- 20 Jul, 2007 40 commits
-
-
Rusty Russell authored
Guests currently use the default scheduler clock: this means they always use jiffies even if TSC is actually available. It doesn't make any noticeable difference here, but it's a better thing to do. Also remove commented-out asm/sched-clock.h from -mm tree. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
Signed-off-by:
-
Rusty Russell authored
The sense of the IF bit is backwards in the host interrupt handling. This means we always save "IF=1" on the stack when injecting an interrupt. It turns out this is almost always correct (unless the guest is taking a page fault in an interrupt due to an unpopulated vmalloc mapping), so went unnoticed. Signed-off-by:
-
David Howells authored
Fix afs_send_simple_reply() to accept a greater-than-zero return value from rxrpc_kernel_send_data() as being a successful return rather than thinking it an error and aborting the call. rxrpc_kernel_send_data() previously returned zero incorrectly when it worked successfully, but has been patched to return the number of bytes it transmitted. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits) sh: intc - add support for SH7750 and its variants sh: Move entry point code to .text.head. sh: heartbeat: Shut up resource size warning. sh: update r2d defconfig and fix SH7751R pci compliation sh: Many symbol exports for nommu allmodconfig. sh: zero terminate 8250 platform data for r2d board sh: cpufreq: Fix up the build for SH-2. sh: Make on-chip DMA channel selection explicit. sh: Fix up CPU dependencies for on-chip DMAC. sh: cpufreq: clock framework support. sh: Support rate rounding for SH7722 FRQCR clocks. sh: Implement clk_round_rate() in the clock framework. sh: Fix up PCI section mismatch warnings. sh: Wire up fallocate() syscall. sh: intc - add support for 7780 sh: intc - improve group support sh: Fix up SH-3 and SH-4 driver dependencies. sh: push-switch: Correct license string. sh: cpufreq: Fix driver dependencies and flag as broken. sh: IPR/INTC2 IRQ setup consolidation. ...
-
Linus Torvalds authored
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (102 commits) [ALSA] version 1.0.14 [ALSA] remove duplicate Logitech Quickcam USB ID in usbquirks.h [ALSA] hda-codec - Fix input with STAC92xx [ALSA] hda-intel: support for iMac 24'' released on 09/2006 [ALSA] hda-codec - Add quirk for Asus P5LD2 [ALSA] snd-ca0106: Add support for X-Fi Extreme Audio. [ALSA] snd-emu10k1:Enable E-Mu 1616m notebook firmware loading. [ALSA] snd-emu10k1: Initial support for E-Mu 1616 and 1616m. [ALSA] cs46xx - Fix PM resume [ALSA] hda: Enable SPDIF in/out on some stac9205 boards [ALSA] timer: check for incorrect device state in non-debug compiles, too [ALSA] snd-aoa-codec-onyx: fix typo [ALSA] hda-codec - Add quirks for HP dx2200/dx2250 [ALSA] hda-codec - Rename HP model-specific quirks [ALSA] hda-codec - Add quirk for HP Samba [ALSA] hda-codec - Add LG LW20 line-in capture source [ALSA] usb-audio - Fix AC3 with M-Audio Audiophile USB [ALSA] hda: stac9202 mixer fix [ALSA] Make s3c24xx_i2s_set_clkdiv() change the correct bits [ALSA] hda-codec - Add LG LW20 si3054 modem id ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Flag sh64_get_page() as __init_refok. sh64: Move entry point code to .text.head. sh64: Fix up PCI section mismatch warnings. sh64: Update cayman defconfig. sh64: Wire up fallocate() syscall.
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'cfq' of git://git.kernel.dk/data/git/linux-2.6-block: cfq: Write-only stuff in CFQ data structures cfq: async queue allocation per priority
-
Nick Piggin authored
Update arm to use bitwise types for its VM_FAULT_ constants. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (29 commits) libata: implement EH fast drain libata: schedule probing after SError access failure during autopsy libata: clear HOTPLUG flag after a reset libata: reorganize ata_ehi_hotplugged() libata: improve SCSI scan failure handling libata: quickly trigger SATA SPD down after debouncing failed libata: improve SATA PHY speed down logic The SATA controller device ID is different according to ahci: implement SCR_NOTIFICATION r/w ahci: make NO_NCQ handling more consistent libata: make ->scr_read/write callbacks return error code libata: implement AC_ERR_NCQ libata: improve EH report formatting sata_sil24: separate out sil24_do_softreset() sata_sil24: separate out sil24_exec_polled_cmd() sata_sil24: replace sil24_update_tf() with sil24_read_tf() ahci: separate out ahci_do_softreset() ahci: separate out ahci_exec_polled_cmd() ahci: separate out ahci_kick_engine() ahci: use deadline instead of fixed timeout for 1st FIS for SRST ...
-
Matthew Wilcox authored
I recently ran Lindent over the AdvanSys driver and it moved the comments on #else and #endif lines way over to the right: #else /* ADVANSYS_DEBUG */ This doesn't match what I expect from kernel style, but it is documented. We just need another flag to indent to make this look like: #else /* ADVANSYS_DEBUG */ Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Jesper Juhl authored
Coverity found a memory leak in tpm_ascii_bios_measurements_open(). If "read_log(log)" fails, then we may leak 'log' and 'log->bios_event_log'. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Cc: Seiji Munetoh <munetoh@jp.ibm.com> Cc: Stefan Berger <stefanb@us.ibm.com> Cc: Reiner Sailer <sailer@watson.ibm.com> Cc: Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Greg Ungerer authored
Reformat show_cpuinfo() to be consistent with normal coding style (and rest of this file). Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Jesper Juhl authored
The Coverity checker noticed that we allocate too little storage for "struct cr_panel *crp" in cr_backlight_probe(). Signed-off-by:
-
Dan Williams authored
Andrew Morton: [async_memcpy] is very wrong if both ASYNC_TX_KMAP_DST and ASYNC_TX_KMAP_SRC can ever be set. We'll end up using the same kmap slot for both src add dest and we get either corrupted data or a BUG. Evgeniy Polyakov: Btw, shouldn't it always be kmap_atomic() even if flag is not set. That pages are usual one returned by alloc_page(). So fix the usage of kmap_atomic and kill the ASYNC_TX_KMAP_DST and ASYNC_TX_KMAP_SRC flags. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Nick Piggin authored
Fix page index to offset conversion overflows in buffer layer, ecryptfs, and ocfs2. It would be nice to convert the whole tree to page_offset, but for now just fix the bugs. Signed-off-by:
-
Paul Mundt authored
zone_movable_pfn is presently marked as __initdata and referenced from adjust_zone_range_for_zone_movable(), which in turn is referenced by zone_spanned_pages_in_node(). Both of these are __meminit annotated. When memory hotplug is enabled, this will oops on a hot-add, due to zone_movable_pfn having been freed. __meminitdata annotation gives the desired behaviour. This will only impact platforms that enable both memory hotplug and ARCH_POPULATES_NODE_MAP. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Adrian Bunk authored
Every file should include the headers containing the prototypes for its global functions. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Roland McGrath authored
One of the nice ideas behind paravirt is that CONFIG_XEN=y can be included in a standard configuration and be no worse for native booting than as a Xen guest. The glibc feature that supports the vDSO "nosegneg" note is designed specifically to make this easy. You just have to flip one bit at boot time. This patch makes Xen flip the bit, so a CONFIG_XEN=y kernel on bare hardware does not make glibc use the less-optimized library builds. Signed-off-by:
Roland McGrath <roland@redhat.com> Acked-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix two year old bug in early bootup asm. [SPARC64]: Update defconfig. [SPARC64]: Fix log message type in vio_create_one(). [SPARC64]: Tweak assertions in sun4v_build_virq(). [SPARC64]: Tweak kernel log messages in power_probe(). [SPARC64]: Fix handling of multiple vdc-port nodes. [SPARC64]: Fix device type matching in VIO's devspec_show(). [SPARC64]: Fix MODULE_DEVICE_TABLE() specification in VDC and VNET. [SPARC]: Add sys_fallocate() entries. [SPARC64]: Use orderly_poweroff().
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (44 commits) USB: drivers/usb/storage/dpcm.c whitespace cleanup USB: r8a66597-hcd: fixes some problem USB: change name of spinlock in hcd.c USB: move routines in hcd.c USB: misc: uss720: clean up urb->status usage USB: misc: usbtest: clean up urb->status usage USB: misc: usblcd: clean up urb->status usage USB: misc: phidgetmotorcontrol: clean up urb->status usage USB: misc: phidgetkit: clean up urb->status usage USB: misc: legousbtower: clean up urb->status usage USB: misc: ldusb: clean up urb->status usage USB: misc: iowarrior: clean up urb->status usage USB: misc: ftdi-elan: clean up urb->status usage USB: misc: auerswald: clean up urb->status usage USB: misc: appledisplay: clean up urb->status usage USB: misc: adtux: clean up urb->status usage USB: core: message: clean up urb->status usage USB: image: microtek: clean up urb->status usage USB: image: mdc800: clean up urb->status usage USB: storage: onetouch: clean up urb->status usage ...
-
Al Viro authored
Since we have use like ~SLUB_DMA, we ought to have the type set right in both cases. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
It's C, not C++... Signed-off-by:
-
Al Viro authored
It's void __user *, not void * __user... Signed-off-by:
-
Al Viro authored
Doing |= 1 << 19 to 16bit unsigned is not particulary useful; that register is 32bit, unlike the ones dealt with in the rest of function, so we need u32 variable here. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Al Viro authored
Wrong order of arguments Signed-off-by:
-
Al Viro authored
anything that wants working dma-mapping won't work parport_pc won't work on m68k unless we have ISA Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
i.e. tell modpost that entry point code (that has to be outside of .init.text for external reasons) is OK to refer to .init.* Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Tejun Heo authored
In most cases, when EH is scheduled, all in-flight commands are aborted causing EH to kick in immediately. However, in some cases (especially with PMP), it's unclear which commands are affected by the error condition and although aborting all in-flight commands work, it isn't optimal and may cause unnecessary disruption. On the other hand, waiting for in-flight commands to drain themselves can take up to 30seconds. This patch implements EH fast drain to handle such situations. It gives in-flight commands some time to finish up but doesn't wait for too long. After EH is scheduled, fast drain timer is started and if no other completion occurs in ATA_EH_FASTDRAIN_INTERVAL all in-flight commands are aborted. If any completion occurred in the interval, the port is given another interval to finish up itself. Currently ATA_EH_FASTDRAIN_INTERVAL is 3 secs which should be enough for finishing up most commands. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
If SError isn't accessible, EH can't tell whether hotplug has happened or not. Report SError read failure with AC_ERR_OTHER and schedule probing with hardreset. This will be mainly useful for PMPs. Signed-off-by:
-
Tejun Heo authored
ATA_EHI_HOTPLUGGED is a hint for reset functions indicating the the port might have gone through hotplug/unplug just before entering EH. Reset functions modify their behaviors a bit to handle the situation better - e.g. using longer debouncing delay. Currently, once HOTPLUG is set, it isn't cleared till the end of EH. This is unnecessary and makes EH take longer. Clear the HOTPLUGGED flag after a reset try (successful or not). Signed-off-by:
-
Tejun Heo authored
__ata_ehi_hotplugged() now has no users. Regorganize ata_ehi_hotplugged() such that a new function ata_ehi_schedule_probe() deals with scheduling probing. ata_ehi_hotplugged() calls it and additionally marks hotplug specific flags. ata_ehi_schedule_probe() will be used laster. Signed-off-by:
-
