flag needs to be set only when there is a primary station interface and it is associated/active. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
In channel context mode, when a new context is added, mac80211 issues a bss_info_changed() notfication when preparing the connection for the new interface/context. But, this is done prior to the mgd_prepare_tx() call which is where we switch to the new context. Since the current context will be different when the earlier bss_info_changed() is handled, the beacon information for the VIF is not updated, but discarded since the rules for the current context disallows it. In the subsequent association process for the new context/vif, this becomes a problem because the beacon parameters are invalid. This causes problems with the TSF timer, causing large jumps. To fix this, check if the beacon info is being updated for a different context and if so, allow it without any checks since we limit the max. interfaces to two anyway. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
On Northstar (ARM arch) we will use MTD subsystem to access NVRAM and SPROM. To get access to flash device we need to register these cores first. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
This cleans code a bit and will us to register cores in other places as well. The only difference with this patch is using "core_index" for setting device name. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This patch makes halbtcoutsrc.{c,h} work with the new pieces of the driver. Also included are some modifications to various header files. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This code comes from the V062414 version of the drivers from Realtek. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This patch adds the code needed for the new rtl8821ae driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This patch adds the routines found in the V062814 Realtek version. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This patch adds the routines needed to support BT coexistence with the new rtl8192ee driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
This patch is the first of a set to bring this driver up to the latest Realtek code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: troy_tan@realsil.com.cn Signed-off-by: John W. Linville <linville@tuxdriver.com>
-