- 04 May, 2022 1 commit
-
-
Dave Chinner authored
-
- 26 Apr, 2022 3 commits
-
-
Eric Sandeen authored
This reverts commit 4b8628d5. XFS quota has had the concept of a "quota warning limit" since the earliest Irix implementation, but a mechanism for incrementing the warning counter was never implemented, as documented in the xfs_quota(8) man page. We do know from the historical archive that it was never incremented at runtime during quota reservation operations. With this commit, the warning counter quickly increments for every allocation attempt after the user has crossed a quote soft limit threshold, and this in turn transitions the user to hard quota failures, rendering soft quota thresholds and timers useless. This was reported as a regression by users. Because the intended behavior of this warning counter has never been understood or documented, and the result of this change is a regression in soft quota functionality, revert this commit to make soft quota limits and timers operable again. Fixes: 4b8628d5 ("xfs: actually bump warning counts when we send warnings) Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Darrick J. Wong <djwong@kernel.org> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Brian Foster authored
The filestream AG selection loop uses pagf data to aid in AG selection, which depends on pagf initialization. If the in-core structure is not initialized, the caller invokes the AGF read path to do so and carries on. If another task enters the loop and finds a pagf init already in progress, the AGF read returns -EAGAIN and the task continues the loop. This does not increment the current ag index, however, which means the task spins on the current AGF buffer until unlocked. If the AGF read I/O submitted by the initial task happens to be delayed for whatever reason, this results in soft lockup warnings via the spinning task. This is reproduced by xfs/170. To avoid this problem, fix the AGF trylock failure path to properly iterate to the next AG. If a task iterates all AGs without making progress, the trylock behavior is dropped in favor of blocking locks and thus a soft lockup is no longer possible. Fixes: f48e2df8 ("xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers") Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Yang Xu authored
Provide a proper stub for the !CONFIG_XFS_POSIX_ACL case. Also use a easy way for xfs_get_acl stub. Suggested-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by:
Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by:
-
- 21 Apr, 2022 36 commits
-
-
https://github.com/chandanr/linuxDave Chinner authored
xfs: Large extent counters The commit xfs: fix inode fork extent count overflow (3f8a4f1d) mentions that 10 billion data fork extents should be possible to create. However the corresponding on-disk field has a signed 32-bit type. Hence this patchset extends the per-inode data fork extent counter to 64 bits (out of which 48 bits are used to store the extent count). Also, XFS has an attribute fork extent counter which is 16 bits wide. A workload that, 1. Creates 1 million 255-byte sized xattrs, 2. Deletes 50% of these xattrs in an alternating manner, 3. Tries to insert 400,000 new 255-byte sized xattrs causes the xattr extent counter to overflow. Dave tells me that there are instances where a single file has more than 100 million hardlinks. With parent pointers being stored in xattrs, we will overflow the signed 16-bits wide attribute extent counter when large number of hardlinks are created. Hence this patchset extends the on-disk field to 32-bits. The following changes are made to accomplish this, 1. A 64-bit inode field is carved out of existing di_pad and di_flushiter fields to hold the 64-bit data fork extent counter. 2. The existing 32-bit inode data fork extent counter will be used to hold the attribute fork extent counter. 3. A new incompat superblock flag to prevent older kernels from mounting the filesystem. Signed-off-by:
Chandan Babu R <chandan.babu@oracle.com> Signed-off-by:
-
Dave Chinner authored
-
Dave Chinner authored
-
Dave Chinner authored
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. We also pass the fields to log to xfs_btree_offsets() as a uint32_t all cases now. I have no idea why we made that parameter a int64_t in the first place, but while we are fixing this up change it to a uint32_t field, too. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. This touches xfs_fs.h so affects the user API, but the user API fields are also unsigned so the flags should really be unsigned, too. Signed-off-by:
-
Dave Chinner authored
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. Signed-off-by:
-
Dave Chinner authored
Now that we account for log opheaders in the log item formatting code, we don't actually use the aggregated count of log iovecs in the CIL for anything. Remove it and the tracking code that calculates it. Signed-off-by:
-
Dave Chinner authored
So remove it from the interface and callers. Signed-off-by:
-
Dave Chinner authored
The rework of xlog_write() no longer requires xlog_get_iclog_state() to tell it about internal iclog space reservation state to direct it on what to do. Remove this parameter. $ size fs/xfs/xfs_log.o.* text data bss dec hex filename 26520 560 8 27088 69d0 fs/xfs/xfs_log.o.orig 26384 560 8 26952 6948 fs/xfs/xfs_log.o.patched Signed-off-by:
-
Christoph Hellwig authored
Just check that the offset in xlog_write_vec is smaller than the iclog size and remove the expensive cycling through all iclogs. Signed-off-by:
Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by:
-
Dave Chinner authored
Re-implement writing of a log vector that does not fit into the current iclog. The iclog will already be in XLOG_STATE_WANT_SYNC because xlog_get_iclog_space() will have reserved all the remaining iclog space for us, hence we can simply iterate over the iovecs in the log vector getting more iclog space until the entire log vector is written. Handling this partial write case separately means we do need to pass unnecessary state around for the common, fast path case when the log vector fits entirely within the current iclog. It isolates the complexity and allows us to modify and improve the partial write case without impacting the simple fast path. This change includes several improvements incorporated from patches written by Christoph Hellwig. Signed-off-by:
-
Dave Chinner authored
Introduce an optimised version of xlog_write() that is used when the entire write will fit in a single iclog. This greatly simplifies the implementation of writing a log vector chain into an iclog, and sets the ground work for a much more understandable xlog_write() implementation. This incorporates some factoring and simplifications proposed by Christoph Hellwig. Signed-off-by:
-
Christoph Hellwig authored
Turn ic_datap from a char into a void pointer given that it points to arbitrary data. Signed-off-by:
-
Dave Chinner authored
The caller of xlog_write() usually has a close accounting of the aggregated vector length contained in the log vector chain passed to xlog_write(). There is no need to iterate the chain to calculate he length of the data in xlog_write_calculate_len() if the caller is already iterating that chain to build it. Passing in the vector length avoids doing an extra chain iteration, which can be a significant amount of work given that large CIL commits can have hundreds of thousands of vectors attached to the chain. Signed-off-by:
-
Dave Chinner authored
xlog_tic_add_region() is used to trace the regions being added to a log ticket to provide information in the situation where a ticket reservation overrun occurs. The information gathered is stored int the ticket, and dumped if xlog_print_tic_res() is called. For a front end struct xfs_trans overrun, the ticket only contains reservation tracking information - the ticket is never handed to the log so has no regions attached to it. The overrun debug information in this case comes from xlog_print_trans(), which walks the items attached to the transaction and dumps their attached formatted log vectors directly. It also dumps the ticket state, but that only contains reservation accounting and nothing else. Hence xlog_print_tic_res() never dumps region or overrun information from this path. xlog_tic_add_region() is actually called from xlog_write(), which means it is being used to track the regions seen in a CIL checkpoint log vector chain. In looking at CIL behaviour recently, I've seen 32MB checkpoints regularly exceed 250,000 regions in the LV chain. The log ticket debug code can track *15* regions. IOWs, if there is a ticket overrun in the CIL code, the ticket region tracking code is going to be completely useless for determining what went wrong. The only thing it can tell us is how much of an overrun occurred, and we really don't need extra debug information in the log ticket to tell us that. Indeed, the main place we call xlog_tic_add_region() is also adding up the number of regions and the space used so that xlog_write() knows how much will be written to the log. This is exactly the same information that log ticket is storing once we take away the useless region tracking array. Hence xlog_tic_add_region() is not useful, but can be called 250,000 times a CIL push... Just strip all that debug "information" out of the of the log ticket and only have it report reservation space information when an overrun occurs. This also reduces the size of a log ticket down by about 150 bytes... Signed-off-by:
-
Dave Chinner authored
Current xlog_write() adds op headers to the log manually for every log item region that is in the vector passed to it. While xlog_write() needs to stamp the transaction ID into the ophdr, we already know it's length, flags, clientid, etc at CIL commit time. This means the only time that xlog write really needs to format and reserve space for a new ophdr is when a region is split across two iclogs. Adding the opheader and accounting for it as part of the normal formatted item region means we simplify the accounting of space used by a transaction and we don't have to special case reserving of space in for the ophdrs in xlog_write(). It also means we can largely initialise the ophdr in transaction commit instead of xlog_write, making the xlog_write formatting inner loop much tighter. xlog_prepare_iovec() is now too large to stay as an inline function, so we move it out of line and into xfs_log.c. Object sizes: text data bss dec hex filename 1125934 305951 484 1432369 15db31 fs/xfs/built-in.a.before 1123360 305951 484 1429795 15d123 fs/xfs/built-in.a.after So the code is a roughly 2.5kB smaller with xlog_prepare_iovec() now out of line, even though it grew in size itself. Signed-off-by:
-
Dave Chinner authored
To include log op headers directly into the log iovec regions that the ophdrs wrap, we need to move the buffer alignment code from xlog_finish_iovec() to xlog_prepare_iovec(). This is because the xlog_op_header is only 12 bytes long, and we need the buffer that the caller formats their data into to be 8 byte aligned. Hence once we start prepending the ophdr in xlog_prepare_iovec(), we are going to need to manage the padding directly to ensure that the buffer pointer returned is correctly aligned. Signed-off-by:
-
Dave Chinner authored
We currently set the log ticket client ID when we reserve a transaction. This client ID is only ever written to the log by a CIL checkpoint or unmount records, and so anything using a high level transaction allocated through xfs_trans_alloc() does not need a log ticket client ID to be set. For the CIL checkpoint, the client ID written to the journal is always XFS_TRANSACTION, and for the unmount record it is always XFS_LOG, and nothing else writes to the log. All of these operations tell xlog_write() exactly what they need to write to the log (the optype) and build their own opheaders for start, commit and unmount records. Hence we no longer need to set the client id in either the log ticket or the xfs_trans. Signed-off-by:
-
Dave Chinner authored
Remove the final case where xlog_write() has to prepend an opheader to a log transaction. Similar to the start record, the commit record is just an empty opheader with a XLOG_COMMIT_TRANS type, so we can just make this the payload for the region being passed to xlog_write() and remove the special handling in xlog_write() for the commit record. Signed-off-by:
-
Dave Chinner authored
Remove another case where xlog_write() has to prepend an opheader to a log transaction. The unmount record + ophdr is smaller than the minimum amount of space guaranteed to be free in an iclog (2 * sizeof(ophdr)) and so we don't have to care about an unmount record being split across 2 iclogs. Signed-off-by:
-
Dave Chinner authored
So move the one-off start record writing in xlog_write() out into the static header that the CIL push builds to write into the log initially. This simplifes the xlog_write() logic a lot. pahole on x86-64 confirms that the xlog_cil_trans_hdr is correctly 32 bit aligned and packed for copying the log op and transaction headers directly into the log as a single log region copy. struct xlog_cil_trans_hdr { struct xlog_op_header oph[2]; /* 0 24 */ struct xfs_trans_header thdr; /* 24 16 */ struct xfs_log_iovec lhdr[2]; /* 40 32 */ /* size: 72, cachelines: 2, members: 3 */ /* last cacheline: 8 bytes */ }; A wart is needed to handle the fact that length of the region the opheader points to doesn't include the opheader length. hence if we embed the opheader, we have to substract the opheader length from the length written into the opheader by the generic copying code. This will eventually go away when everything is converted to embedded opheaders. Signed-off-by: -
Dave Chinner authored
It is static code deep in the middle of the CIL push logic. Factor it out into a helper so that it is clear and easy to modify separately. Signed-off-by:
-
