struct 'tipc_node' currently contains two arrays for link attributes,
one for the link pointers, and one for the usable link MTUs.

We now group those into a new struct 'tipc_link_entry', and intoduce
one single array consisting of such enties. Apart from being a cosmetic
improvement, this is a starting point for the strict master-slave
relation between node and link that we will introduce in the following
commits.
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's not used anywhere.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Scott Feldman says:

====================
switchdev: avoid duplicate packet forwarding

v3:

 - Per Nicolas Dichtel review: remove errant empty union.

v2:

 - Per davem review: in sk_buff, union fwd_mark with secmark to save space
   since features appear to be mutually exclusive.
 - Per Simon Horman review:
   - fix grammar in switchdev.txt wrt fwd_mark
   - remove some unrelated changes that snuck in

v1:

This patchset was previously submitted as RFC.  No changes from the last
version (v2) sent under RFC.  Including RFC version history here for reference.

RFC v2:

 - s/fwd_mark/offload_fwd_mark
 - use consume_skb rather than kfree_skb when dropping pkt on egress.
 - Use Jiri's suggestion to use ifindex of one of the ports in a group
   as the mark for all the ports in the group.  This can be done with
   no additional storage (no hashtable from v1).  To pull it off, we
   need some simple recursive routines to walk the netdev tree ensuring
   all leaves in the tree (ports) in the same group (e.g. bridge)
   belonging to the same switch device will have the same offload fwd mark.
   Maybe someone sees a better design for the recusive routines?  They're
   not too bad, and should cover the stacked driver cases.

RFC v1:

With switchdev support for offloading L2/L3 forwarding data path to a
switch device, we have a general problem where both the device and the
kernel may forward the packet, resulting in duplicate packets on the wire.
Anytime a packet is forwarded by the device and a copy is sent to the CPU,
there is potential for duplicate forwarding, as the kernel may also do a
forwarding lookup and send the packet on the wire.

The specific problem this patch series is interested in solving is avoiding
duplicate packets on bridged ports.  There was a previous RFC from Roopa
(http://marc.info/?l=linux-netdev&m=142687073314252&w=2) to address this
problem, but didn't solve the problem of mixed ports in the bridge from
different devices; there was no way to exclude some ports from forwarding
and include others.  This RFC solves that problem by tagging the ingressing
packet with a unique mark, and then comparing the packet mark with the
egress port mark, and skip forwarding when there is a match.  For the mixed
ports bridge case, only those ports with matching marks are skipped.

The switchdev port driver must do two things:

1) Generate a fwd_mark for each switch port, using some unique key of the
   switch device (and optionally port).  This is done when the port netdev
   is registered or if the port's group membership changes (joins/leaves
   a bridge, for example).

2) On packet ingress from port, mark the skb with the ingress port's
   fwd_mark.  If the device supports it, it's useful to only mark skbs
   which were already forwarded by the device.  If the device does not
   support such indication, all skbs can be marked, even if they're
   local dst.

Two new 32-bit fields are added to struct sk_buff and struct netdevice to
hold the fwd_mark.  I've wrapped these with CONFIG_NET_SWITCHDEV for now. I
tried using skb->mark for this purpose, but ebtables can overwrite the
skb->mark before the bridge gets it, so that will not work.

In general, this fwd_mark can be used for any case where a packet is
forwarded by the device and a copy is sent to the CPU, to avoid the kernel
re-forwarding the packet.  sFlow is another use-case that comes to mind,
but I haven't explored the details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

If device flags ingress packet as "fwd offload", mark the
skb->offlaod_fwd_mark using the ingress port's dev->offlaod_fwd_mark.  This
will be the hint to the kernel that this packet has already been forwarded
by device to egress ports matching skb->offlaod_fwd_mark.

For rocker, derive port dev->offlaod_fwd_mark based on device switch ID and
port ifindex.  If port is bridged, use the bridge ifindex rather than the
port ifindex.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be
unique for device and may even be unique for a sub-set of ports within
device, so add switchdev helper function to generate unique marks based on
port's switch ID and group_ifindex.  group_ifindex would typically be the
container dev's ifindex, such as the bridge's ifindex.

The generator uses a global hash table to store offload_fwd_marks hashed by
{switch ID, group_ifindex} key.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just before queuing skb for xmit on port, check if skb has been marked by
switchdev port driver as already fordwarded by device.  If so, drop skb.  A
non-zero skb->offload_fwd_mark field is set by the switchdev port
driver/device on ingress to indicate the skb has already been forwarded by
the device to egress ports with matching dev->skb_mark.  The switchdev port
driver would assign a non-zero dev->offload_skb_mark for each device port
netdev during registration, for example.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Teach rocker to forward packets to CPU when a port is joined to Open vSwitch.
There is scope to later refine what is passed up as per Open vSwitch flows
on a port.

This does not change the behaviour of rocker ports that are
not joined to Open vSwitch.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix:
net/bridge/br_if.c: In function 'br_dev_delete':
>> net/bridge/br_if.c:284:2: error: implicit declaration of function
>> 'br_multicast_dev_del' [-Werror=implicit-function-declaration]
     br_multicast_dev_del(br);
     ^
   cc1: some warnings being treated as errors

when igmp snooping is not defined.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Newly created flows don't have flowi6_oif set (at least if the
associated socket is not interface-bound). This leads to a mismatch in
__xfrm6_selector_match() for policies which specify an interface in the
selector (sel->ifindex != 0).

Backtracing shows this happens in code-paths originating from e.g.
ip6_datagram_connect(), rawv6_sendmsg() or tcp_v6_connect(). (UDP was
not tested for.)

In summary, this patch fixes policy matching on outgoing interface for
locally generated packets.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

Get rid of these:
drivers/net/bonding//bond_main.c: In function ‘bond_update_slave_arr’:
drivers/net/bonding//bond_main.c:3754:6: warning: variable
‘slaves_in_agg’ set but not used [-Wunused-but-set-variable]
  int slaves_in_agg;
      ^
  CC [M]  drivers/net/bonding//bond_3ad.o
drivers/net/bonding//bond_3ad.c: In function
‘ad_marker_response_received’:
drivers/net/bonding//bond_3ad.c:1870:61: warning: parameter ‘marker’
set but not used [-Wunused-but-set-parameter]
 static void ad_marker_response_received(struct bond_marker *marker,
                                                             ^
drivers/net/bonding//bond_3ad.c:1871:19: warning: parameter ‘port’ set
but not used [-Wunused-but-set-parameter]
      struct port *port)
                   ^
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
bridge: multicast: temp and perm entries behaviour enhancements

Patch 01 adds a notify when a group is deleted via br_multicast_del_pg()
(on expire, on device delete or on device down).
Patch 02 changes how bridge device and bridge port delete and down/up are
handled. Until now on bridge down all groups were flushed, now only the
temp ones are (same for port), perm entries are flushed only on port or
bridge removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the bridge (or port) is brought down/up flush only temp entries and
leave the perm ones. Flush perm entries only when deleting the bridge
device or the associated port.
Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Group notifications were not sent when a group expired or was deleted
due to bridge/port device being deleted. So add br_mdb_notify() to
br_multicast_del_pg().
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
BPF update

This small helper allows for accessing net_cls cgroups classid. Please
see individual patches for more details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It would be very useful to retrieve the net_cls's classid from an eBPF
program to allow for a more fine-grained classification, it could be
directly used or in conjunction with additional policies. I.e. docker,
but also tooling such as cgexec, can easily run applications via net_cls
cgroups:

  cgcreate -g net_cls:/foo
  echo 42 > foo/net_cls.classid
  cgexec -g net_cls:foo <prog>

Thus, their respecitve classid cookie of foo can then be looked up on
the egress path to apply further policies. The helper is desigend such
that a non-zero value returns the cgroup id.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split out retrieving the cgroups net_cls classid retrieval into its
own function, so that it can be reused later on from other parts of
the traffic control subsystem. If there's no skb->sk, then the small
helper returns 0 as well, which in cls_cgroup terms means 'could not
classify'.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

* Allow setting of adaptive coalescing setting for all types of interrupt.

* In msi & legacy intr, we use single interrupt for rx & tx. In this case
  tx_coalesce_usecs is invalid. We should use only rx_coalesce_usecs.
  Do not display tx_coal values for msi/intx. And do not allow user to set
  this as well.

* Driver supports only tx/rx_coalesce_usec and adaptive coalesce settings.
  For other values, driver does not return error. So ethtool succeeds for
  unsupported values. Introduce enic_coalesce_valid() function to validate
  the coalescing values.

* If user requests for coalesce value greater than what adaptor supports,
  driver uses the max value. We should at least log this.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adaptive interrupt coalescing is available for msix. This patch adds the support
for msi poll. Interface for adaptive interrupt coalescing is already added in
driver. We just did not enable it for legacy intr & msi.

enic_calc_int_moderation() & enic_set_int_moderation() are defined as static
after enic_poll. Since enic_poll needs it, move both of these function
definitions above enic_poll. No change in functionality.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Anuradha Karuppiah says:

====================
net: Introduce protodown flag.

User space daemons can detect errors in the network that need to be
notified to the switch device drivers.

Drivers can react to this error state by doing a phy-down on the
switch-port which would result in a carrier-off locally and on the directly
connected switch. Doing that would prevent loops and black-holes in the
network.

One such use case is the multi-chassis LAG application -

1. The MLAG application runs on peer switches (say Switch0 and Switch1)
   synchronizing states, forwarding entries etc. between the two
   switches over the peer-link (this is a link directly connecting the
   two switches).
2. An MLAG election process designates one of the switches as a primary
   (for e.g. Switch0 is primary and Switch1 is secondary).
3. The peer link plays a critical role in allowing Switch0-Switch1 to
   function as a single LAG partner to the downstream dual-connected
   servers. When the peer-link between the switches goes down we have a
   split-brain situation. Switch0 and Switch1 are no longer in sync and
   are acting independently. This can result in traffic loops and
   traffic black-holing in the network.
4. To prevent these problems the MLAG application on the secondary
   switch phy-downs the MLAG ports on detecting the peer-link down.
   This will be seen as a carrier down on servers that are
   dual-connected to Switch0 and Switch1.
5. Specifically a dual-connected server will see a carrier-down on the
   port connected to the MLAG secondary, Switch1, and will stop using
   that port for traffic TX. So traffic black holing is prevented.

v6 to v7:
   Removed some unnecessary code in response to review comments.

v5 to v6:
   Replaced proto_flags with a simple proto_down boolean attribute in
   response to Dave's comments.

v4 to v5:
   Changed the ip link display format for protodown to match the set as
   recommended by Stephen.

v3 to v4:
   I have moved protodown out of IFF_XXX and introduced a separate
   proto_flags field with IF_PROTOF_DOWN bit being used by apps to notify
   switch port errors. This is in response to Stephen's comments that
   adding a new IFF_XXX may break user space.

   I have used rocker as the sample switch driver. And to test this
   functionality I used the qemu-rocker patch that Scott sent out in
   response to the v3 posting (needed to set link up/down when phy is
   enabled/disabled).

v1 to v2:
   Based on Dave's suggestion I have moved out aggregating of error bits
   across applications to a user space framework. This patch now simply
   notifies an aggregated error bit to drivers enabling them to handle
   the error gracefully.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

protodown can be set by user space applications like MLAG on detecting
errors on a switch port. This patch provides sample switch driver changes
for handling protodown. Rocker PHYS disables the port in response to
protodown.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces the proto_down flag that can be used by user space
applications to notify switch drivers that errors have been detected on the
device.

The switch driver can react to protodown notification by doing a phys down
on the associated switch port.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for a new method of signalling the firmware
that TSO packets are being sent. The new method removes the need to
alter the ip and tcp checksums and allows TSO6 support.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current change mtu call only stops tx before removing RNDIS filter.
In case ringbufer is not empty, the rndis_filter_device_remove() may
hang on removing the buffers.

This patch adds close of RNDIS filter before removing it, also a
gradual waiting loop until the ring is empty. The change_mtu hang
issue under heavy traffic is solved by this patch.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 9131f3de ("ipv6: Do not iterate over all interfaces when
finding source address on specific interface.") did not properly
update best source address available.  Plus, it introduced
possible NULL pointer dereference.

Bug was reported by Erik Kline <ek@google.com>.
Based on patch proposed by Hajime Tazaki <thehajime@gmail.com>.

Fixes: 9131f3de ("ipv6: Do not
	iterate over all interfaces when finding source address
	on specific interface.")
Signed-off-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com>
Acked-by: Hajime Tazaki <thehajime@gmail.com>
Acked-by: Erik Kline <ek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-07-14

This series contains updates to i40e and i40evf only.

Joe Stringer and Jesse Gross add a ndo_features_check function to ensure
that the i40e driver does not try to offload packets that exceed 80 bytes
in length.

Anjali adds additional stats to track flow director ATR and SB current
state and flow director flush count which will help the need for verbose
debug logs with respect to flow director.  Also refines an error message
to avoid confusion, so that it indicates what may have really happened
when the init_shared_code() call possibly fails.

Pawel adds new fields to the capabilities structures to handle Flex-10
device/function capabilities which is needed to support Flex-10 configs.

Jesse improves the transmit performance by added a prefetch for the
next transmit descriptor to be used when we know there are more coming.

Mitch modifies i40evf driver to handle/allow an abundance of vectors.
Currently the driver only maps transmit and receive queues to a single
MSI-X vector per queue if there are exactly enough vectors for this, but
if we have too many vectors, it will fail and allocate queues to vectors
in a suboptimal manner.  So change the condition check to allow for an
excess number of vectors and won't use the extras.  Also update the
driver to just return success if the user attempts to set a port VLAN on
a VF that already has the same port VLAN configured, instead of going
through unnecessary filter removals & adds.  Fix the MAC filters for VFs,
which were being programmed with 0 for the VLAN value when there was no
VLAN assigned.  Instead, we must use -1 to indicate that no VLAN is in
use.  Fix the VF disable code, which was not properly cleaning up the VF
and would leave the VF in an indeterminate state, so fix this by
notifying the VF and then call the normal VF reset routine.  Fix the
logic in the driver so that MAC filters are added and removed correctly
and added a check for the driver's hardware MAC address so that this
filter does not get removed incorrectly.

Carolyn removes incorrect #ifdef's which should not have been added in
the first place and with the #ifdef's removed, make the necessary
changes in the driver to resolve compile errors.

Greg updates the admin queue command header defines.

v2: fix indentation in patch 12 based on feedback from Sergei Shtylyov
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The member (u32) "num_active_agg" of struct qfq_sched has been unused
since its introduction in 462dbc91
"pkt_sched: QFQ Plus: fair-queueing service at DRR cost" and (AFAICT)
there is no active plan to use it; this removes the member.
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paolo Valente <paolo.valente@unimore.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to memset memory allocated with vzalloc.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Claudiu Manoil says:

====================
gianfar: Add Rx S/G

This patch-set introduces scatter/gather support
on the Rx side, addressing Rx path performance
issues in the driver.
Thanks.

As an example, two boards connected back-to-back
were used to measure the throughput, running the
same kernel 4.1, before and after applying these
patches.
The netperf UDP_STREAM results below show that the
bottleneck lies on the Rx side BEFORE applying the
patches, and that the Rx throughput is even lower
with a larger MTU.  AFTER applying the patches the
Rx bottleneck is gone (Rx throughput matches the
Tx one) and the RX throughput is not influenced by
MTU size any longer (as expected).

BEFORE:

1) MTU 1500 (default)

root@p1010rdb-pb:~# netperf -l 150 -cC -H 192.85.1.1 -p 12867 -t UDP_STREAM -- -m 512
MIGRATED UDP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 192.85.1.1 () port 0 AF_INET
Socket  Message  Elapsed      Messages                   CPU      Service
Size    Size     Time         Okay Errors   Throughput   Util     Demand
bytes   bytes    secs            #      #   10^6bits/sec % SS     us/KB

163840     512   150.00    20119124      0      549.4     100.00   14.911
163840           150.00    14057349             383.9     100.00   14.911

root@p1010rdb-pb:~# netperf -l 150 -cC -H 192.85.1.1 -p 12867 -t UDP_STREAM -- -m 64
MIGRATED UDP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 192.85.1.1 () port 0 AF_INET
Socket  Message  Elapsed      Messages                   CPU      Service
Size    Size     Time         Okay Errors   Throughput   Util     Demand
bytes   bytes    secs            #      #   10^6bits/sec % SS     us/KB

163840      64   150.00    23654013      0       80.7     100.00   101.463
163840           150.00    15875288              54.2     100.00   101.463

2) MTU 8000

root@p1010rdb-pb:~# netperf -l 150 -cC -H 192.85.1.1 -p 12867 -t UDP_STREAM -- -m 512
MIGRATED UDP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 192.85.1.1 () port 0 AF_INET
Socket  Message  Elapsed      Messages                   CPU      Service
Size    Size     Time         Okay Errors   Throughput   Util     Demand
bytes   bytes    secs            #      #   10^6bits/sec % SS     us/KB

163840     512   150.00    20067232      0      548.0     100.00   14.950
163840           150.00    6113498             166.9     99.95    14.942

root@p1010rdb-pb:~# netperf -l 150 -cC -H 192.85.1.1 -p 12867 -t UDP_STREAM -- -m 64
MIGRATED UDP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 192.85.1.1 () port 0 AF_INET
Socket  Message  Elapsed      Messages                   CPU      Service
Size    Size     Time         Okay Errors   Throughput   Util     Demand
bytes   bytes    secs            #      #   10^6bits/sec % SS     us/KB

163840      64   150.00    23621279      0       80.6     100.00   101.604
163840           150.00    5868602              20.0     99.96    101.563

AFTER:
(both MTU 1500 and MTU 8000)

root@p1010rdb-pb:~# netperf -l 150 -cC -H 192.85.1.1 -p 12867 -t UDP_STREAM -- -m 512
MIGRATED UDP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 192.85.1.1 () port 0 AF_INET
Socket  Message  Elapsed      Messages                   CPU      Service
Size    Size     Time         Okay Errors   Throughput   Util     Demand
bytes   bytes    secs            #      #   10^6bits/sec % SS     us/KB

163840     512   150.00    19914969      0      543.8     100.00   15.064
163840           150.00    19914969             543.8     99.35    14.966

root@p1010rdb-pb:~# netperf -l 150 -cC -H 192.85.1.1 -p 12867 -t UDP_STREAM -- -m 64
MIGRATED UDP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 192.85.1.1 () port 0 AF_INET
Socket  Message  Elapsed      Messages                   CPU      Service
Size    Size     Time         Okay Errors   Throughput   Util     Demand
bytes   bytes    secs            #      #   10^6bits/sec % SS     us/KB

163840      64   150.00    23433989      0       80.0     100.00   102.416
163840           150.00    23433989              80.0     99.62    102.023
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The eTSEC h/w is capable of scatter/gather on the receive side
too if MAXFRM > MRBLR, when the allowed maximum Rx frame size
is set to be greater than the maximum Rx buffer size (MRBLR).
It's about time the driver makes use of this h/w capability,
by supporting fixed buffer sizes and Rx S/G.

The buffer size given to eTSEC for reception is fixed to
1536B (must be multiple of 64), which is the same default
buffer size as before, used to accommodate standard MTU
(1500B) size frames.  As before, eTSEC can receive frames of
up to 9600B.  Individual Rx buffers are mapped to page halves
(page size for eTSEC systems is 4KB).  The skb is built around
the first buffer of a frame (using build_skb()).  In case the
frame spans multiple buffers, the trailing buffers are added
as Rx fragments to the skb.  The last buffer in frame is marked
by the L status flag.  A mechanism is in place to reuse the pages
owned by the driver (for Rx) for subsequent receptions.

Supporting fixed size buffers allows the implementation of Rx S/G,
which in turn removes the memory pressure issues the driver had
before when MTU was set for jumbo frame reception.
Also, in most cases, the Rx path becomes faster due to Rx page
reusal, since the overhead of allocating new rx buffers is removed
from the fast path.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use "ndev" instead of "dev", as the rx queue back pointer
to a net_device struct, to avoid name clashing with a
"struct device" reference.  This prepares the addition of a
"struct device" back pointer to the rx queue structure.

Remove duplicated rxq registration in the process.
Move napi_gro_receive() outside gfar_process_frame().
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several (long standing) problems about how the status
field of the rx buffer descriptor (rxbd) is currently handled on
the error path:
- too many unnecessary 16bit reads of the two halves of the rxbd
status field (32bit), also resulting in overuse of endianness
convesion macros;
- "bdp->status = RXBD_LARGE" makes no sense, since the "large"
flag is read only (only eTSEC can write it), and trying to clear
the other status bits is also error prone in this context
(most of the rx status bits are read only anyway).

This is fixed with a single 32bit read of the "status" field,
and then the appropriate 16bit shifting is applied to access
the various status bits or the rx frame length. Also corrected
the use of the RXBD_LARGE flag.

Additional fix:
"rx_over_errors" stat is incremented instead of "rx_crc_errors"
in case of RXBD_OVERRUN occurrence.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a more common consumer/ producer index design to improve
rx buffer allocation.  Instead of allocating a single new buffer
(skb) on each iteration, bundle the allocation of several rx
buffers at a time.  This also opens the path for further memory
optimizations.

Remove useless check of rxq->rfbptr, since this patch touches
rx pause frame handling code as well.  rxq->rfbptr is always
initialized as part of Rx BD ring init.
Remove redundant (and misleading) 'amount_pull' parameter.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bump.

Change-ID: I84573d9fa51effc5b29bf5b8c74e3cc8b2673f48
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Change a warning message to indicate what may have really happened when
the init_shared_code call fails.

Change-ID: I616ace40fed120d0dec86dfc91ab2d7cde466904
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The i40e_add_pd_table_entry() routine is being modified to handle both
cases where a backing page is passed and where backing page is allocated
in i40e_add_pd_table_entry().

For PBLE resource management, it is more efficient for it to manage its
backing pages. For VF, PBLE backing page addresses will be send to PF
driver for PBLE resource.

The i40e_remove_pd_bp() is also modified to not free pre-allocated pages and
free only ones which were allocated in i40e_add_pd_table_entry().

Change-ID: Ie673f0403f22979e9406f5a94048dceb91bcf9a8
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

During close, all of the MAC filters are cleared, so the driver would be
unable to receive unicast packets after being closed and reopened.

Add the adapter's "hardware" MAC address filter in open, not init. This
ensures that the correct filter is present each time.

Change-ID: I51a11e9c1200139dab6f66a5353bd38c7d26f875
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>