- 26 Mar, 2024 4 commits
-
-
Colin Ian King authored
There is a spelling mistake in a drm_err message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240326100219.43989-1-colin.i.king@gmail.com
-
Boris Brezillon authored
The kernel doc prefix is /** not /*. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Heiko Stuebner authored
The init sequence specifies the 0x11 and 0x29 dsi commands, which are the exit-sleep and display-on commands. In the actual prepare step the driver already uses the appropriate function calls for those, so drop the duplicates. Fixes: e5f9d543 ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant") Signed-off-by:
Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by:
Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-2-heiko@sntech.de
-
Heiko Stuebner authored
Similar to other variants, the LTK050H3148W wants to run in video mode when displaying data. So far only the Synopsis DSI driver was using this panel and it is always switching to video mode, independent of this flag being set. Other DSI drivers might handle this differently, so add the flag. Fixes: e5f9d543 ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant") Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-1-heiko@sntech.de
-
- 25 Mar, 2024 9 commits
-
-
Pin-yen Lin authored
Add support for the AUO B120XAN01.0 panel. Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Adrián Larumbe authored
If job accounting is disabled, then both fdinfo's drm-engine and drm-cycle key values will remain immutable. In that case, it makes more sense not to display them at all to avoid confusing user space profiling tools. Signed-off-by:
Adrián Larumbe <adrian.larumbe@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Allow width and height properties from panel-common.yaml, already used on some boards: sdm845-sony-xperia-tama-apollo.dtb: panel@0: 'height-mm', 'width-mm' do not match any of the regexes: 'pinctrl-[0-9]+' Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240325103227.27474-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240325103227.27474-1-krzysztof.kozlowski@linaro.org
-
Krzysztof Kozlowski authored
The panel-common schema does not define what "ports" property is, so bring the definition by referencing the panel-common-dual.yaml. Panels can be single- or dual-link, depending on the compatible, thus add if:then:else: block narrowing ports per variant. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240325103611.28240-3-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The panel-common schema does not define what "ports" property is, so bring the definition by referencing the panel-common-dual.yaml. Panels can be single- or dual-link, thus require only one port@0. Signed-off-by:
-
Krzysztof Kozlowski authored
Add schema with common properties shared among dual-link panel ICs. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Arnd Bergmann authored
The array size calculation in pvr_vm_mips_fini() appears to be incorrect based on taking the size of the pointer rather than the size of the array, which manifests as a warning about signed integer overflow: In file included from include/linux/kernel.h:16, from drivers/gpu/drm/imagination/pvr_rogue_fwif.h:10, from drivers/gpu/drm/imagination/pvr_ccb.h:7, from drivers/gpu/drm/imagination/pvr_device.h:7, from drivers/gpu/drm/imagination/pvr_vm_mips.c:4: drivers/gpu/drm/imagination/pvr_vm_mips.c: In function 'pvr_vm_mips_fini': include/linux/array_size.h:11:25: error: overflow in conversion from 'long unsigned int' to 'int' changes value from '18446744073709551615' to '-1' [-Werror=overflow] 11 | #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) | ^ drivers/gpu/drm/imagination/pvr_vm_mips.c:106:24: note: in expansion of macro 'ARRAY_SIZE' 106 | for (page_nr = ARRAY_SIZE(mips_data->pt_pages) - 1; page_nr >= 0; page_nr--) { | ^~~~~~~~~~ Just use the number of array elements directly here, and in the corresponding init function for consistency. Fixes: 927f3e02 ("drm/imagination: Implement MIPS firmware processor and MMU support") Reviewed-by:Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/lkml/9df9e4f87727399928c068dbbf614c9895ae15f9.camel@imgtec.com/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Matt Coster <matt.coster@imgtec.com>
-
Steven Price authored
virt_to_pfn() isn't available on x86 (except to xen) so breaks COMPILE_TEST builds. Avoid its use completely by instead storing the struct page pointer allocated in panthor_device_init() and using page_to_pfn() instead. Signed-off-by:
-
Boris Brezillon authored
Putting a hard dependency on CONFIG_PM is not possible because of a circular dependency issue, and it's actually not desirable either. In order to support this use case, we forcibly resume at init time, and suspend at unplug time. v2: - Drop the #ifdef CONFIG_PM section around panthor_pm_ops's definition Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403031944.EOimQ8WK-lkp@intel.com/Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318153117.1321544-1-boris.brezillon@collabora.com
-
- 20 Mar, 2024 3 commits
-
-
Douglas Anderson authored
When the atna33xc20 driver was first written the resume code never returned an error. If there was a problem waiting for HPD it just printed a warning and moved on. This changed in response to review feedback [1] on a future patch but I accidentally didn't account for rolling back the regulator enable in the error cases. Do so now. [1] https://lore.kernel.org/all/5f3cf3a6-1cc2-63e4-f76b-4ee686764705@linaro.org/ Fixes: 3b5765df ("drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux") Acked-by:
-
Christian König authored
The BOs in a bulk move must share all the same reservation object to make sure that we lock the whole bulk during eviction. Actually document and enforce that with a warning. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312105555.3065-1-christian.koenig@amd.com
-
Marek Vasut authored
In case the LCDIF is enabled in DT but unused, the clocks used by the LCDIF are not enabled. Those clocks may even have a use count of 0 in case there are no other users of those clocks. This can happen e.g. in case the LCDIF drives HDMI bridge which has no panel plugged into the HDMI connector. Do not attempt to disable clocks in the suspend callback and re-enable clocks in the resume callback unless the LCDIF is enabled and was in use before the system entered suspend, otherwise the driver might end up trying to disable clocks which are already disabled with use count 0, and would trigger a warning from clock core about this condition. Note that the lcdif_rpm_suspend() and lcdif_rpm_resume() functions internally perform the clocks disable and enable operations and act as runtime PM hooks too. Reviewed-by:
Liu Ying <victor.liu@nxp.com> Fixes: 9db35bb3 ("drm: lcdif: Add support for i.MX8MP LCDIF variant") Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240226082644.32603-1-marex@denx.de
-
- 19 Mar, 2024 3 commits
-
-
Nathan Morrisson authored
Add support for the POWERTIP PH128800T006-ZHC01 10.1" (1280x800) LCD-TFT panel. Signed-off-by:
Nathan Morrisson <nmorrisson@phytec.com> Acked-by:
-
Nathan Morrisson authored
Add POWERTIP PH128800T-006-ZHC01 10.1" LCD-TFT LVDS panel compatible string. Signed-off-by:
-
Laurent Pinchart authored
Commit 00084f0c ("drm: bridge: thc63lvd1024: Switch to use of_graph_get_remote_node()") simplified the thc63lvd1024 driver by replacing hand-rolled code with a helper function. While doing so, it created an error code path at probe time without any error message, potentially causing probe issues that get annoying to debug. Fix it by adding an error message. Fixes: 00084f0c ("drm: bridge: thc63lvd1024: Switch to use of_graph_get_remote_node()") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
-
- 18 Mar, 2024 9 commits
-
-
Sui Jingfeng authored
To reduce boilerplate, use of_graph_get_remote_node() helper instead of the hand-rolling code. Signed-off-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240316172800.1168390-1-sui.jingfeng@linux.devSigned-off-by:
-
Sui Jingfeng authored
The calling of of_device_is_available() in it66121_probe() is duplicated, as the of_graph_get_remote_node() has already do the check for us. There is no need to call it again, thus delete the later one. Signed-off-by:
-
Sui Jingfeng authored
To reduce boilerplate, use of_graph_get_remote_node() helper instead of the hand-rolling code. Signed-off-by:
-
Sui Jingfeng authored
If a specific design doesn't wire IT66121's interrupt signal output pin up to the display controller side, then we should not register the interrupt handler. Such a decision is valid usage, as we can fall back to polling mode. So, don't make the assumption that a specific board always supports HPD. Carry out a sanity check on 'client->irq' before using it, fall back to polling mode if client->irq < 0 is true. Such a design increases the overall flexibility. Signed-off-by:
-
Laurent Pinchart authored
The ilitek-ili9881c controls the reset GPIO using the non-sleeping gpiod_set_value() function. This complains loudly when the GPIO controller needs to sleep. As the caller can sleep, use gpiod_set_value_cansleep() to fix the issue. Signed-off-by:
-
Laurent Pinchart authored
Add support for the Startek KD050HDFIA020-C020A panel. The init table comes from the Compulab BSP ([1]). [1] https://github.com/compulab-yokneam/meta-bsp-imx8mp/blob/ucm-imx8m-plus-r1.1/recipes-kernel/linux/compulab/imx8mp/0000-compulab-imx8m-plus-Add-boards-support.patchSigned-off-by:
-
Laurent Pinchart authored
Document the compatible value for Startek KD050HDFIA020-C020A panels. Signed-off-by:
-
Tony Lindgren authored
Commit 95da53d6 ("drm/omapdrm: Use regular fbdev I/O helpers") stopped console from updating for command mode displays because there is no damage handling in fb_sys_write() unlike we had earlier in drm_fb_helper_sys_write(). Let's fix the issue by adding FB_GEN_DEFAULT_DEFERRED_DMAMEM_OPS and FB_DMAMEM_HELPERS_DEFERRED as suggested by Thomas. We cannot use the FB_DEFAULT_DEFERRED_OPS as fb_deferred_io_mmap() won't work properly for write-combine. Fixes: 95da53d6 ("drm/omapdrm: Use regular fbdev I/O helpers") Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240228063540.4444-3-tony@atomide.com
-
Tony Lindgren authored
The framebuffer console stopped updating with commit f231af49 ("drm/fb-helper: Disconnect damage worker from update logic"). Let's fix the issue by implementing fb_dirty similar to what was done with commit 039a72ce ("drm/i915/fbdev: Implement fb_dirty for intel custom fb helper"). Fixes: f231af49 ("drm/fb-helper: Disconnect damage worker from update logic") Reviewed-by:
-
- 15 Mar, 2024 1 commit
-
-
Lyude Paul authored
I've recently been seeing some unexplained GSP errors on my RTX 6000 from failed aux transactions: [ 132.915867] nouveau 0000:1f:00.0: gsp: cli:0xc1d00002 obj:0x00730000 ctrl cmd:0x00731341 failed: 0x0000ffff While the cause of these is not yet clear, these messages made me notice that the aux transactions causing these transactions were succeeding - not failing. As it turns out, this is because we're currently not returning the correct variable when r535_dp_aux_xfer() hits an error - causing us to never propagate GSP errors for failed aux transactions to userspace. So, let's fix that. Fixes: 4ae3a201 ("nouveau/gsp: don't free ctrl messages on errors") Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240315212104.776936-1-lyude@redhat.com
-
- 14 Mar, 2024 5 commits
-
-
Hsin-Yi Wang authored
There are 2 different AUO panels using the same panel id. One of the variants requires using overridden modes to resolve glitching issue as described in commit 70e0d555 ("drm/panel-edp: Add auo_b116xa3_mode"). Other variants should use the modes parsed from EDID. Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
-
Hsin-Yi Wang authored
It's found that some panels have variants that they share the same panel id although their EDID and names are different. When matching generic edp panels, we should first match with both panel identity, which contains both panel id and panel name. If not found, match with panel id only. Signed-off-by:
-
Hsin-Yi Wang authored
Currently edid quirks are matched by panel id only. Modify it to match with identity so it's easier to be extended for more complex matching if required. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Hsin-Yi Wang authored
Create a type drm_edid_ident as the identity of an EDID. Currently it contains panel id and monitor name. Create a function that can match a given EDID and an identity: 1. Reject if the panel id doesn't match. 2. If name is not null in identity, try to match it in the detailed timing blocks. Note that some panel vendors put the monitor name after EDID_DETAIL_MONITOR_STRING. Signed-off-by:
-
Hsin-Yi Wang authored
It's found that some panels have variants that they share the same panel id although their EDID and names are different. Besides panel id, now we need more information from the EDID base block to distinguish these panel variants. Add drm_edid_read_base_block() to return the EDID base block, which is wrapped in struct drm_edid. Caller can further use it to get panel id or check if the block contains certain strings, such as panel name. Merge drm_edid_get_panel_id() and edid_extract_panel_id() into one function. Signed-off-by:
-
- 13 Mar, 2024 3 commits
-
-
Jérémie Dautheribes authored
Add support for Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel. Suggested-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Jérémie Dautheribes <jeremie.dautheribes@bootlin.com> Reviewed-by:
-
Jérémie Dautheribes authored
Add Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel compatible string. Acked-by:
-
Jérémie Dautheribes authored
Update Documentation/devicetree/bindings/vendor-prefixes.yaml to include "cct" as a vendor prefix for "Crystal Clear Technology". CCT is the vendor of the CMT430B19N00 TFT-LCD panel. Link: http://www.cct.com.my/Acked-by:
-
- 12 Mar, 2024 3 commits
-
-
Jiapeng Chong authored
./drivers/gpu/drm/drm_gem_shmem_helper.c: linux/module.h is included more than once. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4567Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Maxime Ripard authored
This URL gets redirected to the Intel landing page now. Let's switch the webpage to freedesktop. Link: https://lore.kernel.org/r/20240306153841.698693-2-mripard@kernel.orgAcked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Maxime Ripard authored
Now that the drm-misc tree has moved to Gitlab, adjust the MAINTAINERS git trees to reflect the location change. Link: https://lore.kernel.org/r/20240306153841.698693-1-mripard@kernel.orgAcked-by:
-
